Skip to content

Efficient reliable UDP unicast, UDP multicast, and IPC message transport - .NET port of Aeron

License

Notifications You must be signed in to change notification settings

malat/Aeron.NET

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Aeron.NET

NuGet

A .NET port of the Aeron Client.

Aeron is an efficient reliable UDP unicast, UDP multicast, and IPC message transport.

Performance is the key focus. Aeron is designed to have the highest throughput with the lowest and most predictable latency possible of any messaging system. Aeron is designed not to perform any allocations after the initial set-up, this means less time will be spent garbage collecting and as a result, latency will be kept down.

Getting Started

Aeron comes in two parts: the media driver and the client.

Architecture Overview

Media Driver

The driver runs in its own process and communicates with the client directly via shared memory. It sends and receives messages across the network to other drivers or routes messages to other clients on the same host.

To run the media driver, you will need Java 8 JRE installed.

There is a nuget package that contains the driver:

PM> Install-Package Aeron.Driver

It will create a directory in your project with a bat file to launch the driver.

Or if you've got the source, run:

driver/start-media-driver.bat

Client

The client can be built from source or installed from nuget: https://www.nuget.org/packages/Aeron.Client/

PM> Install-Package Aeron.Client

Usage

The full example is here.

Publisher

Used to send messages to a specified channel & stream.

const string channel = "aeron:ipc";
const int streamId = 42;

UnsafeBuffer buffer = new UnsafeBuffer(new byte[256]);

using(Aeron aeron = Aeron.Connect())
using(Publication publisher = aeron.AddPublication(channel, streamId)) {
  int messageLength = buffer.PutStringWithoutLengthUtf8(0, "Hello World!");
  publisher.Offer(buffer, 0, messageLength);
}

Fragment Handler

A fragment handler is a delegate used for processing data that is has been received. The buffer will either contain a whole message or a fragment of a message to be reassembled.

static void PrintMessage(IDirectBuffer buffer, int offset, int length, Header header)
{
  var message = buffer.GetStringWithoutLengthUtf8(offset, length);
  Console.WriteLine($"Message Received: '{message}'");
}

Subscriber

A subscriber is used to register interest in messages from a publisher on a specific channel & stream. It uses a fragment handler to process the received messages.

using(Subscription subscriber = aeron.AddSubscription(channel, streamId)) {
  while(subscriber.Poll(PrintMessage, 1) == 0) {  
      Thread.Sleep(10);
  }
}

Samples

Here are some of the samples that come with Aeron. Before running the samples, they need to be built (you will need Visual Studio 2015 installed). Run:

scripts/build.bat

Hello World

This samples sends and receives a hello world message. Make sure the media driver is running and run the following batch script:

scripts/hello-world.bat

You should see something like:

Received message (Hello World!) to stream 42 from session 42d2f651 term id de97c9e0 term offset 0 (11@32)
Press any key to continue...

The source code is here.

Throughput

This sample shows the overall throughput of the client and driver. It sends messages via aeron:ipc which is designed for interprocess communication. Make sure the media driver is running and run the sample:

scripts/throughput.bat

It runs 2 threads which publish and subscribe 32-byte messages and every second prints out the number of messages & total number of bytes that were sent/received.

Duration 1,001ms - 14,047,600 messages - 449,523,200 bytes
Duration 1,000ms - 14,031,801 messages - 449,017,632 bytes
Duration 1,001ms - 15,054,055 messages - 481,729,760 bytes
Duration 1,000ms - 14,678,982 messages - 469,727,424 bytes

The source code is here.

Ping/Pong

This sample show the latencies for a batch of messages. Make sure the media driver is running and start pong which listens for messages and will reply back to each message:

scripts/pong.bat

Then start ping which send messages with the current time to pong and then records the latency when it receives a response to that message.

scripts/ping.bat

After 1,000,000 messages have been sent, you'll be presented with a histogram.

Histogram of RTT latencies in microseconds.
       Value     Percentile TotalCount 1/(1-Percentile)

       9.391 0.000000000000          1           1.00
      11.383 0.100000000000      11404           1.11
      11.663 0.200000000000      25421           1.25
      11.951 0.300000000000      43399           1.43
      11.951 0.400000000000      43399           1.67
      15.647 0.500000000000      52070           2.00
      15.935 0.550000000000      57140           2.22
      16.215 0.600000000000      64190           2.50
      16.511 0.650000000000      68864           2.86
      17.071 0.700000000000      71236           3.33
      17.647 0.750000000000      82369           4.00
      17.647 0.775000000000      82369           4.44
      17.647 0.800000000000      82369           5.00
      17.935 0.825000000000      90885           5.71
...
    5013.503 0.999989318848      99999       93622.86
    5021.695 0.999990844727     100000      109226.67
    5021.695 1.000000000000     100000
#[Mean    =       15.195, StdDeviation   =       46.974]
#[Max     =     5021.695, Total count    =       100000]
#[Buckets =           24, SubBuckets     =         2048]

Which you can upload to http://hdrhistogram.github.io/HdrHistogram/plotFiles.html to create a nice chart:

Latency Histogram

The source code is here and here.

Building from Source

You will need Visual Studio 2015 installed.

  1. Open src/Adaptive.Aeron.sln.
  2. Click Build -> Build Solution.

Note: For best performance, build in x64 release mode and run without the debugger attached.

More Information

The best place for more information is the Aeron Wiki

![Gitter](https://badges.gitter.im/Join Chat.svg) To chat with other Aeron users and the contributors.

About

Efficient reliable UDP unicast, UDP multicast, and IPC message transport - .NET port of Aeron

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C# 99.8%
  • Batchfile 0.2%