-
Notifications
You must be signed in to change notification settings - Fork 2
ADT Files
ADT Files contain the actual terrain information (height maps, texturing, WMOs, doodads, etc) required by the client to render the static parts of the terrain. They use a chunked file structure like WDT Files. Each ADT File contains 256 (16x16) map tiles (or map chunks). Each map tile is 33.3333 yards on each side, making the size of the map block in an ADT file 533.3333 yards on each side in total. As every WDT File can reference 64x64 ADT map blocks, the whole map is approximately 34133.33 yards on each side.
| Identifier | MVER |
|---|---|
| Length | 4 bytes |
This chunk specifies the format version. All ADT Files in 1.12.X have Version 18.
| Identifier | MHDR |
|---|---|
| Length | 64 bytes |
The Header chunk contains offsets to various other chunks. All offsets are relative to the start of the MHDR data block
00h uint32 flags; //Known Values: 1 = contains MFBO
04h uint32 offsMCIN;
08h uint32 offsMTEX;
0Ch uint32 offsMMDX;
10h uint32 offsMMID;
14h uint32 offsMWMO;
18h uint32 offsMWID;
1Ch uint32 offsMDDF;
20h uint32 offsMODF;
24h uint32 offsMFBO; // this is only set if flags &1.
28h uint32 offsMH2O;
2Ch uint32 offsMTFX;
30h uint32[4] unused;
| Identifier | MCIN |
|---|---|
| Length | 4096 bytes |
This is a lookup table containing absolute offsets and sizes for every map tile in the file. There are 16x16 = 256 entries of 16 bytes each:
00h uint32 offsMCNK // absolute offset.
04h uint32 size // the size of the MCNK chunk, this is refering to.
08h uint32 flags // these two are always 0. only set in the client.
0Ch uint32 asyncId
| Identifier | MTEX |
|---|---|
| Length | variable |
A list of zero-terminated file names for the textures used in this map.
| Identifier | MMDX |
|---|---|
| Length | variable |
A list of zero-terminated file names for the doodads / models used in this map.
| Identifier | MMID |
|---|---|
| Length | variable |
uint32 offsets into the MMDX chunk for every doodad.
| Identifier | MWMO |
|---|---|
| Length | variable |
A list of zero-terminated file names for the WMOs used in this map.
| Identifier | MWID |
|---|---|
| Length | variable |
uint32 offsets into the MWMO chunk for every doodad.
| Identifier | MDDF |
|---|---|
| Length | nDoodad * 36 bytes |
Placement Information for Doodads
00h uint32 mmidEntry; // references an entry in the MMID chunk, specifying the model to use.
04h uint32 uniqueId; // this ID should be unique for all ADTs currently loaded. Blizzard has these unique for the whole game.
08h float[3] position;
14h float[3] rotation; // degrees.
20h uint16 scale; // 1024 is the default size equaling 1.0f.
22h uint16 flags; // values from enum MDDFFlags.
| Identifier | MODF |
|---|---|
| Length | nWMO * 64 bytes |
Placement Information for World Map Objects
00h uint32 mwidEntry; // references an entry in the MWID chunk, specifying the model to use.
04h uint32 uniqueId; // unique ID for the whole map.
08h float[3] position;
14h float[3] rotation; // same as in MDDF.
20h float[3] lowerBounds; // these two are position plus the wmo bounding box.
2Ch float[3] upperBounds; // they are used for defining when if they are rendered as well as collision.
38h uint16 flags;
3Ah uint16 doodadSet; // which WMO doodad set is used.
3Ch uint16 nameSet; // which WMO name set is used. Used for renaming goldshire inn to northshire inn while using the same model.
3Eh uint16 padding;
| Identifier | MCNK |
|---|---|
| Length | 128 byte header + variable data |
After the general information above 256 MCNK chunks follow. Each of these has a header followed by subchunks. Subchunks mostly behave like normal file chunks, except for some flakyness in their chunk size values. The header looks like this:
00h uint32 flags; // 1h=has MCSH, 2h=impassible, 4h=River, 8h=Ocean, 10h=Magma, 20h=Slime, 40h=has MCCV
04h uint32 IndexX;
08h uint32 IndexY;
0Ch uint32 nLayers; // maximum 4
10h uint32 nDoodadRefs;
14h uint32 ofsMCVT; // offsets to various chunks. Relative to the beginning of the MCNK Chunk
18h uint32 ofsMCNR;
1Ch uint32 ofsMCLY;
20h uint32 ofsMCRF;
24h uint32 ofsMCAL;
28h uint32 sizeAlpha;
2Ch uint32 ofsMCSH; // only with flags&0x1
30h uint32 sizeShadow;
34h uint32 areaid;
38h uint32 nMapObjRefs;
3Ch uint32 holes;
40h uint2[8][8] ReallyLowQualityTextureingMap; // the content is the layer being on top, I guess.
50h uint32 predTex; // ???
54h uint32 noEffectDoodad; // ???
58h uint32 ofsMCSE;
5Ch uint32 nSndEmitters; //will be set to 0 in the client if ofsSndEmitters doesn't point to MCSE!
60h uint32 ofsMCLQ;
64h uint32 sizeLiquid; // 8 when not used; only read if >8.
68h float[3] position;
74h uint32 ofsMCCV; // only with flags&0x20, had uint32 textureId;
78h uint32 ofsMCLV; // introduced in Cataclysm
7Ch uint32 unused; // currently unused
About the holes in the terrain: This is a bitmapped field, the least significant 16 bits are used row-wise in the following arrangement with a 1 bit meaning that the map chunk has a hole in that part of its area: 0x1 0x2 0x4 0x8 0x10 0x20 0x40 0x80 0x100 0x200 0x400 0x800 0x1000 0x2000 0x4000 0x8000
| Identifier | MCVT |
|---|---|
| Length | 580 bytes |
These are the actual height values for the 9x9+8x8 vertices. 145 floats in the following order/arrangement:. The values in here are only relative to the position given in the corresponding MCNK chunk.
1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17
18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 33 34
35 36 37 38 39 40 41 42 43
44 45 46 47 48 49 50 51
52 53 54 55 56 57 58 59 60
61 62 63 64 65 66 67 68
69 70 71 72 73 74 75 76 77
78 79 80 81 82 83 84 85
86 87 88 89 90 91 92 93 94
95 96 97 98 99 100 101 102
103 104 105 106 107 108 109 110 111
112 113 114 115 116 117 118 119
120 121 122 123 124 125 126 127 128
129 130 131 132 133 134 135 136
137 138 139 140 141 142 143 144 145
WoW uses Squares out of 4 of the Outer(called NoLoD)-Vertices with one of the Inner(called LoD)-Vertices in the Center:
1 2
10
18 19
| Identifier | MCNR |
|---|---|
| Length | 435 bytes + 13 bytes of unknown data |
9x9 + 8x8 surface normals, laid out as in the MCVT chunk.
int8[3] normal; // normalized. X, Y, Z. 127 == 1.0, -127 == -1.0.
This chunk has 13 bytes of unknown data at the end. The chunk size only covers the normals, though.
| Identifier | MCLY |
|---|---|
| Length | 1-4 layers * 16 bytes |
These are texture layer definitions for this map chunk. 16 bytes per layer, up to 4 layers. Every texture layer other than the first will have an alpha map to specify blending amounts. The first layer is rendered with full opacity. To know which alphamap is used, there is an offset into the MCAL chunk. That one is relative to MCAL. You can animate these by setting the flags. Only simple linear animations are possible. You can specify the direction in 45° steps and the speed. The textureId is just the array index of the filename array in the MTEX chunk. The effectId links to GroundEffectTexture.dbc. It defines the little detaildoodads as well as the footstep sounds and if footprints are visible.
00h uint32 textureId;
04h uint32 flags;
08h uint32 offsetInMCAL;
0Ch int32 effectId; // (actually int16 and padding)
Flags
Flag Description
---------------------------------------------------------------------------------
0x001 Animation: Rotate 45° clockwise.
0x002 Animation: Rotate 90° clockwise.
0x004 Animation: Rotate 180° clockwise.
0x008 Animation: Make this faster.
0x010 Animation: Faster!!
0x020 Animation: Faster!!!!
0x040 Animation: Animate this texture as told in the other bits.
0x080 This will make the texture way brighter. Used for lava to make it "glow".
0x100 Use alpha map - set for every layer after the first
0x200 Alpha map is compressed
| Identifier | MCRF |
|---|---|
| Length | variable |
A uint32 list of with MCNK.nDoodadRefs + MCNK.nMapObjRefs indices into the file's MDDF and MODF chunks, saying which MCNK subchunk those particular doodads and objects are drawn within. This MCRF list contains duplicates for map doodads that overlap areas. As both, WMOs and M2s are referenced here, they get doodad indices first, then WMOs. If you have a doodad and a WMO in the ADT as well as the MCNK, you will have a {0,0} in MCRF with nDoodadRefs and MCNK.nMapObjRefs being 1.
| Identifier | MCSH |
|---|---|
| Length | 512 bytes |
Shadow map for static shadows on the terrain. Can be left out with the chunk&1 flag not set. The shadow maps work as follows: the shadows are stored per bit as 0 or 1 (off or on) so we have 8 bytes (which equates to 64 values) X 64 bytes (64 values in this case) which ends up as a square 64x64 shadowmap with either white or black. Note that the shadow values come LSB first.
| Identifier | MCAL |
|---|---|
| Length | 0-3 layers * 2048 bytes |
These are alpha maps for additional texture layers beside the base layer. Each layer contains a 64x64 alpha map. There are 2 alpha values per byte, first 4 bits and second 4 bits. Results in 2048 bytes per layer.
| Identifier | MCLQ |
|---|---|
| Length | ??? |
The size of the chunk is in the mapchunk header. The type of liquid is given in the mapchunk flags, also in the header. This information is old and incomplete as well as maybe wrong. The first two floats specify the minimum and maximum liquid height level. After them comes a 9x9 height map for the water with the following format per vertex:
0x00 int16 ?
0x02 int16 ?
0x04 float height value
The unknown int values might be color or transparency info, or something entirely different... Most frequently they are 0. Followed by 8x8 bytes of flags for every liquid "tile" between the 9x9 vertex grid. The value 0x0F means do not render. (the specific flag for this seems to be 8 but I'm not sure - but it fixes some places where there was extra "water" sticking into the rest of the scenery) Finally, 0x54 bytes of additional data, no idea what it's used for.
| Identifier | MCSE |
|---|---|
| Length | ??? |
This is not well understood. Struct from WoWDev Wiki:
00h uint32 soundPointID;
04h uint32 soundNameID;
08h float[3] pos;
0Ch
10h
14h float minDistance;
18h float maxDistance;
1Ch float cutoffDistance;
20h uint16 startTime;
22h uint16 endTime;
24h uint16 groupSilenceMin;
26h uint16 groupSilenceMax;
28h uint16 playInstancesMin;
2Ah uint16 playInstancesMax;
2Ch uint16 loopCountMin;
2Eh uint16 loopCountMax;
30h uint16 interSoundGapMin;
32h uint16 interSoundGapMax;
Back to Client File Formats