Releases: inputlabs/alpakka_case
Releases · inputlabs/alpakka_case
c0.97.0
c0.96.1
Blender models
- Fixed cross-file reference paths (uppercase vs lowercase) that caused some Blender files to open incorrectly on Linux.
c0.96.0
Migration from Blender to Build123d
- We started a gradual migration into Build123d.
- Parts ported to Build123d are located in
/build123d
folder.
Scroll-wheel redesigned
- A new scroll-wheel parametrical design made in Python (Build123d).
- Both left and right axles are printed in the same part.
- The core has a bigger semicircle shape to reduce any potential tilt.
- The holder has a smaller hole, and wider base.
Triggers L1/R1 ported to Build123D.
- L1/R1 ported into parametrical design made in Python (Build123d).
- The design should be exactly the same then the previous Blender model.
Compatibility
wheel
is NOT compatible with previous versions ofwheel_core
.wheel_core
is NOT compatible with previous versions ofwheel_holder
.- The combination of
wheel
+wheel_core
+wheel_holder
is compatible with previous versions ofcase_front
c0.95.1
Scroll wheel
- Scroll wheel support width increased from 5mm to 7mm.
c0.95.0
Front case
- Fix for incorrectly applied tolerance adjustment that made the hexagon insert too tight.
L4/R4
- Fix for incorrectly applied tolerance adjustment that made the part too tight in the Y axis (the walls with the screw holes).
- Increased the screw hole diameter by 0.1mm (since the hole usually becomes smaller when printing the part upright).
Thumbstick
- New thumbstick tight variant with slightly smaller shaft hole.
- Former default thumbstick becomes the loose variant.
Home button
- Fixed export script not rotating properly the small alignment knob.
Buttons
- ABXY button STL is now a single button (it was a bundle of 4).
- Dpad button STL is now a single button (it was a bundle of 4).
- Select button STL is now a single button (it was a bundle of 4).
Triggers
- L1 and R1 and now exported as 2 different STLs, with mirroring pre-applied.
- L4 and R4 and now exported as 2 different STLs, with mirroring pre-applied.
- L2 and R2 and now exported as 2 different STLs (for consistency).
All changes are backwards compatible
c0.90.0
Scrollwheel
- Scrollwheel shaft is longer to minimize potential misalignment.
- Scrollwheel slot is deeper and has 2 ejection holes (so the shaft is easily removed if needed).
Conductive hexagon
- The loose version of the hexagon is now the default one.
- The tight version is still available as
*_tight.stl
in the release files.
Other
- Blender
.blend
files compression has been enabled, most files are now ~10% of the original size.
Incompatibilities
Scrollwheel c0.90.0
is NOT compatible with previous versions ofScrollwheel shaft
.Scrollwheel shaft c0.90.0
is NOT compatible with previous versions ofScrollwheel
.- Both
Scrollwheel
andScrollwheel shaft
are still compatible with previous versions of all the other parts.
c0.88.1
Release files changes
- New automated
Blender-to-STL
export for release. - New
STL
file naming and structure for release. - No more bundles nor
3MF
files in release. - Models with multiple parts are exported as a multipart STL.
- Models with mirrored parts are exported as a mirrored multipart STL.
Blender changes
- The loose version of
L1R1
triggers is now the default. - The loose version of
L4R4
triggers is now the default. Anchor
model is mirrored, for consistency in STL export.Scrollwheel holder
model is set as visible, for consistency in STL export.
All changes are backwards compatible.
c0.88.0
Changes
- Corrected conductive Hexagon geometry for better fit.
- Loose variant for conductive Hexagon.
- Loose variant for L1/R1 triggers.
- Loose variant for L4/R4 triggers.
- Rework of 8-Directional cap so it can be inserted with less friction.
All changes are backwards compatible.
c0.86.1
Changes
- Fixed small asymmetry on select buttons.
c0.86.0
Download blender.zip
for the source Blender files.
Download printables.zip
for STL and 3MF files.