Merge master.kernel.org:/home/rmk/linux-2.6-arm

Documentation/arm/memory.txt

@@ -1,7 +1,7 @@
 		Kernel Memory Layout on ARM Linux
 
 		Russell King <rmk@arm.linux.org.uk>
-			May 21, 2004 (2.6.6)
+		     November 17, 2005 (2.6.15)
 
 This document describes the virtual memory layout which the Linux
 kernel uses for ARM processors.  It indicates which regions are
@@ -37,6 +37,8 @@ ff000000	ffbfffff	Reserved for future expansion of DMA
 				mapping region.
 
 VMALLOC_END	feffffff	Free for platform use, recommended.
+				VMALLOC_END must be aligned to a 2MB
+				boundary.
 
 VMALLOC_START	VMALLOC_END-1	vmalloc() / ioremap() space.
 				Memory returned by vmalloc/ioremap will

arch/arm/kernel/armksyms.c

@@ -120,7 +120,6 @@ EXPORT_SYMBOL(__arch_strncpy_from_user);
 EXPORT_SYMBOL(__get_user_1);
 EXPORT_SYMBOL(__get_user_2);
 EXPORT_SYMBOL(__get_user_4);
-EXPORT_SYMBOL(__get_user_8);
 
 EXPORT_SYMBOL(__put_user_1);
 EXPORT_SYMBOL(__put_user_2);

arch/arm/kernel/entry-common.S

@@ -48,8 +48,7 @@ work_pending:
 	mov	r0, sp				@ 'regs'
 	mov	r2, why				@ 'syscall'
 	bl	do_notify_resume
-	disable_irq				@ disable interrupts
-	b	no_work_pending
+	b	ret_slow_syscall		@ Check work again
 
 work_resched:
 	bl	schedule

arch/arm/kernel/signal.c

@@ -595,23 +595,22 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
 	 */
 	ret |= !valid_user_regs(regs);
 
-	/*
-	 * Block the signal if we were unsuccessful.
-	 */
 	if (ret != 0) {
-		spin_lock_irq(&tsk->sighand->siglock);
-		sigorsets(&tsk->blocked, &tsk->blocked,
-			  &ka->sa.sa_mask);
-		if (!(ka->sa.sa_flags & SA_NODEFER))
-			sigaddset(&tsk->blocked, sig);
-		recalc_sigpending();
-		spin_unlock_irq(&tsk->sighand->siglock);
+		force_sigsegv(sig, tsk);
+		return;
 	}
 
-	if (ret == 0)
-		return;
+	/*
+	 * Block the signal if we were successful.
+	 */
+	spin_lock_irq(&tsk->sighand->siglock);
+	sigorsets(&tsk->blocked, &tsk->blocked,
+		  &ka->sa.sa_mask);
+	if (!(ka->sa.sa_flags & SA_NODEFER))
+		sigaddset(&tsk->blocked, sig);
+	recalc_sigpending();
+	spin_unlock_irq(&tsk->sighand->siglock);
 
-	force_sigsegv(sig, tsk);
 }
 
 /*

arch/arm/kernel/vmlinux.lds.S

@@ -172,6 +172,10 @@ SECTIONS
 	.comment 0 : { *(.comment) }
 }
 
-/* those must never be empty */
+/*
+ * These must never be empty
+ * If you have to comment these two assert statements out, your
+ * binutils is too old (for other reasons as well)
+ */
 ASSERT((__proc_info_end - __proc_info_begin), "missing CPU support")
 ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined")

arch/arm/lib/getuser.S

@@ -54,15 +54,6 @@ __get_user_4:
 	mov	r0, #0
 	mov	pc, lr
 
-	.global	__get_user_8
-__get_user_8:
-5:	ldrt	r2, [r0], #4
-6:	ldrt	r3, [r0]
-	mov	r0, #0
-	mov	pc, lr
-
-__get_user_bad_8:
-	mov	r3, #0
 __get_user_bad:
 	mov	r2, #0
 	mov	r0, #-EFAULT
@@ -73,6 +64,4 @@ __get_user_bad:
 	.long	2b, __get_user_bad
 	.long	3b, __get_user_bad
 	.long	4b, __get_user_bad
-	.long	5b, __get_user_bad_8
-	.long	6b, __get_user_bad_8
 .previous

arch/arm/mm/Makefile

@@ -51,4 +51,4 @@ obj-$(CONFIG_CPU_ARM1026)	+= proc-arm1026.o
 obj-$(CONFIG_CPU_SA110)		+= proc-sa110.o
 obj-$(CONFIG_CPU_SA1100)	+= proc-sa1100.o
 obj-$(CONFIG_CPU_XSCALE)	+= proc-xscale.o
-obj-$(CONFIG_CPU_V6)		+= proc-v6.o blockops.o
+obj-$(CONFIG_CPU_V6)		+= proc-v6.o

arch/arm/mm/init.c

@@ -420,14 +420,21 @@ static void __init bootmem_init(struct meminfo *mi)
  * Set up device the mappings.  Since we clear out the page tables for all
  * mappings above VMALLOC_END, we will remove any debug device mappings.
  * This means you have to be careful how you debug this function, or any
- * called function.  (Do it by code inspection!)
+ * called function.  This means you can't use any function or debugging
+ * method which may touch any device, otherwise the kernel _will_ crash.
  */
 static void __init devicemaps_init(struct machine_desc *mdesc)
 {
 	struct map_desc map;
 	unsigned long addr;
 	void *vectors;
 
+	/*
+	 * Allocate the vector page early.
+	 */
+	vectors = alloc_bootmem_low_pages(PAGE_SIZE);
+	BUG_ON(!vectors);
+
 	for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE)
 		pmd_clear(pmd_off_k(addr));
 
@@ -461,12 +468,6 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
 	create_mapping(&map);
 #endif
 
-	flush_cache_all();
-	local_flush_tlb_all();
-
-	vectors = alloc_bootmem_low_pages(PAGE_SIZE);
-	BUG_ON(!vectors);
-
 	/*
 	 * Create a mapping for the machine vectors at the high-vectors
 	 * location (0xffff0000).  If we aren't using high-vectors, also
@@ -491,12 +492,13 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
 		mdesc->map_io();
 
 	/*
-	 * Finally flush the tlb again - this ensures that we're in a
-	 * consistent state wrt the writebuffer if the writebuffer needs
-	 * draining.  After this point, we can start to touch devices
-	 * again.
+	 * Finally flush the caches and tlb to ensure that we're in a
+	 * consistent state wrt the writebuffer.  This also ensures that
+	 * any write-allocated cache lines in the vector page are written
+	 * back.  After this point, we can start to touch devices again.
 	 */
 	local_flush_tlb_all();
+	flush_cache_all();
 }
 
 /*

arch/arm/mm/ioremap.c

@@ -130,8 +130,7 @@ remap_area_pages(unsigned long start, unsigned long phys_addr,
  * mapping.  See include/asm-arm/proc-armv/pgtable.h for more information.
  */
 void __iomem *
-__ioremap(unsigned long phys_addr, size_t size, unsigned long flags,
-	  unsigned long align)
+__ioremap(unsigned long phys_addr, size_t size, unsigned long flags)
 {
 	void * addr;
 	struct vm_struct * area;

drivers/mtd/maps/ipaq-flash.c

@@ -246,7 +246,7 @@ int __init ipaq_mtd_init(void)
 			ipaq_map[i].size = h3xxx_max_flash_size;
 			ipaq_map[i].set_vpp = h3xxx_set_vpp;
 			ipaq_map[i].phys = cs_phys[i];
-			ipaq_map[i].virt = __ioremap(cs_phys[i], 0x04000000, 0, 1);
+			ipaq_map[i].virt = ioremap(cs_phys[i], 0x04000000);
 			if (machine_is_h3100 () || machine_is_h1900())
 				ipaq_map[i].bankwidth = 2;
 		}
@@ -280,7 +280,7 @@ int __init ipaq_mtd_init(void)
 		nb_parts = ARRAY_SIZE(jornada_partitions);
 		ipaq_map[0].size = jornada_max_flash_size;
 		ipaq_map[0].set_vpp = jornada56x_set_vpp;
-		ipaq_map[0].virt = (__u32)__ioremap(0x0, 0x04000000, 0, 1);
+		ipaq_map[0].virt = (__u32)ioremap(0x0, 0x04000000);
 	}
 #endif
 #ifdef CONFIG_SA1100_JORNADA720
@@ -442,7 +442,7 @@ static int __init h1900_special_case(void)
 	ipaq_map[0].size = 0x80000;
 	ipaq_map[0].set_vpp = h3xxx_set_vpp;
 	ipaq_map[0].phys = 0x0;
-	ipaq_map[0].virt = __ioremap(0x0, 0x04000000, 0, 1);
+	ipaq_map[0].virt = ioremap(0x0, 0x04000000);
 	ipaq_map[0].bankwidth = 2;
 
 	printk(KERN_NOTICE "iPAQ flash: probing %d-bit flash bus, window=%lx with JEDEC.\n", ipaq_map[0].bankwidth*8, ipaq_map[0].virt);

drivers/mtd/nand/h1910.c

@@ -112,7 +112,7 @@ static int __init h1910_init (void)
 	if (!machine_is_h1900())
 		return -ENODEV;
 
-	nandaddr = __ioremap(0x08000000, 0x1000, 0, 1);
+	nandaddr = ioremap(0x08000000, 0x1000);
 	if (!nandaddr) {
 		printk("Failed to ioremap nand flash.\n");
 		return -ENOMEM;