I2S needs 3 lines:
- bit clock BCK or BCLK (officially "serial clock SCK")
- word select WS or LRCLK for it selects if data is for left or right
- serial data SD (multiplexed left right data)
- data can be in different formats I2S, Philips, left/right justified
The ESP8266 and Wemos D1 mini board pins are
| I2S | ESP8266 | Wemos D1 Mini |
|---|---|---|
| BCK | 15 | D8 |
| WS | 2 | D4 |
| SD | 3 | RX |
This has two major impacts.
- Don't do anything (setMode, digitalWrite) with the LED as it is connect to pin 2.
- RX0 is used as SD line and cannot be used to receive UART. Together with the fact that the second UART can only transmit, you cannot receive UART data. At least not via the hardware UARTs. TODO Maybe software uart works
See this excellent stackoverflow answer
I2S lines are labeled as:
| I2S | PCM510x |
|---|---|
| BCK | BCK |
| WS | LCK |
| SD | DIN |
Furthermore you need to connect GND to ground and VIN to 3.3 V (maybe 5V work to). And, important, connect the master clock (labeled SCK but not the serial clock mentioned earlier) to ground before powering the DAC. This signals the PCM510x that it needs to generate its own master clock.
| PCM510x | ESP8266 |
|---|---|
| SCK | GND |
| BCK | D8 |
| DIN | RX |
| LCK | D4 |
| GND | GND |
| VIN | 3.3V |