Skip to content

Code related to the Motorola 68000 microprocessor.

Notifications You must be signed in to change notification settings

jefftranter/68000

Repository files navigation

68000 single-board retro-computing project

Designs and code related to the Motorola 68000 microprocessor.

Building the project hardware

  1. Order the board
  2. Order the parts from the bill of materials (BOM)
  3. Order the two FT232 USB -> serial breakout boards
  4. Order the chip sockets:
Layout Qty Width (inches) Notes
DIP-8 1 0.3 For the 555
DIP-14 17 0.3 For a lot
DIP-16 8 0.3 For even more
DIP-24 2 0.6 Double width: for serial interface
DIP-28 8 0.6 Double width: for RAM & ROM
DIP-64 1 0.9 Triple width: for CPU.

The DIP-64 can be a little hard to obtain, you could cut DIP-40 sockets to same effect. However, it's inadvisable to directly solder the CPU directly to the board. If the heat damages the chip, there's 64 pins to de-solder.

  1. Solder in the sockets. Applying some soldering flux can be of great help: the IC soldering pads are tiny, mainly to save space on the board.
  2. Solder in the rest of the components
  3. Flash the ROM chips
  4. Fit all ICs into their sockets
  5. Connect power (preferably through a lab bench power supply)
  6. Connect a PC to the board through USB
  7. Watch it boot
  8. Have some retro-computing fun!

Copyright (c) 2016-2023 by Jeff Tranter tranter@pobox.com

The hardware design is Open Source Hardware, licensed under the The TAPR Open Hardware License. You are welcome to build the circuit and use my PCB layout. See https://web.tapr.org/OHL/TAPR_Open_Hardware_License_v1.0.txt

Some code here is entirely written by me and others are ports of existing software. Software written by me is released under the following license:

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Documentation written by me is licensed under a Creative Commons Attribution 4.0 International License. See https://creativecommons.org/licenses/by/4.0/

About

Code related to the Motorola 68000 microprocessor.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published