Skip to content

Robin nano V3 is an upgraded version of Robin Nano V2.0. The upgrade changes are quite large, including upgrading the MCU to the M4 core, and adding support for USB disk.

License

Notifications You must be signed in to change notification settings

makerbase-mks/MKS-Robin-Nano-V3.X

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

43 Commits
 
 
 
 
 
 
 
 
 
 

Repository files navigation

MKS-Robin-Nano-V3.X

Robin nano V3 is an upgraded version of Robin Nano V2.0. The upgrade changes are quite large, including upgrading the MCU to the M4 core, and adding support for USB disk.

Related tutorials and Notice

  • User Manual.click here
  • Welcome to follow us on Facebook to learn about the company's latest developments.click here

How to buy

Compare between Robin Nano V2.0 and V3.0

ITEMS Robin Nano V2.0 Robin Nano V3.0
MCU STM32F103VET6(72MHz) STM32F407VGT6(168MHz)
FLASH/RAM 512KB FLASH/64KB RAM 1024KB FLASH/192KB RAM
USB Disk Not support Support
TF card Support(SDIO) Support(SPI3)
WIFI connect USART1 USART1+SPI2
Virtural USB Device Not support Support
Motor interface 5 axis 6 axis(Two Z axis share the same driver)
PWM FAN(s) 1 channel 2 channels
PWM TTL Not Support Support
Independent serial port Not support Support(UART3)
Power TVS protect No Yes
Expansion SD slot Support Not support
MAX31855 interface Support Not support
EEPROM 4KB 4KB
SPI Flash 8M 8M
LCD support MKS TS35/MKS H43/MKS MINI12864 V3/LCD12864/LCD2004 MKS TS35/MKS H43/MKS MINI12864 V3/LCD12864/LCD2004
Firmware Marlin 2.0.x, Klipper Marlin 2.0.x, Klipper, Reprap firmware(MKS version)

Note: As MKS Robin Nano V2.0 doesn't has an independent serial port, so if using with the MKS H43, V2.0 cannot work with Wifi module, but V3.0 can make it.

Hardware

The hardware design is openned source on : https://github.com/makerbase-mks/MKS-Robin-Nano-V3.X/tree/main/hardware

Firmware

The factory firmware of Nano V3 is based on Marlin 2.x, actually, we directly use the same respository of Nano V1.2/2.0:https://github.com/makerbase-mks/Mks-Robin-Nano-Marlin2.0-Firmware. Just modify the type of motherboard to compile the related firmware.

Now Nano V3 also supports RepRapFirmware (RRF). For details, please refer to:https://github.com/makerbase-mks/RepRapFirmware-for-MKS-Boards

Nano V3 has supported klipper firmware. For details, please refer to:https://github.com/makerbase-mks/Klipper-for-MKS-Boards

Note

mks_link

About

Robin nano V3 is an upgraded version of Robin Nano V2.0. The upgrade changes are quite large, including upgrading the MCU to the M4 core, and adding support for USB disk.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published