This is a test project to demonstrate using Core Independent Peripherals (CIP) to modulate an infrared signal and reproduce a typical IR remote control transmission. This demo reproduces the Apple (new) IR remote control.
- Device: PIC16F1709 (any other PIC16F1 featuring PPS and CLC)
- Board: PICDEM® Low Pin Count or Simplicity
- Debugger: PICkit® 3
- IR Click® board
- Use TMR2 + PWM2 to generate a carrier at 38kHz.
- Use TMR1 and CLC1 to modulate the carrier using the NEC RC protocol.
- Drive the IR Click board output (PWM pin)
- If the PICDEM LPC / Simplicity board is powered by the PICkit 3, the transmission will have a minimal range (point directly at the receiver)
- Check the Simplicity project for more demo like this using the MPLAB Code Configurator and the MikroElektronika Click(tm) boards.