Could not install dblatex-0.3.10nb1 (Darwin) #87
Comments
|
Based on a number of crucial package upgrades involved (e.g. pkg_install), it looks like you have not updated your pkgsrc install for a long time. Based on the output, it's actually not failing on the TeXLive/TLUtils.pm error (that's likely just a post-install script shared among the tex packages), but on the pkg-config vs. pkgconf conflict, which means your bootstrap is close to two years old (or more), because pkgsrc switched to pkgconf in April 2016. It might be best for the sanity of your setup to re-bootstrap completely using our guide, rather than fiddle with However, since that is something that will always work as a last ditch attempt, you might try |
|
Glorious, this worked: Thanks, @mamash |
jperkin
pushed a commit
that referenced
this issue
Mar 31, 2018
* Fix out-of-tree builds with CMake. Issue #86 * Fix issue found with Clang regarding invalid suffix on a literal Issue #110 * Check now responds to a few errors in a more clear way when it cannot run tests. PR #122, #123 * Fix missing pid_t definition in check.h on Windows Issue #78 * The maximum message size of check assertions is now configurable. Issue #127 * Check support added for Visual Studios 2010, 2012, 2013, 2015, and 2017 both for x86/64 and ARM. PR #129, Issue #125 * Changed license of example CMake files to BSD (was previously LGPL). Issue #131 * Fix issue with floating point macros on MinGW Issue #101 * Avoid issue in unit test output checking where a shell's built-in printf command does not work properly, but the printf program itself is correct. * Emit only valid XML characters in XML logging (assumes ASCII encoding). Bug #103 * Add LGPL header to files where it was missing; update FSF address in LGPL headers Bug #110 * Strip timestamps from examples using filterdiff if available. This allow build output to be reproducible. Bug #112 * Use double slash for regular expressions in checkmk for better Solaris support. * Improve CMake build files for better Visual Studio 2015 support. Pull Request #19 * Fix potential SIGSEGV in Check related to the disk filling up during a test. Pull Request #21 * Support added for applying tags to test cases and selectively running test cases based on tags. Pull Request #44 * Macros for comparing memory regions (ck_assert_mem_eq, ck_assert_mem_ne) have been added. Pull Request #64 * Macros for comparing floating point numbers have been added. Pull Request #69 * Macros for comparing string, but allowing for NULL (ck_assert_pstr_eq, ck_assert_pstr_ne) have been added. Pull Request #80 * Macros for checking if a pointer is NULL or not have been added. Pull Request #87
jperkin
pushed a commit
that referenced
this issue
May 15, 2018
v2.5.4 2018-05-05T03:43:55Z
- Follow Devel::PPPort 3.42 (#87)
v2.5.3 2018-05-05T03:35:45Z
- Sorry, I made a mistake. Do not use this version.
jperkin
pushed a commit
that referenced
this issue
Dec 1, 2018
pkgsrc changes: - Switch to www/webkit-gtk (instead of using webkit24-gtk3) - Adjust GITHUB_RELEASE to remove the trailing `a', please note that this will probably not needed for future releases! Changes: 1.12.5 ------ * #665: Webkit browser now supplies 'Liferea' component in user agent * #664: Added "Mark All As Read" button to headerbar plugin * #620: Added flatpak JSON (glitsj16) * #579: Added item list column drag and drop reordering (Yanko Kaneti) * #436, #662: Move from GnomeKeyring to libsecret (bgermann) * Fixes #663: Correct instapaper sharing link (Daniel Alexandersen) * Fixes #661: Update sharing links (Daniel Alexandersen) * Fixes #271: Consistent over usage of CPU (trigger by "Next Unread" loop) (reported by GreenLunar) * #472, #632: Dropping Inoreader support (API broke) 1.12.4 ------ * Fixes #660: Added installable plugin to change accels (Lars Windolf) * Fixes #654: Segfault on date out of range (Leaiz) * Fixes #651: Fixes Free Music Archive link in default OPMLs (reported by benjbrandall) * Fixes #649: Switch from persistent to session-only cookies (Daniel Alexandersen) * Fixes #645, #646: unread count of vfolder (Leaiz) * Fixes #637: Extra keywords in .desktop file (syndication; rss; atom) (Daniel Alexandersen) * Fixes #557: Updating counters for remote sources (Leiaz) * Updated cookie usage hint in FAQ 1.12.3 ------ * #634: Added setting for custom download commands (Leiaz) * #614: GTK Headerbar support via plugin (Lars Windolf) * #608: Refactoring UI code to switch to GAction and GtkBuilder Note: this implies not having icons in the main menu anymore which were still there for all non-GNOME users (see #626). (Leiaz) * #589: Item list view column order rework as a preparation for possible real column drag&drop. Introduces a new DConf setting for the column order. (Yanko Kaneti) * Fixes #280: Mark read toolbar button always disabled for search folders (Lars Windolf, reported by dvahalev) * Fixes #591: Please add a safety question when "marking all read" (Leiaz, reported by Nudin) * Fixes #625: Avoid exception in trayicon.py (Lars Windolf) * Fixes #627: GnomeKeyring plugin fails to activate when keyring doesn't exist (Lars Windolf) * Fixes #630: Fix feed list selection after DnD (Peter Zaitev) * Fixes #633: Big Memory leak in date code (Leiaz) * Update of Turkish translation (emintufan) * Update of French translation (guilieb) 1.12.2 ------ * Adding a plugin installer plugin that allows discovering and automatically installing 3rd party plugins * #585: Drop language from user agent to increase privacy (Daniel Aleksandersen) * #583: Add transmission-gtk and aria2 as download tool options (Daniel Aleksandersen) * #495: New command line option --disable-plugins (-p) to start with all plugins disabled. * Fixes #610: Liferea not showing up in GNOME Software (Yanko Kaneti) * Fixes #604: Correctly print error message when failing to unlock GNOME keyring (ghost) * Fixes #602: CSS style for GTK link colors not used (reported by pupyc) * Fixes #581: Redirect location updates and adds HTTP 308 (RFC 7538) support (Daniel Aleksandersen) * Fixes #578: Unable to set unread items in bold (Leiaz, reported by EverEve) * #612: Update of French translation (Guillaume Bernard) * #596: Update of Swedish translation (jony0008) * #594: Update of Polish default feed list (wmyrda) * #584: Fixes broken OPML feed list entries (Daniel Aleksandersen) * #584: Added Norwegian feed list (Daniel Aleksandersen) * #577: Fixes newsbin doc typo (Daniel Aleksandersen) 1.12.1 ------ * Fixes #562: Lintian spelling errors (reported by Paul Gevers) * Fixes #563: Appstream data has new format (patch by Paul Gevers) * Fixes #572: Doesn't remember some sort orders (reported by geplus) * Fixes #504: Fix assertions/crashes on changing view layouts (Leiaz) * Fixes #573: Workaround to avoid GtkPaned shrinking (Leiaz) * #566: Update of Italian translation (Gianvito Cavasoli) * #566: Update of Italian default feed list (Gianvito Cavasoli) * #514: Update of Indonesian translation (Samsul Ma'arif) * #514: Added Indonesian default feed list (Samsul Ma'arif) * Update of German translation 1.12.0 ------ * Fixes unhiding from tray icon when activated via GApplication (when starting Liferea a 2nd time) * #399: Reorder columns in 'Normal' email-like view to have the date column always at the end (Mikel Olasagasti) * #532: Add plugin to make unread feeds titles bold (Yanko Kaneti) * Workaround for #503: Liferea deanonymize Tor (Leiaz) * Fixes #450: #546 Resize both panes in normal and wide view (Leiaz) * Fixes #538: toggle_visibility() does not make a minimized window visible again (reported by Balló György) * Fixes #522: Segfault when switching feed in combined view (patch by jonmstone) * Fixes #419, #457: Handling of relative URLs in Atom parser (Leiaz) * Added 'View Image' context menu option in HTML view * Dropped del.icio.us from social bookmarking options as it is a read-only service now. * Redesign of the wide view mode: larger titles with small text teasers * Added optional AMP/HTML5 content enrichment feature 1.12-rc3 -------- * Fixes #459: Fixes GtkDoc warnings (Leiaz) * Fixes #415: Filter commands are not asynchronous (Rich Coe) * Fixes #363: Missing space above internal browser address bar (reported by nekohayo, patch by Mikel Olasagasti) * Fixes #208: All "Unread" search folder items marked read at once (Leiaz) * Fixes #251: Liferea does not always use theme icons when it is launched on system startup (reported by GreenLunar, fix by Leiaz) * Change headline column sorting in wide view to time sorted * Updated Finnish translation (Jorma Karvonen) * Updated Latvian translation (Rihards Prieditis) * Updated Albanian translation (Bensik Bleta) * Updated Hungarian translation (Balázs Úr) * Updated Brazlian translation (Rafael Ferreira) * Updated French translation (Guillaume Bernard) 1.12-rc2 -------- * Change all g_warnings() to g_print() for remote source to avoid "crashing" on errors. * Reorganized all UI definitions in separate files to simplify GtkBuilder handling. * Github #425: Add GeoRSS info and map link in item header (Mikel Olasagasti) * Github #407: Replacing deprecated elements in preferences (Leiaz) * Github #396: Create LifereaApplication type (Leiaz) * Github #434: Partial RFC3229+feed support for bandwidth savings (Daniel Aleksandersen) * Fixes Github #208: gtk_tree_store_get_path: assertion 'iter->stamp == priv->stamp' (reported by Mno-hime) * Fixes Github #403: Leftover OSM XSLT in item view (reported by Paul Gevers) * Fixes Github #423: Internal browser shows files system on go-back (Leiaz, reported by Paul Gevers) * Updated German translation * Github #441: Updated French translation (Surfoo) 1.12-rc1a --------- * Fixing missing header files 1.12-rc1 -------- * Github #348: Added support for downloading content that cannot be displayed by HTML widget (e.g. PDFs) (Leiaz) * Github #355: Migrate to Python3 libpeas loader (patch by picsel2) * Github #311: Upgrade to WebKit2 (patch by Leiaz) * Github #292: Show new item count in tray icon (patch by mozbugbox) * Github #297: Minimize to systray on window close (patch by Hugo Arregui) * Github #325: Auto-fitting, translated license (patches by GreenLunar and Adolfo Jayme-Barrientos) * Fixes Github #73: Problem with favicon update (reported by asl97) * Fixes Github #177, #350: Tray icon not scaled properly (patch by mozbugbox) * Removes GeoIP rendering via OSM to avoid exposing users to remote JS library resources. (reported by Paul Gevers) * Fixes Github #337: Case sensitive sorting (reported by Pi03k) * Fixes Github #361: Show all enclosuers (Leiaz) * Fixes Github #368: Segfault on liferea-feed-add (Leiaz) * Fixes Github #382: Broken Auto-Detect/No Proxy setting (Leiaz) * Fixes Github #383: Per feed don't use proxy setting is broken (reported by Leiaz) * Github #309: Update of Japanese translation (IWAI, Masaharu) * Github #329: Update of Hebrew translation (GreenLunar) * Github #330: Update of Spanish translation (Adolfo Jayme-Barrientos) * Update of Swedish translation (Andreas Ronnquist) 1.11.7 ------ * Github #287: Add support for media:group. (patch by Leiaz) * Github #287: Fixes issues with media:content. (patch by Leiaz) * Fixes Github #283: Bad .desktop categories definition (reported by Wuzzy2) * Fixes Github #279: Fixes rules no visible in searchdialog (patch by Leiaz) * Fixes Github #278: No "Download" tab in Tools/Preferences (docs error, reported by Anders Jonsson) * Fixes Github #83: Segfault when sorting feeds in folder (patch by Leiaz) * Fixes French translation (patch by polo2ro) * Github #300: Updated manpage (patch by GreenLunar) 1.11.6 ------ * Added "Do Not Track" support (enabled per default) * Github #193: Added x-scheme-handler/feed to desktop file (suggested by GreenLunar) * Github #209: Add image icons to plugins (by GreenLunar) * Github #210: Enable tests for parsing RFC822 dates with 2 digit year (patch by arunanbala) * Fixes Github #78: Shaky text in feed list (reported by GreenLunar) * Fixes Github #195: Out-dated documentation on enclose download (reported by brian-in-crawford) * Fixes Github #198: Traceback on popup notifications (reported by GreenLunar) * Fixes Github #216: Untranslatable strings (reported by GreenLunar) * Fixes Github #256: PyGIWarnings on loading plugins (patch by glitjs16) 1.11.5 ------ * Github #178: Implementing full screen mode for videos (mozbugbox) * Fixes Github #32: Prevent erroneous "Mark all as read" (reported by Mno-hime) * Improves Github #36, #113: UI lock up during refresh (suggested by mozbugbox) * Fixes Github #180: Removing item from (v)folder marks all read (reported by GreenLunar) * Fixes Github #140, #158: Vertical pane placement is forgotten. (patch by foresto) * Fixes Github #182: Missing config.h include in date.c (reported by Paul Gevers) * Update of Russian translation (bboa) 1.11.4 ------ * Fixes Github #154: Crashes while starting (corrupt icon) (reported by jcamposz) * Github #149: Fixes a random crash on startup (patch by mozbugbox) * Fixes Github #79: RTL ordering of Back/Forward icons (reported by GreenLunar) * Fixes Github #30: Segfault after updating from 1.8 to 1.10 (reported by vakuum) * Fixes Github #87: URL resolving wrong if base tag involved (reported by DanMan, fixed by mozbugbox) * Fixes all defects reported by Coverity scan * Simplied external browser handling. Now Liferea only supports the gtk_show_uri() launch mechanism for the system default browser and a user specified browser command. * Update of Albanian translation (Besnik Bleta) * Update of Hebrew translation (Genghis Khan) * Update of Spanish translation (Juan Campos Zambrana) * Fixes typo in Italian translation 1.11.3 ------ * Fixes Github #134: Broken default news feed. (reported by pvdl) * Fixes Github #133: Subscribe into TheOldReader categories * Fixes Github #122: Crashes at launch, "segmentation fault" (reported by geoffm) * Fixes some memory leaks (patch by Rich Coe) * Fixes Github #145: Incorrect method triggered for 'Launch External' (patch by mozbugbox) * Fixes Github #48: Window stays hidden on next start after Ctrl+W (reported by Jeff Fortin) * Expose LifereaHtmlView to GObject Introspection (patch by mozbugbox) * Improves Google Reader API error handling * Now using HTTPS only when accessing TheOldReader * Added LifereaNodeSourceActivatable interface to allow plugins implementing new node source types. * Downgrade enclosure drop warning from Glib warning to debug trace. 1.11.2 ------ * Fixes Github #132: Broken documentation link (reported by kallus) * Fixes Github #121: Wrapping issue in folder display (reported by Jeff Forting) * Fixes Github #114: Avoid termination on UTF-8 validation error * Fixes Github #90: Libnotify plugin not working (reported by asl97) * Fixes Github #86: Support HTTP content negotiation (suggested by DanMan) * Black-list some categories used by Google Reader clones that should not be visible. * Allowing browser history to go back to previously shown headline when browsing inside the item view. * Dropping offline option as this is duplicated with desktop environment in GNOME/network manager. * Fixes Github #100: Problems with dark Adwaita theme in GTK 3.14 (reported by majutsushi) * Fixes for preferences dialog width. (patch by Jeff Fortin) * Update of Arabic translation (Khaled Hosny) 1.11.1 ------ * Fixes Github #81: Inability to add subscriptions (reported by GreenLunar) * Fixes Javascript links not opening in new browser tabs * Updated Hebrew translation (Genghis Khan) * Fixes Github #88: Minor DE translation mistake (moraxy) 1.11.0 ------ * Added experimental InoReader support * Added experimental Reedah support * Fixes SF #1123: Mistakenly claims "TinyTinyRSS source is not self-updating" (reported by Dominik Grafenhoher) * Fixes SF #1119: Crash on font resize at startup. (reported by David Smith) * Fixes #1056, #1089, #1098: Honor preferences when opening links (patch by Daniel Seither) * Fixes #1117: Selecting last unread item in reduced feed list jumps to next feed (reported by Bruce Guenter) * Fixes missing "Via" metadata type (patch by Rich Coe) * Fixes incorrect new count reset handling in item_state.c and some of the node source implementations. * Fixes SF #1096: missing installation of liferea.convert file (reported by stqn) * Fixes SF #1135: liferea-add-feed doesn't process feed:https// (patch by Kevin Walke) * Fixes SF #1137, #1142: startup race with LifereaHtmlView (reported by Yanko Kaneti) * Fixes Github #13: Parsing errors not visible with dark themes (reported by Steve Kelly) * Fixes Github #29: Do not use bold text for feeds/folders with unread items in the leftmost treeview (repored by Jeff Fortin) * Fixes SF #1141: Liferea does not update feeds with TinyTinyRSS (reported by Dominik Grafenhofer, denk_mal, Fabian Henze) * Fixes SF #1150: subscription prop/source: not all fields and buttons visible (reported by David Smith) * Fixes Github #26: RTL comments appear incorrectly (reported by yaconf) * Fixes Github #27: Images do not autosize to fit the available space (reported by Jeff Fortin) * Fixes Github #34: Add TinyTinyRSS Enclosure Support (reported by Adrixan) * Fixes Github #43: "Any of the following" search condition doesn't work (reported by Jeff Fortin) * Fixes Github #49: Some dialogs scrolling areas do not request enough height (reported by Jeff Fortin) * Fixes Github #53: Doesn't automatically update feed name and favicon for new feed (reported by asl97) * Patch SF #224: Update to new libxml2 buffer API (Simon Kagedal Reimer) * Patch SF #209: Avoid copying list in itemset_merge_items (kaloyan) * Make Liferea use ETags and send If-None-Match (patch by Chris Siebenmann) * Support NOCONFIGURE for RPM builds (Charles A Edwards) * Rename README to README.md * Removing libindicate support (to be added as plugin maybe) * Removing libnotify support (to be added as plugin maybe) * Removing build in tray icon support * Added tray icon plugin * Added category/folder support for TheOldReader * Added folder auto-removal for TinyTinyRSS & TheOldReader * Updated README on plugin contribution * Updated Arabic translation (Khaled Hosny)
jperkin
pushed a commit
that referenced
this issue
May 3, 2019
Update pear to 1.10.9. It also contains update of Archive_Tar to 1.4.7 And Console_Getopt to 1.4.2. PEAR 1.10.8 (2019-03-13 14:45 UTC) Changelog: * PR #83: Drop track_errors from options * PR #84: Fix PHP 8 compatibility issues 1.10.9 (2019-03-13 14:04 UTC) Changelog: * PR #85: Fixes static calls for PHP 8 * PR #86: Adjust silencing check for PHP 8 * PR #87: Comparison fixes * PR #88: Only add bin_dir to PATH if not already there (fixes PHP Bug 75852) Archive_Tar 1.4.6 (2019-04-08 09:11 UTC) Changelog: * Improve path traversal detection for forward and backward slashes 1.4.7 (2019-04-08 09:18 UTC) Changelog: * Improved performance by increasing read buffer size Console_Getopt 1.4.2 (2019-03-18 08:52 UTC) Changelog: * Remove use of each(), which is removed in PHP 8
jperkin
pushed a commit
that referenced
this issue
Aug 26, 2019
Changelog:
New Libraries
Variant2: A never-valueless, strong guarantee implementation of std::variant, from Peter Dimov.
Updated Libraries
Align:
Support for any integral type in the integral versions of align_up and align_down.
Revised the implementation of aligned_allocator to no longer require a specialization for void.
Define propagate_on_container_move_assignment and is_always_equal in aligned_allocator.
Asio:
Improved performance slightly by eliminating a redundant move construction when completed handlers are dispatched.
Eliminated a compiler warning by annotating a case fall-through in the free function connect() implementation.
Fixed the is_*_buffer_sequence detection traits for user-defined sequence types.
Fixed some Windows-specific warnings about an incompatible pointer cast when obtaining the CancelIoEx entry point.
Changed to automatically set the defaults when opening a serial port on Windows.
Changed the serial port get_option() member function to be const.
Fixed a name hiding issue with the WinRT stream-oriented socket backend's shutdown function.
Applied a minor fix to the documentation for is_dynamic_buffer.
Added some support for Haiku OS.
Added wolfSSL compatability.
Changed to require C++17 or later for coroutines TS support with clang.
Fixed a doxygen generation problem in the tutorial.
Ensured example programs are correctly incorporated into the documentation.
Any:
Static initialization of the default constructed boost::any is now possible.
Fixed performance regression in assignment on a compilers without move-semantics.
Maintenance work.
Beast:
This version consists mostly of bug fixes and performance improvements.
Substantial work included for the split compilation mode, to reduce compile time when defining BOOST_BEAST_SEPARATE_COMPILATION.
We'd love to know how you or your company use Beast, consider adding an item to the Companies and Individuals Using Beast list.
See the full Release Notes for a complete list of changes.
Circular Buffer:
Correct doxygen generated reference to no longer show internal members. (Glen Fernandes)
Eliminate ubsan warning on add and sub. (Glen Fernandes)
Fix incorrect check in is_uninitialized. (Niklas Fejes)
Container:
Fixed bugs:
GitHub #47: "added alignment specification for small_vector".
GitHub #88: "Implement C++17 MoveAssignable requirements for self-move assignments".
GitHub #107: "Alignment ignored in resource_adaptor".
GitHub #109: "Get rid of integer overflow in copy_move_algo.hpp (-fsanitize=integer)".
GitHub #110: "Avoid gcc 9 deprecated copy warnings in new_allocator.hpp".
GitHub #112: "vector::resize() compilation error with msvc-10..12: data is not a member of boost::detail::aligned_storage".
GitHub #114: "Fix small_vector noexcept specification".
GitHub #116: "MSVC + boost 1.70 compilation error when windows.h is already included (detail/thread_mutex.hpp)".
GitHub #117: "flat_map/map::insert_or_assign with hint has wrong return types".
GitHub #118: "Non-unique inplace_set_difference used in in flat_tree_merge_unique and iterator invalidation in insert_unique".
GitHub #122: "Fix has_trivial_destructor_after_move".
GitHub #123: "With heterogeneous lookup, equal_range can result in a range with length greater than 1".
deque can now have options, using deque_options. The block size/bytes can be be specified.
static_vector can now have options, using static_vector_options. Alignment and throwing behaviour can be be specified.
small_vector can now have options, using small_vector_options. Alignment and growth factor can be be specified.
Context:
Add support for RISC-V LP64D
#72: Fix ABI violation on ppc64 ELFv2
#99: cleanup of stack if creating ucontext fails
Conversion:
Maintenance work.
Core:
Added functions alloc_construct, alloc_construct_n, alloc_destroy, and alloc_destroy_n in <boost/core/alloc_construct.hpp> for allocator aware and exception safe construction and destruction of objects and arrays. (Glen Fernandes)
Added constexpr functions first_scalar in <boost/core/first_scalar.hpp> for obtaining a pointer to the first scalar element of an array. Given a pointer of type T* they return a pointer of type remove_all_extents_t<T>*. (Glen Fernandes)
Added class template noinit_adaptor in <boost/core/noinit_adaptor.hpp> which is an allocator adaptor that converts any allocator into one whose construct(ptr) performs default initialization via placement new, and whose destroy(ptr) invokes the value_type destructor directly. (Glen Fernandes)
Added class template default_allocator in <boost/core/default_allocator.hpp>, which can serve as a minimal default allocator that has interface similar to C++20 std::allocator, supports configurations with disabled exceptions and does not have std as an associated namespace. The allocator uses operator new and operator delete for allocation. (Glen Fernandes)
In <boost/core/uncaught_exceptions.hpp> header, added workarounds for better compatibility with QNX SDP 7.0 when libc++/libc++abi libraries are used. (Andrey Semashev, #59)
The <boost/detail/sp_typeinfo.hpp> header is now marked as deprecated and will be removed in a future release. <boost/core/typeinfo.hpp> should be used instead. (Peter Dimov)
Dynamic Bitset:
Enabled hardware-assisted popcount on MSVC (#38).
Added support for boost::hash and std::hash (#45).
Support copy-initialization with default constructor (#48).
Endian:
Clarified requirements on the value type template parameter
Added support for float and double
Added endian_load, endian_store
Updated endian_reverse to correctly support all non-bool integral types
Moved deprecated names to the deprecated header endian.hpp
Fiber:
documentation for shared_work updated
Filesystem:
Fixed incorrect error_code returned from directory iterator increment when readdir_r is used.
For path, fixed rvalue-aware operator/ return type to return an rvalue instead of rvalue reference. This fixes leaving a dangling reference in the user's code if the result of operator/ is bound to a const reference. (#110)
Fixes for better compatibility with Windows CE. (#24)
Added minimal support for CMake. (#106)
Flyweight:
Maintenance work.
Histogram:
New features:
Support for thread-safe storages and new thread-safe accumulators
Support for compiling without exceptions/RTTI (increases performance by 10-20 %) (with Glen Fernandes)
Performance improvements for 1D and 2D histograms
boost::histogram::indexed now returns forward iterator range instead of input iterator range
boost::histogram::indexed_range::accessor is now non-copyable and acts like reference to cell value, making more algorithms from the C++ stdlib work
boost::histogram::algorithm::reduce with new slice option and option fusion
boost::histogram::algorithm::project accepts runtime indices for static histograms
Bug Fixes:
boost::histogram::algorithm::reduce also works on histograms that have some axis types without reduction support
boost::histogram::axis::traits::update now works correctly for boost::histogram::axis::variant
Other:
100 % test coverage
Reduced internal Boost dependencies
Improved documentation and examples
Guaranteed no-throw moves for all builtin axis types
Compile cleanly at higher warning levels
See changelog for more details.
IoStreams:
Fixed processing of multi-stream files (#87).
Added support for multi-threaded LZMA (#95).
Interprocess:
GitHub #85 ("warning: Implicit conversion loses integer precision").
GitHub #86 ("warning: Possible misuse of comma operator").
Intrusive:
GitHub #42: Documentation does not describe treap priority_of_value changes
GitHub #43: Fix tests with BOOST_INTRUSIVE_VARIADIC_TEMPLATES enabled
GitHub #45: Disable variadic templates for MSVC-12 to avoid ICEs
LexicalCast:
Added tests for boost::filesystem::path conversions #25.
Maintenance work, including #28.
Log:
New features:
Improved support for C++17 std::string_view in basic_formatting_ostream. The string view can now participate in character code conversion on output.
Added auto_newline formatter and stream manipulator. It can be used to ensure that formatted output always ends with a newline while avoiding duplicate newlines.
In the output stream, text file and text multi-file sink backends added support for configuring behavior with regard to appending a trailing newline to every formatted log record. Use auto_newline_mode named parameter of the backend constructor or call the set_auto_newline_mode method on the sink backend.
Note: The default behavior with regard to trailing newlines added by sink backends has changed slightly compared to the previous Boost.Log releases. The backends will now only add a trailing newline if there isn't one in the formatted log message string already. In previous releases a newline was added unconditionally.
Added support for passing arbitrary function objects in the filter and format named parameters to sink constructors and convenience functions for initializing sinks. For example, it is now possible to specify C++11 lambda functions directly in these parameters. (#63)
In the default filter and formatter factories used in filter and formatter parsers, added support for severity level attribute values of type boost::log::trivial::severity_level. For filters, the support is limited to attributes with "Severity" name.
Bug fixes:
Fixed incorrect parsing of components of the rotated file names while scanning for files in the text file sink backend. If the file name pattern ended with a placeholder (for example, a file counter), the scan_for_files method would not find files matching that pattern in the target storage, leaving them unmanaged. In particular, such files would not be deleted to free target storage. (#78)
Updated basic_formatting_ostream and basic_record_ostream to make it possible to overload stream output operators for pointers to user-defined types. User-defined operator<< overloads taking std::basic_ostream and a pointer argument should now be picked up by the compiler when the pointer is being written to one of Boost.Log streams. (#84)
See changelog for more details.
Math:
New features:
Catmull-Rom interpolator now works in C++11
Cardinal quadratic B-spline interpolation
Domain of elliptic integrals extended
sin_pi and cos_pi performance improvements
Forward-mode automatic differentiation
Vector valued barycentric rational interpolation
Ooura's method for evaluation of Fourier integrals
Bug fixes:
Multiple compatibility issues with Multiprecision fixed
Lambert-W fixed on a rare architecture
Metaparse:
New features:
In C++11 variadic template support for the following: sequence, one_of_c, one_of, repeated_one_of, repeated_one_of1, one_char_except_c, one_char_except.
Bug fixes:
BOOST_METAPARSE_STRING does not use out of range character values as template arguments.
any_of_c<> does not create empty array in C++14.
Move:
Git Issue #26: "Invalid iterator increment/decrement in the last iteration of adaptive_sort_combine_blocks".
Multi Array:
Simplify allocator support by using new alloc_construct_n and alloc_destroy_n facilities from Core. (Glen Fernandes)
Multi-index Containers:
Added variants of const_mem_fun and mem_fun for differently qualified member functions (issue #24).
Terse key specification syntax now correctly handles noexcept-specified member functions (issue #24).
Outcome:
Enhancements:
#184 As per request from Boost release managers, relocated version.hpp and revision.hpp into detail, and added the Boost licence boilerplate to the top of every source file which was missing one (I think). Also took the opportunity to run the licence restamping script over all Outcome, so copyright dates are now up to date.
#185 Add FAQ item explaining issue #185, and why we will do nothing to fix it right now.
#189 Refactored the OUTCOME_TRY implementation to use more clarified customisation points capable of accepting very foreign inputs. Removed the std::experimental::expected<T, E> specialisations, as those are no longer necessary. Fixed the documentation for the customisation points which previously claimed that they are ADL discovered, which they are not. Added a recipe describing how to add in support for foreign input types.
#183 Added a separate motivation/plug_error_code specifically for Boost.
Bug fixes:
OUTCOME_VERSION_MINOR hadn't been updated to 1.
#181 Fix issue #181 where Outcome didn't actually implement the strong swap guarantee, despite being documented as doing so.
#190 Fix issue #190 in Boost edition where unit test suite was not runnable from the Boost release distro.
#182 Fix issue #182 where trait::is_exception_ptr_available<T> was always true, thus causing much weirdness, like not printing diagnostics and trying to feed everything to make_exception_ptr().
#192 Fix issue #192 where the std::basic_outcome_failure_exception_from_error() was being defined twice for translation units which combine standalone and Boost Outcome's.
Parameter:
Upgraded keyword generation macro BOOST_PARAMETER_TEMPLATE_KEYWORD (#15).
Moved keyword generation macro BOOST_PARAMETER_NESTED_KEYWORD from Accumulators to this library (#28).
Added support for std::reference_wrapper and std::ref() (#16).
Moved boost::parameter::required, boost::parameter::optional, and boost::parameter::deduced metafunction definitions to their own header files in directory boost/parameter (#18).
Added support for Boost.Parameter-enabled function call operators (#20).
Added support for parameter category qualifiers "forward", "consume", and "move_from" (current qualifiers are "in", "out", and "in_out") (#21) (#23) based on http://www.modernescpp.com/index.php/c-core-guidelines-how-to-pass-function-parameters. Added new usage syntax BOOST_PARAMETER_NAME((object-name), namespace-name) qualifier(tag-name)) and BOOST_PARAMETER_NAME(qualifier(name)). (Existing code that uses qualifiers directly and correctly with BOOST_PARAMETER_FUNCTION and other code generation macros should remain unaffected for now, so no breaking changes.) The reason for the change in usage is to enable applying of parameter category constraints to Boost.Parameter-enabled functions and constructors invoked through argument composition. (Otherwise, it is currently possible to use argument composition to bypass parameter category constraints applied in BOOST_PARAMETER_FUNCTION et. al.)
Added support for perfect forwarding (#23) (#26), so that parameter::parameters::operator() can accept non-const rvalues. As a positive side effect, Boost.Parameter-enabled functions and constructors are no longer bound by BOOST_PARAMETER_MAX_ARITY on compilers that support perfect forwarding. User code can now check for this support by detecting the configuration macro BOOST_PARAMETER_HAS_PERFECT_FORWARDING, or manually turn off this support by defining the configuration macro BOOST_PARAMETER_DISABLE_PERFECT_FORWARDING.
Added metafunctions boost::parameter::is_argument_pack (#27), boost::parameter::are_tagged_arguments (#52), and boost::parameter::result_of::compose (#75).
Added variadic function template boost::parameter::compose() which takes in named arguments and returns them in an argument pack (#52). For compilers that do not support perfect forwarding, the configuration macro BOOST_PARAMETER_COMPOSE_MAX_ARITY determines the maximum number of arguments that boost::parameter::compose() can take in (#61).
Added code generation macros BOOST_PARAMETER_BASIC_FUNCTION_CALL_OPERATOR, BOOST_PARAMETER_BASIC_CONST_FUNCTION_CALL_OPERATOR, BOOST_PARAMETER_NO_SPEC_FUNCTION, BOOST_PARAMETER_NO_SPEC_MEMBER_FUNCTION, BOOST_PARAMETER_NO_SPEC_CONST_MEMBER_FUNCTION, BOOST_PARAMETER_NO_SPEC_FUNCTION_CALL_OPERATOR, BOOST_PARAMETER_NO_SPEC_CONST_FUNCTION_CALL_OPERATOR, BOOST_PARAMETER_NO_SPEC_CONSTRUCTOR, and BOOST_PARAMETER_NO_SPEC_NO_BASE_CONSTRUCTOR (#52).
Added support for Boost.MP11 (#47) (#66) (#70). User code can now check for this support by detecting the configuration macro BOOST_PARAMETER_CAN_USE_MP11, or manually turn off this support by defining the configuration macro BOOST_PARAMETER_DISABLE_MP11_USAGE.
Improved support for parameter-dependent return types via SFINAE (#73).
PtrContainer:
Fix a ptr_vector regression introduced in 1.66.0 (#24).
PolyCollection:
Maintenance work.
SmartPtr:
Added aliasing constructors to weak_ptr
Added weak_ptr<T>::empty()
Added enable_shared_from, shared_from, and weak_from
Stacktrace:
Fixed output of name(), source_location() and source_line() for the default constructed frame with thread sanitizer builds in C++98 mode.
Fixed output of long strings from name() and source_location() on MSVC #78.
Maintenance work.
Test:
Boost.test v3.11 see the Changes log for more details.
Breaking changes:
Boost.Test shows deprecation warnings if some very old headers as deprecated. If you encounter such warnings, please follow the indications: those headers will be removed in a future release.
New feature:
Now BOOST_TEST can be used to compare abstract types
Bug fixes and pull requests:
GitHub Issues: #209, #218
GitHub Pull Requests: #219, #224
Utility:
Implemented function template ostream_string in <boost/utility/ostream_string.hpp> to optimally write any kind of string content to an output stream. It satisfies the requirements of [ostream.formatted.reqmts]. (Glen Fernandes)
Optimized the stream output operators of basic_string_view and basic_string_ref to write directly to the rdbuf stream buffer. (Glen Fernandes)
Uuid:
Breaking change: MD5 name-based uuid generation was corrected to be identical on all endian systems. Define BOOST_UUID_COMPAT_PRE_1_71_MD5 to keep the result in a format compatible with 1.66 through 1.70. This does not affect the default name-based uuid generation which is based on SHA1. (#109)
Variant:
Fixed compilation of boost::apply_visitor with variants passed by non const reference in #68. Many thanks to Ed Catmur for providing the fix.
Added support for std::hash (#49). Macro BOOST_VARIANT_DO_NOT_SPECIALIZE_STD_HASH could be defined to avoid those specializations.
Added micro optimizations for binary size and performance by Nikita Kniazev in #63 and #66.
Maintenance work, including #64 by Nikita Kniazev and #67 by Hans Dembinski.
YAP:
Added an example showing how to make self-evaluating YAP expressions (that is, expressions that don't need an explicit call to evaluate() or transform()).
jperkin
pushed a commit
that referenced
this issue
Oct 6, 2019
Changelog:
2.0.1
Bug Fixes
Do not register hooks for documents of type :pages (#94)
Append theme's sass path after all sanitizations (#96)
2.0.0
Major Enhancements
Migrate to sassc gem (#75)
Use and test sassc-2.1.0 pre-releases and beyond (#86)
Drop support for Ruby 2.3 (#90)
Minor Enhancements
Generate Sass Sourcemaps (#79)
Configure Sass to load from theme-gem if possible (#80)
SyntaxError line and filename are set by SassC (#85)
Memoize #jekyll_sass_configuration (#82)
Development Fixes
Target Ruby 2.3 (#70)
Lint with rubocop-jekyll (#73)
Clear out RuboCop TODO (#87)
Cache stateless regexes in class constants (#83)
Add appveyor.yml (#76)
Bug Fixes
Fix rendering of sourcemap page (#89)
2.0.0.pre.beta
Major Enhancements
Migrate to sassc gem (#75)
Drop support for Ruby 2.3 (#90)
Minor Enhancements
Generate Sass Sourcemaps (#79)
Configure Sass to load from theme-gem if possible (#80)
SyntaxError line and filename are set by SassC (#85)
Memoize #jekyll_sass_configuration (#82)
Development Fixes
Target Ruby 2.3 (#70)
Lint with rubocop-jekyll (#73)
Clear out RuboCop TODO (#87)
Cache stateless regexes in class constants (#83)
Add appveyor.yml (#76)
jperkin
pushed a commit
that referenced
this issue
Oct 20, 2019
Changelog:
2.0.1
Bug Fixes
Do not register hooks for documents of type :pages (#94)
Append theme's sass path after all sanitizations (#96)
2.0.0
Major Enhancements
Migrate to sassc gem (#75)
Use and test sassc-2.1.0 pre-releases and beyond (#86)
Drop support for Ruby 2.3 (#90)
Minor Enhancements
Generate Sass Sourcemaps (#79)
Configure Sass to load from theme-gem if possible (#80)
SyntaxError line and filename are set by SassC (#85)
Memoize #jekyll_sass_configuration (#82)
Development Fixes
Target Ruby 2.3 (#70)
Lint with rubocop-jekyll (#73)
Clear out RuboCop TODO (#87)
Cache stateless regexes in class constants (#83)
Add appveyor.yml (#76)
Bug Fixes
Fix rendering of sourcemap page (#89)
2.0.0.pre.beta
Major Enhancements
Migrate to sassc gem (#75)
Drop support for Ruby 2.3 (#90)
Minor Enhancements
Generate Sass Sourcemaps (#79)
Configure Sass to load from theme-gem if possible (#80)
SyntaxError line and filename are set by SassC (#85)
Memoize #jekyll_sass_configuration (#82)
Development Fixes
Target Ruby 2.3 (#70)
Lint with rubocop-jekyll (#73)
Clear out RuboCop TODO (#87)
Cache stateless regexes in class constants (#83)
Add appveyor.yml (#76)
jperkin
pushed a commit
that referenced
this issue
Dec 12, 2019
Pkgsrc changes: * Remove now integrated patch. Upstream changes: This release contains a number of security related fixes, contributed by X41 D-Sec. They have conducted a security audit of Unbound, funded by OSTIF. The previous CVEs fixed in 1.9.4 and 1.9.5 were the most important ones, less important fixes and side findings for more robust code have been included in this release, alongside a normal number of bug fixes. The sort order for included config snippets is now ascending by name, it previously was reversed due to an oversight. Most config snippets do not depend on the order as they add a stub or forward zone or some server: section config entries. Features: - The unbound.conf includes are sorted ascending, for include statements with a '*' from glob. - drop-tld.diff in contrib/ : adds option drop-tld: yesno that drops 2 label queries, to stop random floods. Apply with patch -p1 < contrib/drop-tld.diff and compile. From Saksham Manchanda (Secure64). Please note that we think this will drop DNSKEY and DS lookups for tlds and hence break DNSSEC lookups for downstream clients. - Add new configure option `--enable-fully-static` to enable full static build if requested; in relation to #91. - Add make distclean that removes everything configure produced, and make maintainer-clean that removes bison and flex output. - unbound-fuzzers.tar.bz2 in contrib/ : three programs for fuzzing, that are 1:1 replacements for unbound-fuzzme.c that gets created after applying the contrib/unbound-fuzzme.patch. They are contributed by Eric Sesterhenn from X41 D-Sec. Bug Fixes: - Fix that pkg-config is setup before --enable-systemd needs it. - Fix contrib/fastrpz.patch asprintf return value checks. - ipset module #28: log that an address is added, when verbosity high. - ipset: refactor long routine into three smaller ones. - updated Makefile dependencies. - squelch DNS over TLS errors 'ssl handshake failed crypto error' on low verbosity, they show on verbosity 3 (query details), because there is a high volume and the operator cannot do anything for the remote failure. Specifically filters the high volume errors. - Fix #71: fix openssl error squelch commit compilation error. - Fix #72: configure --with-syslog-facility=LOCAL0-7 with default LOG_DAEMON (as before) can set the syslog facility that the server uses to log messages. - Use explicit bzero for wiping clear buffer of hash in cachedb, reported by Eric Sesterhenn from X41 D-Sec. - Fix #78: Memory leak in outside_network.c. - Merge pull request #76 from Maryse47: Improvements and fixes for systemd unbound.service. - oss-fuzz badge on README.md. - Fix fix for #78 to also free service callback struct. - Fix for oss-fuzz build warning. - Fix wrong response ttl for prepended short CNAME ttls, this would create a wrong zero_ttl response count with serve-expired enabled. - Merge #80 from stasic: Improve wording in man page. - Merge #82 from hardfalcon: Downgrade CAP_NET_ADMIN to CAP_NET_RAW in unbound.service. - Merge #81 from Maryse47: Consistently use /dev/urandom instead of /dev/random in scripts and docs. - Merge #83 from Maryse47: contrib/unbound.service.in: do not fork into the background. - Merge #85 for #84 from sam-lunt: Add kill capability to systemd service file to fix that systemctl reload fails. - Merge #87 from hardfalcon: Fix contrib/unbound.service.in, Drop CAP_KILL, use + prefix for ExecReload= instead. - Merge #90 from vcunat: fix build with nettle-3.5. - Fix for CVE-2019-16866. That fix is also in 1.9.4. - Merge #86 from psquarejho: Added -b source address option to smallapp/unbound-anchor.c, from Lukas Wunner. - Add doxygen comments to unbound-anchor source address code, in #86. - Merge #97: manpage: Add missing word on unbound.conf, from Erethon. - Fix #99: Memory leak in ub_ctx (event_base will never be freed). - Fix #109: check number of arguments for stdin-pipes in unbound-control and fail if too many arguments. - Merge #102 from jrtc27: Add getentropy emulation for FreeBSD. - iana portlist updated. - contrib/fastrpz.patch updated to apply for current code. - fixes for splint cleanliness, long vs int in SSL set_mode. - In unbound-host use separate variable for get_option to please code checkers. - update to bison output of 3.4.1 in code repository. - Provide a prototype for compat malloc to remove compile warning. - Portable grep usage for reuseport configure test. - Check return type of HMAC_Init_ex for openssl 0.9.8. - gitignore .source tempfile used for compatible make. - Fix for CVE-2019-18934, shell execution in ipsecmod. This fix is also in 1.9.5. - Fix authzone printout buffer length check. - Fixes to please lint checks. - Fix Integer Overflow in Regional Allocator, reported by X41 D-Sec. - Fix Unchecked NULL Pointer in dns64_inform_super() and ipsecmod_new(), reported by X41 D-Sec. - Fix Out-of-bounds Read in rr_comment_dnskey(), reported by X41 D-Sec. - Fix Integer Overflows in Size Calculations, reported by X41 D-Sec. - Fix Integer Overflow to Buffer Overflow in sldns_str2wire_dname_buf_origin(), reported by X41 D-Sec. - Fix Out of Bounds Read in sldns_str2wire_dname(), reported by X41 D-Sec. - Fix Out of Bounds Write in sldns_bget_token_par(), reported by X41 D-Sec. - Fix Out of Bounds Read in rrinternal_get_owner(), reported by X41 D-Sec. - Fix Race Condition in autr_tp_create(), reported by X41 D-Sec. - Fix Shared Memory World Writeable, reported by X41 D-Sec. - Adjust unbound-control to make stats_shm a read only operation. - Fix Weak Entropy Used For Nettle, reported by X41 D-Sec. - Fix Randomness Error not Handled Properly, reported by X41 D-Sec. - Fix Out-of-Bounds Read in dname_valid(), reported by X41 D-Sec. - Fix Config Injection in create_unbound_ad_servers.sh, reported by X41 D-Sec. - Fix Local Memory Leak in cachedb_init(), reported by X41 D-Sec. - Fix Integer Underflow in Regional Allocator, reported by X41 D-Sec. - Upgrade compat/getentropy_linux.c to version 1.46 from OpenBSD. - Synchronize compat/getentropy_win.c with version 1.5 from OpenBSD, no changes but makes the file, comments, identical. - Upgrade compat/getentropy_solaris.c to version 1.13 from OpenBSD. - Upgrade compat/getentropy_osx.c to version 1.12 from OpenBSD. - Changes to compat/getentropy files for, no link to openssl if using nettle, and hence config.h for HAVE_NETTLE variable. compat definition of MAP_ANON, for older systems. ifdef stdint.h inclusion for older systems. ifdef sha2.h inclusion for older systems. - Fixed Compat Code Diverging from Upstream, reported by X41 D-Sec. - Fix compile with --enable-alloc-checks, reported by X41 D-Sec. - Fix Terminating Quotes not Written, reported by X41 D-Sec. - Fix Useless memset() in validator, reported by X41 D-Sec. - Fix Unrequired Checks, reported by X41 D-Sec. - Fix Enum Name not Used, reported by X41 D-Sec. - Fix NULL Pointer Dereference via Control Port, reported by X41 D-Sec. - Fix Bad Randomness in Seed, reported by X41 D-Sec. - Fix python examples/calc.py for eval, reported by X41 D-Sec. - Fix comments for doxygen in dns64. - Fix dname loop maximum, reported by Eric Sesterhenn from X41 D-Sec. - Fix compiler warnings. - Merge pull request #122 from he32: In tcp_callback_writer(), don't disable time-out when changing to read. - Merge pull request #124 from rmetrich: Changed log lock from 'quick' to 'basic' because this is an I/O lock. - Fix text around serial arithmatic used for RRSIG times to refer to correct RFC number. - Fix Assert Causing DoS in synth_cname(), reported by X41 D-Sec. - Fix similar code in auth_zone synth cname to add the extra checks. - Fix Assert Causing DoS in dname_pkt_copy(), reported by X41 D-Sec. - Fix OOB Read in sldns_wire2str_dname_scan(), reported by X41 D-Sec. - Fix Out of Bounds Write in sldns_str2wire_str_buf(), reported by X41 D-Sec. - Fix Out of Bounds Write in sldns_b64_pton(), fixed by check in sldns_str2wire_int16_data_buf(), reported by X41 D-Sec. - Fix Insufficient Handling of Compressed Names in dname_pkt_copy(), reported by X41 D-Sec. - Fix Out of Bound Write Compressed Names in rdata_copy(), reported by X41 D-Sec. - Fix Hang in sldns_wire2str_pkt_scan(), reported by X41 D-Sec. This further lowers the max to 256. - Fix snprintf() supports the n-specifier, reported by X41 D-Sec. - Fix Bad Indentation, in dnscrypt.c, reported by X41 D-Sec. - Fix Client NONCE Generation used for Server NONCE, reported by X41 D-Sec. - Fix compile error in dnscrypt. - Fix _vfixed not Used, removed from sbuffer code, reported by X41 D-Sec. - Fix Hardcoded Constant, reported by X41 D-Sec. - make depend - Fix lock type for memory purify log lock deletion. - Fix testbound for alloccheck runs, memory purify and lock checks. - update contrib/fastrpz.patch to apply more cleanly. - Fix Make Test Fails when Configured With --enable-alloc-nonregional, reported by X41 D-Sec. - Fix ipsecmod compile - Fix Makefile.in for ipset module compile, from Adi Prasaja.
jperkin
pushed a commit
that referenced
this issue
Jan 3, 2020
0.14 (July 30, 2018)
Bug Fixes
* The state file that xmonad uses while restarting itself is now
removed after it is processed. This fixes a bug that manifested in
several different ways:
* Names of old workspaces would be resurrected after a restart
* Screen sizes would be wrong after changing monitor configuration
(#90)
* spawnOnce stopped working (xmonad/xmonad-contrib#155)
* Focus did not follow when moving between workspaces (#87)
* etc.
* Recover old behavior (in 0.12) when focusFollowsMouse == True: the
focus follows when the mouse enters another workspace but not moving
into any window.
* Compiles with GHC 8.4.1
* Restored compatability with GHC version prior to 8.0.1 by removing
the dependency on directory version 1.2.3.
0.13 (February 10, 2017)
Breaking Changes
* When restarting xmonad, resume state is no longer passed to the next
process via the command line. Instead, a temporary state file is
created and xmonad's state is serialized to that file.
* When upgrading to 0.13 from a previous version, the --resume command
line option will automatically migrate to a state file.
* This fixes issue #12.
Enhancements
* You can now control which directory xmonad uses for finding your
configuration file and which one is used for storing the compiled
version of your configuration. In order of preference:
* New environment variables. If you want to use these ensure you set
the correct environment variable and also create the directory it
references:
* XMONAD_CONFIG_DIR
* XMONAD_CACHE_DIR
* XMONAD_DATA_DIR
* The ~/.xmonad directory.
* XDG Base Directory Specification directories, if they exist:
* XDG_CONFIG_HOME/xmonad
* XDG_CACHE_HOME/xmonad
* XDG_DATA_HOME/xmonad
* If none of these directories exist then one will be created using
the following logic: If the relevant environment variable mentioned
in step (1) above is set, the referent directory will be created and
used. Otherwise ~/.xmonad will be created and used.
* This fixes a few issues, notably #7 and #56.
* A custom build script can be used when xmonad is given the
--recompile command line option. If an executable named build exists
in the xmonad configuration directory it will be called instead of
ghc. It takes one argument, the name of the executable binary it
must produce.
* This fixes #8. (One of two possible custom build solutions. See the
next entry for another solution.)
* For users who build their xmonad configuration using tools such as
cabal or stack, there is another option for executing xmonad.
* Instead of running the xmonad executable directly, arrange to have
your login manager run your configuration binary instead. Then, in
your binary, use the new launch command instead of xmonad.
* This will keep xmonad from using its configuration file
checking/compiling code and directly start the window manager
without execing any other binary.
* See the documentation for the launch function in XMonad.Main for
more details.
* Fixes #8. (Second way to have a custom build environment for
XMonad. See previous entry for another solution.)
jperkin
pushed a commit
that referenced
this issue
Jan 10, 2020
1.6.12 2018-01-17 * Populate metro and area code when performing lookups in IPv6 City databases. Previously this was only done when using IPv4 City databases. 1.6.11 2017-05-15 * Fix use of a NULL pointer when opening a corrupt database with `GeoIP_open`. Reported by Stephan Zeisberg. GitHub #87. 1.6.10 2017-03-29 * GeoIP_database_info now returns the full version string rather than incorrectly truncating it. GitHub #79. * This API is now distributed with a small test copy of GeoIP.dat rather than a full copy. * Fix issue where Visual Studio 2015 was optimizing out initialization code. Reported and fixed by Scott Godin. GitHub #81. * Fix test/benchmark on Windows. Gisle Vanem. GitHub #75.
jperkin
pushed a commit
that referenced
this issue
Apr 6, 2020
1.10.3 ====== * Fixed ``TypeError`` (or wrong rendered class name) when an annotation is a generic class that has a ``name`` property 1.10.2 ====== * Fixed inner classes missing their parent class name(s) when rendered 1.10.1 ====== * Fixed ``KeyError`` when encountering mocked annotations (``autodoc_mock_imports``) 1.10.0 ====== * Rewrote the annotation formatting logic (fixes Python 3.5.2 compatibility regressions and an ``AttributeError`` regression introduced in v1.9.0) * Fixed decorator classes not being processed as classes 1.9.0 ===== * Added support for typing_extensions_ * Added the ``typehints_document_rtype`` option (PR by Simon-Martin Schröder) * Fixed metaclasses as annotations causing ``TypeError`` * Fixed rendering of ``typing.Literal`` * Fixed OSError when generating docs for SQLAlchemy mapped classes * Fixed unparametrized generic classes being rendered with their type parameters (e.g. ``Dict[~KT, ~VT]``) .. _typing_extensions: https://pypi.org/project/typing-extensions/ 1.8.0 ===== * Fixed regression which caused ``TypeError`` or ``OSError`` when trying to set annotations due to PR #87 * Fixed unintentional mangling of annotation type names * Added proper ``:py:data`` targets for ``NoReturn``, ``ClassVar`` and ``Tuple`` * Added support for inline type comments (like ``(int, str) -> None``) (PR by Bernát Gábor) * Use the native AST parser for type comment support on Python 3.8+ 1.7.0 ===== * Dropped support for Python 3.4 * Fixed unwrapped local functions causing errors (PR by Kimiyuki Onaka) * Fixed ``AttributeError`` when documenting the ``__init__()`` method of a data class * Added support for type hint comments (PR by Markus Unterwaditzer) * Added flag for rendering classes with their fully qualified names (PR by Holly Becker) 1.6.0 ===== * Fixed ``TypeError`` when formatting annotations from a class that inherits from a concrete generic type (report and tests by bpeake-illuscio) * Added support for ``typing_extensions.Protocol`` (PR by Ian Good) * Added support for ``typing.NewType`` (PR by George Leslie-Waksman) 1.5.2 ===== * Emit a warning instead of crashing when an unresolvable forward reference is encountered in type annotations 1.5.1 ===== * Fixed escape characters in parameter default values getting lost during signature processing * Replaced use of the ``config-inited`` event (which inadvertently required Sphinx 1.8) with the ``builder-inited`` event 1.5.0 ===== * The setting of the ``typing.TYPECHECKING`` flag is now configurable using the ``set_type_checking_flag`` option 1.4.0 ===== * The extension now sets ``typing.TYPECHECKING`` to ``True`` during setup to include conditional imports which may be used in type annotations * Fixed parameters with trailing underscores (PR by Daniel Knell) * Fixed KeyError with private methods (PR by Benito Palacios Sánchez) * Fixed deprecation warning about the use of formatargspec (PR by Y. Somda) * The minimum Sphinx version is now v1.7.0 1.3.1 ===== * Fixed rendering of generic types outside the typing module (thanks to Tim Poterba for the PR)
jperkin
pushed a commit
that referenced
this issue
Jun 7, 2020
Update ruby-jekyll-archives to 2.2.1. 2.2.1 (2019-03-23) Minor Enhancements * Make Archive subclass of Page (#67) * Don't limit slugs/title to strings (#41) * Enable incremental operation (#58) * Remove deprecated defs (#89) Development Fixes * Target Ruby 2.3 * Allow testing and using with Jekyll 4.x (#133) * Update Travis config and Gemfile for Ruby < 2.2.2 support (#68) * Consolidate History file to work with jekyllbot (#80) * Remove Travis test for Ruby 1.9 (#87) * Inherit Jekyll's rubocop config for consistency (#65) * Bump travis ruby versions (#91) * Fix Travis build error (#93) * Define path with dir (#105) * Appease Rubocop (#104) * update Rubocop and Travis config (#110) * Update .travis.yml (#111) * Modernize tests & linting (#114) * Test against Ruby 2.5 (#118) * Lint with rubocop-jekyll (#128) Documentation * Update Installation Guide (#116) * docs/configuration: GitHub table display was messed up (#96) * Small updates for consistency across document (#130)
jperkin
pushed a commit
that referenced
this issue
Aug 15, 2020
3.2.5
Added
IMAP Daemon: added switch to control the diffential state reload
(mailbox_update_strategy=2), more information in dbmail.conf,
mailbox_update_strategy_2_max_iterations [#81]
IMAP Daemon: added switch to control UNSEEN first message in SELECT commands
Changed
IMAP Daemon: allow reporting UID COPY success in case of various failures
(except quota), reporting issues are sent to error log as warnings [#87]
Optimizations
optimizing differential state [#81]
optimizing fetch message headers [#85]
Issues
fixing issue related to copy message in regard to RFC 3501, section 6.4.8
fixing issues related group_concat for PostgreSql [#75], [#78]
fixing issue related to lastRowId [#71]
fixing issues related with differential update [#70], [#73]
fixing proc not being used in BSD systems [#74]
IMAP Daemon: segmentation fault [#68]
3.2.4
Added
IMAP Daemon: mailbox-update-strategy switch (see dbmail.conf), experimental
support for application_name in database connection uri
IMAP Daemon: mailbox_search_strategy switch (see dbmail.conf)
Changed
systemd unit changed to type notify
mailbox state is build using only valid messages [#39]
Optimizations
IMAP Daemon: optimization of sql queries in relation to message headers
libevent increased priority on accepting new connections
libevent optimization on reading and writing to sockets
simplify libzdb configuration (AC_CHECK_HEADERS)
Issues
fix segmentation fault in imap_append_hash_as_string [#12]
dbmail-users: sql issue on deleting alias user [#18]
IMAP Daemon: generation of invalid BODYSTRUCTURE in Content-Type field [#23]
fix support for jemalloc latest version [#35]
IMAP Deamon: BYE Command now offers optional message even on normal operations
IMAP Deamon: idle message now offers optional message (* OK Still Here)
IMAP Daemon: random hangs when single user is connected [#37]
fix fd leaks
IMAP Daemon: fix MODIFIED keyword, too many '[' and ']'
fix segmentation fault in find_end_of_header
fix gcc 10 compilation issue, duplicated definition
jperkin
pushed a commit
that referenced
this issue
Sep 16, 2020
Update ruby-license-acceptance package to 2.1.2. 2.1.2 (2020-09-09) * Case insensitively check acceptance #88 (phiggins) 2.1.1 (2020-09-09) * Update chefstyle requirement from 1.2.1 to 1.3.2 in /components/ruby #85 (dependabot-preview[bot]) 2.1.0 (2020-09-09) * Update mixlib-cli requirement from ~> 1.7 to ~> 2.1 in /components/ruby #80 (dependabot-preview[bot]) * Fix product reader tests. #81 (phiggins) * Fail license acceptance if the user provides an unrecognized value #86 (phiggins) * improve initial load perf with autoloading expensive gems #87 (mwrock) 2.0.0 (2020-08-12) * Fix minor spelling mistakes #78 (tas50) * Remove support for Ruby 2.3 and bump tty deps #79 (tas50)
jperkin
pushed a commit
that referenced
this issue
Feb 15, 2021
Added: -Add syntax highlighting configuration for V (#78) -Add the ability to execute external commands from the editor (#83) -Improve file opening error messages for config files (#91) Fixed: -Android: fix a bug (#87) related to a SELinux policy that would cause Kibi to crash on certain Android versions when setting the termios (#92).
jperkin
pushed a commit
that referenced
this issue
Feb 23, 2021
Changelog: PRJ_VER=1.5.1 SUMMARY=Fix the Ctrl, Numpad and selection keys handling REDHAT_BUGZILLA=1337185 [Changes] - Enhancement: - Fix: + GH issue #73: Ctrl, Alt, Ins causes the pre-edit duplicate commit + GH issue #74: Failed to clean the PreEdit when changing input focus + GH issue #79: Failed to input space when "space-as-selection" + GH issue #87 Modify dropdown menu for selecting keys + GH issue #88 Numpad should be able to select + RHBZ #1337185 - Cannot add phrases with Ctrl A.k.a GH issue #63 Thank for contribution from hiunnhue - Acknowledge: + Obata Akio contributed pull request 71, 72, 73 + hiunnhue contributed pull request 75, 76, 77, 78, 80, 81, 82, 83, 84, 86, 87, 90, 91, 92, 94 + hiunnhue fixed issue 73, 74, 79, 87, 88, 90, 91, 92, 94
jperkin
pushed a commit
that referenced
this issue
Aug 23, 2021
version 1.3.1 - expect_error, _warning, _message, _stdout now accept ... arguments that are passed as extra arguments to 'grepl', when a pattern is provided (Thanks to Bart-Jan van Rossum for the GH issue). - Package now also resets locale settings after each file run, and 'report_side_effects' also tracks changes in locale settings. - Run test directories via RStudio addin. (Thanks to Matthijs Berends for PR #83) - tinytest used to implicitly depend on R >= 3.2.0 because of using 'trimws' and 'dir.exists'. (Thanks to Sebastian Meyer for figuring this out and thanks to Matthijs Berends for PR #84 solving this) - 'tinytest' objects now store the stack trace as a list of calls. When needed, the relevant part of the trace is printed, but only when printing the long form. (thanks to Jonas Kristoffer Lindeloef for suggesting) - Improved printing while running tests - Graphics produced in tests are now written to nullfile() (Thanks to Henrik Bengtsson for the suggestion). (nullfile() is defined in-package when built on R < 3.6.0). - Fixed time measurement when directory (or pkg) is tested and tests take more than an minute. - Fix: set_env variables would not be unset in all cases (Thanks to Henrik Bengtsson for the PR) - Fix in 'expect_equal': reporting in case of differing attributes (Thanks to Ott Toomet for reporting #80). - Fix in build_install_test: better reading of DESCRIPTION file (Thanks to Christof Stepper for PR #87) version 1.2.4 - 'test_package' gains 'lib.loc' argument. - New function 'expect_inherits' to check the class of an object (thanks to Sebastian Meyer for suggesting). - Printing of file exit message is now shorter and on same line as test report (thanks for Dirk Eddelbuettel for suggesting). - Duration per file is now reported, total duration is stored (thanks to Dirk Eddelbuettel for suggesting) - Small improvements in difference reporting. - Fix: avoid truncated printing in case of long diff reporting (thanks to Sebastian Meyer for the PR) - Fix: default pattern for test files was "^test_", is now "^test" as documented. (Thanks to Sebastian Meyer for the PR). - Fix: it is now easier to put tests that you do not want to install under /tests/somedir. - Internal: updated tinytest.format method to conform to new R CMD check demand. (Thanks to Brian Ripley for the warning). version 1.2.3 - Added example to using tinytest vignette on mocking databases (Thanks to Thomas Fuchs for working this out). - 'expect_stdout' now handles multi-line output. (Thanks to John Blischak for reporting). - A message is issued when a test file uses 'tinytest::expect': such tests are not registered (thanks to James Thompson for issuing a ticket on this).
jperkin
pushed a commit
that referenced
this issue
Dec 2, 2021
Change log: 0.5.7 ====== - Bug Fixes: - Update Appdata file and use the same description everywhere - Prevent warning when saving a deleted file via a symlink (#135) - Conform to Freedesktop.org standard for file naming - Properly disconnect signal handlers - Be sure not to disable highlighting when disabling regex search - Check for realpath() - Check for `errno.h` required by CI - Fix a nasty memory leak - Fix "Save As" procedure when it recurses - Allow drag and drop on selections in the textview - Code cleanup: Remove a useless dnd signal forwarding - Code cleanup: Simplify `mousepad_file_save()` - Fix a small memory leak - Improve trash can management - Update read-only status on file location change/validation - Monitor also the target of broken links - Fix monitoring of files opened through a symlink - Allow drag and drop of broken links - Follow symlinks if necessary when checking if a file exists - Replace `g_realloc()` with `g_renew()` - Replace `g_malloc*()` with `g_new*()` (!113) - Make sure that `gtk_selection_data_get_uris()` returned non-NULL (!113) - Initialize `contents` and use it to guard `g_file_replace_contents` (!113) - Fix an unlikely memory leak - Make CSD consistent with other Xfce windows (#145) - Translation Updates: Estonian, Greek, Kazakh, Polish, Serbian, Slovenian, Swedish, Ukrainian 0.5.6 ====== - New Features: - Add session backup and restore - Remember windows and tabs (#21, !108) - Handle unsaved documents (#32, !109) - DE session support (#3, !110) - Extend the use of recent history (!107) - Add use of `GtkSourceView:smart-backspace` (!101) - Add a "Move Words" action (!100) - Appearance Changes: - Add a setting to control tab expansion (#100) - Prefs dialog: Substitute CSD for status bar visibility - Add a "File" tab to the prefs dialog (!108) - Make search input fields less flickery (!104) - Allow saving non-existent, empty but named file (#120, !103) - Enable "Save" action for read-only documents (#126, !103) - Make "Find as you type" an option (!102) - Reveal hidden setting "indent-on-tab" (!101) - Code Refactoring: - A review of duplicated view-related actions (#127) - Tests: - Add a test plugin to monitor application state (!105) - Add a test script for Mousepad (!99) - Bug Fixes: - Filter notebook click events also on y-coordinate (#144) - Allow to open files from the trash can (#141, !112) - Monitor file deletion (#140, !111) - Printing: Create config file if it does not exist - Check all windows for the file to be opened - Fix wrong externally modified document in some situations - Plugin support: Properly handle plugin settings (#136) - Direct monitoring of symlink targets - Set the state of submenu actions - print-dialog: Fix some memory leaks - Fix a type inconsistency in the "encoding-changed" signal - Always check if the user has explicitly set a filetype - Fix monitoring events to listen to - Ensure statefull actions exist until their state is recovered - Fix GVariant-related memory leaks - Do not warn if the plugin directory does not exist - Add a sanity check on the window for "Externally Modified" - Do not set the style scheme id as translatable - Properly update recent menu in case of file deletion - CSD: Set the decoration layout for all windows - Add a sanity check on file location for monitoring - Add "preferences" action to `mousepad.desktop` (#130) - Translation Updates: Albanian, Arabic, Armenian (Armenia), Basque, Belarusian, Bulgarian, Catalan, Chinese (China), Chinese (Taiwan), Croatian, Czech, Danish, Dutch, Eastern Armenian, English (Australia), English (United Kingdom), Estonian, Finnish, French, Galician, German, Greek, Hebrew, Hungarian, Icelandic, Indonesian, Interlingue, Italian, Japanese, Kazakh, Korean, Lithuanian, Malay, Norwegian Bokmål, Occitan (post 1500), Persian (Iran), Polish, Portuguese, Portuguese (Brazil), Romanian, Russian, Serbian, Slovak, Slovenian, Spanish, Swedish, Thai, Turkish, Ukrainian, Uyghur 0.5.5 ====== - New Features: - Add a `.desktop` file to make Mousepad appear in Xfce settings (!94) - Add a command line option to open the prefs dialog (!94) - Plugin support (!92) - Add gspell plugin (#1, !92) - Disable and wipe recent history if recent-menu-items is set to 0 (#112, !89) - Support -ve line and column values for "Go to" location (#113, !84) - Appearance Changes: - Switch to client-side decorations (!97) - Code Refactoring: - Remove Xfconf dependency (#60, #122, !98) - A general review of sanity checks - A review of window lifetime management - A review of document lifetime management - Automate and sanitize memory management of sources - A small review of GSettings use - Do not use `== (TRUE|FALSE)` for boolean conditions - Bug Fixes: - Fix actions to show/hide bars in fullscreen mode (#129) - Fix broken "Revert" action - Fix and extend "Move Lines" action (#87, #116, !96) - Support for drag and drop of tabs when search is active - Do a silent search when changing tabs with the search bar enabled - Use get/set_real_line_offset () functions for "Paste as Column" (#114, !91) - Restore cursor position after transpose (#115, !88) - Fix "Delete Line" action (#117, !86) - Fix recent_sort function (!90) - Reset line and column number if not given on command line (#121, !87) - menu: "Spaces to Tabs" converter converts leading spaces (#118, !85) - Make window require attention when opening new tabs (2) (#119) - Translation Updates: Albanian, Arabic, Armenian (Armenia), Basque, Belarusian, Bulgarian, Catalan, Chinese (China), Chinese (Taiwan), Croatian, Czech, Danish, Dutch, Eastern Armenian, English (Australia), English (United Kingdom), Estonian, Finnish, French, Galician, German, Greek, Hebrew, Hungarian, Icelandic, Indonesian, Interlingue, Italian, Japanese, Kazakh, Korean, Lithuanian, Malay, Norwegian Bokmål, Occitan (post 1500), Persian (Iran), Polish, Portuguese, Portuguese (Brazil), Romanian, Russian, Serbian, Slovak, Slovenian, Spanish, Swedish, Thai, Turkish, Ukrainian, Uyghur
jperkin
pushed a commit
that referenced
this issue
Feb 21, 2022
0.6.0.1 * Ensure that position evaluates false inside bibliography (#99). 0.6 * Add Term parameter to TagTerm [API change]. * Add TagPrefix, TagSuffix constructors to Tag [API change]. * Make sure that extracted AuthorOnly names have the correct formatting (#55). * Do case-insensitive sorting, like Zotero (#91). * Ignore "ibid" entries in computing ambiguities. * Improved disambiguation for author-in-text citations. * In disambiguating, convert author-in-text to normal citations. Otherwise we disambiguate incorrectly. * Fix title disambiguation with note style (#90). Previously we'd been calculating ambiguities by generating renderings for citation items independently of context. This meant that we didn't detect ambiguities in "subsequent" citations (which might e.g. just have an author). * Ensure we don't do collapsing of items across a prefix or suffix (#89). If we have [@doe99; for contrasting views see @smith33; @doe00], we don't want to get collapsing to (Doe 1999, 2000; for contrasting views, see Smith 1933). This isn't strictly by the spec, but it gives better results. * Allow collapsing after an initial prefix. 0.5 * Add linkBibliography field to CiteprocOptions [API change]. When this is set to True, we hyperlink bibliography entries according to the draft of the CSL v1.02 spec (Appendix VI). When an entry has a DOI, PMCID, PMID, or URL available but none of these are rendered by the style, add a link to the title (or, if no title is present, the whole entry), using the URL for the DOI, PMCID, PMID, or URL (in that order of priority). (Benjamin Bray, #88.) * In generating citation labels, only use issued date. Not, for example, accessed (#80). * Citeproc.Locale: export lookupQuotes. [API change] * Citeproc.Types: Add localizeQuotes method to CiteprocOutput class [API change]. * Citeproc.CslJson, Citeproc.Pandoc: Implement localizeQuotes. * Citeproc: apply localizeQuotes after rendering. This ensures that quotes are properly localized and flipflopped. Previously this was done in renderCslJson (for CSL JSON) and in pandoc (for Pandoc Inlines). It is more consistent to do this as part of the rendering pipeline, in citeproc itself. * Citeproc.CslJson: Drop the Locale parameter from the signature of renderCslJson [breaking API change]. It was only needed for quote localization, which now occurs outside of this function. * Citeproc.Pandoc: use a Span with class csl-quoted for quotes, rather than a Quoted inline. This way we can leave Quoted elements passed in by pandoc alone, and we won't get strange effects like the one described in #87 (where " behaves differently when in a citation suffix). * Default to Shifted with icu flag (#83). This makes the library behave similarly whether compiled with icu or with the default unicode-collation and prevents test failures with icu. * Require recent text-icu with icu flag. Older versions don't build with newer versions of icu4c. * Support links in CslJson (Benjamin Bray). Currently they are only supported in rendering, not parsing (in support of #88). * Allow test cases to specify CiteprocOptions (Benjamin Bray). * Update locales from upstream. * Add new CSL tests to repository. 0.4.1 * Change Pandoc inNote so it creates a Span with class csl-note rather than a Note. This should make it easier to integrate citations with ordinary notes in pandoc. * Do not hyperlink author-only citations (#77). If we do this we get two consecutive hyperlinks for author-in-text forms. * movePunctuationInsideQuotes: only move , and ., not ? and !, as per the CSL spec. 0.4.0.1 * Fix bug introduced by the fix to #61 (#74). In certain circumstances, we could get doubled "et al.". * Depend on unicode-collation unconditionally (#71). It is necessary even when text-icu is used, because of Text.Collate.Lang. * Rename tests in extra/ so they fall into categories. 0.4 * We now use Lang from unicode-collation rather than defining our own. The type constructor has changed, as has the signature of parseLang. * Use unicode-collation by default for more accurate sorting. * text-icu will still be used if the icu flag is set. This may give better performance, at the cost of depending on a large C library. * Change type of SortKeyValue so it doesn't embed Lang. [API change] Instead, we now store a language-specific collator in the Eval Context. * Move compSortKeyValues from Types to Eval. * Add curly open quote to word splitters in normalizeSortKey. * Improve date sorting: use the format YYYY0000 if no month, day, and YYYYMM00 if no day when generating sort keys. * Special treatment of literal "others" as last name in a list (#61). When we convert bibtex/biblatex bibliographies, the form "and others" yields a last name with nameLiteral = "others". We detect this and generate a localized "and others" (et al). * Make abbreviations case-insensitive (#45).
jperkin
pushed a commit
that referenced
this issue
Apr 24, 2022
0.13.1
fix: improved shell completion for URLs by @danielgtaylor in #95
fix: simplify option handling, send explicitly passed defaults by @danielgtaylor in #96
0.13.0
feat: cache parsed/loaded APIs for faster access by @danielgtaylor in #83
fix: sending non-structured-object input via stdin, fixes #81 by @danielgtaylor in #84
fix: better handling of params with unknown types, fixes #63 by @danielgtaylor in #85
fix: trim trailing slashes from OpenAPI servers by @danielgtaylor in #86
fix: custom server usage, fixes #54 by @danielgtaylor in #87
feat: enabled & document raw mode for saving files by @danielgtaylor in #88
fix: parameter serialization for style: form, fixes #47 by @danielgtaylor in #89
fix: handle recursive schemas without crashing, fixes #21 by @danielgtaylor in #90
feat: add api sync command by @danielgtaylor in #91
feat: update dependencies by @danielgtaylor in #92
fix: simplify edit resource command code by @danielgtaylor in #93
fix: panic when multiple configured APIs have the same base URL by @danielgtaylor in #94
0.12.0
b8773c1 Merge pull request #82 from danielgtaylor/completion
b600019 feat: add auth-header command
b9d6da4 feat: completion of URI templates
b0b14ed feat: dynamic shell completion for OpenAPI operations
593acaf fix: utilize existing API loading for completion
jperkin
pushed a commit
that referenced
this issue
Aug 2, 2022
[0.8.1] - 2022-07-12
Bug Fixes
Set fail-fast strategy to false
Miscellaneous Tasks
Update windows runners to windows-2022
[0.8.0] - 2022-07-12
Bug Fixes
Update lychee arguments to skip checking protonmail
Documentation
Clarify that --tag argument can be an unexisting tag
Switch chronological and topological (#99)
Features
Support external commands for commit preprocessors (#86)
Support changing commit scope with commit_parsers (#94)
[breaking] Pass footer token and separator to template (#97)
Miscellaneous Tasks
Set MSRV to 1.58.1 (#87)
Update tera to 1.16.0 (#70)
Disable building arm64 docker images temporarily
Upgrade dependencies
Refactor
Apply clippy suggestions
Apply clippy suggestions
gco
pushed a commit
to gco/pkgsrc
that referenced
this issue
Sep 11, 2022
3.0.27 (2022-06-08) Merged Pull Requests * Update chefstyle requirement from 1.2.1 to 1.3.2 TritonDataCenter#84 (dependabot-preview[bot]) * Update chefstyle requirement from 1.3.2 to 1.4.0 TritonDataCenter#85 (dependabot-preview[bot]) * Update chefstyle requirement from 1.4.0 to 1.4.2 TritonDataCenter#86 (dependabot-preview[bot]) * Update chefstyle requirement from 1.4.2 to 1.4.3 TritonDataCenter#87 (dependabot-preview[bot]) * Update chefstyle requirement from 1.4.3 to 1.4.5 TritonDataCenter#89 (dependabot-preview[bot]) * Update chefstyle requirement from 1.4.5 to 1.5.0 TritonDataCenter#90 (dependabot-preview[bot]) * Update chefstyle requirement from 1.5.0 to 1.5.2 TritonDataCenter#92 (dependabot-preview[bot]) * Update chefstyle requirement from 1.5.2 to 1.5.8 TritonDataCenter#96 (dependabot-preview[bot]) * Update chefstyle requirement from 1.5.8 to 1.5.9 TritonDataCenter#97 (dependabot-preview[bot]) * Remove parallel pin now that it supports Ruby 2.4 again TritonDataCenter#98 (tas50) * Add Ruby 2.7 testing + cache gem installs in CI TritonDataCenter#99 (tas50) * Update chefstyle requirement from 1.5.9 to 1.6.2 TritonDataCenter#101 (dependabot-preview[bot]) * Update chefstyle requirement from 1.6.2 to 1.7.1 TritonDataCenter#102 (dependabot-preview[bot]) * Update chefstyle requirement from 1.7.1 to 1.7.2 TritonDataCenter#104 (dependabot-preview[bot]) * Update chefstyle requirement from 1.7.2 to 1.7.5 TritonDataCenter#106 (dependabot-preview[bot]) * Upgrade to GitHub-native Dependabot TritonDataCenter#107 (dependabot-preview[bot]) * add ruby tests 3.0 and 3.1 in verify pipeline TritonDataCenter#109 (jayashrig158) * Fix in nested_hash parsing in config TritonDataCenter#115 (Nik08)
jperkin
pushed a commit
that referenced
this issue
Sep 17, 2022
1.56.4
Bug Fixes
require python 3.7+ (#119) (507b58d)
1.56.3
Bug Fixes
deps: allow protobuf < 5.0.0 (#112) (67b0231)
Documentation
fix changelog header to consistent size (#108) (d315b9f)
1.56.2
Bug Fixes
deps: require grpcio >= 1.0.0, <2.0.0dev (4a402ce)
deps: require protobuf>= 3.15.0, <4.0.0dev (#105) (4a402ce)
1.56.1
Bug Fixes
deps: require protobuf >=1.15.0 (f04ed64)
include tests directory (#103) (72e5df1)
regenerate pb2 files using the latest version of grpcio-tools (f04ed64)
1.56.0
Features
add google/api/error_reason.proto (62c04b8)
add google/api/visibility.proto (62c04b8)
add google/type/decimal.proto (62c04b8)
add google/type/interval.proto (62c04b8)
add google/type/localized_text.proto (62c04b8)
add google/type/phone_number.proto (62c04b8)
update all protos and pb2 files (62c04b8)
Bug Fixes
expose all names in longrunning _pb2's (#90) (09e9ccd)
re-generate pb2 files (#87) (6260547)
re-generate pb2 files using grpcio-tools<1.44.0 (#93) (76bb9f6)
remove deprecated fields aliases and features from google/api/endpoint.proto (62c04b8)
1.55.0
Features
add location proto files. (#84) (9a33e56)
1.54.0
Features
add extended_operations.proto (#77) (bc85849)
add google/api/routing.proto (#75) (1ae0bbc)
jperkin
pushed a commit
that referenced
this issue
Nov 28, 2022
Summary of Changes: ------------------- . Significant performance improvements to CLCLE, CUSE, TRE, TRTE, TRTR and TRTRE instructions (#498, #500, #510, #513, #519, #520) (Thank you James Wekel!) . Fix minor bug in STSTU (Search String Unicode) instruction . Fix minor bug in CMPSC (Compression Call) instruction . Fix minor bug in PFPO (Perform Floating-Point Operation) instruction (#407) . PER 1 GRA (General Register Alteration) support (#87) . z/VM TXF PER support (i.e. TXSUSPEND = Event Suppression) . PER SKEY support . PER Zero-Address Detection support . BEAR-Enhancement Facility support . Decimal Floating-Point Packed Conversion Facility support (#496) . Report and ignore oversized LCS outbound SNA messages . Ensure same serial number on all multi-file images (#276) . Fix minor dasdinit negative size parameter bug (#472) . Fix minor dasd CCW data-chaining bug . Improve CCKD handling of unusual/unexpected errors . Minor corrections to CTCE documentation . dasdls: sort display by by dataset name . Various minor cckdmap enhancements . Fix rare bug in .HET locate block logic (#518) . Disable CCKD automatic garbage collection (#504) . Fix hang at exit when MLVL DEBUG is active . Fix bug causing DASD corruption with s+ tracing . Fix 'numcpu' handling bug causing crash (#481) . Ensure error message when no config file provided (#483) . Fix another possible Windows suspend/resume crash (#489) . Customized Offerings Driver (COD) support . New SYSGPORT config file statement (#505) . Various improvements to Linux build scripts (#454, #461) . Many other various minor miscellaneous fixes and improvements to both documentation and code
jperkin
pushed a commit
that referenced
this issue
Mar 19, 2023
v1.0.0 What's Changed - fix: hardcoded Berlin in geolocation by @andylizi in #87 - fix: alignment of rendered elements - alignment of Dew Point cell - improve length calculations for cjk languages v1.0.0-rc.1 What's Changed - Fix config directory creation failure by @brandondong in #82 v1.0.0-rc What's Changed - feat: weekday forcasts #75 - fix: time_indicator disable option #76 - fix: daytime icons in graph #77 - fix border displacement with other precip. units than probability 0473b20 - feat: historical weather #78
jperkin
pushed a commit
that referenced
this issue
Apr 8, 2023
[1.6.0] - 2023-03-20 What's Changed - Add NetBSD instructions by @0323pin in #77 - Add repology badge by @jubalh in #76 - fix issue where level wasn't being read from config by @solidiquis in #78 - add scoop manifest by @fawni in #80 - default to num logical cpus rather than 4 threads by @solidiquis in #81 - Add support for generating shell completions by @Brezak in #82 - Fix miscoloration of directories that have extension by @fawni in #83 - [Optimization] - Upgraded heap-based tree data structure to an index-tree by @solidiquis in #86 - Replace tempdir crate with tempfile crate by @Brezak in #87 - fix issue where ansi escapes were being printed raw on windows by @solidiquis in #90
jperkin
pushed a commit
that referenced
this issue
Apr 8, 2023
[1.1.2] - 2023-03-18
- Added new translations of the GUI, bringing the total number of supported
languages to 8!
- German 🇩🇪 (#87)
- Simplified Chinese 🇨🇳 (#89 - #93)
- Ukrainian 🇺🇦 (#94)
- Added keyboard shortcuts to make the whole experience more enjoyable and
efficient: check out issue #97 to see all the available hotkeys or to
suggest new ones!
- Changed GUI font to sarasa-gothic-mono to support the introduction of
Simplified Chinese language
- Minor improvements to Overview page proportions and paddings
jperkin
pushed a commit
that referenced
this issue
May 5, 2023
1.3.0
add command-line options "-g", "-u", "-p" by @jschauma in #97
1.2.0
Add support for redis-sentinel by @acteru in #95
advertise new kind of supported cache by @acteru in #96
1.1.5
Warn about overriding DANE by @oh2fih in #92
Fix tests by @Snawoot in #93
1.1.4
docs: Fix a few typos by @timgates42 in #87
fix tests by @Snawoot in #88
allow unicode requests by @Snawoot in #91
jperkin
pushed a commit
that referenced
this issue
Jul 10, 2023
Features/Improvements ✨ - Append suffix to download filenames to avoid overwrites (#35) - Support uploading image attachments from clipboard (#36) - Support leaving rooms (#45) - Support hiding server part of username in message scrollback (#71) - Restore opened tabs and windows upon restart (#72) - Interpret newlines as line breaks when converting Markdown to HTML (#74) - Indicate when you're editing a message (#75) - Support configuring which program :open runs (#95) - Support sending and completing Emoji shortcodes in the message bar (#100) - Indicate number of members in room (#110) - Show errors fetching space hierarchy when list is empty (#113) - Show Git SHA information when printing version information (#120) - Reduce number of Tokio workers (#129) - Indicate when there are new messages below scrollback viewport (#131) Bug Fixes 🐞 - Tab completion panics for unrecognized commands (#81) - Fix error message for undefined download directory (#87) - Gracefully handle verification events that are unknown locally (#90) - Use terminal window focus to determine when a message has actually been seen (#94) - ChatStore::set_receipts locks up app for bad connections (#99) - Need fallback behaviour when dirs::download_dir returns None (#118) - Code blocks get rendered without line breaks (#122) - Remove trailing newlines in body (#125) - Profile session token should only be readable by the user (#130) - Handle sync failure after successful password entry (#133) Documentation/README Updates 📚 - Add manual pages (#88) - Mention Minimum Supported Rust Version in README (#115) - Link to AUR pkg in README (#121) Meta 👷♀️ - Update locked Cargo dependencies (#70) - Add Nix flake (#73) - Add FUNDING.yml to project (#77) - Upload artifacts built in GitHub Actions (#105) - Cache build directory in GitHub Actions (#107) - Replace GitHub actions using deprecated features (#114) - Fix Nix flake build on Darwin (#117)
jperkin
pushed a commit
that referenced
this issue
Jul 10, 2023
jperkin
pushed a commit
that referenced
this issue
Dec 18, 2023
15.0.0 (2022-01-04) Added * [Ruby,JavaScript,Go] Add bigdecimal, biginteger parameter types (#42) * [.NET] Implementation of Cucumber Expressions by porting the Java parser (#1743) * [Python] Added Python Cucumber Expressions (#65) Changed * [Go] Parameters of type {float} are now parsed as float32 (previously it was float64). Use {double} if you need float64. (#42) 15.0.1 (2022-01-04) Fixed * Fixed release scripts 15.0.2 (2022-03-15) Fixed * Add missing name field in CommonJS package file (#87) 15.1.0 (2022-04-21) Added * [JavaScript] Add CucumberExpression.ast and expose the AST types. 15.1.1 (2022-04-21) Fixed * [JavaScript] Make CucumberExpression.ast public (it was accidentally private in 15.1.0) 15.2.0 (2022-05-24) Added * [JavaScript] Add ParameterInfo (#124) Fixed * [.NET] Fix casing in "word" parameter type constant 16.0.0 (2022-06-12) Changed * [JavaScript] The ParameterType constructor's regexps parameter has a new type: type Regexps = StringOrRegExp | readonly StringOrRegExp[]; type StringOrRegExp = string | RegExp. 16.0.1 (2022-11-06) Fixed * [JavaScript] The ParameterType constructor's transform, useForSnippets and preferForRegexpMatch should be optional. (#178) 16.1.0 - 2022-11-28 Added * [Java] Enabled reproducible builds * [JavaScript] Added ParameterType.builtin. This is to allow JSON serialization of only the non-builtin parameter types. 16.1.1 - 2022-12-08 Fixed * [Java] Improve expression creation performance (#187, #189) 16.1.2 (2023-01-17) Fixed * [Java] Improve cucumber expression creation performance (#202) 17.0.0 (2023-10-06) Changed * [JavaScript] Added TypeScript source to the package (#211) * [Ruby] Minimum supported ruby is now 2.5+ (#232) * [Ruby] Large suite wide refactor for basic rubocop compliance (#233 #235) * [Ruby] Expose ParameterType#transformer as a new public reader (#234) * [Ruby] Remove ParameterType#prefer_for_regexp_match? and ParameterType#use_for_snippets? -> Use their standard reader equivalents instead (Remove the ?) (#234) 17.0.1 (2023-11-24) Fixed * [JavaScript] Fix import paths lacking file suffix (#243) * [Ruby] Fixed up Layout rubocop autofixes
jperkin
pushed a commit
that referenced
this issue
Jan 9, 2024
jperkin
pushed a commit
that referenced
this issue
Feb 7, 2024
1.3.3 (2023-12-28) What's Changed * Correctly pass through flags rb_process_status_wait. by @ioquatix in #81 * Ensure that the saved node is freed correctly if an exception occurs. by @ioquatix in #84 1.4.0 (2023-12-28) What's Changed * Ruby 3.3 updates (dropped support for Ruby 3.0) by @ioquatix in #85 1.4.1 (2024-01-10) * Add liburing package installation for Ubuntu tests. (#87) * Also fix #88: -std=c99 is disabling struct timespec * Always #include <ruby.h> before any system header (#89) 1.4.2 (2024-01-14) * No change except version.
jperkin
pushed a commit
that referenced
this issue
Feb 9, 2024
2.78.1 (stable): Glib: * Dispatcher: Allow destroy during emit (Kjell Ahlstedt) Issue #116 (PBS) gmmproc: * h2def.py: Make return types that are unsigned work. Required by gtkmm4, GdkDmabufTextureBuilder (Kjell Ahlstedt) Build: * Meson build: Don't fail if warning_level=everything (Daniel Boles, Kjell Ahlstedt) Merge request gtkmm!87 * MSVC, NMake: Make dep paths configurable (Chun-wei Fan) 2.78.0 (stable): Glib: * ustring: Add a std::hash<> specialization Not included by #include <glibmm.h>. Activate with #include <glibmm/ustring_hash.h>. (Kjell Ahlstedt) Issue #16 (Murray Cumming), merge request !61 2.77.0 (unstable): Glib, Gio: * Use callback functions with C linkage (Kjell Ahlstedt) Issue #1 (Murray Cumming) Glib: * Add create_variant() (Kjell Ahlstedt) Issue #109 (ilya-fedin) * Add VariantBase::get_dynamic() (Kjell Ahlstedt) Issue #110 (ilya-fedin) * Variant: Provide Variant<long long> whenever possible (Kjell Ahlstedt) Issue #111 (ilya-fedin) * VariantContainerBase: Add a const version of get_child() and deprecate the non-const version (Kjell Ahlstedt) Issue #112 (ilya-fedin) * Add DBusHandle and Variant<DBusHandle> (Kjell Ahlstedt) Issue #113 (ilya-fedin) * ustring: Add truncate_middle() (Kjell Ahlstedt) Gio: * Add Subprocess and SubprocessLauncher (Kjell Ahlstedt) Issue #106 (ilya-fedin) * Resolver: Add set/get/property_timeout() (Kjell Ahlstedt) Documentation: * Gio::File: Fix various spelling errors (Daniel Boles) * Remove AUTHORS and README.SUN; add info to README.md (Kjell Ahlstedt) Issue gtkmm#140 gmmproc: * Generate callback functions with C linkage (Kjell Ahlstedt) Issue #1 (Murray Cumming) Examples: * Add subprocess example (Kjell Ahlstedt) Issue #106 (ilya-fedin) Tests: * Giomm tests: Test for /etc/passwd instead of /etc/fstab (Jeremy Bicha) Merge request !60 Build: * Require glib-2.0 >= 2.77.0 * Autotools build: Don't include config.h in ustring.cc (Kjell Ahlstedt) 2.76.0 (stable): Glib: * Dispatcher: Don't warn when a Dispatcher is deleted while messages are pending. (Kjell Ahlstedt) Issue #108 (PBS) * Dispatcher: Add const versions of emit() and operator()() and deprecate the non-const versions. (Kjell Ahlstedt) Issue #103 (PBS) Gio: * ListModel: Add get_typed_object() (Kjell Ahlstedt) See issue gtkmm#132 2.75.0 (unstable): Glib: * Module: Deprecate build_path() * Binding: Fix the bind_property() with two transformation functions * Add the GLIBMM_CHECK_VERSION() preprocessor macro (Kjell Ahlstedt) Gio: * NetworkMonitor::get_default(): Add refreturn (Kjell Ahlstedt) Issue #104 (ilya-fedin) * AppInfo: Add get_[recommended|fallback]_for_type() (Kjell Ahlstedt) Issue #105 (ilya-fedin) * Add BytesIcon (Kjell Ahlstedt) Issue #107 (ilya-fedin) * ListStore: Rename a local variable (Chun-wei Fan) Merge request !59 * Settings: Add bind() with mapping functions and unbind() (Kjell Ahlstedt) Documentation: * Glib::Binding::unbind(): Fix documentation (Kjell Ahlstedt) gmmproc: * generate_wrap_init.pl.in: Disable warning C4273 on Visual Studio (Chun-wei Fan) Merge request !57 Tests: * Fix giomm_simple test on Windows (Chun-wei Fan) Merge request !58 Meson build: * Detect if we build from a git subtree (William Roy) Merge request gtkmm!72 (Kjell Ahlstedt) Issue gtkmm#131 (William Roy) * Don't copy files with configure_file() (Kjell Ahlstedt) 2.74.0 (stable): Gio: * ListStore: Add find() * File: Add create_tmp() (Kjell Ahlstedt) Documentation: * File: Document create_for_parse_name() (Kjell Ahlstedt) 2.73.2 (unstable): Glib: * ustring: Add release() (Kjell Ahlstedt) Issue #101 (PBS) Gio: * ListStore: Don't derive a gtkmm__GListStore GType (Kjell Ahlstedt) Issue glib#2661 * DBus::Proxy: get_connection(), get_interface_info(): Add refreturn (Kjell Ahlstedt) Issue #102 (우정모) * AppInfo: Add get_default_for_type_async/finish(), get_default_for_uri_scheme_async/finish() * File: Add make_symbolic_link_async/finish() * ListStore: Add property_n_items() * Resolver: Add lookup_by_name_with_flags(), lookup_by_name_with_flags_async/finish() (Kjell Ahlstedt) Documentation: * Glib::RefPtr: Improve the documentation (Kjell Ahlstedt) Issue gtkmm#119 (David Marceau) * Gio::Action: Improve the documentation (Kjell Ahlstedt) Issue #100 (Diederik van Lierop) gmmproc: * Improved handling of final types (Kjell Ahlstedt) Issue glib#2661 * Improve handling of gi-docgen syntax in C documentation (Kjell Ahlstedt) Build: * Meson build: Avoid unnecessary configuration warnings (Kjell Ahlstedt) * Meson/MSVC: Add more warnings to ignore (Chun-wei Fan) * NMake Makefiles: Ensure g[lib|io]mm[config.h|.rc] are created (Chun-wei Fan) Issue #99 (Martin Ammermüller) * Require glib-2.0 >= 2.73.2 (Kjell Ahlstedt) 2.72.1 (stable): Glib: * ustring_Iterator: Don't declare copy constructor =default. A fix in the 2.72.0 release broke ABI. (Kjell Ahlstedt) Issue #98 (Scotty Trees) 2.72.0 (stable): Glib: * MainContext: Add create(MainContextFlags flags) (Kjell Ahlstedt) Gio: * Add AppInfoMonitor (Kjell Ahlstedt, technic93) Issue #97 * DBus::Proxy: signal_signal() accepts a signal name * File: Add move_async() and move_finish() * SocketClient: Deprecate set/get/property_tls_validation_flags() * TlsCertificate: Add properties private_key, private_key_pem, pkcs11_uri, private_key_pkcs11_uri. Fix the create*() methods. * TlsClientConnection.hg: Deprecate set/get/property_validation_flags() (Kjell Ahlstedt) gmmproc: * Add "ignore_deprecations" argument in _WRAP_METHOD() (Kjell Ahlstedt) Build: * Require glib-2.0 >= 2.71.2 (Kjell Ahlstedt) * MSVC build: Support VS2022 builds (Chun-wei Fan) * Meson build: Specify 'check' option in run_command() Require Meson >= 0.55.0 (Kjell Ahlstedt) 2.70.0 (stable): Glib: * Timer: Add resume() and is_active() (Kjell Ahlstedt) Issue #87 (chamignoom) * Add the Environ class (Kjell Ahlstedt) Issue #89 (Alexander Shaduri) * Binding: Add dup_source(), dup_target(). Deprecate get_source(), get_target(). TimeZone: Add operator bool(), create_identifier(). Deprecate create(). (Kjell Ahlstedt) Gio: * FileInfo: Add get/set_access_date(), get/set_creation_date(). Notification: Add set_category(). TlsCertificate: Add property/get_not_valid_before(), property/get_not_valid_after(), property/get_subject_name(), property/get_issuer_name(). TlsConnection: Add property/get_protocol_version(), property/get_ciphersuite_name(). (Kjell Ahlstedt) Tests: * Add test of Glib::Environ (Kjell Ahlstedt) Issue #89 (Alexander Shaduri) gmmproc: * Handle gi-docgen syntax in C documentation (Kjell Ahlstedt) Build: * Require glib-2.0 >= 2.69.1 (Kjell Ahlstedt) 2.68.2 (stable): Glib: * Replace all g_quark_from_static_string() by g_quark_from_string() (Kjell Ahlstedt) Issue #96 (小太) Gio: * FileEnumerator: Remove refreturn to avoid memory leak (talisein) Merge request !53 * ListModel::get_object(): Make it work for interface classes (Kjell Ahlstedt) Issue #93 (pumkinpal) * AppInfo::get_all(): Avoid a crash on Windows (Kjell Ahlstedt) Issue #94 (Lawrence37) Build: * MSVC build: Remove extraneous GLIBMM_API in Glib::ustring (Kjell Ahlstedt) Issue #92 (Christoph Reiter)
jperkin
pushed a commit
that referenced
this issue
Feb 20, 2024
pkgsrc changes:
- adapt to various upstream changes
- update for newer version of pjproject
- add unconditional depeendency on SDL
- remove pktccops and mgcp option (has to do with supporting cable headends)
- remove various 64-bit time_t fixes as upstream is finally doing these
[asterisk-announce] asterisk release 18.21.0
The Asterisk Development Team would like to announce
the release of asterisk-18.21.0.
This release resolves issues reported by the community
and would have not been possible without your participation.
Thank You!
Change Log for Release asterisk-18.21.0
========================================
Summary:
----------------------------------------
- logger: Fix linking regression.
- Revert "core & res_pjsip: Improve topology change handling."
- menuselect: Use more specific error message.
- res_pjsip_nat: Fix potential use of uninitialized transport details
- app_if: Fix faulty EndIf branching.
- manager.c: Fix regression due to using wrong free function.
- config_options.c: Fix truncation of option descriptions.
- manager.c: Improve clarity of "manager show connected".
- make_xml_documentation: Really collect LOCAL_MOD_SUBDIRS documentation.
- general: Fix broken links.
- MergeApproved.yml: Remove unneeded concurrency
- app_dial: Add option "j" to preserve initial stream topology of caller
- ast_coredumper: Increase reliability
- logger.c: Move LOG_GROUP documentation to dedicated XML file.
- res_odbc.c: Allow concurrent access to request odbc connections
- res_pjsip_header_funcs.c: Check URI parameter length before copying.
- config.c: Log #exec include failures.
- make_xml_documentation: Properly handle absolute LOCAL_MOD_SUBDIRS.
- app_voicemail.c: Completely resequence mailbox folders.
- sig_analog: Fix channel leak when mwimonitor is enabled.
- res_rtp_asterisk.c: Update for OpenSSL 3+.
- alembic: Update list of TLS methods available on ps_transports.
- func_channel: Expose previously unsettable options.
- app.c: Allow ampersands in playback lists to be escaped.
- uri.c: Simplify ast_uri_make_host_with_port()
- func_curl.c: Remove CURLOPT() plaintext documentation.
- res_http_websocket.c: Set hostname on client for certificate validation.
- live_ast: Add astcachedir to generated asterisk.conf.
- SECURITY.md: Update with correct documentation URL
- func_lock: Add missing see-also refs to documentation.
- app_followme.c: Grab reference on nativeformats before using it
- configs: Improve documentation for bandwidth in iax.conf.
- logger: Add channel-based filtering.
- chan_iax2.c: Don't send unsanitized data to the logger.
- codec_ilbc: Disable system ilbc if version >= 3.0.0
- resource_channels.c: Explicit codec request when creating UnicastRTP.
- doc: Update IP Quality of Service links.
- chan_pjsip: Add PJSIPHangup dialplan app and manager action
- chan_iax2.c: Ensure all IEs are displayed when dumping frame contents.
- chan_dahdi: Warn if nonexistent cadence is requested.
- stasis: Update the snapshot after setting the redirect
- ari: Provide the caller ID RDNIS for the channels
- main/utils: Implement ast_get_tid() for OpenBSD
- res_rtp_asterisk.c: Fix runtime issue with LibreSSL
- app_directory: Add ADSI support to Directory.
- core_local: Fix local channel parsing with slashes.
- Remove files that are no longer updated
- app_voicemail: Add AMI event for mailbox PIN changes.
- app_queue.c: Emit unpause reason with PauseQueueMember event.
- bridge_simple: Suppress unchanged topology change requests
- res_pjsip: Include cipher limit in config error message.
- res_speech: allow speech to translate input channel
- res_rtp_asterisk.c: Fix memory leak in ephemeral certificate creation.
- res_pjsip_dtmf_info.c: Add 'INFO' to Allow header.
- api.wiki.mustache: Fix indentation in generated markdown
- pjsip_configuration.c: Disable DTLS renegotiation if WebRTC is enabled.
- configs: Fix typo in pjsip.conf.sample.
- res_pjsip_exten_state,res_pjsip_mwi: Allow unload on shutdown
- res_pjsip: Expanding PJSIP endpoint ID and relevant resource length to 255 characters
- .github: PRSubmitActions: Fix adding reviewers to PR
- .github: New PR Submit workflows
- .github: New PR Submit workflows
- res_stasis: signal when new command is queued
- ari/stasis: Indicate progress before playback on a bridge
- func_curl.c: Ensure channel is locked when manipulating datastores.
- .github: Fix job prereqs in PROpenedUpdated
- .github: Block PR tests until approved
- logger.h: Add ability to change the prefix on SCOPE_TRACE output
- Add libjwt to third-party
- res_pjsip: update qualify_timeout documentation with DNS note
- chan_dahdi: Clarify scope of callgroup/pickupgroup.
- func_json: Fix crashes for some types
- res_speech_aeap: add aeap error handling
- app_voicemail: Disable ADSI if unavailable.
- codec_builtin: Use multiples of 20 for maximum_ms
- lock.c: Separate DETECT_DEADLOCKS from DEBUG_THREADS
- asterisk.c: Use the euid's home directory to read/write cli history
- res_pjsip_transport_websocket: Prevent transport from being destroyed before message finishes.
- cel: add publish user event helper
- chan_console: Fix deadlock caused by unclean thread exit.
- file.c: Add ability to search custom dir for sounds
- chan_iax2: Improve authentication debugging.
- res_rtp_asterisk: fix wrong counter management in ioqueue objects
- make_buildopts_h, et. al. Allow adding all cflags to buildopts.h
- func_periodic_hook: Add hangup step to avoid timeout
- res_stasis_recording.c: Save recording state when unmuted.
- res_speech_aeap: check for null format on response
- func_periodic_hook: Don't truncate channel name
- safe_asterisk: Change directory permissions to 755
- chan_rtp: Implement RTP glue for UnicastRTP channels
- app_queue: periodic announcement configurable start time.
- variables: Add additional variable dialplan functions.
- Restore CHANGES and UPGRADE.txt to allow cherry-picks to work
User Notes:
----------------------------------------
- ### app_dial: Add option "j" to preserve initial stream topology of caller
The option "j" is now available for the Dial application which
uses the initial stream topology of the caller to create the outgoing
channels.
- ### logger: Add channel-based filtering.
The console log can now be filtered by
channels or groups of channels, using the
logger filter CLI commands.
- ### chan_pjsip: Add PJSIPHangup dialplan app and manager action
A new dialplan app PJSIPHangup and AMI action allows you
to hang up an unanswered incoming PJSIP call with a specific SIP
response code in the 400 -> 699 range.
- ### app_voicemail: Add AMI event for mailbox PIN changes.
The VoicemailPasswordChange event is
now emitted whenever a mailbox password is updated,
containing the mailbox information and the new
password.
Resolves: #398
- ### res_speech: allow speech to translate input channel
res_speech now supports translation of an input channel
to a format supported by the speech provider, provided a translation
path is available between the source format and provider capabilites.
- ### res_pjsip: Expanding PJSIP endpoint ID and relevant resource length to 255 characters
With this update, the PJSIP realm lengths have been extended
to support up to 255 characters.
- ### res_stasis: signal when new command is queued
Call setup times should be significantly improved
when using ARI.
- ### lock.c: Separate DETECT_DEADLOCKS from DEBUG_THREADS
You no longer need to select DEBUG_THREADS to use
DETECT_DEADLOCKS. This removes a significant amount of overhead
if you just want to detect possible deadlocks vs needing full
lock tracing.
- ### file.c: Add ability to search custom dir for sounds
A new option "sounds_search_custom_dir" has been added to
asterisk.conf that allows asterisk to search
AST_DATA_DIR/sounds/custom for sounds files before searching the
standard AST_DATA_DIR/sounds/<lang> directory.
- ### make_buildopts_h, et. al. Allow adding all cflags to buildopts.h
The "Build Options" entry in the "core show settings"
CLI command has been renamed to "ABI related Build Options" and
a new entry named "All Build Options" has been added that shows
both breaking and non-breaking options.
- ### chan_rtp: Implement RTP glue for UnicastRTP channels
The dial string option 'g' was added to the UnicastRTP channel
which enables RTP glue and therefore native RTP bridges with those
channels.
- ### app_queue: periodic announcement configurable start time.
Introduce a new queue configuration option called
'periodic-announce-startdelay' which will vary the normal (historic)
behavior of starting the periodic announcement cycle at
periodic-announce-frequency seconds after entering the queue to start
the periodic announcement cycle at period-announce-startdelay seconds
after joining the queue. The default behavior if this config option is
not set remains unchanged.
Signed-off-by: Jaco Kroon <jaco at uls.co.za>
- ### variables: Add additional variable dialplan functions.
Four new dialplan functions have been added.
GLOBAL_DELETE and DELETE have been added which allows
the deletion of global and channel variables.
GLOBAL_EXISTS and VARIABLE_EXISTS have been added
which checks whether a global or channel variable has
been set.
Upgrade Notes:
----------------------------------------
- ### app.c: Allow ampersands in playback lists to be escaped.
Ampersands in URLs passed to the `Playback()`,
`Background()`, `SpeechBackground()`, `Read()`, `Authenticate()`, or
`Queue()` applications as filename arguments can now be escaped by
single quoting the filename. Additionally, this is also possible when
using the `CONFBRIDGE` dialplan function, or configuring various
features in `confbridge.conf` and `queues.conf`.
- ### pjsip_configuration.c: Disable DTLS renegotiation if WebRTC is enabled.
The dtls_rekey will be disabled if webrtc support is
requested on an endpoint. A warning will also be emitted.
- ### res_pjsip: Expanding PJSIP endpoint ID and relevant resource length to 255 characters
As part of this update, the maximum allowable length
for PJSIP endpoints and relevant resources has been increased from
40 to 255 characters. To take advantage of this enhancement, it is
recommended to run the necessary procedures (e.g., Alembic) to
update your schemas.
[asterisk-announce] asterisk release 18.20.2
The Asterisk Development Team would like to announce
the release of asterisk-18.20.2.
This release resolves issues reported by the community
and would have not been possible without your participation.
Thank You!
Change Log for Release asterisk-18.20.2
========================================
Summary:
----------------------------------------
- res_rtp_asterisk: Fix regression issues with DTLS client check
[asterisk-announce] asterisk release 18.20.1
The Asterisk Development Team would like to announce security release
Asterisk 18.20.1.
The following security advisories were resolved in this release:
- [Path traversal via AMI GetConfig allows access to outside files](https://github.com/asterisk/asterisk/s
ecurity/advisories/GHSA-8857-hfmw-vg8f)
- [Asterisk susceptible to Denial of Service via DTLS Hello packets during call initiation](https://github
.com/asterisk/asterisk/security/advisories/GHSA-hxj9-xwr8-w8pq)
- [PJSIP logging allows attacker to inject fake Asterisk log entries ](https://github.com/asterisk/asteris
k/security/advisories/GHSA-5743-x3p5-3rg7)
- [PJSIP_HEADER dialplan function can overwrite memory/cause crash when using 'update'](https://github.com
/asterisk/asterisk/security/advisories/GHSA-98rc-4j27-74hh)
Change Log for Release asterisk-18.20.1
========================================
Summary:
----------------------------------------
- res_pjsip_header_funcs: Duplicate new header value, don't copy.
- res_pjsip: disable raw bad packet logging
- res_rtp_asterisk.c: Check DTLS packets against ICE candidate list
- manager.c: Prevent path traversal with GetConfig.
[asterisk-announce] asterisk release 18.20.0
The Asterisk Development Team would like to announce
the release of asterisk-18.20.0.
This release resolves issues reported by the community
and would have not been possible without your participation.
Thank You!
Change Log for Release asterisk-18.20.0
========================================
Summary:
----------------------------------------
- ari-stubs: Fix more local anchor references
- ari-stubs: Fix more local anchor references
- ari-stubs: Fix broken documentation anchors
- res_pjsip_session: Send Session Interval too small response
- .github: Update workflow-application-token-action to v2
- app_dial: Fix infinite loop when sending digits.
- app_voicemail: Fix for loop declarations
- alembic: Fix quoting of the 100rel column
- pbx.c: Fix gcc 12 compiler warning.
- app_audiosocket: Fixed timeout with -1 to avoid busy loop.
- download_externals: Fix a few version related issues
- main/refer.c: Fix double free in refer_data_destructor + potential leak
- sig_analog: Add Called Subscriber Held capability.
- app_macro: Fix locking around datastore access
- Revert "app_stack: Print proper exit location for PBXless channels."
- .github: Use generic releaser
- install_prereq: Fix dependency install on aarch64.
- res_pjsip.c: Set contact_user on incoming call local Contact header
- extconfig: Allow explicit DB result set ordering to be disabled.
- rest-api: Run make ari-stubs
- res_pjsip_header_funcs: Make prefix argument optional.
- pjproject_bundled: Increase PJSIP_MAX_MODULE to 38
- manager: Tolerate stasis messages with no channel snapshot.
- core/ari/pjsip: Add refer mechanism
- chan_dahdi: Allow autoreoriginating after hangup.
- audiohook: Unlock channel in mute if no audiohooks present.
- sig_analog: Allow three-way flash to time out to silence.
- res_prometheus: Do not generate broken metrics
- res_pjsip: Enable TLS v1.3 if present.
- func_cut: Add example to documentation.
- extensions.conf.sample: Remove reference to missing context.
- func_export: Use correct function argument as variable name.
- app_queue: Add support for applying caller priority change immediately.
- .github: Fix cherry-pick reminder issues
- chan_iax2.c: Avoid crash with IAX2 switch support.
- res_geolocation: Ensure required 'location_info' is present.
- Adds manager actions to allow move/remove/forward individual
messages in a particular mailbox folder. The forward command can
be used to copy a message within a mailbox or to another mailbox.
Also adds a VoicemailBoxSummarry, required to retrieve message ID's.
- app_voicemail: add CLI commands for message manipulation
- res_rtp_asterisk: Move ast_rtp_rtcp_report_alloc using
`rtp->themssrc_valid` into the scope of the rtp_i nstance lock.
- .github: Minor tweak to Asterisk Releaser
- .github: Suppress cherry-pick reminder for some situations
- sig_analog: Allow immediate fake ring to be suppressed.
User Notes:
----------------------------------------
- ### sig_analog: Add Called Subscriber Held capability.
Called Subscriber Held is now supported for analog
FXS channels, using the calledsubscriberheld option. This allows
a station user to go on hook when receiving an incoming call
and resume from another phone on the same line by going on hook,
without disconnecting the call.
- ### res_pjsip_header_funcs: Make prefix argument optional.
The prefix argument to PJSIP_HEADERS is now
optional. If not specified, all header names will be
returned.
- ### core/ari/pjsip: Add refer mechanism
There is a new ARI endpoint `/endpoints/refer` for referring
an endpoint to some URI or endpoint.
- ### chan_dahdi: Allow autoreoriginating after hangup.
The autoreoriginate setting now allows for kewlstart FXS
channels to automatically reoriginate and provide dial tone to the
user again after all calls on the line have cleared. This saves users
from having to manually hang up and pick up the receiver again before
making another call.
- ### sig_analog: Allow three-way flash to time out to silence.
The threewaysilenthold option now allows the three-way
dial tone to time out to silence, rather than continuing forever.
- ### res_pjsip: Enable TLS v1.3 if present.
res_pjsip now allows TLS v1.3 to be enabled if supported by
the underlying PJSIP library. The bundled version of PJSIP supports
TLS v1.3.
- ### app_queue: Add support for applying caller priority change immediately.
The 'queue priority caller' CLI command and
'QueueChangePriorityCaller' AMI action now have an 'immediate'
argument which allows the caller priority change to be reflected
immediately, causing the position of a caller to move within the
queue depending on the priorities of the other callers.
- ### Adds manager actions to allow move/remove/forward individual
messages in a particular mailbox folder. The forward command
can be used to copy a message within a mailbox or to another
mailbox. Also adds a Vo icemailBoxSummarry, required to retrieve
message ID's.
The following manager actions have been added
VoicemailBoxSummary - Generate message list for a given mailbox
VoicemailRemove - Remove a message from a mailbox folder
VoicemailMove - Move a message from one folder to another within a mailbox
VoicemailForward - Copy a message from one folder in one mailbox
to another folder in another or the same mailbox.
- ### app_voicemail: add CLI commands for message manipulation
The following CLI commands have been added to app_voicemail
voicemail show mailbox <mailbox> <context>
Show contents of mailbox <mailbox>@<context>
voicemail remove <mailbox> <context> <from_folder> <messageid>
Remove message <messageid> from <from_folder> in mailbox <mailbox>@<context>
voicemail move <mailbox> <context> <from_folder> <messageid> <to_folder>
Move message <messageid> in mailbox <mailbox>&<context> from <from_folder> to <to_folder>
voicemail forward <from_mailbox> <from_context> <from_folder>
<messageid> <to_mailbox> <to_context> <to_ folder>
Forward message <messageid> in mailbox <mailbox>@<context> <from_folder> to
mailbox <mailbox>@<context> <to_folder>
- ### sig_analog: Allow immediate fake ring to be suppressed.
The immediatering option can now be set to no to suppress
the fake audible ringback provided when immediate=yes on FXS channels.
[asterisk-announce] Asterisk Release 18.19.0
The Asterisk Development Team would like to announce
the release of Asterisk 18.19.0.
This release resolves issues reported by the community
and would have not been possible without your participation.
Thank You!
Change Log for Release 18.19.0
========================================
Summary:
----------------------------------------
- app.h: Move declaration of ast_getdata_result before its first use
- doc: Remove obsolete CHANGES-staging and UPGRADE-staging
- .github: Updates for AsteriskReleaser
- app_voicemail: fix imap compilation errors
- res_musiconhold: avoid moh state access on unlocked chan
- utils: add lock timestamps for DEBUG_THREADS
- .github: Back out triggering PROpenedOrUpdated by label
- .github: Move publish docs to new file CreateDocs.yml
- rest-api: Updates for new documentation site
- .github: Remove result check from PROpenUpdateGateTests
- .github: Fix use of 'contains'
- .github: Add recheck label test to additional jobs
- .github: Fix recheck label typos
- .github: Fix recheck label manipulation
- .github: Allow PR submit checks to be re-run by label
- app_voicemail_imap: Fix message count when IMAP server is unavailable
- res_pjsip_rfc3326: Prefer Q.850 cause code over SIP.
- res_pjsip_session: Added new function calls to avoid ABI issues.
- app_queue: Add force_longest_waiting_caller option.
- pjsip_transport_events.c: Use %zu printf specifier for size_t.
- res_crypto.c: Gracefully handle potential key filename truncation.
- configure: Remove obsolete and deprecated constructs.
- res_fax_spandsp.c: Clean up a spaces/tabs issue
- ast-db-manage: Synchronize revisions between comments and code.
- test_statis_endpoints: Fix channel_messages test again
- res_crypto.c: Avoid using the non-portable ALLPERMS macro.
- tcptls: when disabling a server port, we should set the accept_fd to -1.
- AMI: Add parking position parameter to Park action
- test_stasis_endpoints.c: Make channel_messages more stable
- build: Fix a few gcc 13 issues
- .github: Rework for merge approval
- ast-db-manage: Fix alembic branching error caused by #122.
- app_followme: fix issue with enable_callee_prompt=no (#88)
- sounds: Update download URL to use HTTPS.
- configure: Makefile downloader enable follow redirects.
- res_musiconhold: Add option to loop last file.
- chan_dahdi: Fix Caller ID presentation for FXO ports.
- AMI: Add CoreShowChannelMap action.
- sig_analog: Add fuller Caller ID support.
- res_stasis.c: Add new type 'sdp_label' for bridge creation.
- app_queue: Preserve reason for realtime queues
- .github: Fix issues with cherry-pick-reminder
- indications: logging changes
- .github Ignore error when adding reviewrs to PR
- .github: Update field descriptions for AsteriskReleaser
- callerid: Allow specifying timezone for date/time.
- chan_pjsip: Allow topology/session refreshes in early media state
- chan_dahdi: Fix broken hidecallerid setting.
- .github: Change title of AsteriskReleaser job
- asterisk.c: Fix option warning for remote console.
- .github: Don't add cherry-pick reminder if it's already present
- .github: Fix quoting in PROpenedOrUpdated
- .github: Add cherry-pick reminder to new PRs
- configure: fix test code to match gethostbyname_r prototype.
- res_pjsip_pubsub.c: Use pjsip version for pending NOTIFY check. (#76)
- res_sorcery_memory_cache.c: Fix memory leak
- xml.c: Process XML Inclusions recursively.
- .github: Tweak improvement issue type language.
- .github: Tweak new feature language, and move feature requests elsewhere.
- .github: Fix staleness check to only run on certain labels.
User Notes:
----------------------------------------
- ### AMI: Add parking position parameter to Park action
New ParkingSpace parameter has been added to AMI action Park.
- ### res_musiconhold: Add option to loop last file.
The loop_last option in musiconhold.conf now
allows the last file in the directory to be looped once reached.
- ### AMI: Add CoreShowChannelMap action.
New AMI action CoreShowChannelMap has been added.
- ### sig_analog: Add fuller Caller ID support.
Additional Caller ID properties are now supported on
incoming calls to FXS stations, namely the
redirecting reason and call qualifier.
- ### res_stasis.c: Add new type 'sdp_label' for bridge creation.
When creating a bridge using the ARI the 'type' argument now
accepts a new value 'sdp_label' which will configure the bridge to add
labels for each stream in the SDP with the corresponding channel id.
- ### app_queue: Preserve reason for realtime queues
Make paused reason in realtime queues persist an
Asterisk restart. This was fixed for non-realtime
queues in ASTERISK_25732.
Upgrade Notes:
----------------------------------------
- ### app_queue: Preserve reason for realtime queues
Add a new column to the queue_member table:
reason_paused VARCHAR(80) so the reason can be preserved.
Closed Issues:
----------------------------------------
- #45: [bug]: Non-bundled PJSIP check for evsub pending NOTIFY check is insufficient/ineffective
- #55: [bug]: res_sorcery_memory_cache: Memory leak when calling sorcery_memory_cache_open
- #64: [bug]: app_voicemail_imap wrong behavior when losing IMAP connection
- #65: [bug]: heap overflow by default at startup
- #66: [improvement]: Fix preserve reason of pause when Asterisk is restared for realtime queues
- #73: [new-feature]: pjsip: Allow topology/session refreshes in early media state
- #87: [bug]: app_followme: Setting enable_callee_prompt=no breaks timeout
- #89: [improvement]: indications: logging changes
- #91: [improvement]: Add parameter on ARI bridge create to allow it to send SDP labels
- #94: [new-feature]: sig_analog: Add full Caller ID support for incoming calls
- #98: [new-feature]: callerid: Allow timezone to be specified at runtime
- #100: [bug]: sig_analog: hidecallerid setting is broken
- #102: [bug]: Strange warning - 'T' option is not compatible with remote console mode and has no effect
.
- #104: [improvement]: Add AMI action to get a list of connected channels
- #108: [new-feature]: fair handling of calls in multi-queue scenarios
- #110: [improvement]: utils - add lock timing information with DEBUG_THREADS
- #116: [bug]: SIP Reason: "Call completed elsewhere" no longer propagating
- #120: [bug]: chan_dahdi: Fix broken presentation for FXO caller ID
- #122: [new-feature]: res_musiconhold: Add looplast option
- #133: [bug]: unlock channel after moh state access
- #136: [bug]: Makefile downloader does not follow redirects.
- #145: [bug]: ABI issue with pjproject and pjsip_inv_session
- #155: [bug]: GCC 13 is catching a few new trivial issues
- #158: [bug]: test_stasis_endpoints.c: Unit test channel_messages is unstable
- #174: [bug]: app_voicemail imap compile errors
- #200: [bug]: Regression: In app.h an enum is used before its declaration.
[asterisk-announce] Asterisk Release 18.18.1
The Asterisk Development Team would like to announce security release
Asterisk 18.18.1.
The following security advisories were resolved in this release:
https://github.com/asterisk/asterisk/security/advisories/GHSA-4xjp-22g4-9fxm
Change Log for Release 18.18.1
========================================
Summary:
----------------------------------------
- apply_patches: Use globbing instead of file/sort.
- apply_patches: Sort patch list before applying
- pjsip: Upgrade bundled version to pjproject 2.13.1
User Notes:
----------------------------------------
- ### res_http_media_cache: Introduce options and customize
The res_http_media_cache module now attempts to load
configuration from the res_http_media_cache.conf file.
The following options were added:
* timeout_secs
* user_agent
* follow_location
* max_redirects
* protocols
* redirect_protocols
* dns_cache_timeout_secs
- ### format_sln: add .slin as supported file extension
format_sln now recognizes '.slin' as a valid
file extension in addition to the existing
'.sln' and '.raw'.
- ### bridge_builtin_features: add beep via touch variable
Add optional touch variable : TOUCH_MIXMONITOR_BEEP(interval)
Setting TOUCH_MIXMONITOR_BEEP/TOUCH_MONITOR_BEEP to a valid
interval in seconds will result in a periodic beep being
played to the monitored channel upon MixMontior/Monitor
feature start.
If an interval less than 5 seconds is specified, the interval
will default to 5 seconds. If the value is set to an invalid
interval, the default of 15 seconds will be used.
- ### app_senddtmf: Add SendFlash AMI action.
The SendFlash AMI action now allows sending
a hook flash event on a channel.
- ### res_mixmonitor: MixMonitorMute by MixMonitor ID
It is now possible to specify the MixMonitorID when calling
the manager action: MixMonitorMute. This will allow an
individual MixMonitor instance to be muted via ID.
The MixMonitorID can be stored as a channel variable using
the 'i' MixMonitor option and is returned upon creation if
this option is used.
As part of this change, if no MixMonitorID is specified in
the manager action MixMonitorMute, Asterisk will set the mute
flag on all MixMonitor audiohooks on the channel. Previous
behavior would set the flag on the first MixMonitor audiohook
found.
- ### pbx_dundi: Add PJSIP support.
DUNDi now supports chan_pjsip. Outgoing calls using
PJSIP require the pjsip_outgoing_endpoint option
to be set in dundi.conf.
- ### test.c: Fix counting of tests and add 2 new tests
The "tests" attribute of the "testsuite" element in the
output XML now reflects only the tests actually requested
to be executed instead of all the tests registered.
The "failures" attribute was added to the "testsuite"
element.
Also added two new unit tests that just pass and fail
to be used for testing CI itself.
- ### cli: increase channel column width
This change increases the display width on 'core show channels'
amd 'core show channels verbose'
For 'core show channels', the Channel name field is increased to
64 characters and the Location name field is increased to 32
characters.
For 'core show channels verbose', the Channel name field is
increased to 80 characters, the Context is increased to 24
characters and the Extension is increased to 24 characters.
Upgrade Notes:
----------------------------------------
Closed Issues:
----------------------------------------
- #193: [bug]: third-party/apply-patches doesn't sort the patch file list before applying
[asterisk-announce] Asterisk Release 18.18.0
The Asterisk Development Team would like to announce
the release of Asterisk 18.18.0.
This release resolves issues reported by the community
and would have not been possible without your participation.
Thank You!
Change Log for Release 18.18.0
========================================
Summary:
----------------------------------------
- Set up new ChangeLogs directory
- .github: Add AsteriskReleaser
- chan_pjsip: also return all codecs on empty re-INVITE for late offers
- cel: add local optimization begin event
- core: Cleanup gerrit and JIRA references. (#40)
- .github: Fix CherryPickTest to only run when it should
- .github: Fix reference to CHERRY_PICK_TESTING_IN_PROGRESS
- .github: Remove separate set labels step from new PR
- .github: Refactor CP progress and add new PR test progress
- res_pjsip: mediasec: Add Security-Client headers after 401
- .github: Add cherry-pick test progress labels
- LICENSE: Update link to trademark policy.
- chan_dahdi: Add dialmode option for FXS lines. (#36)
- .github: Update issue templates
- .github: Remove unnecessary parameter in CherryPickTest
- Initial GitHub PRs
- Initial GitHub Issue Templates
- pbx_dundi: Fix PJSIP endpoint configuration check.
- Revert "app_queue: periodic announcement configurable start time."
- pbx_dundi: Add PJSIP support.
- res_pjsip_stir_shaken: Fix JSON field ordering and disallowed TN characters.
- install_prereq: Add Linux Mint support.
- chan_pjsip: fix music on hold continues after INVITE with replaces
- voicemail.conf: Fix incorrect comment about #include.
- app_queue: Fix minor xmldoc duplication and vagueness.
- test.c: Fix counting of tests and add 2 new tests
- loader.c: Minor module key check simplification.
- ael: Regenerate lexers and parsers.
- res_calendar: output busy state as part of show calendar.
- bridge_builtin_features: add beep via touch variable
- res_mixmonitor: MixMonitorMute by MixMonitor ID
- format_sln: add .slin as supported file extension
- app_queue: periodic announcement configurable start time.
- func_json: Fix JSON parsing issues.
- app_dial: Fix DTMF not relayed to caller on unanswered calls.
- make_version: Strip svn stuff and suppress ref HEAD errors
- configure: fix detection of re-entrant resolver functions
- cli: increase channel column width
- res_agi: RECORD FILE plays 2 beeps.
- app_senddtmf: Add SendFlash AMI action.
- contrib: rc.archlinux.asterisk uses invalid redirect.
- main/iostream.c: fix build with libressl
- res_http_media_cache: Introduce options and customize
User Notes:
----------------------------------------
- ### cel: add local optimization begin event
The new AST_CEL_LOCAL_OPTIMIZE_BEGIN can be used
by itself or in conert with the existing
AST_CEL_LOCAL_OPTIMIZE to book-end local channel optimizaion.
- ### chan_dahdi: Add dialmode option for FXS lines. (#36)
A "dialmode" option has been added which allows
specifying, on a per-channel basis, what methods of
subscriber dialing (pulse and/or tone) are permitted.
Additionally, this can be changed on a channel
at any point during a call using the CHANNEL
function.
- ### pbx_dundi: Add PJSIP support.
DUNDi now supports chan_pjsip. Outgoing calls using
PJSIP require the pjsip_outgoing_endpoint option
to be set in dundi.conf.
- ### cli: increase channel column width
This change increases the display width on 'core show channels'
amd 'core show channels verbose'
For 'core show channels', the Channel name field is increased to
64 characters and the Location name field is increased to 32
characters.
For 'core show channels verbose', the Channel name field is
increased to 80 characters, the Context is increased to 24
characters and the Extension is increased to 24 characters.
- ### app_senddtmf: Add SendFlash AMI action.
The SendFlash AMI action now allows sending
a hook flash event on a channel.
- ### res_http_media_cache: Introduce options and customize
The res_http_media_cache module now attempts to load
configuration from the res_http_media_cache.conf file.
The following options were added:
* timeout_secs
* user_agent
* follow_location
* max_redirects
* protocols
* redirect_protocols
* dns_cache_timeout_secs
- ### test.c: Fix counting of tests and add 2 new tests
The "tests" attribute of the "testsuite" element in the
output XML now reflects only the tests actually requested
to be executed instead of all the tests registered.
The "failures" attribute was added to the "testsuite"
element.
Also added two new unit tests that just pass and fail
to be used for testing CI itself.
- ### res_mixmonitor: MixMonitorMute by MixMonitor ID
It is now possible to specify the MixMonitorID when calling
the manager action: MixMonitorMute. This will allow an
individual MixMonitor instance to be muted via ID.
The MixMonitorID can be stored as a channel variable using
the 'i' MixMonitor option and is returned upon creation if
this option is used.
As part of this change, if no MixMonitorID is specified in
the manager action MixMonitorMute, Asterisk will set the mute
flag on all MixMonitor audiohooks on the channel. Previous
behavior would set the flag on the first MixMonitor audiohook
found.
- ### bridge_builtin_features: add beep via touch variable
Add optional touch variable : TOUCH_MIXMONITOR_BEEP(interval)
Setting TOUCH_MIXMONITOR_BEEP/TOUCH_MONITOR_BEEP to a valid
interval in seconds will result in a periodic beep being
played to the monitored channel upon MixMontior/Monitor
feature start.
If an interval less than 5 seconds is specified, the interval
will default to 5 seconds. If the value is set to an invalid
interval, the default of 15 seconds will be used.
- ### format_sln: add .slin as supported file extension
format_sln now recognizes '.slin' as a valid
file extension in addition to the existing
'.sln' and '.raw'.
Upgrade Notes:
----------------------------------------
- ### cel: add local optimization begin event
The existing AST_CEL_LOCAL_OPTIMIZE can continue
to be used as-is and the AST_CEL_LOCAL_OPTIMIZE_BEGIN event
can be ignored if desired.
Closed Issues:
----------------------------------------
- #35: [New Feature]: chan_dahdi: Allow disabling pulse or tone dialing
- #39: [Bug]: Remove .gitreview from repository.
- #43: [Bug]: Link to trademark policy is no longer correct
- #48: [bug]: res_pjsip: Mediasec requires different headers on 401 response
- #52: [improvement]: Add local optimization begin cel event
### For more details, see:
https://downloads.asterisk.org/pub/telephony/asterisk/releases/ChangeLog-18.18.0.md
[asterisk-announce] Asterisk 18.17.1 Now Available
The Asterisk Development Team would like to announce the release of Asterisk 18.17.1.
The release of Asterisk 18.17.1 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!
The following issues are resolved in this release:
Bugs fixed in this release:
-----------------------------------
* ASTERISK-30469 - res_pjsip_pubsub: Regression for
subscription shutdowns
(Reported by N A)
* ASTERISK-30472 - pbx_ael: Literal usage for variables broken
(Reported by isrl)
For a full list of changes in this release, please see the ChangeLog:
https://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-18.17.1
Thank you for your continued support of Asterisk!
[asterisk-announce] Asterisk 18.17.0 Now Available
The Asterisk Development Team would like to announce the release of Asterisk 18.17.0.
The release of Asterisk 18.17.0 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!
The following issues are resolved in this release:
New Features made in this release:
-----------------------------------
* ASTERISK-29810 - app_signal: Add channel signaling
applications
(Reported by N A)
* ASTERISK-30262 - res_pjsip_session: Allow a context to be
specified for overlap dialing
(Reported by N A)
* ASTERISK-30319 - Add BYE Reason support for SIP
(Reported by Igor Goncharovsky)
* ASTERISK-30180 - app_broadcast: Add a channel audio
multicasting application
(Reported by N A)
Bugs fixed in this release:
-----------------------------------
* ASTERISK-27830 - Asterisk crashes on Invalid UTF-8 string
(Reported by AvayaXAsterisk)
* ASTERISK-30354 - chan_iax2: Lack of formats prior to
receiving voice frames causes jitterbuffer to stall
(Reported by N A)
* ASTERISK-30162 - when chan_iax is used to relay calls, no
ringing indication is played
(Reported by Jaco Kroon)
* ASTERISK-30424 - pjproject_bundled: cross-compilation broken
when ssl autodetected
(Reported by Nick French)
* ASTERISK-30388 - res_phoneprov: Stale SERVER variable when
multi-homed
(Reported by cmaj)
* ASTERISK-30419 - pjsip: Crash when sending NOTIFY in PJSIP 2.13
(Reported by Ross Beer)
* ASTERISK-30417 - Copy/Paste error in UnpauseQueueMember
(Reported by Sean Bright)
* ASTERISK-30406 - pbx_ael: Global variables are not expanded.
(Reported by Sean Bright)
* ASTERISK-29604 - ari: Segfault with lots of calls
(Reported by Danila Evgrafov)
* ASTERISK-30391 - res_rtp_asterisk: Issue with transcoding
g722 after MES changes
(Reported by George Joseph)
* ASTERISK-30345 - loader.c: Modules that decline to load
cannot be reloaded
(Reported by N A)
* ASTERISK-30379 - http: fix NULL pointer dereference while
enable_status on TLS-only
(Reported by Boris P. Korzun)
* ASTERISK-30375 - res_http_media_cache: Crash when URL has no
path component.
(Reported by Sean Bright)
* ASTERISK-30351 - manager: Originate variables are not added
when setvar used in manager.conf
(Reported by Sebastian
Gutierrez)
* ASTERISK-30369 - res_pjsip: Websockets from same IP shut down
when they shouldn't be
(Reported by Joshua C. Colp)
* ASTERISK-30367 - pbx: Fix outdated channel snapshots with pbx_exec
(Reported by N A)
* ASTERISK-28767 - chan_pjsip: Caller ID not used when checking
for extension, callerid supplement executed too late
(Reported by Oleg)
* ASTERISK-30350 - res_pjsip_sdp_rtp: rtp_timeout_hold is not
used when moh_passthrough has call on hold
(Reported by Benjamin Keith Ford)
* ASTERISK-30240 - app voicemail odbc build error with gcc 11.1
(Reported by Michael Bradeen)
* ASTERISK-30100 - res_pjsip: Path is ignored on INVITE to endpoint
(Reported by Yury Kirsanov)
* ASTERISK-30198 - Error `Too many open files` occurs after
about ~8000 calls when using mixmonitor
(Reported by Julien Alie)
Improvements made in this release:
-----------------------------------
* ASTERISK-30411 - app_read: add option to include terminating
digit on empty, terminated strings
(Reported by Michael Bradeen)
* ASTERISK-30405 - app_directory: Add 's' option to skip
channel call
(Reported by Michael Bradeen)
* ASTERISK-30422 - app_senddtmf: add the option for senddtmf to answer
(Reported by Michael Bradeen)
* ASTERISK-30325 - Upgrade Asterisk to bundled pjproject 2.13
(Reported by Stanislav Abramenkov)
* ASTERISK-30404 - app_directory: Add reading directory
configuration from custom file
(Reported by Michael Bradeen)
* ASTERISK-29913 - func_json: Adds multi-level and array
parsing to JSON_DECODE
(Reported by N A)
* ASTERISK-30353 - func_frame_trace: Print text for text frames
(Reported by N A)
* ASTERISK-30361 - json.h: Add missing
ast_json_object_real_get
(Reported by N A)
* ASTERISK-30280 - Create capability to assign a Media
Experience Score to RTP streams
(Reported by George Joseph)
* ASTERISK-30332 - func_callerid: Warn if invalid redirecting
reason provided
(Reported by N A)
For a full list of changes in this release, please see the ChangeLog:
https://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-18.17.0
Thank you for your continued support of Asterisk!
[asterisk-announce] Asterisk 16.29.1, 18.15.1, 19.7.1, 20.0.1 Now Available
The Asterisk Development Team would like to announce the release of
Asterisk 16.29.1, 18.15.1, 19.7.1, and 20.0.1.
The release of Asterisk 16.29.1, 18.15.1, 19.7.1, and 20.0.1 resolves issues reported by the
community and would have not been possible without your participation.Thank you!
The following issue is resolved in this release:
Bugs fixed in this release:
-----------------------
[ASTERISK-30103 <https://issues.asterisk.org/jira/browse/ASTERISK-30103>]
chan_ooh323 vulnerability in calling/called party IE (Reported By: Michael
Bradeen)
[ASTERISK-30176 <https://issues.asterisk.org/jira/browse/ASTERISK-30176>]
GetConfig can read files outside of Asterisk (Reported By: shawty)
[ASTERISK-30244 <https://issues.asterisk.org/jira/browse/ASTERISK-30244>]
Occasional crash when TCP/TLS connection terminated and subscription
persistence is removed (Reported By: nappsoft)
[ASTERISK-30338 <https://issues.asterisk.org/jira/browse/ASTERISK-30338>]
Backport 2.13 security fixes from pjproject
[asterisk-announce] Asterisk 18.15.0 Now Available
The Asterisk Development Team would like to announce the release of Asterisk 18.15.0.
The release of Asterisk 18.15.0 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!
The following issues are resolved in this release:
New Features made in this release:
-----------------------------------
* ASTERISK-30037 - Add test support to calling external processes
(Reported by Philip Prindeville)
* ASTERISK-30161 - locks: add AMI event for deadlock
(Reported by N A)
* ASTERISK-30211 - app_confbridge: Add end_marked_any option
(Reported by N A)
* ASTERISK-30186 - res_pjsip: Add support for reloading TLS
certificate and key information
(Reported by Joshua C. Colp)
* ASTERISK-29899 - features: Add advanced transfer initiation options
(Reported by N A)
Bugs fixed in this release:
-----------------------------------
* ASTERISK-30235 - res_crypto and tests: Memory issues and and
uninitialized variable error
(Reported by George Joseph)
* ASTERISK-30234 - res_geolocation: ...may be used
uninitialized error in geoloc_config.c
(Reported by George Joseph)
* ASTERISK-30215 - Inbound SIP INVITE with Geo Location causing
a Segmentation Fault
(Reported by Dan Cropp)
* ASTERISK-30135 - [res_musiconhold] Allows the moh only for
the answered call
(Reported by sungtae kim)
* ASTERISK-26894 - pjsip should support tel uri scheme
(Reported by Gergely D½½ms½½di)
* ASTERISK-30210 - func_frame_trace: Channel masquerade
triggers assertion
(Reported by N A)
* ASTERISK-30190 - res_geolocation: GEOLOC_PROFILE isn't
returning correct values on incoming channel
(Reported by George Joseph)
* ASTERISK-29185 - chan_pjsip: Endpoint: allow = all is broken.
(Reported by Alexander Traud)
* ASTERISK-30192 - res_tonedetect: fix typo for frametype
(Reported by N A)
* ASTERISK-29453 - alembic: incoming_call_offer_pref and
outgoing_call_offer_pref missing in "ps_endpoints" table
(Reported by Daniel Th½½men)
* ASTERISK-26826 - testsuite: Add support for Python 3
(Reported by Joshua C. Colp)
* ASTERISK-30167 - res_geolocation: Refactor for issues found
by users
(Reported by George Joseph)
* ASTERISK-28422 - Memory Leak in Confbridge menu
(Reported by Ted G)
* ASTERISK-29917 - ami: FilterList action doesn't exist
(Reported by N A)
* ASTERISK-30018 - app_meetme: MeetmeList AMI event not documented
(Reported by Michael Cargile)
* ASTERISK-30020 - ConfbridgeListRooms Event Not Documented
(Reported by Michael Cargile)
* ASTERISK-30151 - Documentation doesn't include info about
"field", a 3rd required parameter.
(Reported by Chris Young)
Improvements made in this release:
-----------------------------------
* ASTERISK-30241 - res_pjsip_gelocation: Downgrade some NOTICE
scope trace debugs to DEBUG level
(Reported by N A)
* ASTERISK-30178 - extend user_eq_phone behavior to local uri's
(Reported by Michael Bradeen)
* ASTERISK-30046 - Reimplement res/res_crypto.c internals with
EVP_PKEY interface to Openssl API's
(Reported by Philip Prindeville)
* ASTERISK-30045 - Add test coverage to res/res_crypto.c functionality
(Reported by Philip Prindeville)
* ASTERISK-30185 - res_geolocation: Allow location parameters
to be specified in profiles
(Reported by George Joseph)
* ASTERISK-30177 - res_geolocation: Add option to suppress
empty elements
(Reported by George Joseph)
* ASTERISK-30182 - res_geolocation: Add built-in profiles to
use in fully dynamic configurations
(Reported by George Joseph)
* ASTERISK-29906 - [patch] update RLS to reflect the changes to
the lists
(Reported by Alexei Gradinari)
* ASTERISK-30163 - general: fix minor formatting issues
(Reported by N A)
* ASTERISK-30164 - chan_iax2: Add missing option documentation
(Reported by N A)
* ASTERISK-30153 - logger: Improve log levels
(Reported by N A)
* ASTERISK-30160 - cdr.conf: Remove obsolete app_mysql reference
(Reported by N A)
* ASTERISK-30159 - general: Remove obsolete SVN references
(Reported by N A)
[asterisk-announce] Asterisk 18.14.0 Now Available
The Asterisk Development Team would like to announce the release of Asterisk 18.14.0.
The release of Asterisk 18.14.0 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!
The following issues are resolved in this release:
Improvements made in this release:
-----------------------------------
* ASTERISK-30128 - Create PJSIP interface module for Geolocation
(Reported by George Joseph)
* ASTERISK-30127 - Create core Geolocation capability for Asterisk
(Reported by George Joseph)
* ASTERISK-30089 - general: fix typos
(Reported by N A)
* ASTERISK-30050 - Upgrade Asterisk to bundled pjproject 2.12.1
(Reported by Stanislav Abramenkov)
Bugs fixed in this release:
-----------------------------------
* ASTERISK-30167 - res_geolocation: Refactor for issues found
by users
(Reported by George Joseph)
* ASTERISK-29966 - pbx_variables: ast_str_strlen can be wrong
(Reported by N A)
* ASTERISK-29905 - OSX: bininstall launchd issue on
cross-platfrom build
(Reported by Sergey V. Lobanov)
* ASTERISK-30137 - manager: Global disabled event filtered is incomplete
(Reported by N A)
* ASTERISK-30109 - res_pjsip: no contact-status AMI event on
register of prune-on-boot contact that uses the same URI as
before Asterisk restart
(Reported by Michael Neuhauser)
* ASTERISK-29991 - chan_dahdi, callerid: Caller ID does not
honor presentation
(Reported by N A)
* ASTERISK-30126 - Spelling mistake in
configs/samples/queues.conf.sample
(Reported by Sam Banks)
* ASTERISK-30029 - build: Git security vulnerability fix is sad
with our accessing git as root during "make install"
(Reported by Joshua C. Colp)
* ASTERISK-29907 - res_pjsip, app_confbridge: Video call
through ConfBridge with normal endpoints causes infinite
loop/crash
(Reported by N A)
* ASTERISK-30138 - Compile failure in
res_geolocation/geoloc_eprofile.c when optimization is enabled
(Reported by George Joseph)
* ASTERISK-30096 - cel_odbc: Column type 9 (field
'cdr:cel:eventtime') is unsupported at this time
(Reported by Morvai Szabolcs)
* ASTERISK-30083 - chan_iax2: Optional dependency on
openssl/res_crypto is now mandatory
(Reported by Dmitry Melekhov)
* ASTERISK-30099 - test_aeap_transport: transport_connect_fail
sporadically causes failure
(Reported by Kevin Harwell)
* ASTERISK-30123 - features: Update automixmon documentation to
reflect reality
(Reported by Trevor Peirce)
* ASTERISK-30117 - pbx_lua: Remove compiler warnings
(Reported by Boris P. Korzun)
* ASTERISK-30101 - res_prometheus: Optional load
res_pjsip_outbound_registration.so
(Reported by Boris P. Korzun)
* ASTERISK-29989 - app_dial, chan_dahdi: DIALSTATUS is
inconsistent for busy
(Reported by N A)
* ASTERISK-30001 - db: Removing nonexistent entries shows
"Database entry removed"
(Reported by N A)
* ASTERISK-30115 - app_dial: Allow hook flashes to propogate on
outbound dials
(Reported by N A)
* ASTERISK-30106 - res_calendar_icalendar: Microsoft online ICS
calendars no longer work
(Reported by N A)
* ASTERISK-29822 - cli: Typing \? freezes the CLI permanently
with remote console
(Reported by N A)
* ASTERISK-30072 - res_pjsip: allow TLS verification of
wildcard cert-bearing servers
(Reported by Kevin Harwell)
* ASTERISK-30075 - say: Abort if channel hangs up during playback
(Reported by N A)
New Features made in this release:
-----------------------------------
* ASTERISK-30136 - db: Add AMI action to retrieve all keys
beginning with a prefix
(Reported by N A)
* ASTERISK-30000 - chan_dahdi: Add POLARITY function
(Reported by N A)
* ASTERISK-30062 - cli: Add CLI command to execute a dialplan app
(Reported by N A)
* ASTERISK-29999 - pjsip: Get information from 200 OK INVITE
reply headers
(Reported by Jos½½ Lopes)
* ASTERISK-30061 - pbx: Add pbx helper application
(Reported by N A)
[asterisk-announce] Asterisk 18.13.0 Now Available
The Asterisk Development Team would like to announce the release of Asterisk 18.13.0.
The release of Asterisk 18.13.0 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!
The following issues are resolved in this release:
Improvements made in this release:
-----------------------------------
* ASTERISK-29906 - [patch] update RLS to reflect the changes to the lists
(Reported by Alexei Gradinari)
* ASTERISK-29891 - [patch] provide a display name for RLS subscriptions
(Reported by Alexei Gradinari)
* ASTERISK-30090 - xmldocs: Use example tags for examples
(Reported by N A)
* ASTERISK-30086 - res_parking: Warn when invalid parking space requested
(Reported by N A)
* ASTERISK-30058 - Evaluate dialplan functions and variables in agi exec
(Reported by Shloime Rosenblum)
* ASTERISK-30027 - ari: expose channel driver's unique id (i.e.
Call-ID for chan_sip/chan_pjsip) in ARI channel resource
(Reported by Moritz Fain)
* ASTERISK-29845 - res_pjsip_outbound_registration: Show time
remaining until registration lapses
(Reported by N A)
Bugs fixed in this release:
-----------------------------------
* ASTERISK-30097 - console: Recent documentation changes for
connecting to remote console are inconsistent
(Reported by Matthias Hensler)
* ASTERISK-30043 - Wrong party is disconnected when
hook-flashing on 3-way bridge
(Reported by Josh Alberts)
* ASTERISK-29603 - res_pjsip: UPDATE/re-INVITE not sent when
"timers=always" is specified in pjsip.conf
(Reported by Ray Crumrine)
* ASTERISK-30092 - DateTime application: wrong inflection for
one o'clock in German
(Reported by Christof Efkemann)
* ASTERISK-30064 - pbx: iax2 switch causes crash due to
deadlock and assertion
(Reported by N A)
* ASTERISK-29981 - res_calendar: Asterisk crashes when
starting, and will not run
(Reported by N A)
* ASTERISK-30039 - cli: Targeted debug on startup deadlocks and
creates unstable system
(Reported by N A)
* ASTERISK-30051 - res_pjsip: No video after un-hold with
moh_passthrough=yes
(Reported by Maximilian Fridrich)
* ASTERISK-24601 - [patch]Missing RFC4235 tags and attributes
in PJSIP NOTIFY event: dialog XML body
(Reported by Marco Paland)
* ASTERISK-30059 - menuselect: libxml include fails under Gentoo
(Reported by waltermoeller)
* ASTERISK-30060 - loader: format warnings in dev mode
(Reported by N A)
* ASTERISK-30065 - pjsip: Open Websocket connection is not
reused for outgoing requests
(Reported by LA)
* ASTERISK-30042 - res_pjsip_transport_websocket: Registration
over websocket returns a rewritten contact
(Reported by Thomas Guebels)
* ASTERISK-29993 - chan_dahdi: Operator control option borks
both lines involved on callee disconnect
(Reported by N A)
* ASTERISK-30044 - GCC 12 issues
(Reported by George Joseph)
New Features made in this release:
-----------------------------------
* ASTERISK-30063 - app_voicemail: Add option to prevent
deletion of messages
(Reported by N A)
* ASTERISK-29965 - res_pjsip_outbound_registration: Make max
registration delay configurable
(Reported by N A)
* ASTERISK-30087 - res_parking: Add music on hold override option
(Reported by N A)
* ASTERISK-30036 - app_confbridge: Add CONFBRIDGE_CHANNELS function
(Reported by N A)
Thank you for your continued support of Asterisk!
[asterisk-announce] Asterisk 18.12.1 Now Available
The Asterisk Development Team would like to announce the release of Asterisk 18.12.1.
The release of Asterisk 18.12.1 resolves an issue reported by the
community and would have not been possible without your participation.
Thank you!
The following issue is resolved in this release:
Bugs fixed in this release:
-----------------------------------
* ASTERISK-30065 - pjsip: Open Websocket connection is not
reused for outgoing requests
(Reported by LA)
[asterisk-announce] Asterisk 18.12.0 Now Available
The Asterisk Development Team would like to announce the release of Asterisk 18.12.0.
The release of Asterisk 18.12.0 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!
The following issues are resolved in this release:
Security bugs fixed in this release:
-----------------------------------
* ASTERISK-29476 - res_stir_shaken: Blind SSRF vulnerabilities
(Reported by Clint Ruoho)
* ASTERISK-29838 - ${SQL_ESC()} not correctly escaping a terminating \
(Reported by Leandro Dardini)
* ASTERISK-29872 - res_stir_shaken: Resource exhaustion with large files
(Reported by Benjamin Keith Ford)
New Features made in this release:
-----------------------------------
* ASTERISK-29931 - Option to allow a user to not hear the join
sound on enter but everyone else can
(Reported by Michael Cargile)
* ASTERISK-29968 - func_db: Add a function to return
cardinality of keys at prefix
(Reported by N A)
* ASTERISK-29486 - Hint-like extension value lookup function
without device state
(Reported by N A)
* ASTERISK-29941 - chan_pjsip: Add ability to send flash events
(Reported by N A)
* ASTERISK-29820 - cli: Add command to evaluate a function
(Reported by N A)
* ASTERISK-29876 - app_queue: Add music on hold option
(Reported by N A)
Bugs fixed in this release:
-----------------------------------
* ASTERISK-29655 - res_pjsip_session: No video to caller if no
camera available
(Reported by Michael Auracher)
* ASTERISK-29638 - res_pjsip_session: No video after early media
(Reported by Michael Auracher)
* ASTERISK-28518 - chan_dahdi: Caller ID FSK Erroneously Sent
when Picking Up Dahdi Call On Hold
(Reported by Josh Alberts)
* ASTERISK-29990 - chan_dahdi: adding ring cadences is not
idempotent on dahdi restart
(Reported by N A)
* ASTERISK-30007 - chan_iax2: Prevent crashes due to attempted
encryption with missing secrets
(Reported by N A)
* ASTERISK-29728 - menuselect: Disabled by default modules that
are enabled are always recompiled
(Reported by N A)
* ASTERISK-30002 - app_meetme: Don't erroneously set global
variables when channel is NULL
(Reported by N A)
* ASTERISK-29994 - chan_dahdi: Round robin array size is too
small for max number of groups
(Reported by N A)
* ASTERISK-22246 - Asterisk's "T" flag is ignored when used
with "r" or "R" flags. (documentation bug)
(Reported by Rusty Newton)
* ASTERISK-26582 - Asterisk seems to ignore the "n" parameter
for "disable console colorization"
(Reported by Sebastian Gutierrez)
* ASTERISK-29843 - Session timers get removed on UPDATE
(Reported by Mark Petersen)
* ASTERISK-29943 - file.c: seeking to negative file offset is
not prevented
(Reported by N A)
* ASTERISK-29955 - chan_sip: SIP route header is missing on UPDATE
(Reported by Mark Petersen)
* ASTERISK-29842 - Do not change 180 Ringing to 183 Progress
even if early_media already enabled
(Reported by Mark Petersen)
* ASTERISK-29948 - iostream: Infinite TCP timeout writing data
(Reported by N A)
* ASTERISK-29253 - Incorrect bridging on transfer
(Reported by Yury Kirsanov)
* ASTERISK-30006 - res_pjsip: UDP transport does not work when
async_operations is greater than 1
(Reported by Ross Beer)
* ASTERISK-30024 - Failed to sign STIR/SHAKEN payload with
functionality not enabled
(Reported by Claude Diderich)
* ASTERISK-30021 - ast_variable_list_replace_variable uses
variable with new keyword
(Reported by Jasper Hafkenscheid)
* ASTERISK-30023 - cdr_adaptive_odbc: does not support DATETIME
database columns
(Reported by Gregory Massel)
* ASTERISK-30015 - pjsip / WebRTC: Chrome creating large number
of SDP attributes
(Reported by Josh Hogan)
* ASTERISK-26689 - res_pjsip_sdp_rtp: 183 Session in Progress.
Disconnecting channel for lack of RTP activity
(Reported by Dmitriy Serov)
* ASTERISK-29929 - res_pjsip_sdp_rtp: Disconnecting channel for
lack of RTP activity in one way sessions
(Reported by Boris P. Korzun)
* ASTERISK-29411 - Crash in pjsip_msg_find_hdr_by_name
(Reported by LA)
* ASTERISK-29535 - Segmentation fault in libasteriskpj.so.2
(Reported by Daniel Bonazzi)
* ASTERISK-26719 - pbx: Only up to 127 includes in a dialplan
context (AST_PBX_MAX_STACK - 1)
(Reported by Tzafrir Cohen)
* ASTERISK-29986 - build: Asterisk 18.11.0 doesn't compile when
wget isn't available
(Reported by Stefan Ruijsenaars)
* ASTERISK-29988 - REGRESSION: The build process is requiring
xmllint or xmlstarlet ro be installed when it shouldn't
(Reported by George Joseph)
* ASTERISK-29895 - chan_iax2: Fix misaligned spacing in iax2
show netstats printout
(Reported by N A)
* ASTERISK-29939 - agi: Fix xmldoc bug with set music
(Reported by N A)
* ASTERISK-28891 - documentation: AGICommand_set+music
documentation arguments displayed incorreclty
(Reported by Jonathan Harris)
* ASTERISK-29048 - chan_iax2: "iax2 show registry" shows host
for perceived
(Reported by David Herselman)
* ASTERISK-29674 - Adjust for 64bit time_t
(Reported by Andre Heider)
* ASTERISK-29961 - RLS: domain part of 'uri' list attribute
mismatch with SUBSCRIBE request
(Reported by Alexei Gradinari)
* ASTERISK-29928 - logging messages truncated when using MUSL runtime
(Reported by Philip Prindeville)
* ASTERISK-29960 - ari: Retrieving stored recording can returns
wrong file
(Reported by Arix)
* ASTERISK-29950 - SayNumber can handle '01' to '07', but not
'08' or '09'
(Reported by Jim Van Meggelen)
Improvements made in this release:
-----------------------------------
* ASTERISK-24827 - Missing documentation for chan_dahdi dial
string ring cadences
(Reported by Scott Griepentrog)
* ASTERISK-29940 - general: Add since tags to xmldocs
(Reported by N A)
* ASTERISK-29726 - Add Asterisk External Application Protocol
(AEAP) implementation
(Reported by Kevin Harwell)
* ASTERISK-29951 - app_mf, app_sf: Return -1 on hangup
(Reported by N A)
* ASTERISK-29954 - app_meetme: Emit warning if conference not found
(Reported by N A)
* ASTERISK-29351 - Qualify pjproject 2.12 for Asterisk
(Reported by George Joseph)
* ASTERISK-29976 - Should Readme include information about
install_prereq script?
(Reported by Marcel Wagner)
* ASTERISK-29970 - Use pkg-config to find libxml2 headers and libraries
(Reported by Hugh McMaster)
* ASTERISK-29980 - build: External binary modules don't use https
(Reported by INVADE International Ltd.)
* ASTERISK-25716 - Documentation: Document explanations and
examples for possible values of DIALSTATUS
(Reported by Rusty Newton)
* ASTERISK-29967 - pbx_builtins: Add missing documentation
(Reported by N A)
[asterisk-announce] Asterisk 18.11.3 Now Available
Asterisk Development Team asteriskteam at digium.com
Tue Apr 26 12:09:50 CDT 2022
The Asterisk Development Team would like to announce the release of Asterisk 18.11.3.
The release of Asterisk 18.11.3 resolves an issue reported by the
community and would have not been possible without your participation.
Thank you!
The following issue is resolved in this release:
Bugs fixed in this release:
-----------------------------------
* ASTERISK-30024 - Failed to sign STIR/SHAKEN payload with
functionality not enabled
(Reported by Claude Diderich)
[asterisk-announce] Asterisk 16.25.2, 18.11.2, 19.3.2 and 16.8-cert14 Now Available (Security)
The Asterisk Development Team would like to announce security releases for
Asterisk 16, 18 and 19, and Certified Asterisk 16.8. The available releases are
released as versions 16.25.2, 18.11.2, 19.3.2 and 16.8-cert14.
The following security vulnerabilities were resolved in these versions:
* AST-2022-001: res_stir_shaken: resource exhaustion with large files
When using STIR/SHAKEN, it½½½s possible to download files that are not
certificates. These files could be much larger than what you would expect to
download.
* AST-2022-002: res_stir_shaken: SSRF vulnerability with Identity header
When using STIR/SHAKEN, it½½½s possible to send arbitrary requests like GET to
interfaces such as localhost using the Identity header.
* AST-2022-003: func_odbc: Possible SQL Injection
Some databases can use backslashes to escape certain characters, such as
backticks. If input is provided to func_odbc which includes backslashes it is
possible for func_odbc to construct a broken SQL query and the SQL query to
fail.
[asterisk-announce] Asterisk 18.11.1 Now Available
Asterisk Development Team asteriskteam at digium.com
Tue Mar 29 19:15:43 CDT 2022
The Asterisk Development Team would like to announce the release of Asterisk 18.11.1.
The release of Asterisk 18.11.1 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!
The following issues are resolved in this release:
Bugs fixed in this release:
-----------------------------------
* ASTERISK-29986 - build: Asterisk 18.11.0 doesn't compile when
wget isn't available
(Reported by Stefan Ruijsenaars)
* ASTERISK-29988 - REGRESSION: The build process is requiring
xmllint or xmlstarlet ro be installed when it shouldn't
(Reported by George Joseph)
[asterisk-announce] Asterisk 18.11.0 Now Available
Asterisk Development Team asteriskteam at digium.com
Thu Mar 24 09:06:03 CDT 2022
The Asterisk Development Tea…
jperkin
pushed a commit
that referenced
this issue
Apr 3, 2024
Updates - All amount fields now recognize 'k' and 'm' number suffixes as a thousand and a million allowing usage of 1k, 5m. - The initial page text layout has been updated. - The Home page now has two more rows in the Balance section highlighting daily income and expense amount. - Pressing 'v' on a selected transaction/activity will show the full transaction details. Useful in case the detail is too large. - The chart page now has the option to enable/disable TX methods from the chart on the 'space' press. - All popups have been updated and now can be scrolled using the Arrow Up or Down keys. - The Add Transaction page now shows the transaction impact as the fields are filled up. - The number animation system has been improved with reduced/minimal freezing. - All dependencies and Rust have been updated to the latest version. Changes - Recognize number suffix by @TheRustyPickle in #76 - Revamp initial page by @TheRustyPickle in #77 - Add daily income and expense rows by @TheRustyPickle in #79 - Show tx details on V key press by @TheRustyPickle in #81 - Add chart point selection by @TheRustyPickle in #83 - Add scrolling to all popup by @TheRustyPickle in #84 - Fix number suffix crash by @TheRustyPickle in #85 - Show balance change from a tx on add tx page by @TheRustyPickle in #86 - Dependency updates by @TheRustyPickle in #87 - Update version by @TheRustyPickle in #88
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Trying to install dblatex on macOS High Sierra 10.13.4 Beta aborts with
Can't locate TeXLive/TLUtils.pm.Inlining
/var/db/pkgin/pkg_install-err.log, any hints to resolve this would be appreciated.The text was updated successfully, but these errors were encountered: