SDL_pipewire.c

/*
  Simple DirectMedia Layer
  Copyright (C) 1997-2024 Sam Lantinga <slouken@libsdl.org>

  This software is provided 'as-is', without any express or implied
  warranty.  In no event will the authors be held liable for any damages
  arising from the use of this software.

  Permission is granted to anyone to use this software for any purpose,
  including commercial applications, and to alter it and redistribute it
  freely, subject to the following restrictions:

  1. The origin of this software must not be misrepresented; you must not
     claim that you wrote the original software. If you use this software
     in a product, an acknowledgment in the product documentation would be
     appreciated but is not required.
  2. Altered source versions must be plainly marked as such, and must not be
     misrepresented as being the original software.
  3. This notice may not be removed or altered from any source distribution.
*/

#include "SDL_internal.h"

#ifdef SDL_AUDIO_DRIVER_PIPEWIRE

#include "SDL_pipewire.h"

#include <pipewire/extensions/metadata.h>
#include <spa/param/audio/format-utils.h>
#include <spa/utils/json.h>

#include "../../core/linux/SDL_dbus.h"

static SDL_bool CheckPipewirePulseService()
{
#ifdef SDL_USE_LIBDBUS
    return SDL_DBus_QuerySystemdUnitRunning("pipewire-pulse.service", SDL_TRUE);
#else
    return SDL_FALSE;
#endif
}

/*
 * The following keys are defined for compatibility when building against older versions of Pipewire
 * prior to their introduction and can be removed if the minimum required Pipewire build version is
 * increased to or beyond their point of introduction.
 */

/*
 * Introduced in 0.3.22
 * Taken from /src/pipewire/keys.h
 */
#ifndef PW_KEY_CONFIG_NAME
#define PW_KEY_CONFIG_NAME "config.name"
#endif

/*
 * Introduced in 0.3.33
 * Taken from src/pipewire/keys.h
 */
#ifndef PW_KEY_NODE_RATE
#define PW_KEY_NODE_RATE "node.rate"
#endif

/*
 * Introduced in 0.3.44
 * Taken from src/pipewire/keys.h
 */
#ifndef PW_KEY_TARGET_OBJECT
#define PW_KEY_TARGET_OBJECT "target.object"
#endif

/*
 * This seems to be a sane lower limit as Pipewire
 * uses it in several of it's own modules.
 */
#define PW_MIN_SAMPLES     32 // About 0.67ms at 48kHz
#define PW_BASE_CLOCK_RATE 48000

#define PW_POD_BUFFER_LENGTH         1024
#define PW_THREAD_NAME_BUFFER_LENGTH 128
#define PW_MAX_IDENTIFIER_LENGTH     256

enum PW_READY_FLAGS
{
    PW_READY_FLAG_BUFFER_ADDED = 0x1,
    PW_READY_FLAG_STREAM_READY = 0x2,
    PW_READY_FLAG_ALL_BITS = 0x3
};

#define PW_ID_TO_HANDLE(x) (void *)((uintptr_t)x)
#define PW_HANDLE_TO_ID(x) (uint32_t)((uintptr_t)x)

static SDL_bool pipewire_initialized = SDL_FALSE;

// Pipewire entry points
static const char *(*PIPEWIRE_pw_get_library_version)(void);
static void (*PIPEWIRE_pw_init)(int *, char ***);
static void (*PIPEWIRE_pw_deinit)(void);
static struct pw_thread_loop *(*PIPEWIRE_pw_thread_loop_new)(const char *, const struct spa_dict *);
static void (*PIPEWIRE_pw_thread_loop_destroy)(struct pw_thread_loop *);
static void (*PIPEWIRE_pw_thread_loop_stop)(struct pw_thread_loop *);
static struct pw_loop *(*PIPEWIRE_pw_thread_loop_get_loop)(struct pw_thread_loop *);
static void (*PIPEWIRE_pw_thread_loop_lock)(struct pw_thread_loop *);
static void (*PIPEWIRE_pw_thread_loop_unlock)(struct pw_thread_loop *);
static void (*PIPEWIRE_pw_thread_loop_signal)(struct pw_thread_loop *, bool);
static void (*PIPEWIRE_pw_thread_loop_wait)(struct pw_thread_loop *);
static int (*PIPEWIRE_pw_thread_loop_start)(struct pw_thread_loop *);
static struct pw_context *(*PIPEWIRE_pw_context_new)(struct pw_loop *, struct pw_properties *, size_t);
static void (*PIPEWIRE_pw_context_destroy)(struct pw_context *);
static struct pw_core *(*PIPEWIRE_pw_context_connect)(struct pw_context *, struct pw_properties *, size_t);
static void (*PIPEWIRE_pw_proxy_add_object_listener)(struct pw_proxy *, struct spa_hook *, const void *, void *);
static void *(*PIPEWIRE_pw_proxy_get_user_data)(struct pw_proxy *);
static void (*PIPEWIRE_pw_proxy_destroy)(struct pw_proxy *);
static int (*PIPEWIRE_pw_core_disconnect)(struct pw_core *);
static struct pw_stream *(*PIPEWIRE_pw_stream_new_simple)(struct pw_loop *, const char *, struct pw_properties *,
                                                          const struct pw_stream_events *, void *);
static void (*PIPEWIRE_pw_stream_destroy)(struct pw_stream *);
static int (*PIPEWIRE_pw_stream_connect)(struct pw_stream *, enum pw_direction, uint32_t, enum pw_stream_flags,
                                         const struct spa_pod **, uint32_t);
static enum pw_stream_state (*PIPEWIRE_pw_stream_get_state)(struct pw_stream *stream, const char **error);
static struct pw_buffer *(*PIPEWIRE_pw_stream_dequeue_buffer)(struct pw_stream *);
static int (*PIPEWIRE_pw_stream_queue_buffer)(struct pw_stream *, struct pw_buffer *);
static struct pw_properties *(*PIPEWIRE_pw_properties_new)(const char *, ...)SPA_SENTINEL;
static int (*PIPEWIRE_pw_properties_set)(struct pw_properties *, const char *, const char *);
static int (*PIPEWIRE_pw_properties_setf)(struct pw_properties *, const char *, const char *, ...) SPA_PRINTF_FUNC(3, 4);

static int pipewire_version_major;
static int pipewire_version_minor;
static int pipewire_version_patch;

#ifdef SDL_AUDIO_DRIVER_PIPEWIRE_DYNAMIC

static const char *pipewire_library = SDL_AUDIO_DRIVER_PIPEWIRE_DYNAMIC;
static void *pipewire_handle = NULL;

static int pipewire_dlsym(const char *fn, void **addr)
{
    *addr = SDL_LoadFunction(pipewire_handle, fn);
    if (!*addr) {
        // Don't call SDL_SetError(): SDL_LoadFunction already did.
        return 0;
    }

    return 1;
}

#define SDL_PIPEWIRE_SYM(x)                                    \
    if (!pipewire_dlsym(#x, (void **)(char *)&PIPEWIRE_##x)) { \
        return -1;                                             \
    }

static int load_pipewire_library(void)
{
    pipewire_handle = SDL_LoadObject(pipewire_library);
    return pipewire_handle ? 0 : -1;
}

static void unload_pipewire_library(void)
{
    if (pipewire_handle) {
        SDL_UnloadObject(pipewire_handle);
        pipewire_handle = NULL;
    }
}

#else

#define SDL_PIPEWIRE_SYM(x) PIPEWIRE_##x = x

static int load_pipewire_library(void)
{
    return 0;
}

static void unload_pipewire_library(void)
{
    // Nothing to do
}

#endif // SDL_AUDIO_DRIVER_PIPEWIRE_DYNAMIC

static int load_pipewire_syms(void)
{
    SDL_PIPEWIRE_SYM(pw_get_library_version);
    SDL_PIPEWIRE_SYM(pw_init);
    SDL_PIPEWIRE_SYM(pw_deinit);
    SDL_PIPEWIRE_SYM(pw_thread_loop_new);
    SDL_PIPEWIRE_SYM(pw_thread_loop_destroy);
    SDL_PIPEWIRE_SYM(pw_thread_loop_stop);
    SDL_PIPEWIRE_SYM(pw_thread_loop_get_loop);
    SDL_PIPEWIRE_SYM(pw_thread_loop_lock);
    SDL_PIPEWIRE_SYM(pw_thread_loop_unlock);
    SDL_PIPEWIRE_SYM(pw_thread_loop_signal);
    SDL_PIPEWIRE_SYM(pw_thread_loop_wait);
    SDL_PIPEWIRE_SYM(pw_thread_loop_start);
    SDL_PIPEWIRE_SYM(pw_context_new);
    SDL_PIPEWIRE_SYM(pw_context_destroy);
    SDL_PIPEWIRE_SYM(pw_context_connect);
    SDL_PIPEWIRE_SYM(pw_proxy_add_object_listener);
    SDL_PIPEWIRE_SYM(pw_proxy_get_user_data);
    SDL_PIPEWIRE_SYM(pw_proxy_destroy);
    SDL_PIPEWIRE_SYM(pw_core_disconnect);
    SDL_PIPEWIRE_SYM(pw_stream_new_simple);
    SDL_PIPEWIRE_SYM(pw_stream_destroy);
    SDL_PIPEWIRE_SYM(pw_stream_connect);
    SDL_PIPEWIRE_SYM(pw_stream_get_state);
    SDL_PIPEWIRE_SYM(pw_stream_dequeue_buffer);
    SDL_PIPEWIRE_SYM(pw_stream_queue_buffer);
    SDL_PIPEWIRE_SYM(pw_properties_new);
    SDL_PIPEWIRE_SYM(pw_properties_set);
    SDL_PIPEWIRE_SYM(pw_properties_setf);

    return 0;
}

static SDL_bool pipewire_version_at_least(int major, int minor, int patch)
{
    return (pipewire_version_major >= major) &&
           (pipewire_version_major > major || pipewire_version_minor >= minor) &&
           (pipewire_version_major > major || pipewire_version_minor > minor || pipewire_version_patch >= patch);
}

static int init_pipewire_library(void)
{
    if (!load_pipewire_library()) {
        if (!load_pipewire_syms()) {
            int nargs;
            const char *version = PIPEWIRE_pw_get_library_version();
            nargs = SDL_sscanf(version, "%d.%d.%d", &pipewire_version_major, &pipewire_version_minor, &pipewire_version_patch);
            if (nargs < 3) {
                return -1;
            }

            // SDL can build against 0.3.20, but requires 0.3.24
            if (pipewire_version_at_least(0, 3, 24)) {
                PIPEWIRE_pw_init(NULL, NULL);
                return 0;
            }
        }
    }

    return -1;
}

static void deinit_pipewire_library(void)
{
    PIPEWIRE_pw_deinit();
    unload_pipewire_library();
}

// A generic Pipewire node object used for enumeration.
struct node_object
{
    struct spa_list link;

    Uint32 id;
    int seq;
    SDL_bool persist;

    /*
     * NOTE: If used, this is *must* be allocated with SDL_malloc() or similar
     * as SDL_free() will be called on it when the node_object is destroyed.
     *
     * If ownership of the referenced memory is transferred, this must be set
     * to NULL or the memory will be freed when the node_object is destroyed.
     */
    void *userdata;

    struct pw_proxy *proxy;
    struct spa_hook node_listener;
    struct spa_hook core_listener;
};

// A sink/source node used for stream I/O.
struct io_node
{
    struct spa_list link;

    Uint32 id;
    SDL_bool is_capture;
    SDL_AudioSpec spec;

    const char *name; // Friendly name
    const char *path; // OS identifier (i.e. ALSA endpoint)

    char buf[]; // Buffer to hold the name and path strings.
};

// The global hotplug thread and associated objects.
static struct pw_thread_loop *hotplug_loop;
static struct pw_core *hotplug_core;
static struct pw_context *hotplug_context;
static struct pw_registry *hotplug_registry;
static struct spa_hook hotplug_registry_listener;
static struct spa_hook hotplug_core_listener;
static struct spa_list hotplug_pending_list;
static struct spa_list hotplug_io_list;
static int hotplug_init_seq_val;
static SDL_bool hotplug_init_complete;
static SDL_bool hotplug_events_enabled;

static char *pipewire_default_sink_id = NULL;
static char *pipewire_default_source_id = NULL;

// The active node list
static SDL_bool io_list_check_add(struct io_node *node)
{
    struct io_node *n;
    SDL_bool ret = SDL_TRUE;

    // See if the node is already in the list
    spa_list_for_each (n, &hotplug_io_list, link) {
        if (n->id == node->id) {
            ret = SDL_FALSE;
            goto dup_found;
        }
    }

    // Add to the list if the node doesn't already exist
    spa_list_append(&hotplug_io_list, &node->link);

    if (hotplug_events_enabled) {
        SDL_AddAudioDevice(node->is_capture, node->name, &node->spec, PW_ID_TO_HANDLE(node->id));
    }

dup_found:

    return ret;
}

static void io_list_remove(Uint32 id)
{
    struct io_node *n, *temp;

    // Find and remove the node from the list
    spa_list_for_each_safe (n, temp, &hotplug_io_list, link) {
        if (n->id == id) {
            spa_list_remove(&n->link);

            if (hotplug_events_enabled) {
                SDL_AudioDeviceDisconnected(SDL_FindPhysicalAudioDeviceByHandle(PW_ID_TO_HANDLE(id)));
            }

            SDL_free(n);

            break;
        }
    }
}

static void io_list_clear(void)
{
    struct io_node *n, *temp;

    spa_list_for_each_safe (n, temp, &hotplug_io_list, link) {
        spa_list_remove(&n->link);
        SDL_free(n);
    }
}

static struct io_node *io_list_get_by_id(Uint32 id)
{
    struct io_node *n, *temp;
    spa_list_for_each_safe (n, temp, &hotplug_io_list, link) {
        if (n->id == id) {
            return n;
        }
    }
    return NULL;
}

static void node_object_destroy(struct node_object *node)
{
    SDL_assert(node != NULL);

    spa_list_remove(&node->link);
    spa_hook_remove(&node->node_listener);
    spa_hook_remove(&node->core_listener);
    SDL_free(node->userdata);
    PIPEWIRE_pw_proxy_destroy(node->proxy);
}

// The pending node list
static void pending_list_add(struct node_object *node)
{
    SDL_assert(node != NULL);
    spa_list_append(&hotplug_pending_list, &node->link);
}

static void pending_list_remove(Uint32 id)
{
    struct node_object *node, *temp;

    spa_list_for_each_safe (node, temp, &hotplug_pending_list, link) {
        if (node->id == id) {
            node_object_destroy(node);
        }
    }
}

static void pending_list_clear(void)
{
    struct node_object *node, *temp;

    spa_list_for_each_safe (node, temp, &hotplug_pending_list, link) {
        node_object_destroy(node);
    }
}

static void *node_object_new(Uint32 id, const char *type, Uint32 version, const void *funcs, const struct pw_core_events *core_events)
{
    struct pw_proxy *proxy;
    struct node_object *node;

    // Create the proxy object
    proxy = pw_registry_bind(hotplug_registry, id, type, version, sizeof(struct node_object));
    if (!proxy) {
        SDL_SetError("Pipewire: Failed to create proxy object (%i)", errno);
        return NULL;
    }

    node = PIPEWIRE_pw_proxy_get_user_data(proxy);
    SDL_zerop(node);

    node->id = id;
    node->proxy = proxy;

    // Add the callbacks
    pw_core_add_listener(hotplug_core, &node->core_listener, core_events, node);
    PIPEWIRE_pw_proxy_add_object_listener(node->proxy, &node->node_listener, funcs, node);

    // Add the node to the active list
    pending_list_add(node);

    return node;
}

// Core sync points
static void core_events_hotplug_init_callback(void *object, uint32_t id, int seq)
{
    if (id == PW_ID_CORE && seq == hotplug_init_seq_val) {
        // This core listener is no longer needed.
        spa_hook_remove(&hotplug_core_listener);

        // Signal that the initial I/O list is populated
        hotplug_init_complete = SDL_TRUE;
        PIPEWIRE_pw_thread_loop_signal(hotplug_loop, false);
    }
}

static void core_events_interface_callback(void *object, uint32_t id, int seq)
{
    struct node_object *node = object;
    struct io_node *io = node->userdata;

    if (id == PW_ID_CORE && seq == node->seq) {
        /*
         * Move the I/O node to the connected list.
         * On success, the list owns the I/O node object.
         */
        if (io_list_check_add(io)) {
            node->userdata = NULL;
        }

        node_object_destroy(node);
    }
}

static void core_events_metadata_callback(void *object, uint32_t id, int seq)
{
    struct node_object *node = object;

    if (id == PW_ID_CORE && seq == node->seq && !node->persist) {
        node_object_destroy(node);
    }
}

static const struct pw_core_events hotplug_init_core_events = { PW_VERSION_CORE_EVENTS, .done = core_events_hotplug_init_callback };
static const struct pw_core_events interface_core_events = { PW_VERSION_CORE_EVENTS, .done = core_events_interface_callback };
static const struct pw_core_events metadata_core_events = { PW_VERSION_CORE_EVENTS, .done = core_events_metadata_callback };

static void hotplug_core_sync(struct node_object *node)
{
    /*
     * Node sync events *must* come before the hotplug init sync events or the initial
     * I/O list will be incomplete when the main hotplug sync point is hit.
     */
    if (node) {
        node->seq = pw_core_sync(hotplug_core, PW_ID_CORE, node->seq);
    }

    if (!hotplug_init_complete) {
        hotplug_init_seq_val = pw_core_sync(hotplug_core, PW_ID_CORE, hotplug_init_seq_val);
    }
}

// Helpers for retrieving values from params
static SDL_bool get_range_param(const struct spa_pod *param, Uint32 key, int *def, int *min, int *max)
{
    const struct spa_pod_prop *prop;
    struct spa_pod *value;
    Uint32 n_values, choice;

    prop = spa_pod_find_prop(param, NULL, key);

    if (prop && prop->value.type == SPA_TYPE_Choice) {
        value = spa_pod_get_values(&prop->value, &n_values, &choice);

        if (n_values == 3 && choice == SPA_CHOICE_Range) {
            Uint32 *v = SPA_POD_BODY(value);

            if (v) {
                if (def) {
                    *def = (int)v[0];
                }
                if (min) {
                    *min = (int)v[1];
                }
                if (max) {
                    *max = (int)v[2];
                }

                return SDL_TRUE;
            }
        }
    }

    return SDL_FALSE;
}

static SDL_bool get_int_param(const struct spa_pod *param, Uint32 key, int *val)
{
    const struct spa_pod_prop *prop;
    Sint32 v;

    prop = spa_pod_find_prop(param, NULL, key);

    if (prop && spa_pod_get_int(&prop->value, &v) == 0) {
        if (val) {
            *val = (int)v;
        }

        return SDL_TRUE;
    }

    return SDL_FALSE;
}

// Interface node callbacks
static void node_event_info(void *object, const struct pw_node_info *info)
{
    struct node_object *node = object;
    struct io_node *io = node->userdata;
    const char *prop_val;
    Uint32 i;

    if (info) {
        prop_val = spa_dict_lookup(info->props, PW_KEY_AUDIO_CHANNELS);
        if (prop_val) {
            io->spec.channels = (Uint8)SDL_atoi(prop_val);
        }

        // Need to parse the parameters to get the sample rate
        for (i = 0; i < info->n_params; ++i) {
            pw_node_enum_params(node->proxy, 0, info->params[i].id, 0, 0, NULL);
        }

        hotplug_core_sync(node);
    }
}

static void node_event_param(void *object, int seq, uint32_t id, uint32_t index, uint32_t next, const struct spa_pod *param)
{
    struct node_object *node = object;
    struct io_node *io = node->userdata;

    // Get the default frequency
    if (io->spec.freq == 0) {
        get_range_param(param, SPA_FORMAT_AUDIO_rate, &io->spec.freq, NULL, NULL);
    }

    /*
     * The channel count should have come from the node properties,
     * but it is stored here as well. If one failed, try the other.
     */
    if (io->spec.channels == 0) {
        int channels;
        if (get_int_param(param, SPA_FORMAT_AUDIO_channels, &channels)) {
            io->spec.channels = (Uint8)channels;
        }
    }
}

static const struct pw_node_events interface_node_events = { PW_VERSION_NODE_EVENTS, .info = node_event_info,
                                                             .param = node_event_param };

static char *get_name_from_json(const char *json)
{
    struct spa_json parser[2];
    char key[7]; // "name"
    char value[PW_MAX_IDENTIFIER_LENGTH];
    spa_json_init(&parser[0], json, SDL_strlen(json));
    if (spa_json_enter_object(&parser[0], &parser[1]) <= 0) {
        // Not actually JSON
        return NULL;
    }
    if (spa_json_get_string(&parser[1], key, sizeof(key)) <= 0) {
        // Not actually a key/value pair
        return NULL;
    }
    if (spa_json_get_string(&parser[1], value, sizeof(value)) <= 0) {
        // Somehow had a key with no value?
        return NULL;
    }
    return SDL_strdup(value);
}

static void change_default_device(const char *path)
{
    if (hotplug_events_enabled) {
        struct io_node *n, *temp;
        spa_list_for_each_safe (n, temp, &hotplug_io_list, link) {
            if (SDL_strcmp(n->path, path) == 0) {
                SDL_DefaultAudioDeviceChanged(SDL_FindPhysicalAudioDeviceByHandle(PW_ID_TO_HANDLE(n->id)));
                return; // found it, we're done.
            }
        }
    }
}

// Metadata node callback
static int metadata_property(void *object, Uint32 subject, const char *key, const char *type, const char *value)
{
    struct node_object *node = object;

    if (subject == PW_ID_CORE && key && value) {
        if (!SDL_strcmp(key, "default.audio.sink")) {
            if (pipewire_default_sink_id) {
                SDL_free(pipewire_default_sink_id);
            }
            pipewire_default_sink_id = get_name_from_json(value);
            node->persist = SDL_TRUE;
            change_default_device(pipewire_default_sink_id);
        } else if (!SDL_strcmp(key, "default.audio.source")) {
            if (pipewire_default_source_id) {
                SDL_free(pipewire_default_source_id);
            }
            pipewire_default_source_id = get_name_from_json(value);
            node->persist = SDL_TRUE;
            change_default_device(pipewire_default_source_id);
        }
    }

    return 0;
}

static const struct pw_metadata_events metadata_node_events = { PW_VERSION_METADATA_EVENTS, .property = metadata_property };

// Global registry callbacks
static void registry_event_global_callback(void *object, uint32_t id, uint32_t permissions, const char *type, uint32_t version,
                                           const struct spa_dict *props)
{
    struct node_object *node;

    // We're only interested in interface and metadata nodes.
    if (!SDL_strcmp(type, PW_TYPE_INTERFACE_Node)) {
        const char *media_class = spa_dict_lookup(props, PW_KEY_MEDIA_CLASS);

        if (media_class) {
            const char *node_desc;
            const char *node_path;
            struct io_node *io;
            SDL_bool is_capture;
            int desc_buffer_len;
            int path_buffer_len;

            // Just want sink and capture
            if (!SDL_strcasecmp(media_class, "Audio/Sink")) {
                is_capture = SDL_FALSE;
            } else if (!SDL_strcasecmp(media_class, "Audio/Source")) {
                is_capture = SDL_TRUE;
            } else {
                return;
            }

            node_desc = spa_dict_lookup(props, PW_KEY_NODE_DESCRIPTION);
            node_path = spa_dict_lookup(props, PW_KEY_NODE_NAME);

            if (node_desc && node_path) {
                node = node_object_new(id, type, version, &interface_node_events, &interface_core_events);
                if (!node) {
                    SDL_SetError("Pipewire: Failed to allocate interface node");
                    return;
                }

                // Allocate and initialize the I/O node information struct
                desc_buffer_len = SDL_strlen(node_desc) + 1;
                path_buffer_len = SDL_strlen(node_path) + 1;
                node->userdata = io = SDL_calloc(1, sizeof(struct io_node) + desc_buffer_len + path_buffer_len);
                if (!io) {
                    node_object_destroy(node);
                    return;
                }

                // Begin setting the node properties
                io->id = id;
                io->is_capture = is_capture;
                io->spec.format = SDL_AUDIO_F32; // Pipewire uses floats internally, other formats require conversion.
                io->name = io->buf;
                io->path = io->buf + desc_buffer_len;
                SDL_strlcpy(io->buf, node_desc, desc_buffer_len);
                SDL_strlcpy(io->buf + desc_buffer_len, node_path, path_buffer_len);

                // Update sync points
                hotplug_core_sync(node);
            }
        }
    } else if (!SDL_strcmp(type, PW_TYPE_INTERFACE_Metadata)) {
        node = node_object_new(id, type, version, &metadata_node_events, &metadata_core_events);
        if (!node) {
            SDL_SetError("Pipewire: Failed to allocate metadata node");
            return;
        }

        // Update sync points
        hotplug_core_sync(node);
    }
}

static void registry_event_remove_callback(void *object, uint32_t id)
{
    io_list_remove(id);
    pending_list_remove(id);
}

static const struct pw_registry_events registry_events = { PW_VERSION_REGISTRY_EVENTS, .global = registry_event_global_callback,
                                                           .global_remove = registry_event_remove_callback };

// The hotplug thread
static int hotplug_loop_init(void)
{
    int res;

    spa_list_init(&hotplug_pending_list);
    spa_list_init(&hotplug_io_list);

    hotplug_loop = PIPEWIRE_pw_thread_loop_new("SDLAudioHotplug", NULL);
    if (!hotplug_loop) {
        return SDL_SetError("Pipewire: Failed to create hotplug detection loop (%i)", errno);
    }

    hotplug_context = PIPEWIRE_pw_context_new(PIPEWIRE_pw_thread_loop_get_loop(hotplug_loop), NULL, 0);
    if (!hotplug_context) {
        return SDL_SetError("Pipewire: Failed to create hotplug detection context (%i)", errno);
    }

    hotplug_core = PIPEWIRE_pw_context_connect(hotplug_context, NULL, 0);
    if (!hotplug_core) {
        return SDL_SetError("Pipewire: Failed to connect hotplug detection context (%i)", errno);
    }

    hotplug_registry = pw_core_get_registry(hotplug_core, PW_VERSION_REGISTRY, 0);
    if (!hotplug_registry) {
        return SDL_SetError("Pipewire: Failed to acquire hotplug detection registry (%i)", errno);
    }

    spa_zero(hotplug_registry_listener);
    pw_registry_add_listener(hotplug_registry, &hotplug_registry_listener, &registry_events, NULL);

    spa_zero(hotplug_core_listener);
    pw_core_add_listener(hotplug_core, &hotplug_core_listener, &hotplug_init_core_events, NULL);

    hotplug_init_seq_val = pw_core_sync(hotplug_core, PW_ID_CORE, 0);

    res = PIPEWIRE_pw_thread_loop_start(hotplug_loop);
    if (res != 0) {
        return SDL_SetError("Pipewire: Failed to start hotplug detection loop");
    }

    return 0;
}

static void hotplug_loop_destroy(void)
{
    if (hotplug_loop) {
        PIPEWIRE_pw_thread_loop_stop(hotplug_loop);
    }

    pending_list_clear();
    io_list_clear();

    hotplug_init_complete = SDL_FALSE;
    hotplug_events_enabled = SDL_FALSE;

    if (pipewire_default_sink_id) {
        SDL_free(pipewire_default_sink_id);
        pipewire_default_sink_id = NULL;
    }
    if (pipewire_default_source_id) {
        SDL_free(pipewire_default_source_id);
        pipewire_default_source_id = NULL;
    }

    if (hotplug_registry) {
        PIPEWIRE_pw_proxy_destroy((struct pw_proxy *)hotplug_registry);
        hotplug_registry = NULL;
    }

    if (hotplug_core) {
        PIPEWIRE_pw_core_disconnect(hotplug_core);
        hotplug_core = NULL;
    }

    if (hotplug_context) {
        PIPEWIRE_pw_context_destroy(hotplug_context);
        hotplug_context = NULL;
    }

    if (hotplug_loop) {
        PIPEWIRE_pw_thread_loop_destroy(hotplug_loop);
        hotplug_loop = NULL;
    }
}

static void PIPEWIRE_DetectDevices(SDL_AudioDevice **default_output, SDL_AudioDevice **default_capture)
{
    struct io_node *io;

    PIPEWIRE_pw_thread_loop_lock(hotplug_loop);

    // Wait until the initial registry enumeration is complete
    if (!hotplug_init_complete) {
        PIPEWIRE_pw_thread_loop_wait(hotplug_loop);
    }

    spa_list_for_each (io, &hotplug_io_list, link) {
        SDL_AudioDevice *device = SDL_AddAudioDevice(io->is_capture, io->name, &io->spec, PW_ID_TO_HANDLE(io->id));
        if (pipewire_default_sink_id && SDL_strcmp(io->path, pipewire_default_sink_id) == 0) {
            if (!io->is_capture) {
                *default_output = device;
            }
        } else if (pipewire_default_source_id && SDL_strcmp(io->path, pipewire_default_source_id) == 0) {
            if (io->is_capture) {
                *default_capture = device;
            }
        }
    }

    hotplug_events_enabled = SDL_TRUE;

    PIPEWIRE_pw_thread_loop_unlock(hotplug_loop);
}

// Channel maps that match the order in SDL_Audio.h
static const enum spa_audio_channel PIPEWIRE_channel_map_1[] = { SPA_AUDIO_CHANNEL_MONO };
static const enum spa_audio_channel PIPEWIRE_channel_map_2[] = { SPA_AUDIO_CHANNEL_FL, SPA_AUDIO_CHANNEL_FR };
static const enum spa_audio_channel PIPEWIRE_channel_map_3[] = { SPA_AUDIO_CHANNEL_FL, SPA_AUDIO_CHANNEL_FR, SPA_AUDIO_CHANNEL_LFE };
static const enum spa_audio_channel PIPEWIRE_channel_map_4[] = { SPA_AUDIO_CHANNEL_FL, SPA_AUDIO_CHANNEL_FR, SPA_AUDIO_CHANNEL_RL,
                                                                 SPA_AUDIO_CHANNEL_RR };
static const enum spa_audio_channel PIPEWIRE_channel_map_5[] = { SPA_AUDIO_CHANNEL_FL, SPA_AUDIO_CHANNEL_FR, SPA_AUDIO_CHANNEL_FC,
                                                                 SPA_AUDIO_CHANNEL_RL, SPA_AUDIO_CHANNEL_RR };
static const enum spa_audio_channel PIPEWIRE_channel_map_6[] = { SPA_AUDIO_CHANNEL_FL, SPA_AUDIO_CHANNEL_FR, SPA_AUDIO_CHANNEL_FC,
                                                                 SPA_AUDIO_CHANNEL_LFE, SPA_AUDIO_CHANNEL_RL, SPA_AUDIO_CHANNEL_RR };
static const enum spa_audio_channel PIPEWIRE_channel_map_7[] = { SPA_AUDIO_CHANNEL_FL, SPA_AUDIO_CHANNEL_FR, SPA_AUDIO_CHANNEL_FC,
                                                                 SPA_AUDIO_CHANNEL_LFE, SPA_AUDIO_CHANNEL_RC, SPA_AUDIO_CHANNEL_RL,
                                                                 SPA_AUDIO_CHANNEL_RR };
static const enum spa_audio_channel PIPEWIRE_channel_map_8[] = { SPA_AUDIO_CHANNEL_FL, SPA_AUDIO_CHANNEL_FR, SPA_AUDIO_CHANNEL_FC,
                                                                 SPA_AUDIO_CHANNEL_LFE, SPA_AUDIO_CHANNEL_RL, SPA_AUDIO_CHANNEL_RR,
                                                                 SPA_AUDIO_CHANNEL_SL, SPA_AUDIO_CHANNEL_SR };

#define COPY_CHANNEL_MAP(c) SDL_memcpy(info->position, PIPEWIRE_channel_map_##c, sizeof(PIPEWIRE_channel_map_##c))

static void initialize_spa_info(const SDL_AudioSpec *spec, struct spa_audio_info_raw *info)
{
    info->channels = spec->channels;
    info->rate = spec->freq;

    switch (spec->channels) {
    case 1:
        COPY_CHANNEL_MAP(1);
        break;
    case 2:
        COPY_CHANNEL_MAP(2);
        break;
    case 3:
        COPY_CHANNEL_MAP(3);
        break;
    case 4:
        COPY_CHANNEL_MAP(4);
        break;
    case 5:
        COPY_CHANNEL_MAP(5);
        break;
    case 6:
        COPY_CHANNEL_MAP(6);
        break;
    case 7:
        COPY_CHANNEL_MAP(7);
        break;
    case 8:
        COPY_CHANNEL_MAP(8);
        break;
    }

    // Pipewire natively supports all of SDL's sample formats
    switch (spec->format) {
    case SDL_AUDIO_U8:
        info->format = SPA_AUDIO_FORMAT_U8;
        break;
    case SDL_AUDIO_S8:
        info->format = SPA_AUDIO_FORMAT_S8;
        break;
    case SDL_AUDIO_S16LE:
        info->format = SPA_AUDIO_FORMAT_S16_LE;
        break;
    case SDL_AUDIO_S16BE:
        info->format = SPA_AUDIO_FORMAT_S16_BE;
        break;
    case SDL_AUDIO_S32LE:
        info->format = SPA_AUDIO_FORMAT_S32_LE;
        break;
    case SDL_AUDIO_S32BE:
        info->format = SPA_AUDIO_FORMAT_S32_BE;
        break;
    case SDL_AUDIO_F32LE:
        info->format = SPA_AUDIO_FORMAT_F32_LE;
        break;
    case SDL_AUDIO_F32BE:
        info->format = SPA_AUDIO_FORMAT_F32_BE;
        break;
    }
}

static Uint8 *PIPEWIRE_GetDeviceBuf(SDL_AudioDevice *device, int *buffer_size)
{
    // See if a buffer is available. If this returns NULL, SDL_OutputAudioThreadIterate will return SDL_FALSE, but since we own the thread, it won't kill playback.
    // !!! FIXME: It's not clear to me if this ever returns NULL or if this was just defensive coding.

    struct pw_stream *stream = device->hidden->stream;
    struct pw_buffer *pw_buf = PIPEWIRE_pw_stream_dequeue_buffer(stream);
    if (pw_buf == NULL) {
        return NULL;
    }

    struct spa_buffer *spa_buf = pw_buf->buffer;
    if (spa_buf->datas[0].data == NULL) {
        PIPEWIRE_pw_stream_queue_buffer(stream, pw_buf);
        return NULL;
    }

    device->hidden->pw_buf = pw_buf;
    return (Uint8 *) spa_buf->datas[0].data;
}

static int PIPEWIRE_PlayDevice(SDL_AudioDevice *device, const Uint8 *buffer, int buffer_size)
{
    struct pw_stream *stream = device->hidden->stream;
    struct pw_buffer *pw_buf = device->hidden->pw_buf;
    struct spa_buffer *spa_buf = pw_buf->buffer;
    spa_buf->datas[0].chunk->offset = 0;
    spa_buf->datas[0].chunk->stride = device->hidden->stride;
    spa_buf->datas[0].chunk->size = buffer_size;

    PIPEWIRE_pw_stream_queue_buffer(stream, pw_buf);
    device->hidden->pw_buf = NULL;

    return 0;
}

static void output_callback(void *data)
{
    SDL_OutputAudioThreadIterate((SDL_AudioDevice *)data);
}

static void PIPEWIRE_FlushCapture(SDL_AudioDevice *device)
{
    struct pw_stream *stream = device->hidden->stream;
    struct pw_buffer *pw_buf = PIPEWIRE_pw_stream_dequeue_buffer(stream);
    if (pw_buf) {  // just requeue it without any further thought.
        PIPEWIRE_pw_stream_queue_buffer(stream, pw_buf);
    }
}

static int PIPEWIRE_CaptureFromDevice(SDL_AudioDevice *device, void *buffer, int buflen)
{
    struct pw_stream *stream = device->hidden->stream;
    struct pw_buffer *pw_buf = PIPEWIRE_pw_stream_dequeue_buffer(stream);
    if (!pw_buf) {
        return 0;
    }

    struct spa_buffer *spa_buf = pw_buf->buffer;
    if (!spa_buf) {
        PIPEWIRE_pw_stream_queue_buffer(stream, pw_buf);
        return 0;
    }

    const Uint8 *src = (const Uint8 *)spa_buf->datas[0].data;
    const Uint32 offset = SPA_MIN(spa_buf->datas[0].chunk->offset, spa_buf->datas[0].maxsize);
    const Uint32 size = SPA_MIN(spa_buf->datas[0].chunk->size, spa_buf->datas[0].maxsize - offset);
    const int cpy = SDL_min(buflen, (int) size);

    SDL_assert(size <= buflen);  // We'll have to reengineer some stuff if this turns out to not be true.

    SDL_memcpy(buffer, src + offset, cpy);
    PIPEWIRE_pw_stream_queue_buffer(stream, pw_buf);

    return cpy;
}

static void input_callback(void *data)
{
    SDL_CaptureAudioThreadIterate((SDL_AudioDevice *)data);
}

static void stream_add_buffer_callback(void *data, struct pw_buffer *buffer)
{
    SDL_AudioDevice *device = (SDL_AudioDevice *) data;

    if (device->iscapture == SDL_FALSE) {
        /* Clamp the output spec samples and size to the max size of the Pipewire buffer.
           If they exceed the maximum size of the Pipewire buffer, double buffering will be used. */
        if (device->buffer_size > buffer->buffer->datas[0].maxsize) {
            SDL_LockMutex(device->lock);
            device->sample_frames = buffer->buffer->datas[0].maxsize / device->hidden->stride;
            device->buffer_size = buffer->buffer->datas[0].maxsize;
            SDL_UnlockMutex(device->lock);
        }
    }

    device->hidden->stream_init_status |= PW_READY_FLAG_BUFFER_ADDED;
    PIPEWIRE_pw_thread_loop_signal(device->hidden->loop, false);
}

static void stream_state_changed_callback(void *data, enum pw_stream_state old, enum pw_stream_state state, const char *error)
{
    SDL_AudioDevice *device = (SDL_AudioDevice *) data;

    if (state == PW_STREAM_STATE_STREAMING) {
        device->hidden->stream_init_status |= PW_READY_FLAG_STREAM_READY;
    }

    if (state == PW_STREAM_STATE_STREAMING || state == PW_STREAM_STATE_ERROR) {
        PIPEWIRE_pw_thread_loop_signal(device->hidden->loop, false);
    }
}

static const struct pw_stream_events stream_output_events = { PW_VERSION_STREAM_EVENTS,
                                                              .state_changed = stream_state_changed_callback,
                                                              .add_buffer = stream_add_buffer_callback,
                                                              .process = output_callback };
static const struct pw_stream_events stream_input_events = { PW_VERSION_STREAM_EVENTS,
                                                             .state_changed = stream_state_changed_callback,
                                                             .add_buffer = stream_add_buffer_callback,
                                                             .process = input_callback };

static int PIPEWIRE_OpenDevice(SDL_AudioDevice *device)
{
    /*
     * NOTE: The PW_STREAM_FLAG_RT_PROCESS flag can be set to call the stream
     * processing callback from the realtime thread.  However, it comes with some
     * caveats: no file IO, allocations, locking or other blocking operations
     * must occur in the mixer callback.  As this cannot be guaranteed when the
     * callback is in the calling application, this flag is omitted.
     */
    static const enum pw_stream_flags STREAM_FLAGS = PW_STREAM_FLAG_AUTOCONNECT | PW_STREAM_FLAG_MAP_BUFFERS;

    char thread_name[PW_THREAD_NAME_BUFFER_LENGTH];
    Uint8 pod_buffer[PW_POD_BUFFER_LENGTH];
    struct spa_pod_builder b = SPA_POD_BUILDER_INIT(pod_buffer, sizeof(pod_buffer));
    struct spa_audio_info_raw spa_info = { 0 };
    const struct spa_pod *params = NULL;
    struct SDL_PrivateAudioData *priv;
    struct pw_properties *props;
    const char *app_name, *app_id, *stream_name, *stream_role, *error;
    Uint32 node_id = !device->handle ? PW_ID_ANY : PW_HANDLE_TO_ID(device->handle);
    const SDL_bool iscapture = device->iscapture;
    int res;

    // Clamp the period size to sane values
    const int min_period = PW_MIN_SAMPLES * SPA_MAX(device->spec.freq / PW_BASE_CLOCK_RATE, 1);

    // Get the hints for the application name, stream name and role
    app_name = SDL_GetHint(SDL_HINT_AUDIO_DEVICE_APP_NAME);
    if (!app_name || *app_name == '\0') {
        app_name = SDL_GetHint(SDL_HINT_APP_NAME);
        if (!app_name || *app_name == '\0') {
            app_name = "SDL Application";
        }
    }

    // App ID. Default to NULL if not available.
    app_id = SDL_GetHint(SDL_HINT_APP_ID);

    stream_name = SDL_GetHint(SDL_HINT_AUDIO_DEVICE_STREAM_NAME);
    if (!stream_name || *stream_name == '\0') {
        stream_name = "Audio Stream";
    }

    /*
     * 'Music' is the default used internally by Pipewire and it's modules,
     * but 'Game' seems more appropriate for the majority of SDL applications.
     */
    stream_role = SDL_GetHint(SDL_HINT_AUDIO_DEVICE_STREAM_ROLE);
    if (!stream_role || *stream_role == '\0') {
        stream_role = "Game";
    }

    // Initialize the Pipewire stream info from the SDL audio spec
    initialize_spa_info(&device->spec, &spa_info);
    params = spa_format_audio_raw_build(&b, SPA_PARAM_EnumFormat, &spa_info);
    if (!params) {
        return SDL_SetError("Pipewire: Failed to set audio format parameters");
    }

    priv = SDL_calloc(1, sizeof(struct SDL_PrivateAudioData));
    device->hidden = priv;
    if (!priv) {
        return -1;
    }

    // Size of a single audio frame in bytes
    priv->stride = SDL_AUDIO_FRAMESIZE(device->spec);

    if (device->sample_frames < min_period) {
        device->sample_frames = min_period;
    }

    SDL_UpdatedAudioDeviceFormat(device);

    SDL_GetAudioThreadName(device, thread_name, sizeof(thread_name));
    priv->loop = PIPEWIRE_pw_thread_loop_new(thread_name, NULL);
    if (!priv->loop) {
        return SDL_SetError("Pipewire: Failed to create stream loop (%i)", errno);
    }

    // Load the realtime module so Pipewire can set the loop thread to the appropriate priority.
    props = PIPEWIRE_pw_properties_new(PW_KEY_CONFIG_NAME, "client-rt.conf", NULL);
    if (!props) {
        return SDL_SetError("Pipewire: Failed to create stream context properties (%i)", errno);
    }

    priv->context = PIPEWIRE_pw_context_new(PIPEWIRE_pw_thread_loop_get_loop(priv->loop), props, 0);
    if (!priv->context) {
        return SDL_SetError("Pipewire: Failed to create stream context (%i)", errno);
    }

    props = PIPEWIRE_pw_properties_new(NULL, NULL);
    if (!props) {
        return SDL_SetError("Pipewire: Failed to create stream properties (%i)", errno);
    }

    PIPEWIRE_pw_properties_set(props, PW_KEY_MEDIA_TYPE, "Audio");
    PIPEWIRE_pw_properties_set(props, PW_KEY_MEDIA_CATEGORY, iscapture ? "Capture" : "Playback");
    PIPEWIRE_pw_properties_set(props, PW_KEY_MEDIA_ROLE, stream_role);
    PIPEWIRE_pw_properties_set(props, PW_KEY_APP_NAME, app_name);
    if (app_id) {
        PIPEWIRE_pw_properties_set(props, PW_KEY_APP_ID, app_id);
    }
    PIPEWIRE_pw_properties_set(props, PW_KEY_NODE_NAME, stream_name);
    PIPEWIRE_pw_properties_set(props, PW_KEY_NODE_DESCRIPTION, stream_name);
    PIPEWIRE_pw_properties_setf(props, PW_KEY_NODE_LATENCY, "%u/%i", device->sample_frames, device->spec.freq);
    PIPEWIRE_pw_properties_setf(props, PW_KEY_NODE_RATE, "1/%u", device->spec.freq);
    PIPEWIRE_pw_properties_set(props, PW_KEY_NODE_ALWAYS_PROCESS, "true");
    PIPEWIRE_pw_properties_set(props, PW_KEY_NODE_DONT_RECONNECT, "true");  // Requesting a specific device, don't migrate to new default hardware.

    /*
     * Pipewire 0.3.44 introduced PW_KEY_TARGET_OBJECT that takes either a path
     * (PW_KEY_NODE_NAME) or node serial number (PE_KEY_OBJECT_SERIAL) to connect
     * the stream to its target. The target_id parameter in pw_stream_connect() is
     * now deprecated and should always be PW_ID_ANY.
     */
    if (pipewire_version_at_least(0, 3, 44)) {
        if (node_id != PW_ID_ANY) {
            const struct io_node *node;

            PIPEWIRE_pw_thread_loop_lock(hotplug_loop);
            node = io_list_get_by_id(node_id);
            if (node) {
                PIPEWIRE_pw_properties_set(props, PW_KEY_TARGET_OBJECT, node->path);
            }
            PIPEWIRE_pw_thread_loop_unlock(hotplug_loop);

            node_id = PW_ID_ANY;
        }
    }

    // Create the new stream
    priv->stream = PIPEWIRE_pw_stream_new_simple(PIPEWIRE_pw_thread_loop_get_loop(priv->loop), stream_name, props,
                                                 iscapture ? &stream_input_events : &stream_output_events, device);
    if (!priv->stream) {
        return SDL_SetError("Pipewire: Failed to create stream (%i)", errno);
    }

    res = PIPEWIRE_pw_stream_connect(priv->stream, iscapture ? PW_DIRECTION_INPUT : PW_DIRECTION_OUTPUT, node_id, STREAM_FLAGS,
                                     &params, 1);
    if (res != 0) {
        return SDL_SetError("Pipewire: Failed to connect stream");
    }

    res = PIPEWIRE_pw_thread_loop_start(priv->loop);
    if (res != 0) {
        return SDL_SetError("Pipewire: Failed to start stream loop");
    }

    // Wait until all init flags are set or the stream has failed.
    PIPEWIRE_pw_thread_loop_lock(priv->loop);
    while (priv->stream_init_status != PW_READY_FLAG_ALL_BITS &&
           PIPEWIRE_pw_stream_get_state(priv->stream, NULL) != PW_STREAM_STATE_ERROR) {
        PIPEWIRE_pw_thread_loop_wait(priv->loop);
    }
    PIPEWIRE_pw_thread_loop_unlock(priv->loop);

    if (PIPEWIRE_pw_stream_get_state(priv->stream, &error) == PW_STREAM_STATE_ERROR) {
        return SDL_SetError("Pipewire: Stream error: %s", error);
    }

    return 0;
}

static void PIPEWIRE_CloseDevice(SDL_AudioDevice *device)
{
    if (!device->hidden) {
        return;
    }

    if (device->hidden->loop) {
        PIPEWIRE_pw_thread_loop_stop(device->hidden->loop);
    }

    if (device->hidden->stream) {
        PIPEWIRE_pw_stream_destroy(device->hidden->stream);
    }

    if (device->hidden->context) {
        PIPEWIRE_pw_context_destroy(device->hidden->context);
    }

    if (device->hidden->loop) {
        PIPEWIRE_pw_thread_loop_destroy(device->hidden->loop);
    }

    SDL_free(device->hidden);
    device->hidden = NULL;

    SDL_AudioThreadFinalize(device);
}

static void PIPEWIRE_DeinitializeStart(void)
{
    if (pipewire_initialized) {
        hotplug_loop_destroy();
    }
}

static void PIPEWIRE_Deinitialize(void)
{
    if (pipewire_initialized) {
        deinit_pipewire_library();
        pipewire_initialized = SDL_FALSE;
    }
}

static SDL_bool PipewireInitialize(SDL_AudioDriverImpl *impl)
{
    if (!pipewire_initialized) {
        if (init_pipewire_library() < 0) {
            return SDL_FALSE;
        }

        pipewire_initialized = SDL_TRUE;

        if (hotplug_loop_init() < 0) {
            PIPEWIRE_Deinitialize();
            return SDL_FALSE;
        }
    }

    impl->DetectDevices = PIPEWIRE_DetectDevices;
    impl->OpenDevice = PIPEWIRE_OpenDevice;
    impl->DeinitializeStart = PIPEWIRE_DeinitializeStart;
    impl->Deinitialize = PIPEWIRE_Deinitialize;
    impl->PlayDevice = PIPEWIRE_PlayDevice;
    impl->GetDeviceBuf = PIPEWIRE_GetDeviceBuf;
    impl->CaptureFromDevice = PIPEWIRE_CaptureFromDevice;
    impl->FlushCapture = PIPEWIRE_FlushCapture;
    impl->CloseDevice = PIPEWIRE_CloseDevice;

    impl->HasCaptureSupport = SDL_TRUE;
    impl->ProvidesOwnCallbackThread = SDL_TRUE;

    return SDL_TRUE;
}

static SDL_bool PIPEWIRE_PREFERRED_Init(SDL_AudioDriverImpl *impl)
{
    if (CheckPipewirePulseService()) {
        return PipewireInitialize(impl);
    }

    return SDL_FALSE;
}

static SDL_bool PIPEWIRE_Init(SDL_AudioDriverImpl *impl)
{
    return PipewireInitialize(impl);
}

AudioBootStrap PIPEWIRE_PREFERRED_bootstrap = {
    "pipewire", "Pipewire", PIPEWIRE_PREFERRED_Init, SDL_FALSE
};
AudioBootStrap PIPEWIRE_bootstrap = {
    "pipewire", "Pipewire", PIPEWIRE_Init, SDL_FALSE
};

#endif // SDL_AUDIO_DRIVER_PIPEWIRE