This project uses the GPIO pins of a Raspberry PI to control a rgb led stripe. It provides a C# webservice in mono and a small webapp as frontend. An example of what can be done using this is shown here: http://youtu.be/H8I5YCeRhQg
This project is based on the excellent work of Tomas Sarlandie pi-blaster: https://github.com/sarfata/pi-blaster and the modifications/updates made by Michael Vitousek: https://github.com/mvitousek/pi-blaster
Pi-blaster project is based on the excellent work of Richard Hirst for ServoBlaster: https://github.com/richardghirst/PiBits
This project is also based on a C# example contributed by Vili Volcini. It is available on this stackoverflow thread.
3x IRLZ 34N MOSFET N-Ch TO-220AB 55V 27A (a bit overkill)
3x metal layer resistor 10,0 K-Ohm (for pulldown)
1x stripboard 1x SET LED 5050 SMD RGB Stripe 12V incl. power supply
Some wires to connect everything
Fritzing layout: http://goo.gl/f5va8T