STM32duino driver for nRF24L01 2.4GHz Wireless Transceiver
This is a modified version of the maniacbug RF24 library that can be found here https://github.com/maniacbug/RF24 . It has been modified to work with the stm32f103 on the Arduino platform. The project for this can be found here. https://github.com/rogerclarkmelbourne/Arduino_STM32
Design Goals: This library is designed to be...
- Maximally compliant with the intended operation of the chip
- Easy for beginners to use
- Consumed with a public interface that's similiar to other Arduino standard libraries
- Built against the standard SPI library.
Please refer to:
This chip uses the SPI bus, plus two chip control pins. Remember that pin 10 must still remain an output, or the SPI hardware will go into 'slave' mode.