Support for additional devices

[maresb]

This is the latest information regarding support for other devices. This issue was migrated from computerlyrik/dymoprint#44.

• LabelManager PnP

  • This is the original device on which this project was built. Should work flawlessly.

• LabelManager 420P:

  • Works, but possibly with some alignment issues, see 420p label offset computerlyrik/dymoprint#80.

  • Older discussion: DYMO Mobile labeler computerlyrik/dymoprint#30 (comment)

  • usb-modeswitch-data

    # Dymo LabelManager 420P
    TargetVendor= 0x0922
    TargetProduct= 0x1004
    MessageEndpoint=0x01
    ResponseEndpoint=0x01
    MessageContent="1b5a01"
    

• LabelManager Wireless PnP

  • Status unknown
  • usb-modeswitch-data

    # Dymo LabelManager Wireless PnP
    TargetVendor= 0x0922
    TargetProduct= 0x1008
    MessageEndpoint=0x01
    ResponseEndpoint=0x01
    MessageContent="1b5a01"
    

• MobileLabeler

  • No success yet.

    ID 0922:1009 Dymo-CoStar Corp. DYMO MobileLabeler
    - @fssup DYMO Mobile labeler computerlyrik/dymoprint#30 (comment)

  • Also @Tahx added / activated tape size selector computerlyrik/dymoprint#20 (comment)

• LabelManager 280

  • Active discussion in Support for LabelManager 280 computerlyrik/dymoprint#40

  • ID 0922:1005 Dymo-CoStar Corp. DYMO LabelManager 280

    Not a HID, but recognized by CUPS.
    - @Scorcerer Support for LabelManager 280 computerlyrik/dymoprint#40 (comment)

• LabelWriter 450

  • This uses a different technology, more like a regular printer, so I don't see how we'd be able to support it anytime soon. This should be doable, and in fact there is a reference manual.

• LabelPoint 350

  • This supports 19mm tape. Implemented in Support for LabelPoint 350 & 19 mm tape size computerlyrik/dymoprint#73

• LabelManager PC

  • See Add DYMO LabelMANAGER PC to tested devices computerlyrik/dymoprint#83

• LabelWriter 400

  • See Allow larger tape sizes computerlyrik/dymoprint#117

• LabelWriter 550

  • Report of a timeout: Support for additional devices computerlyrik/dymoprint#44 (comment)
  • Another report with "Unable to open device": Application does not detect networked printer computerlyrik/dymoprint#116
  • @tomers has acquired a device and has plans to add support in the near future, Application does not detect networked printer computerlyrik/dymoprint#116 (comment)

[EmJotGeh]

Please Support the LabelManager PnP.

Dymo LabelManager-PnP

Addendum:

I am sorry, it was my fault. Labelle apparently only runs with root rights under Arch. It works perfectly. Many thanks to the developers.

[maresb]

@EmJotGeh, for competeness I added the LabelManager PnP to the list. Otherwise it is somewhat confusing.

Labelle apparently only runs with root rights under Arch.

That should not be the case. And if Labelle lacks the necessary permissions, it should inform on the proper commands to run to grant those permissions. Could this be a bug?

[maresb]

@EmJotGeh, thanks so much for pointing out the issue. I have a solution in #38 which I hope we can release shortly as Labelle v1.2.2.