Kernel 4 19 87 cve #9

swaroopbalan · 2019-12-13T05:04:46Z

No description provided.

[ Upstream commit 37fd167 ] When looking at a 4.18 based KASAN use after free report, I noticed that racing xfs_buf_rele() may race on dropping the last reference to the buffer and taking the buffer lock. This was the symptom displayed by the KASAN report, but the actual issue that was reported had already been fixed in 4.19-rc1 by commit e339dd8 ("xfs: use sync buffer I/O for sync delwri queue submission"). Despite this, I think there is still an issue with xfs_buf_rele() in this code: release = atomic_dec_and_lock(&bp->b_hold, &pag->pag_buf_lock); spin_lock(&bp->b_lock); if (!release) { ..... If two threads race on the b_lock after both dropping a reference and one getting dropping the last reference so release = true, we end up with: CPU 0 CPU 1 atomic_dec_and_lock() atomic_dec_and_lock() spin_lock(&bp->b_lock) spin_lock(&bp->b_lock) <spins> <release = true bp->b_lru_ref = 0> <remove from lists> freebuf = true spin_unlock(&bp->b_lock) xfs_buf_free(bp) <gets lock, reading and writing freed memory> <accesses freed memory> spin_unlock(&bp->b_lock) <reads/writes freed memory> IOWs, we can't safely take bp->b_lock after dropping the hold reference because the buffer may go away at any time after we drop that reference. However, this can be fixed simply by taking the bp->b_lock before we drop the reference. It is safe to nest the pag_buf_lock inside bp->b_lock as the pag_buf_lock is only used to serialise against lookup in xfs_buf_find() and no other locks are held over or under the pag_buf_lock there. Make this clear by documenting the buffer lock orders at the top of the file. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit efc3289 ] In the typical unmount case, the AIL is forced out by the unmount sequence before the xfsaild task is stopped. Since AIL items are removed on writeback completion, this means that the AIL ->ail_buf_list delwri queue has been drained. This is not always true in the shutdown case, however. It's possible for buffers to sit on a delwri queue for a period of time across submission attempts if said items are locked or have been relogged and pinned since first added to the queue. If the attempt to log such an item results in a log I/O error, the error processing can shutdown the fs, remove the item from the AIL, stale the buffer (dropping the LRU reference) and clear its delwri queue state. The latter bit means the buffer will be released from a delwri queue on the next submission attempt, but this might never occur if the filesystem has shutdown and the AIL is empty. This means that such buffers are held indefinitely by the AIL delwri queue across destruction of the AIL. Aside from being a memory leak, these buffers can also hold references to in-core perag structures. The latter problem manifests as a generic/475 failure, reproducing the following asserts at unmount time: XFS: Assertion failed: atomic_read(&pag->pag_ref) == 0, file: fs/xfs/xfs_mount.c, line: 151 XFS: Assertion failed: atomic_read(&pag->pag_ref) == 0, file: fs/xfs/xfs_mount.c, line: 132 To prevent this problem, clear the AIL delwri queue as a final step before xfsaild() exit. The !empty state should never occur in the normal case, so add an assert to catch unexpected problems going forward. [dgc: add comment explaining need for xfs_buf_delwri_cancel() after calling xfs_buf_delwri_submit_nowait().] Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

…bad stack [ Upstream commit c2712b8 ] Andy had some concerns about using regs_get_kernel_stack_nth() in a new function regs_get_kernel_argument() as if there's any error in the stack code, it could cause a bad memory access. To be on the safe side, call probe_kernel_read() on the stack address to be extra careful in accessing the memory. A helper function, regs_get_kernel_stack_nth_addr(), was added to just return the stack address (or NULL if not on the stack), that will be used to find the address (and could be used by other functions) and read the address with kernel_probe_read(). Requested-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20181017165951.09119177@gandalf.local.home Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 589edb5 ] Bay and Cherry Trail devices with a Dollar Cove or Whiskey Cove PMIC have an ACPI node with a HID of INT33FE which is a "virtual" battery device implementing a standard ACPI battery interface which depends upon a proprietary, undocument OpRegion called BMOP. Since we do have docs for the actual fuel-gauges used on these boards we instead use native fuel-gauge drivers talking directly to the fuel-gauge ICs on boards which rely on this INT33FE device for their battery monitoring. On boards with a Dollar Cove PMIC the INT33FE device's resources (_CRS) describe a non-existing I2C client at address 0x6b with a bus-speed of 100KHz. This is a problem on some boards since there are actual devices on that same bus which need a speed of 400KHz to function properly. This commit adds the INT33FE HID to the list of devices with I2C resources which should be enumerated as a platform-device rather then letting the i2c-core instantiate an i2c-client matching the first I2C resource, so that its bus-speed will not influence the max speed of the I2C bus. This fixes e.g. the touchscreen not working on the Teclast X98 II Plus. The INT33FE device on boards with a Whiskey Cove PMIC is somewhat special. Its first I2C resource is for a secondary I2C address of the PMIC itself, which is already described in an ACPI device with an INT34D3 HID. But it has 3 more I2C resources describing 3 other chips for which we do need to instantiate I2C clients and which need device-connections added between them for things to work properly. This special case is handled by the drivers/platform/x86/intel_cht_int33fe.c code. Before this commit that code was binding to the i2c-client instantiated for the secondary I2C address of the PMIC, since we now instantiate a platform device for the INT33FE device instead, this commit also changes the intel_cht_int33fe driver from an i2c driver to a platform driver. This also brings the intel_cht_int33fe drv inline with how we instantiate multiple i2c clients from a single ACPI device in other cases, as done by the drivers/platform/x86/i2c-multi-instantiate.c code. Reported-and-tested-by: Alexander Meiler <alex.meiler@protonmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 2c9b7f8 ] A caller of pm_genpd_init() that provides some states for the genpd via the ->states pointer in the struct generic_pm_domain, should also provide a governor. This because it's the job of the governor to pick a state that satisfies the constraints. Therefore, let's print a warning to inform the user about such bogus configuration and avoid to bail out, by instead picking the shallowest state before genpd invokes the ->power_off() callback. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit eb7ebfa ] Compiling with clang yields the following warning: sound/i2c/cs8427.c:140:31: warning: implicit conversion from 'int' to 'char' changes value from 160 to -96 [-Wconstant-conversion] data[0] = CS8427_REG_AUTOINC | CS8427_REG_CORU_DATABUF; ~ ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ Because CS8427_REG_AUTOINC is defined as 128, it is too big for a char field. So change data from char to unsigned char, that it can hold the value. This patch does not change the generated code. Signed-off-by: Philipp Klocke <philipp97kl@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit fc0c8b3 ] There's some antiquated debug output that's trying to do a hand-made hexdump and turning into horrible 1-byte-per-line output these days. Use print_hex_dump() instead Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit dc8af3a ] The VMD removal path calls pci_stop_root_busi(), which tears down the pcie tree, including detaching all of the attached drivers. During driver detachment, devices may use pci_release_region() to release resources. This path relies on the resource being accessible in resource tree. By detaching the child domain from the parent resource domain prior to stopping the bus, we are preventing the list traversal from finding the resource to be freed. If we instead detach the resource after stopping the bus, we will have properly freed the resource and detaching is simply accounting at that point. Without this order, the resource is never freed and is orphaned on VMD removal, leading to a warning: [ 181.940162] Trying to free nonexistent resource <e5a10000-e5a13fff> Fixes: 2c2c5c5 ("x86/PCI: VMD: Attach VMD resources to parent domain's resource tree") Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 0901585 ] Upon success the update_status handler returns a positive number corresponding to the number of bytes transferred by usb_control_msg. However the return code of the update_status handler should indicate if an error occurred(negative) or how many bytes of the user's input to sysfs that was consumed. Return code zero indicates all bytes were consumed. The bug can for example result in the update_status handler being called twice, the second time with only the "unconsumed" part of the user's input to sysfs. Effectively setting an incorrect brightness. Change the update_status handler to return zero for all successful transactions and forward usb_control_msg's error code upon failure. Signed-off-by: Mattias Jacobsson <2pi@mok.nu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e325808 ] Currently the call to atoi is being passed a single char string that is not null terminated, so there is a potential read overrun along the stack when parsing for an integer value. Fix this by instead using a 2 char string that is initialized to all zeros to ensure that a 1 char read into the string is always terminated with a \0. Detected by cppcheck: "Invalid atoi() argument nr 1. A nul-terminated string is required." Fixes: 3391ba0 ("usbip: tools: Extract generic code to be shared with vudc backend") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit cd305c7 ] sk->sk_wmem_queued is used to count the size of chunks in out queue while sk->sk_wmem_alloc is for counting the size of chunks has been sent. sctp is increasing both of them before enqueuing the chunks, and using sk->sk_wmem_alloc to check for writable space. However, sk_wmem_alloc is also increased by 1 for the skb allocked for sending in sctp_packet_transmit() but it will not wake up the waiters when sk_wmem_alloc is decreased in this skb's destructor. If msg size is equal to sk_sndbuf and sendmsg is waiting for sndbuf, the check 'msg_len <= sctp_wspace(asoc)' in sctp_wait_for_sndbuf() will keep waiting if there's a skb allocked in sctp_packet_transmit, and later even if this skb got freed, the waiting thread will never get waked up. This issue has been there since very beginning, so we change to use sk->sk_wmem_queued to check for writable space as sk_wmem_queued is not increased for the skb allocked for sending, also as TCP does. SOCK_SNDBUF_LOCK check is also removed here as it's for tx buf auto tuning which I will add in another patch. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d857ad7 ] With raid4/5/6, journal device and write intent bitmap are mutually exclusive. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 1bd70d2 ] FILE pointer variable f is opened but never closed. Signed-off-by: Peng Hao <peng.hao2@zte.com.cn> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e732f44 ] Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 826799e ] Commits ffb6ca3 and e08ea3a prevent setting xprt_min_resvport greater than xprt_max_resvport, but may also break simple code that sets one parameter then the other, if the new range does not overlap the old. Also it looks racy to me, unless there's some serialization I'm not seeing. Granted it would probably require malicious privileged processes (unless there's a chance these might eventually be settable in unprivileged containers), but still it seems better not to let userspace panic the kernel. Simpler seems to be to allow setting the parameters to whatever you want but interpret xprt_min_resvport > xprt_max_resvport as the empty range. Fixes: ffb6ca3 "sunrpc: Prevent resvport min/max inversion..." Fixes: e08ea3a "sunrpc: Prevent rexvport min/max inversion..." Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 64b9d16 ] Clang warns: drivers/atm/zatm.c:513:7: error: while loop has empty body [-Werror,-Wempty-body] zwait; ^ drivers/atm/zatm.c:513:7: note: put the semicolon on a separate line to silence this warning Get rid of this warning by using an empty do-while loop. While we're at it, add parentheses to make it clear that this is a function-like macro. Link: ClangBuiltLinux/linux#42 Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit ec0c0bb ] Return an error when the function debug_register() fails allocating the debug handle. Also remove the registered debug handle when the initialization fails later on. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 8088546 ] All properly written drivers now have error handling in the dma_map_single / dma_map_page callers. As swiotlb_tbl_map_single already prints a useful warning when running out of swiotlb pool space we can also remove swiotlb_full entirely as it serves no purpose now. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b682cff ] McSPI has 32 byte FIFO in Transmit-Receive mode. Current code tries to configuration FIFO watermark level for DMA trigger to be GCD of transfer length and max FIFO size which would mean trigger level may be set to 32 for transmit-receive mode if length is aligned. This does not work in case of SPI slave mode where FIFO always needs to have data ready whenever master starts the clock. With DMA trigger size of 32 there will be a small window during slave TX where DMA is still putting data into FIFO but master would have started clock for next byte, resulting in shifting out of stale data. Similarly, on Slave RX side there may be RX FIFO overflow Fix this by setting FIFO watermark for DMA trigger to word length. This means DMA is triggered as soon as FIFO has space for word length bytes and DMA would make sure FIFO is almost always full therefore improving FIFO occupancy in both master and slave mode. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b61b8bb ] When the last CPU in an rdt_domain goes offline, its rdt_domain struct gets freed. Current pseudo-locking code is unaware of this scenario and tries to dereference the freed structure in a few places. Add checks to prevent pseudo-locking code from doing this. While further work is needed to seamlessly restore resource groups (not just pseudo-locking) to their configuration when the domain is brought back online, the immediate issue of invalid pointers is addressed here. Fixes: f4e80d6 ("x86/intel_rdt: Resctrl files reflect pseudo-locked information") Fixes: 443810f ("x86/intel_rdt: Create debugfs files for pseudo-locking testing") Fixes: 746e085 ("x86/intel_rdt: Create character device exposing pseudo-locked region") Fixes: 33dc3e4 ("x86/intel_rdt: Make CPU information accessible for pseudo-locked regions") Signed-off-by: Jithu Joseph <jithu.joseph@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: fenghua.yu@intel.com Cc: tony.luck@intel.com Cc: gavin.hindman@intel.com Cc: hpa@zytor.com Link: https://lkml.kernel.org/r/231f742dbb7b00a31cc104416860e27dba6b072d.1539384145.git.reinette.chatre@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 46b8306 ] If PARPORT_PC_FIFO is not enabled, do not provide the dma lock macros and lock definition. Otherwise: ./arch/sparc/include/asm/parport.h:24:24: warning: ‘dma_spin_lock’ defined but not used [-Wunused-variable] static DEFINE_SPINLOCK(dma_spin_lock); ^~~~~~~~~~~~~ ./include/linux/spinlock_types.h:81:39: note: in definition of macro ‘DEFINE_SPINLOCK’ #define DEFINE_SPINLOCK(x) spinlock_t x = __SPIN_LOCK_UNLOCKED(x) Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f4445bb ] There is a NULL pointer dereference in case *slot* happens to be NULL at lines 1053 and 1878: struct hisi_sas_cq *cq = &hisi_hba->cq[slot->dlvry_queue]; Notice that *slot* is being NULL checked at lines 1057 and 1881: if (slot), which implies it may be NULL. Fix this by placing the declaration and definition of variable cq, which contains the pointer dereference slot->dlvry_queue, after slot has been properly NULL checked. Addresses-Coverity-ID: 1474515 ("Dereference before null check") Addresses-Coverity-ID: 1474520 ("Dereference before null check") Fixes: 584f53f ("scsi: hisi_sas: Fix the race between IO completion and timeout for SMP/internal IO") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c6c26fb ] This patch exports the raw per-CPU VPA data via debugfs. A per-CPU file is created which exports the VPA data of that CPU to help debug some of the VPA related issues or to analyze the per-CPU VPA related statistics. v3: Removed offline CPU check. v2: Included offline CPU check and other review comments. Signed-off-by: Aravinda Prasad <aravinda@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 5c6499b ] When we have CONFIG_STRICT_KERNEL_RWX enabled, we try to split the kernel linear (1:1) mapping so that the kernel text is in a separate page to kernel data, so we can mark the former read-only. We could achieve that just by always using 64K pages for the linear mapping, but we try to be smarter. Instead we use huge pages when possible, and only switch to smaller pages when necessary. However we have an off-by-one bug in that logic, which causes us to calculate the wrong boundary between text and data. For example with the end of the kernel text at 16M we see: radix-mmu: Mapped 0x0000000000000000-0x0000000001200000 with 64.0 KiB pages radix-mmu: Mapped 0x0000000001200000-0x0000000040000000 with 2.00 MiB pages radix-mmu: Mapped 0x0000000040000000-0x0000000100000000 with 1.00 GiB pages ie. we mapped from 0 to 18M with 64K pages, even though the boundary between text and data is at 16M. With the fix we see we're correctly hitting the 16M boundary: radix-mmu: Mapped 0x0000000000000000-0x0000000001000000 with 64.0 KiB pages radix-mmu: Mapped 0x0000000001000000-0x0000000040000000 with 2.00 MiB pages radix-mmu: Mapped 0x0000000040000000-0x0000000100000000 with 1.00 GiB pages Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 3b5657e ] When we have CONFIG_STRICT_KERNEL_RWX enabled, we want to split the linear mapping at the text/data boundary so we can map the kernel text read only. But the current logic uses small pages for the entire text section, regardless of whether a larger page size would fit. eg. with the boundary at 16M we could use 2M pages, but instead we use 64K pages up to the 16M boundary: Mapped 0x0000000000000000-0x0000000001000000 with 64.0 KiB pages Mapped 0x0000000001000000-0x0000000040000000 with 2.00 MiB pages Mapped 0x0000000040000000-0x0000000100000000 with 1.00 GiB pages This is because the test is checking if addr is < __init_begin and addr + mapping_size is >= _stext. But that is true for all pages between _stext and __init_begin. Instead what we want to check is if we are crossing the text/data boundary, which is at __init_begin. With that fixed we see: Mapped 0x0000000000000000-0x0000000000e00000 with 2.00 MiB pages Mapped 0x0000000000e00000-0x0000000001000000 with 64.0 KiB pages Mapped 0x0000000001000000-0x0000000040000000 with 2.00 MiB pages Mapped 0x0000000040000000-0x0000000100000000 with 1.00 GiB pages ie. we're correctly using 2MB pages below __init_begin, but we still drop down to 64K pages unnecessarily at the boundary. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 81d1b54 ] When we have CONFIG_STRICT_KERNEL_RWX enabled, we want to split the linear mapping at the text/data boundary so we can map the kernel text read only. Currently we always use a small page at the text/data boundary, even when that's not necessary: Mapped 0x0000000000000000-0x0000000000e00000 with 2.00 MiB pages Mapped 0x0000000000e00000-0x0000000001000000 with 64.0 KiB pages Mapped 0x0000000001000000-0x0000000040000000 with 2.00 MiB pages This is because the check that the mapping crosses the __init_begin boundary is too strict, it also returns true when we map exactly up to the boundary. So fix it to check that the mapping would actually map past __init_begin, and with that we see: Mapped 0x0000000000000000-0x0000000040000000 with 2.00 MiB pages Mapped 0x0000000040000000-0x0000000100000000 with 1.00 GiB pages Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>

… pmd [ Upstream commit dd76ff5 ] Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c5fa5d6 ] The return value for each test in test_libbpf.sh is compared with if (( $? == 0 )) ; then ... This works well with bash, but not with dash, that /bin/sh is aliased to on some systems (such as Ubuntu). Let's replace this comparison by something that works on both shells. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit fe8eccc ] When trying to complete "bpftool map update" commands, the call to printf would print an error message that would show on the command line if no map is found to complete the command line. Fix it by making sure we have map ids to complete the line with, before we try to print something. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c58f450 ] Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 7962ef1 ] In 3cb4d5e ("perf trace: Free syscall tp fields in evsel->priv") it only was freeing if strcmp(evsel->tp_format->system, "syscalls") returned zero, while the corresponding initialization of evsel->priv was being performed if it was _not_ zero, i.e. if the tp system wasn't 'syscalls'. Just stop looking for that and free it if evsel->priv was set, which should be equivalent. Also use the pre-existing evsel_trace__delete() function. This resolves these leaks, detected with: $ make EXTRA_CFLAGS="-fsanitize=address" BUILD_BPF_SKEL=1 CORESIGHT=1 O=/tmp/build/perf-tools-next -C tools/perf install-bin ================================================================= ==481565==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097) #1 0x987966 in zalloc (/home/acme/bin/perf+0x987966) #2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307 #3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333 #4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458 #5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480 #6 0x540e8b in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3212 #7 0x540e8b in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891 #8 0x540e8b in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156 #9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323 #10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377 #11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421 #12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537 #13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f) Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097) #1 0x987966 in zalloc (/home/acme/bin/perf+0x987966) #2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307 #3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333 #4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458 #5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480 #6 0x540dd1 in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3205 #7 0x540dd1 in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891 #8 0x540dd1 in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156 #9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323 #10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377 #11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421 #12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537 #13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f) SUMMARY: AddressSanitizer: 80 byte(s) leaked in 2 allocation(s). [root@quaco ~]# With this we plug all leaks with "perf trace sleep 1". Fixes: 3cb4d5e ("perf trace: Free syscall tp fields in evsel->priv") Acked-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Link: https://lore.kernel.org/lkml/20230719202951.534582-5-acme@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a154f5f ] The following call trace shows a deadlock issue due to recursive locking of mutex "device_mutex". First lock acquire is in target_for_each_device() and second in target_free_device(). PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx" #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f #1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224 #2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee #3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7 #4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3 #5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c #6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod] #7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod] #8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f #9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583 #10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod] #11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc #12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod] #13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod] #14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod] #15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod] #16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07 #17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod] #18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod] #19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080 #20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364 Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion") Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230918225848.66463-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 830a2a4 upstream. If a BTI exception is taken from EL1, the entry code will treat this as an unhandled exception and will panic() the kernel. This is inconsistent with the way we handle FPAC exceptions, which have a dedicated handler and only necessarily kill the thread from which the exception was taken from, and we don't log all the information that could be relevant to debug the issue. The code in do_bti() has: BUG_ON(!user_mode(regs)); ... and it seems like the intent was to call this for EL1 BTI exceptions, as with FPAC, but this was omitted due to an oversight. This patch adds separate EL0 and EL1 BTI exception handlers, with the latter calling die() directly to report the original context the BTI exception was taken from. This matches our handling of FPAC exceptions. Prior to this patch, a BTI failure is reported as: | Unhandled 64-bit el1h sync exception on CPU0, ESR 0x0000000034000002 -- BTI | CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-rc3-00131-g7d937ff0221d-dirty #9 | Hardware name: linux,dummy-virt (DT) | pstate: 20400809 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=-c) | pc : test_bti_callee+0x4/0x10 | lr : test_bti_caller+0x1c/0x28 | sp : ffff80000800bdf0 | x29: ffff80000800bdf0 x28: 0000000000000000 x27: 0000000000000000 | x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 | x23: ffff80000a2b8000 x22: 0000000000000000 x21: 0000000000000000 | x20: ffff8000099fa5b0 x19: ffff800009ff7000 x18: fffffbfffda37000 | x17: 3120676e696d7573 x16: 7361202c6e6f6974 x15: 0000000041a90000 | x14: 0040000000000041 x13: 0040000000000001 x12: ffff000001a90000 | x11: fffffbfffda37480 x10: 0068000000000703 x9 : 0001000040000000 | x8 : 0000000000090000 x7 : 0068000000000f03 x6 : 0060000000000f83 | x5 : ffff80000a2b6000 x4 : ffff0000028d0000 x3 : ffff800009f78378 | x2 : 0000000000000000 x1 : 0000000040210000 x0 : ffff8000080257e4 | Kernel panic - not syncing: Unhandled exception | CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-rc3-00131-g7d937ff0221d-dirty #9 | Hardware name: linux,dummy-virt (DT) | Call trace: | dump_backtrace.part.0+0xcc/0xe0 | show_stack+0x18/0x5c | dump_stack_lvl+0x64/0x80 | dump_stack+0x18/0x34 | panic+0x170/0x360 | arm64_exit_nmi.isra.0+0x0/0x80 | el1h_64_sync_handler+0x64/0xd0 | el1h_64_sync+0x64/0x68 | test_bti_callee+0x4/0x10 | smp_cpus_done+0xb0/0xbc | smp_init+0x7c/0x8c | kernel_init_freeable+0x128/0x28c | kernel_init+0x28/0x13c | ret_from_fork+0x10/0x20 With this patch applied, a BTI failure is reported as: | Internal error: Oops - BTI: 0000000034000002 [#1] PREEMPT SMP | Modules linked in: | CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-rc3-00132-g0ad98265d582-dirty #8 | Hardware name: linux,dummy-virt (DT) | pstate: 20400809 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=-c) | pc : test_bti_callee+0x4/0x10 | lr : test_bti_caller+0x1c/0x28 | sp : ffff80000800bdf0 | x29: ffff80000800bdf0 x28: 0000000000000000 x27: 0000000000000000 | x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 | x23: ffff80000a2b8000 x22: 0000000000000000 x21: 0000000000000000 | x20: ffff8000099fa5b0 x19: ffff800009ff7000 x18: fffffbfffda37000 | x17: 3120676e696d7573 x16: 7361202c6e6f6974 x15: 0000000041a90000 | x14: 0040000000000041 x13: 0040000000000001 x12: ffff000001a90000 | x11: fffffbfffda37480 x10: 0068000000000703 x9 : 0001000040000000 | x8 : 0000000000090000 x7 : 0068000000000f03 x6 : 0060000000000f83 | x5 : ffff80000a2b6000 x4 : ffff0000028d0000 x3 : ffff800009f78378 | x2 : 0000000000000000 x1 : 0000000040210000 x0 : ffff800008025804 | Call trace: | test_bti_callee+0x4/0x10 | smp_cpus_done+0xb0/0xbc | smp_init+0x7c/0x8c | kernel_init_freeable+0x128/0x28c | kernel_init+0x28/0x13c | ret_from_fork+0x10/0x20 | Code: d50323bf d53cd040 d65f03c0 d503233f (d50323bf) Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Alexandru Elisei <alexandru.elisei@arm.com> Cc: Amit Daniel Kachhap <amit.kachhap@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20220913101732.3925290-6-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit a154f5f ] The following call trace shows a deadlock issue due to recursive locking of mutex "device_mutex". First lock acquire is in target_for_each_device() and second in target_free_device(). PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx" #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f #1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224 #2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee #3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7 #4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3 #5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c #6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod] #7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod] #8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f #9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583 #10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod] #11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc #12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod] #13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod] #14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod] #15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod] #16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07 #17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod] #18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod] #19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080 #20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364 Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion") Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230918225848.66463-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a84fbf205609313594b86065c67e823f09ebe29b ] Generating metrics llc_code_read_mpi_demand_plus_prefetch, llc_data_read_mpi_demand_plus_prefetch, llc_miss_local_memory_bandwidth_read, llc_miss_local_memory_bandwidth_write, nllc_miss_remote_memory_bandwidth_read, memory_bandwidth_read, memory_bandwidth_write, uncore_frequency, upi_data_transmit_bw, C2_Pkg_Residency, C3_Core_Residency, C3_Pkg_Residency, C6_Core_Residency, C6_Pkg_Residency, C7_Core_Residency, C7_Pkg_Residency, UNCORE_FREQ and tma_info_system_socket_clks would trigger an address sanitizer heap-buffer-overflows on a SkylakeX. ``` ==2567752==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x5020003ed098 at pc 0x5621a816654e bp 0x7fffb55d4da0 sp 0x7fffb55d4d98 READ of size 4 at 0x5020003eee78 thread T0 #0 0x558265d6654d in aggr_cpu_id__is_empty tools/perf/util/cpumap.c:694:12 #1 0x558265c914da in perf_stat__get_aggr tools/perf/builtin-stat.c:1490:6 #2 0x558265c914da in perf_stat__get_global_cached tools/perf/builtin-stat.c:1530:9 #3 0x558265e53290 in should_skip_zero_counter tools/perf/util/stat-display.c:947:31 #4 0x558265e53290 in print_counter_aggrdata tools/perf/util/stat-display.c:985:18 #5 0x558265e51931 in print_counter tools/perf/util/stat-display.c:1110:3 #6 0x558265e51931 in evlist__print_counters tools/perf/util/stat-display.c:1571:5 #7 0x558265c8ec87 in print_counters tools/perf/builtin-stat.c:981:2 #8 0x558265c8cc71 in cmd_stat tools/perf/builtin-stat.c:2837:3 #9 0x558265bb9bd4 in run_builtin tools/perf/perf.c:323:11 #10 0x558265bb98eb in handle_internal_command tools/perf/perf.c:377:8 #11 0x558265bb9389 in run_argv tools/perf/perf.c:421:2 #12 0x558265bb9389 in main tools/perf/perf.c:537:3 ``` The issue was the use of testing a cpumap with NULL rather than using empty, as a map containing the dummy value isn't NULL and the -1 results in an empty aggr map being allocated which legitimately overflows when any member is accessed. Fixes: 8a96f45 ("perf stat: Avoid SEGV if core.cpus isn't set") Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230906003912.3317462-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit ede72dca45b1893f3e9236b6ad6c4e790db232f6 ] Fuzzing found that an invalid tracepoint name would create a memory leak with an address sanitizer build: ``` $ perf stat -e '*:o/' true event syntax error: '*:o/' \___ parser error Run 'perf list' for a list of valid events Usage: perf stat [<options>] [<command>] -e, --event <event> event selector. use 'perf list' to list available events ================================================================= ==59380==ERROR: LeakSanitizer: detected memory leaks Direct leak of 4 byte(s) in 2 object(s) allocated from: #0 0x7f38ac07077b in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:439 #1 0x55f2f41be73b in str util/parse-events.l:49 #2 0x55f2f41d08e8 in parse_events_lex util/parse-events.l:338 #3 0x55f2f41dc3b1 in parse_events_parse util/parse-events-bison.c:1464 #4 0x55f2f410b8b3 in parse_events__scanner util/parse-events.c:1822 #5 0x55f2f410d1b9 in __parse_events util/parse-events.c:2094 #6 0x55f2f410e57f in parse_events_option util/parse-events.c:2279 #7 0x55f2f4427b56 in get_value tools/lib/subcmd/parse-options.c:251 #8 0x55f2f4428d98 in parse_short_opt tools/lib/subcmd/parse-options.c:351 #9 0x55f2f4429d80 in parse_options_step tools/lib/subcmd/parse-options.c:539 #10 0x55f2f442acb9 in parse_options_subcommand tools/lib/subcmd/parse-options.c:654 #11 0x55f2f3ec99fc in cmd_stat tools/perf/builtin-stat.c:2501 #12 0x55f2f4093289 in run_builtin tools/perf/perf.c:322 #13 0x55f2f40937f5 in handle_internal_command tools/perf/perf.c:375 #14 0x55f2f4093bbd in run_argv tools/perf/perf.c:419 #15 0x55f2f409412b in main tools/perf/perf.c:535 SUMMARY: AddressSanitizer: 4 byte(s) leaked in 2 allocation(s). ``` Fix by adding the missing destructor. Fixes: 865582c ("perf tools: Adds the tracepoint name parsing support") Signed-off-by: Ian Rogers <irogers@google.com> Cc: He Kuang <hekuang@huawei.com> Link: https://lore.kernel.org/r/20230914164028.363220-1-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit d8b90d600aff181936457f032d116dbd8534db06 upstream. When scanning namespaces, it is possible to get valid data from the first call to nvme_identify_ns() in nvme_alloc_ns(), but not from the second call in nvme_update_ns_info_block(). In particular, if the NSID becomes inactive between the two commands, a storage device may return a buffer filled with zero as per 4.1.5.1. In this case, we can get a kernel crash due to a divide-by-zero in blk_stack_limits() because ns->lba_shift will be set to zero. PID: 326 TASK: ffff95fec3cd8000 CPU: 29 COMMAND: "kworker/u98:10" #0 [ffffad8f8702f9e0] machine_kexec at ffffffff91c76ec7 #1 [ffffad8f8702fa38] __crash_kexec at ffffffff91dea4fa #2 [ffffad8f8702faf8] crash_kexec at ffffffff91deb788 #3 [ffffad8f8702fb00] oops_end at ffffffff91c2e4bb #4 [ffffad8f8702fb20] do_trap at ffffffff91c2a4ce #5 [ffffad8f8702fb70] do_error_trap at ffffffff91c2a595 #6 [ffffad8f8702fbb0] exc_divide_error at ffffffff928506e6 #7 [ffffad8f8702fbd0] asm_exc_divide_error at ffffffff92a00926 [exception RIP: blk_stack_limits+434] RIP: ffffffff92191872 RSP: ffffad8f8702fc80 RFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff95efa0c91800 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001 RBP: 00000000ffffffff R8: ffff95fec7df35a8 R9: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff95fed33c09a8 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ffffad8f8702fce0] nvme_update_ns_info_block at ffffffffc06d3533 [nvme_core] #9 [ffffad8f8702fd18] nvme_scan_ns at ffffffffc06d6fa7 [nvme_core] This happened when the check for valid data was moved out of nvme_identify_ns() into one of the callers. Fix this by checking in both callers. Link: https://bugzilla.kernel.org/show_bug.cgi?id=218186 Fixes: 0dd6fff ("nvme: bring back auto-removal of deleted namespaces during sequential scan") Cc: stable@vger.kernel.org Signed-off-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit a84fbf205609313594b86065c67e823f09ebe29b ] Generating metrics llc_code_read_mpi_demand_plus_prefetch, llc_data_read_mpi_demand_plus_prefetch, llc_miss_local_memory_bandwidth_read, llc_miss_local_memory_bandwidth_write, nllc_miss_remote_memory_bandwidth_read, memory_bandwidth_read, memory_bandwidth_write, uncore_frequency, upi_data_transmit_bw, C2_Pkg_Residency, C3_Core_Residency, C3_Pkg_Residency, C6_Core_Residency, C6_Pkg_Residency, C7_Core_Residency, C7_Pkg_Residency, UNCORE_FREQ and tma_info_system_socket_clks would trigger an address sanitizer heap-buffer-overflows on a SkylakeX. ``` ==2567752==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x5020003ed098 at pc 0x5621a816654e bp 0x7fffb55d4da0 sp 0x7fffb55d4d98 READ of size 4 at 0x5020003eee78 thread T0 #0 0x558265d6654d in aggr_cpu_id__is_empty tools/perf/util/cpumap.c:694:12 #1 0x558265c914da in perf_stat__get_aggr tools/perf/builtin-stat.c:1490:6 #2 0x558265c914da in perf_stat__get_global_cached tools/perf/builtin-stat.c:1530:9 #3 0x558265e53290 in should_skip_zero_counter tools/perf/util/stat-display.c:947:31 #4 0x558265e53290 in print_counter_aggrdata tools/perf/util/stat-display.c:985:18 #5 0x558265e51931 in print_counter tools/perf/util/stat-display.c:1110:3 #6 0x558265e51931 in evlist__print_counters tools/perf/util/stat-display.c:1571:5 #7 0x558265c8ec87 in print_counters tools/perf/builtin-stat.c:981:2 #8 0x558265c8cc71 in cmd_stat tools/perf/builtin-stat.c:2837:3 #9 0x558265bb9bd4 in run_builtin tools/perf/perf.c:323:11 #10 0x558265bb98eb in handle_internal_command tools/perf/perf.c:377:8 #11 0x558265bb9389 in run_argv tools/perf/perf.c:421:2 #12 0x558265bb9389 in main tools/perf/perf.c:537:3 ``` The issue was the use of testing a cpumap with NULL rather than using empty, as a map containing the dummy value isn't NULL and the -1 results in an empty aggr map being allocated which legitimately overflows when any member is accessed. Fixes: 8a96f45 ("perf stat: Avoid SEGV if core.cpus isn't set") Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230906003912.3317462-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e3e82fcb79eeb3f1a88a89f676831773caff514a ] When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be dereferenced as wrong struct in irdma_free_pending_cqp_request(). PID: 3669 TASK: ffff88aef892c000 CPU: 28 COMMAND: "kworker/28:0" #0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34 #1 [fffffe0000549e40] nmi_handle at ffffffff810788b2 #2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f #3 [fffffe0000549eb8] do_nmi at ffffffff81079582 #4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4 [exception RIP: native_queued_spin_lock_slowpath+1291] RIP: ffffffff8127e72b RSP: ffff88aa841ef778 RFLAGS: 00000046 RAX: 0000000000000000 RBX: ffff88b01f849700 RCX: ffffffff8127e47e RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff83857ec0 RBP: ffff88afe3e4efc8 R8: ffffed15fc7c9dfa R9: ffffed15fc7c9dfa R10: 0000000000000001 R11: ffffed15fc7c9df9 R12: 0000000000740000 R13: ffff88b01f849708 R14: 0000000000000003 R15: ffffed1603f092e1 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 -- <NMI exception stack> -- #5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b #6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4 #7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363 #8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma] #9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma] #10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma] #11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma] #12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb #13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6 #14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278 #15 [ffff88aa841efb88] device_del at ffffffff82179d23 #16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice] #17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice] #18 [ffff88aa841efde8] process_one_work at ffffffff811c589a #19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff #20 [ffff88aa841eff10] kthread at ffffffff811d87a0 #21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f Fixes: 44d9e52 ("RDMA/irdma: Implement device initialization definitions") Link: https://lore.kernel.org/r/20231130081415.891006-1-lishifeng@sangfor.com.cn Suggested-by: "Ismail, Mustafa" <mustafa.ismail@intel.com> Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

@smb

commit b35858b3786ddbb56e1c35138ba25d6adf8d0bef upstream. Validate @smb->WordCount to avoid reading off the end of @smb and thus causing the following KASAN splat: BUG: KASAN: slab-out-of-bounds in smbCalcSize+0x32/0x40 [cifs] Read of size 2 at addr ffff88801c024ec5 by task cifsd/1328 CPU: 1 PID: 1328 Comm: cifsd Not tainted 6.7.0-rc5 #9 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x4a/0x80 print_report+0xcf/0x650 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __phys_addr+0x46/0x90 kasan_report+0xd8/0x110 ? smbCalcSize+0x32/0x40 [cifs] ? smbCalcSize+0x32/0x40 [cifs] kasan_check_range+0x105/0x1b0 smbCalcSize+0x32/0x40 [cifs] checkSMB+0x162/0x370 [cifs] ? __pfx_checkSMB+0x10/0x10 [cifs] cifs_handle_standard+0xbc/0x2f0 [cifs] ? srso_alias_return_thunk+0x5/0xfbef5 cifs_demultiplex_thread+0xed1/0x1360 [cifs] ? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs] ? srso_alias_return_thunk+0x5/0xfbef5 ? lockdep_hardirqs_on_prepare+0x136/0x210 ? __pfx_lock_release+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? mark_held_locks+0x1a/0x90 ? lockdep_hardirqs_on_prepare+0x136/0x210 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __kthread_parkme+0xce/0xf0 ? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs] kthread+0x18d/0x1d0 ? kthread+0xdb/0x1d0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x60 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> This fixes CVE-2023-6606. Reported-by: j51569436@gmail.com Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218218 Cc: stable@vger.kernel.org Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

@smb

[ Upstream commit b35858b3786ddbb56e1c35138ba25d6adf8d0bef ] Validate @smb->WordCount to avoid reading off the end of @smb and thus causing the following KASAN splat: BUG: KASAN: slab-out-of-bounds in smbCalcSize+0x32/0x40 [cifs] Read of size 2 at addr ffff88801c024ec5 by task cifsd/1328 CPU: 1 PID: 1328 Comm: cifsd Not tainted 6.7.0-rc5 #9 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x4a/0x80 print_report+0xcf/0x650 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __phys_addr+0x46/0x90 kasan_report+0xd8/0x110 ? smbCalcSize+0x32/0x40 [cifs] ? smbCalcSize+0x32/0x40 [cifs] kasan_check_range+0x105/0x1b0 smbCalcSize+0x32/0x40 [cifs] checkSMB+0x162/0x370 [cifs] ? __pfx_checkSMB+0x10/0x10 [cifs] cifs_handle_standard+0xbc/0x2f0 [cifs] ? srso_alias_return_thunk+0x5/0xfbef5 cifs_demultiplex_thread+0xed1/0x1360 [cifs] ? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs] ? srso_alias_return_thunk+0x5/0xfbef5 ? lockdep_hardirqs_on_prepare+0x136/0x210 ? __pfx_lock_release+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? mark_held_locks+0x1a/0x90 ? lockdep_hardirqs_on_prepare+0x136/0x210 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __kthread_parkme+0xce/0xf0 ? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs] kthread+0x18d/0x1d0 ? kthread+0xdb/0x1d0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x60 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> This fixes CVE-2023-6606. Reported-by: j51569436@gmail.com Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218218 Cc: stable@vger.kernel.org Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

Make sure to return a proper negative error code from copy_process() when anon_inode_getfile() fails with CLONE_PIDFD. Otherwise _do_fork() will not detect an error and get_task_pid() will operator on a nonsensical pointer: R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dbc2c R13: 00007ffc15fbb0ff R14: 00007ff07e47e9c0 R15: 0000000000000000 kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 7990 Comm: syz-executor290 Not tainted 5.2.0-rc6+ #9 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__read_once_size include/linux/compiler.h:194 [inline] RIP: 0010:get_task_pid+0xe1/0x210 kernel/pid.c:372 Code: 89 ff e8 62 27 5f 00 49 8b 07 44 89 f1 4c 8d bc c8 90 01 00 00 eb 0c e8 0d fe 25 00 49 81 c7 38 05 00 00 4c 89 f8 48 c1 e8 03 <80> 3c 18 00 74 08 4c 89 ff e8 31 27 5f 00 4d 8b 37 e8 f9 47 12 00 RSP: 0018:ffff88808a4a7d78 EFLAGS: 00010203 RAX: 00000000000000a7 RBX: dffffc0000000000 RCX: ffff888088180600 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88808a4a7d90 R08: ffffffff814fb3a8 R09: ffffed1015d66bf8 R10: ffffed1015d66bf8 R11: 1ffff11015d66bf7 R12: 0000000000041ffc R13: 1ffff11011494fbc R14: 0000000000000000 R15: 000000000000053d FS: 00007ff07e47e700(0000) GS:ffff8880aeb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004b5100 CR3: 0000000094df2000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: _do_fork+0x1b9/0x5f0 kernel/fork.c:2360 __do_sys_clone kernel/fork.c:2454 [inline] __se_sys_clone kernel/fork.c:2448 [inline] __x64_sys_clone+0xc1/0xd0 kernel/fork.c:2448 do_syscall_64+0xfe/0x140 arch/x86/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x49/0xbe Bug: 254441685 Link: https://lore.kernel.org/lkml/000000000000e0dc0d058c9e7142@google.com Reported-and-tested-by: syzbot+002e636502bc4b64eb5c@syzkaller.appspotmail.com Fixes: 6fd2fe4 ("copy_process(): don't use ksys_close() on cleanups") Cc: Jann Horn <jannh@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Christian Brauner <christian@brauner.io> (cherry picked from commit 28dd29c) Signed-off-by: Lee Jones <joneslee@google.com> Change-Id: I4a4dc811d3139dadbe64c17e3ca26feb4e3b47fe

commit d8b90d600aff181936457f032d116dbd8534db06 upstream. When scanning namespaces, it is possible to get valid data from the first call to nvme_identify_ns() in nvme_alloc_ns(), but not from the second call in nvme_update_ns_info_block(). In particular, if the NSID becomes inactive between the two commands, a storage device may return a buffer filled with zero as per 4.1.5.1. In this case, we can get a kernel crash due to a divide-by-zero in blk_stack_limits() because ns->lba_shift will be set to zero. PID: 326 TASK: ffff95fec3cd8000 CPU: 29 COMMAND: "kworker/u98:10" #0 [ffffad8f8702f9e0] machine_kexec at ffffffff91c76ec7 #1 [ffffad8f8702fa38] __crash_kexec at ffffffff91dea4fa #2 [ffffad8f8702faf8] crash_kexec at ffffffff91deb788 #3 [ffffad8f8702fb00] oops_end at ffffffff91c2e4bb #4 [ffffad8f8702fb20] do_trap at ffffffff91c2a4ce #5 [ffffad8f8702fb70] do_error_trap at ffffffff91c2a595 #6 [ffffad8f8702fbb0] exc_divide_error at ffffffff928506e6 #7 [ffffad8f8702fbd0] asm_exc_divide_error at ffffffff92a00926 [exception RIP: blk_stack_limits+434] RIP: ffffffff92191872 RSP: ffffad8f8702fc80 RFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff95efa0c91800 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001 RBP: 00000000ffffffff R8: ffff95fec7df35a8 R9: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff95fed33c09a8 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ffffad8f8702fce0] nvme_update_ns_info_block at ffffffffc06d3533 [nvme_core] #9 [ffffad8f8702fd18] nvme_scan_ns at ffffffffc06d6fa7 [nvme_core] This happened when the check for valid data was moved out of nvme_identify_ns() into one of the callers. Fix this by checking in both callers. Link: https://bugzilla.kernel.org/show_bug.cgi?id=218186 Fixes: 0dd6fff ("nvme: bring back auto-removal of deleted namespaces during sequential scan") Cc: stable@vger.kernel.org Signed-off-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit e3e82fcb79eeb3f1a88a89f676831773caff514a ] When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be dereferenced as wrong struct in irdma_free_pending_cqp_request(). PID: 3669 TASK: ffff88aef892c000 CPU: 28 COMMAND: "kworker/28:0" #0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34 #1 [fffffe0000549e40] nmi_handle at ffffffff810788b2 #2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f #3 [fffffe0000549eb8] do_nmi at ffffffff81079582 #4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4 [exception RIP: native_queued_spin_lock_slowpath+1291] RIP: ffffffff8127e72b RSP: ffff88aa841ef778 RFLAGS: 00000046 RAX: 0000000000000000 RBX: ffff88b01f849700 RCX: ffffffff8127e47e RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff83857ec0 RBP: ffff88afe3e4efc8 R8: ffffed15fc7c9dfa R9: ffffed15fc7c9dfa R10: 0000000000000001 R11: ffffed15fc7c9df9 R12: 0000000000740000 R13: ffff88b01f849708 R14: 0000000000000003 R15: ffffed1603f092e1 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 -- <NMI exception stack> -- #5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b #6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4 #7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363 #8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma] #9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma] #10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma] #11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma] #12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb #13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6 #14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278 #15 [ffff88aa841efb88] device_del at ffffffff82179d23 #16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice] #17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice] #18 [ffff88aa841efde8] process_one_work at ffffffff811c589a #19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff #20 [ffff88aa841eff10] kthread at ffffffff811d87a0 #21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f Fixes: 44d9e52 ("RDMA/irdma: Implement device initialization definitions") Link: https://lore.kernel.org/r/20231130081415.891006-1-lishifeng@sangfor.com.cn Suggested-by: "Ismail, Mustafa" <mustafa.ismail@intel.com> Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

@smb

[ Upstream commit b35858b3786ddbb56e1c35138ba25d6adf8d0bef ] Validate @smb->WordCount to avoid reading off the end of @smb and thus causing the following KASAN splat: BUG: KASAN: slab-out-of-bounds in smbCalcSize+0x32/0x40 [cifs] Read of size 2 at addr ffff88801c024ec5 by task cifsd/1328 CPU: 1 PID: 1328 Comm: cifsd Not tainted 6.7.0-rc5 #9 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x4a/0x80 print_report+0xcf/0x650 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __phys_addr+0x46/0x90 kasan_report+0xd8/0x110 ? smbCalcSize+0x32/0x40 [cifs] ? smbCalcSize+0x32/0x40 [cifs] kasan_check_range+0x105/0x1b0 smbCalcSize+0x32/0x40 [cifs] checkSMB+0x162/0x370 [cifs] ? __pfx_checkSMB+0x10/0x10 [cifs] cifs_handle_standard+0xbc/0x2f0 [cifs] ? srso_alias_return_thunk+0x5/0xfbef5 cifs_demultiplex_thread+0xed1/0x1360 [cifs] ? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs] ? srso_alias_return_thunk+0x5/0xfbef5 ? lockdep_hardirqs_on_prepare+0x136/0x210 ? __pfx_lock_release+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? mark_held_locks+0x1a/0x90 ? lockdep_hardirqs_on_prepare+0x136/0x210 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __kthread_parkme+0xce/0xf0 ? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs] kthread+0x18d/0x1d0 ? kthread+0xdb/0x1d0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x60 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> This fixes CVE-2023-6606. Reported-by: j51569436@gmail.com Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218218 Cc: stable@vger.kernel.org Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit fc3a5534e2a8855427403113cbeb54af5837bbe0 ] An issue occurred while reading an ELF file in libbpf.c during fuzzing: Program received signal SIGSEGV, Segmentation fault. 0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206 4206 in libbpf.c (gdb) bt #0 0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206 #1 0x000000000094f9d6 in bpf_object.collect_relos () at libbpf.c:6706 #2 0x000000000092bef3 in bpf_object_open () at libbpf.c:7437 #3 0x000000000092c046 in bpf_object.open_mem () at libbpf.c:7497 #4 0x0000000000924afa in LLVMFuzzerTestOneInput () at fuzz/bpf-object-fuzzer.c:16 #5 0x000000000060be11 in testblitz_engine::fuzzer::Fuzzer::run_one () #6 0x000000000087ad92 in tracing::span::Span::in_scope () #7 0x00000000006078aa in testblitz_engine::fuzzer::util::walkdir () #8 0x00000000005f3217 in testblitz_engine::entrypoint::main::{{closure}} () #9 0x00000000005f2601 in main () (gdb) scn_data was null at this code(tools/lib/bpf/src/libbpf.c): if (rel->r_offset % BPF_INSN_SZ || rel->r_offset >= scn_data->d_size) { The scn_data is derived from the code above: scn = elf_sec_by_idx(obj, sec_idx); scn_data = elf_sec_data(obj, scn); relo_sec_name = elf_sec_str(obj, shdr->sh_name); sec_name = elf_sec_name(obj, scn); if (!relo_sec_name || !sec_name)// don't check whether scn_data is NULL return -EINVAL; In certain special scenarios, such as reading a malformed ELF file, it is possible that scn_data may be a null pointer Signed-off-by: Mingyi Zhang <zhangmingyi5@huawei.com> Signed-off-by: Xin Liu <liuxin350@huawei.com> Signed-off-by: Changye Wu <wuchangye@huawei.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20231221033947.154564-1-liuxin350@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>

…lblished(). [ Upstream commit 66b60b0c8c4a163b022a9f0ad6769b0fd3dc662f ] syzkaller reported a warning [0] in inet_csk_destroy_sock() with no repro. WARN_ON(inet_sk(sk)->inet_num && !inet_csk(sk)->icsk_bind_hash); However, the syzkaller's log hinted that connect() failed just before the warning due to FAULT_INJECTION. [1] When connect() is called for an unbound socket, we search for an available ephemeral port. If a bhash bucket exists for the port, we call __inet_check_established() or __inet6_check_established() to check if the bucket is reusable. If reusable, we add the socket into ehash and set inet_sk(sk)->inet_num. Later, we look up the corresponding bhash2 bucket and try to allocate it if it does not exist. Although it rarely occurs in real use, if the allocation fails, we must revert the changes by check_established(). Otherwise, an unconnected socket could illegally occupy an ehash entry. Note that we do not put tw back into ehash because sk might have already responded to a packet for tw and it would be better to free tw earlier under such memory presure. [0]: WARNING: CPU: 0 PID: 350830 at net/ipv4/inet_connection_sock.c:1193 inet_csk_destroy_sock (net/ipv4/inet_connection_sock.c:1193) Modules linked in: Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:inet_csk_destroy_sock (net/ipv4/inet_connection_sock.c:1193) Code: 41 5c 41 5d 41 5e e9 2d 4a 3d fd e8 28 4a 3d fd 48 89 ef e8 f0 cd 7d ff 5b 5d 41 5c 41 5d 41 5e e9 13 4a 3d fd e8 0e 4a 3d fd <0f> 0b e9 61 fe ff ff e8 02 4a 3d fd 4c 89 e7 be 03 00 00 00 e8 05 RSP: 0018:ffffc9000b21fd38 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000009e78 RCX: ffffffff840bae40 RDX: ffff88806e46c600 RSI: ffffffff840bb012 RDI: ffff88811755cca8 RBP: ffff88811755c880 R08: 0000000000000003 R09: 0000000000000000 R10: 0000000000009e78 R11: 0000000000000000 R12: ffff88811755c8e0 R13: ffff88811755c892 R14: ffff88811755c918 R15: 0000000000000000 FS: 00007f03e5243800(0000) GS:ffff88811ae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32f21000 CR3: 0000000112ffe001 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> ? inet_csk_destroy_sock (net/ipv4/inet_connection_sock.c:1193) dccp_close (net/dccp/proto.c:1078) inet_release (net/ipv4/af_inet.c:434) __sock_release (net/socket.c:660) sock_close (net/socket.c:1423) __fput (fs/file_table.c:377) __fput_sync (fs/file_table.c:462) __x64_sys_close (fs/open.c:1557 fs/open.c:1539 fs/open.c:1539) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129) RIP: 0033:0x7f03e53852bb Code: 03 00 00 00 0f 05 48 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 43 c9 f5 ff 8b 7c 24 0c 41 89 c0 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 89 44 24 0c e8 a1 c9 f5 ff 8b 44 RSP: 002b:00000000005dfba0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003 RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007f03e53852bb RDX: 0000000000000002 RSI: 0000000000000002 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000000 R09: 000000000000167c R10: 0000000008a79680 R11: 0000000000000293 R12: 00007f03e4e43000 R13: 00007f03e4e43170 R14: 00007f03e4e43178 R15: 00007f03e4e43170 </TASK> [1]: FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 0 CPU: 0 PID: 350833 Comm: syz-executor.1 Not tainted 6.7.0-12272-g2121c43f88f5 #9 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:107 (discriminator 1)) should_fail_ex (lib/fault-inject.c:52 lib/fault-inject.c:153) should_failslab (mm/slub.c:3748) kmem_cache_alloc (mm/slub.c:3763 mm/slub.c:3842 mm/slub.c:3867) inet_bind2_bucket_create (net/ipv4/inet_hashtables.c:135) __inet_hash_connect (net/ipv4/inet_hashtables.c:1100) dccp_v4_connect (net/dccp/ipv4.c:116) __inet_stream_connect (net/ipv4/af_inet.c:676) inet_stream_connect (net/ipv4/af_inet.c:747) __sys_connect_file (net/socket.c:2048 (discriminator 2)) __sys_connect (net/socket.c:2065) __x64_sys_connect (net/socket.c:2072) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129) RIP: 0033:0x7f03e5284e5d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48 RSP: 002b:00007f03e4641cc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 00000000004bbf80 RCX: 00007f03e5284e5d RDX: 0000000000000010 RSI: 0000000020000000 RDI: 0000000000000003 RBP: 00000000004bbf80 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 R13: 000000000000000b R14: 00007f03e52e5530 R15: 0000000000000000 </TASK> Reported-by: syzkaller <syzkaller@googlegroups.com> Fixes: 28044fc ("net: Add a bhash2 table hashed by port and address") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit fc3a5534e2a8855427403113cbeb54af5837bbe0 ] An issue occurred while reading an ELF file in libbpf.c during fuzzing: Program received signal SIGSEGV, Segmentation fault. 0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206 4206 in libbpf.c (gdb) bt #0 0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206 #1 0x000000000094f9d6 in bpf_object.collect_relos () at libbpf.c:6706 #2 0x000000000092bef3 in bpf_object_open () at libbpf.c:7437 #3 0x000000000092c046 in bpf_object.open_mem () at libbpf.c:7497 #4 0x0000000000924afa in LLVMFuzzerTestOneInput () at fuzz/bpf-object-fuzzer.c:16 #5 0x000000000060be11 in testblitz_engine::fuzzer::Fuzzer::run_one () #6 0x000000000087ad92 in tracing::span::Span::in_scope () #7 0x00000000006078aa in testblitz_engine::fuzzer::util::walkdir () #8 0x00000000005f3217 in testblitz_engine::entrypoint::main::{{closure}} () #9 0x00000000005f2601 in main () (gdb) scn_data was null at this code(tools/lib/bpf/src/libbpf.c): if (rel->r_offset % BPF_INSN_SZ || rel->r_offset >= scn_data->d_size) { The scn_data is derived from the code above: scn = elf_sec_by_idx(obj, sec_idx); scn_data = elf_sec_data(obj, scn); relo_sec_name = elf_sec_str(obj, shdr->sh_name); sec_name = elf_sec_name(obj, scn); if (!relo_sec_name || !sec_name)// don't check whether scn_data is NULL return -EINVAL; In certain special scenarios, such as reading a malformed ELF file, it is possible that scn_data may be a null pointer Signed-off-by: Mingyi Zhang <zhangmingyi5@huawei.com> Signed-off-by: Xin Liu <liuxin350@huawei.com> Signed-off-by: Changye Wu <wuchangye@huawei.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20231221033947.154564-1-liuxin350@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>

…lblished(). [ Upstream commit 66b60b0c8c4a163b022a9f0ad6769b0fd3dc662f ] syzkaller reported a warning [0] in inet_csk_destroy_sock() with no repro. WARN_ON(inet_sk(sk)->inet_num && !inet_csk(sk)->icsk_bind_hash); However, the syzkaller's log hinted that connect() failed just before the warning due to FAULT_INJECTION. [1] When connect() is called for an unbound socket, we search for an available ephemeral port. If a bhash bucket exists for the port, we call __inet_check_established() or __inet6_check_established() to check if the bucket is reusable. If reusable, we add the socket into ehash and set inet_sk(sk)->inet_num. Later, we look up the corresponding bhash2 bucket and try to allocate it if it does not exist. Although it rarely occurs in real use, if the allocation fails, we must revert the changes by check_established(). Otherwise, an unconnected socket could illegally occupy an ehash entry. Note that we do not put tw back into ehash because sk might have already responded to a packet for tw and it would be better to free tw earlier under such memory presure. [0]: WARNING: CPU: 0 PID: 350830 at net/ipv4/inet_connection_sock.c:1193 inet_csk_destroy_sock (net/ipv4/inet_connection_sock.c:1193) Modules linked in: Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:inet_csk_destroy_sock (net/ipv4/inet_connection_sock.c:1193) Code: 41 5c 41 5d 41 5e e9 2d 4a 3d fd e8 28 4a 3d fd 48 89 ef e8 f0 cd 7d ff 5b 5d 41 5c 41 5d 41 5e e9 13 4a 3d fd e8 0e 4a 3d fd <0f> 0b e9 61 fe ff ff e8 02 4a 3d fd 4c 89 e7 be 03 00 00 00 e8 05 RSP: 0018:ffffc9000b21fd38 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000009e78 RCX: ffffffff840bae40 RDX: ffff88806e46c600 RSI: ffffffff840bb012 RDI: ffff88811755cca8 RBP: ffff88811755c880 R08: 0000000000000003 R09: 0000000000000000 R10: 0000000000009e78 R11: 0000000000000000 R12: ffff88811755c8e0 R13: ffff88811755c892 R14: ffff88811755c918 R15: 0000000000000000 FS: 00007f03e5243800(0000) GS:ffff88811ae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32f21000 CR3: 0000000112ffe001 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> ? inet_csk_destroy_sock (net/ipv4/inet_connection_sock.c:1193) dccp_close (net/dccp/proto.c:1078) inet_release (net/ipv4/af_inet.c:434) __sock_release (net/socket.c:660) sock_close (net/socket.c:1423) __fput (fs/file_table.c:377) __fput_sync (fs/file_table.c:462) __x64_sys_close (fs/open.c:1557 fs/open.c:1539 fs/open.c:1539) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129) RIP: 0033:0x7f03e53852bb Code: 03 00 00 00 0f 05 48 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 43 c9 f5 ff 8b 7c 24 0c 41 89 c0 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 89 44 24 0c e8 a1 c9 f5 ff 8b 44 RSP: 002b:00000000005dfba0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003 RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007f03e53852bb RDX: 0000000000000002 RSI: 0000000000000002 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000000 R09: 000000000000167c R10: 0000000008a79680 R11: 0000000000000293 R12: 00007f03e4e43000 R13: 00007f03e4e43170 R14: 00007f03e4e43178 R15: 00007f03e4e43170 </TASK> [1]: FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 0 CPU: 0 PID: 350833 Comm: syz-executor.1 Not tainted 6.7.0-12272-g2121c43f88f5 #9 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:107 (discriminator 1)) should_fail_ex (lib/fault-inject.c:52 lib/fault-inject.c:153) should_failslab (mm/slub.c:3748) kmem_cache_alloc (mm/slub.c:3763 mm/slub.c:3842 mm/slub.c:3867) inet_bind2_bucket_create (net/ipv4/inet_hashtables.c:135) __inet_hash_connect (net/ipv4/inet_hashtables.c:1100) dccp_v4_connect (net/dccp/ipv4.c:116) __inet_stream_connect (net/ipv4/af_inet.c:676) inet_stream_connect (net/ipv4/af_inet.c:747) __sys_connect_file (net/socket.c:2048 (discriminator 2)) __sys_connect (net/socket.c:2065) __x64_sys_connect (net/socket.c:2072) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129) RIP: 0033:0x7f03e5284e5d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48 RSP: 002b:00007f03e4641cc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 00000000004bbf80 RCX: 00007f03e5284e5d RDX: 0000000000000010 RSI: 0000000020000000 RDI: 0000000000000003 RBP: 00000000004bbf80 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 R13: 000000000000000b R14: 00007f03e52e5530 R15: 0000000000000000 </TASK> Reported-by: syzkaller <syzkaller@googlegroups.com> Fixes: 28044fc ("net: Add a bhash2 table hashed by port and address") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 34b567868777e9fd39ec5333969728a7f0cf179c ] (1 << idx) of int is not desired when setting bits in unsigned long overflowed_ctrs, use BIT() instead. This panic happens when running 'perf record -e branches' on sophgo sg2042. [ 273.311852] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098 [ 273.320851] Oops [#1] [ 273.323179] Modules linked in: [ 273.326303] CPU: 0 PID: 1475 Comm: perf Not tainted 6.6.0-rc3+ #9 [ 273.332521] Hardware name: Sophgo Mango (DT) [ 273.336878] epc : riscv_pmu_ctr_get_width_mask+0x8/0x62 [ 273.342291] ra : pmu_sbi_ovf_handler+0x2e0/0x34e [ 273.347091] epc : ffffffff80aecd98 ra : ffffffff80aee056 sp : fffffff6e36928b0 [ 273.354454] gp : ffffffff821f82d0 tp : ffffffd90c353200 t0 : 0000002ade4f9978 [ 273.361815] t1 : 0000000000504d55 t2 : ffffffff8016cd8c s0 : fffffff6e3692a70 [ 273.369180] s1 : 0000000000000020 a0 : 0000000000000000 a1 : 00001a8e81800000 [ 273.376540] a2 : 0000003c00070198 a3 : 0000003c00db75a4 a4 : 0000000000000015 [ 273.383901] a5 : ffffffd7ff8804b0 a6 : 0000000000000015 a7 : 000000000000002a [ 273.391327] s2 : 000000000000ffff s3 : 0000000000000000 s4 : ffffffd7ff8803b0 [ 273.398773] s5 : 0000000000504d55 s6 : ffffffd905069800 s7 : ffffffff821fe210 [ 273.406139] s8 : 000000007fffffff s9 : ffffffd7ff8803b0 s10: ffffffd903f29098 [ 273.413660] s11: 0000000080000000 t3 : 0000000000000003 t4 : ffffffff8017a0ca [ 273.421022] t5 : ffffffff8023cfc2 t6 : ffffffd9040780e8 [ 273.426437] status: 0000000200000100 badaddr: 0000000000000098 cause: 000000000000000d [ 273.434512] [<ffffffff80aecd98>] riscv_pmu_ctr_get_width_mask+0x8/0x62 [ 273.441169] [<ffffffff80076bd8>] handle_percpu_devid_irq+0x98/0x1ee [ 273.447562] [<ffffffff80071158>] generic_handle_domain_irq+0x28/0x36 [ 273.454151] [<ffffffff8047a99a>] riscv_intc_irq+0x36/0x4e [ 273.459659] [<ffffffff80c944de>] handle_riscv_irq+0x4a/0x74 [ 273.465442] [<ffffffff80c94c48>] do_irq+0x62/0x92 [ 273.470360] Code: 0420 60a2 6402 5529 0141 8082 0013 0000 0013 0000 (6d5c) b783 [ 273.477921] ---[ end trace 0000000000000000 ]--- [ 273.482630] Kernel panic - not syncing: Fatal exception in interrupt Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Fei Wu <fei2.wu@intel.com> Link: https://lore.kernel.org/r/20240228115425.2613856-1-fei2.wu@intel.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 4be9075fec0a639384ed19975634b662bfab938f upstream. The driver creates /sys/kernel/debug/dri/0/mob_ttm even when the corresponding ttm_resource_manager is not allocated. This leads to a crash when trying to read from this file. Add a check to create mob_ttm, system_mob_ttm, and gmr_ttm debug file only when the corresponding ttm_resource_manager is allocated. crash> bt PID: 3133409 TASK: ffff8fe4834a5000 CPU: 3 COMMAND: "grep" #0 [ffffb954506b3b20] machine_kexec at ffffffffb2a6bec3 #1 [ffffb954506b3b78] __crash_kexec at ffffffffb2bb598a #2 [ffffb954506b3c38] crash_kexec at ffffffffb2bb68c1 #3 [ffffb954506b3c50] oops_end at ffffffffb2a2a9b1 #4 [ffffb954506b3c70] no_context at ffffffffb2a7e913 #5 [ffffb954506b3cc8] __bad_area_nosemaphore at ffffffffb2a7ec8c #6 [ffffb954506b3d10] do_page_fault at ffffffffb2a7f887 #7 [ffffb954506b3d40] page_fault at ffffffffb360116e [exception RIP: ttm_resource_manager_debug+0x11] RIP: ffffffffc04afd11 RSP: ffffb954506b3df0 RFLAGS: 00010246 RAX: ffff8fe41a6d1200 RBX: 0000000000000000 RCX: 0000000000000940 RDX: 0000000000000000 RSI: ffffffffc04b4338 RDI: 0000000000000000 RBP: ffffb954506b3e08 R8: ffff8fee3ffad000 R9: 0000000000000000 R10: ffff8fe41a76a000 R11: 0000000000000001 R12: 00000000ffffffff R13: 0000000000000001 R14: ffff8fe5bb6f3900 R15: ffff8fe41a6d1200 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ffffb954506b3e00] ttm_resource_manager_show at ffffffffc04afde7 [ttm] #9 [ffffb954506b3e30] seq_read at ffffffffb2d8f9f3 RIP: 00007f4c4eda8985 RSP: 00007ffdbba9e9f8 RFLAGS: 00000246 RAX: ffffffffffffffda RBX: 000000000037e000 RCX: 00007f4c4eda8985 RDX: 000000000037e000 RSI: 00007f4c41573000 RDI: 0000000000000003 RBP: 000000000037e000 R8: 0000000000000000 R9: 000000000037fe30 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f4c41573000 R13: 0000000000000003 R14: 00007f4c41572010 R15: 0000000000000003 ORIG_RAX: 0000000000000000 CS: 0033 SS: 002b Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Fixes: af4a25b ("drm/vmwgfx: Add debugfs entries for various ttm resource managers") Cc: <stable@vger.kernel.org> Reviewed-by: Zack Rusin <zack.rusin@broadcom.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240312093551.196609-1-jfalempe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit f8bbc07ac535593139c875ffa19af924b1084540 ] vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e #3 [fffffe00003fced0] do_nmi at ffffffff8922660d #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #5 [ffffa655314979e8] io_serial_in at ffffffff89792594 #6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 #7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 #8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 #9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 #10 [ffffa65531497ac8] console_unlock at ffffffff89316124 #11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 #12 [ffffa65531497b68] printk at ffffffff89318306 #13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 #14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] #15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] #16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] #17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] #18 [ffffa65531497f10] kthread at ffffffff892d2e72 #19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <lei.chen@smartx.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240415020247.2207781-1-lei.chen@smartx.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit fc3a5534e2a8855427403113cbeb54af5837bbe0 ] An issue occurred while reading an ELF file in libbpf.c during fuzzing: Program received signal SIGSEGV, Segmentation fault. 0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206 4206 in libbpf.c (gdb) bt #0 0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206 #1 0x000000000094f9d6 in bpf_object.collect_relos () at libbpf.c:6706 #2 0x000000000092bef3 in bpf_object_open () at libbpf.c:7437 #3 0x000000000092c046 in bpf_object.open_mem () at libbpf.c:7497 #4 0x0000000000924afa in LLVMFuzzerTestOneInput () at fuzz/bpf-object-fuzzer.c:16 #5 0x000000000060be11 in testblitz_engine::fuzzer::Fuzzer::run_one () #6 0x000000000087ad92 in tracing::span::Span::in_scope () #7 0x00000000006078aa in testblitz_engine::fuzzer::util::walkdir () #8 0x00000000005f3217 in testblitz_engine::entrypoint::main::{{closure}} () #9 0x00000000005f2601 in main () (gdb) scn_data was null at this code(tools/lib/bpf/src/libbpf.c): if (rel->r_offset % BPF_INSN_SZ || rel->r_offset >= scn_data->d_size) { The scn_data is derived from the code above: scn = elf_sec_by_idx(obj, sec_idx); scn_data = elf_sec_data(obj, scn); relo_sec_name = elf_sec_str(obj, shdr->sh_name); sec_name = elf_sec_name(obj, scn); if (!relo_sec_name || !sec_name)// don't check whether scn_data is NULL return -EINVAL; In certain special scenarios, such as reading a malformed ELF file, it is possible that scn_data may be a null pointer Signed-off-by: Mingyi Zhang <zhangmingyi5@huawei.com> Signed-off-by: Xin Liu <liuxin350@huawei.com> Signed-off-by: Changye Wu <wuchangye@huawei.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20231221033947.154564-1-liuxin350@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 769e6a1e15bdbbaf2b0d2f37c24f2c53268bd21f ] ui_browser__show() is capturing the input title that is stack allocated memory in hist_browser__run(). Avoid a use after return by strdup-ing the string. Committer notes: Further explanation from Ian Rogers: My command line using tui is: $ sudo bash -c 'rm /tmp/asan.log*; export ASAN_OPTIONS="log_path=/tmp/asan.log"; /tmp/perf/perf mem record -a sleep 1; /tmp/perf/perf mem report' I then go to the perf annotate view and quit. This triggers the asan error (from the log file): ``` ==1254591==ERROR: AddressSanitizer: stack-use-after-return on address 0x7f2813331920 at pc 0x7f28180 65991 bp 0x7fff0a21c750 sp 0x7fff0a21bf10 READ of size 80 at 0x7f2813331920 thread T0 #0 0x7f2818065990 in __interceptor_strlen ../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:461 #1 0x7f2817698251 in SLsmg_write_wrapped_string (/lib/x86_64-linux-gnu/libslang.so.2+0x98251) #2 0x7f28176984b9 in SLsmg_write_nstring (/lib/x86_64-linux-gnu/libslang.so.2+0x984b9) #3 0x55c94045b365 in ui_browser__write_nstring ui/browser.c:60 #4 0x55c94045c558 in __ui_browser__show_title ui/browser.c:266 #5 0x55c94045c776 in ui_browser__show ui/browser.c:288 #6 0x55c94045c06d in ui_browser__handle_resize ui/browser.c:206 #7 0x55c94047979b in do_annotate ui/browsers/hists.c:2458 #8 0x55c94047fb17 in evsel__hists_browse ui/browsers/hists.c:3412 #9 0x55c940480a0c in perf_evsel_menu__run ui/browsers/hists.c:3527 #10 0x55c940481108 in __evlist__tui_browse_hists ui/browsers/hists.c:3613 #11 0x55c9404813f7 in evlist__tui_browse_hists ui/browsers/hists.c:3661 #12 0x55c93ffa253f in report__browse_hists tools/perf/builtin-report.c:671 #13 0x55c93ffa58ca in __cmd_report tools/perf/builtin-report.c:1141 #14 0x55c93ffaf159 in cmd_report tools/perf/builtin-report.c:1805 #15 0x55c94000c05c in report_events tools/perf/builtin-mem.c:374 #16 0x55c94000d96d in cmd_mem tools/perf/builtin-mem.c:516 #17 0x55c9400e44ee in run_builtin tools/perf/perf.c:350 #18 0x55c9400e4a5a in handle_internal_command tools/perf/perf.c:403 #19 0x55c9400e4e22 in run_argv tools/perf/perf.c:447 #20 0x55c9400e53ad in main tools/perf/perf.c:561 #21 0x7f28170456c9 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 #22 0x7f2817045784 in __libc_start_main_impl ../csu/libc-start.c:360 #23 0x55c93ff544c0 in _start (/tmp/perf/perf+0x19a4c0) (BuildId: 84899b0e8c7d3a3eaa67b2eb35e3d8b2f8cd4c93) Address 0x7f2813331920 is located in stack of thread T0 at offset 32 in frame #0 0x55c94046e85e in hist_browser__run ui/browsers/hists.c:746 This frame has 1 object(s): [32, 192) 'title' (line 747) <== Memory access at offset 32 is inside this variable HINT: this may be a false positive if your program uses some custom stack unwind mechanism, swapcontext or vfork ``` hist_browser__run isn't on the stack so the asan error looks legit. There's no clean init/exit on struct ui_browser so I may be trading a use-after-return for a memory leak, but that seems look a good trade anyway. Fixes: 05e8b08 ("perf ui browser: Stop using 'self'") Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Ben Gainey <ben.gainey@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: K Prateek Nayak <kprateek.nayak@amd.com> Cc: Li Dong <lidong@vivo.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Paran Lee <p4ranlee@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Sun Haiyong <sunhaiyong@loongson.cn> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Yanteng Si <siyanteng@loongson.cn> Cc: Yicong Yang <yangyicong@hisilicon.com> Link: https://lore.kernel.org/r/20240507183545.1236093-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 9d274c19a71b3a276949933859610721a453946b upstream. We have been seeing crashes on duplicate keys in btrfs_set_item_key_safe(): BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:2620! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs] With the following stack trace: #0 btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4) #1 btrfs_drop_extents (fs/btrfs/file.c:411:4) #2 log_one_extent (fs/btrfs/tree-log.c:4732:9) #3 btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9) #4 btrfs_log_inode (fs/btrfs/tree-log.c:6626:9) #5 btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8) #6 btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8) #7 btrfs_sync_file (fs/btrfs/file.c:1933:8) #8 vfs_fsync_range (fs/sync.c:188:9) #9 vfs_fsync (fs/sync.c:202:9) #10 do_fsync (fs/sync.c:212:9) #11 __do_sys_fdatasync (fs/sync.c:225:9) #12 __se_sys_fdatasync (fs/sync.c:223:1) #13 __x64_sys_fdatasync (fs/sync.c:223:1) #14 do_syscall_x64 (arch/x86/entry/common.c:52:14) #15 do_syscall_64 (arch/x86/entry/common.c:83:7) #16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121) So we're logging a changed extent from fsync, which is splitting an extent in the log tree. But this split part already exists in the tree, triggering the BUG(). This is the state of the log tree at the time of the crash, dumped with drgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py) to get more details than btrfs_print_leaf() gives us: >>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"]) leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610 leaf 33439744 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160 generation 7 transid 9 size 8192 nbytes 8473563889606862198 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 204 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417704.983333333 (2024-05-22 15:41:44) mtime 1716417704.983333333 (2024-05-22 15:41:44) otime 17592186044416.000000000 (559444-03-08 01:40:16) item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13 index 195 namelen 3 name: 193 item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 4096 ram 12288 extent compression 0 (none) item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 4096 nr 8192 item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 ... So the real problem happened earlier: notice that items 4 (4k-12k) and 5 (8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size and item 5 starts at i_size. Here is the state of the filesystem tree at the time of the crash: >>> root = prog.crashed_thread().stack_trace()[2]["inode"].root >>> ret, nodes, slots = btrfs_search_slot(root, BtrfsKey(450, 0, 0)) >>> print_extent_buffer(nodes[0]) leaf 30425088 level 0 items 184 generation 9 owner 5 leaf 30425088 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da ... item 179 key (450 INODE_ITEM 0) itemoff 4907 itemsize 160 generation 7 transid 7 size 4096 nbytes 12288 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 6 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417703.220000000 (2024-05-22 15:41:43) mtime 1716417703.220000000 (2024-05-22 15:41:43) otime 1716417703.220000000 (2024-05-22 15:41:43) item 180 key (450 INODE_REF 256) itemoff 4894 itemsize 13 index 195 namelen 3 name: 193 item 181 key (450 XATTR_ITEM 1640047104) itemoff 4857 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 182 key (450 EXTENT_DATA 0) itemoff 4804 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 8192 ram 12288 extent compression 0 (none) item 183 key (450 EXTENT_DATA 8192) itemoff 4751 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 Item 5 in the log tree corresponds to item 183 in the filesystem tree, but nothing matches item 4. Furthermore, item 183 is the last item in the leaf. btrfs_log_prealloc_extents() is responsible for logging prealloc extents beyond i_size. It first truncates any previously logged prealloc extents that start beyond i_size. Then, it walks the filesystem tree and copies the prealloc extent items to the log tree. If it hits the end of a leaf, then it calls btrfs_next_leaf(), which unlocks the tree and does another search. However, while the filesystem tree is unlocked, an ordered extent completion may modify the tree. In particular, it may insert an extent item that overlaps with an extent item that was already copied to the log tree. This may manifest in several ways depending on the exact scenario, including an EEXIST error that is silently translated to a full sync, overlapping items in the log tree, or this crash. This particular crash is triggered by the following sequence of events: - Initially, the file has i_size=4k, a regular extent from 0-4k, and a prealloc extent beyond i_size from 4k-12k. The prealloc extent item is the last item in its B-tree leaf. - The file is fsync'd, which copies its inode item and both extent items to the log tree. - An xattr is set on the file, which sets the BTRFS_INODE_COPY_EVERYTHING flag. - The range 4k-8k in the file is written using direct I/O. i_size is extended to 8k, but the ordered extent is still in flight. - The file is fsync'd. Since BTRFS_INODE_COPY_EVERYTHING is set, this calls copy_inode_items_to_log(), which calls btrfs_log_prealloc_extents(). - btrfs_log_prealloc_extents() finds the 4k-12k prealloc extent in the filesystem tree. Since it starts before i_size, it skips it. Since it is the last item in its B-tree leaf, it calls btrfs_next_leaf(). - btrfs_next_leaf() unlocks the path. - The ordered extent completion runs, which converts the 4k-8k part of the prealloc extent to written and inserts the remaining prealloc part from 8k-12k. - btrfs_next_leaf() does a search and finds the new prealloc extent 8k-12k. - btrfs_log_prealloc_extents() copies the 8k-12k prealloc extent into the log tree. Note that it overlaps with the 4k-12k prealloc extent that was copied to the log tree by the first fsync. - fsync calls btrfs_log_changed_extents(), which tries to log the 4k-8k extent that was written. - This tries to drop the range 4k-8k in the log tree, which requires adjusting the start of the 4k-12k prealloc extent in the log tree to 8k. - btrfs_set_item_key_safe() sees that there is already an extent starting at 8k in the log tree and calls BUG(). Fix this by detecting when we're about to insert an overlapping file extent item in the log tree and truncating the part that would overlap. CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Dave Chinner and others added 30 commits December 1, 2019 09:16

selftests/bpf: fix file resource leak in load_kallsyms

a0ec7f6

[ Upstream commit 1bd70d2 ] FILE pointer variable f is opened but never closed. Signed-off-by: Peng Hao <peng.hao2@zte.com.cn> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: Fix a compile warning for cmpxchg64()

7983dea

[ Upstream commit e732f44 ] Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/64s/radix: Fix radix__flush_tlb_collapsed_pmd double flushing…

3173e22

… pmd [ Upstream commit dd76ff5 ] Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>

ceph: fix dentry leak in ceph_readdir_prepopulate

146fb4b

[ Upstream commit c58f450 ] Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Kernel 4 19 87 cve #9

Kernel 4 19 87 cve #9

swaroopbalan commented Dec 13, 2019

Kernel 4 19 87 cve #9

Are you sure you want to change the base?

Kernel 4 19 87 cve #9

Conversation

swaroopbalan commented Dec 13, 2019