TRYAK - Sonoé iEast - API Manual

This is a translation from French performed by Google. OriginaPDF is here

The current version is to only a very limited extent reviewed and improved with regards to the Google translation.

The same protocol is used by the Multiroom receivers branded, Roxcore, sold by Kjell&Company in Scandinavia. When searching internet for these devices, one can find out that the above brands are OEM for a company called Linkplay. This explains why there are a number of devices supporting the same REST like interface.

A list of devices controlled by this protocol is here.

Presentation and list of interfaces

Overview

In addition to being compatible with the DLNA and Airplay streaming protocols, Sonoé IEast also offers local file playback via Mirco SD card, Multi-room, audio streaming controon different Sonoé iEast, transmission User-defined read control and other functions, all with User-friendly controand wireless WIFI Audio technology.

In addition, we developed an API allowing interaction with Sonoé IEast mainly via http-type query.

The HTTP (get method) request is sent to the embedded Web server in Sonoé iEast, it is analyzed, an a response is returned by Sonoé iEast and the corresponding function is executed. The query and reply issued by Sonoé iEast is in JSON format.

Query Format http: command is:

Httpapi.asp? Command = setPlayerCmd: play: uri

http://a.b..c.d/httpapi.asp = ********? Command = or Httpapi.asp? Command = setPlayerCmd: play

Example: Play Internet Radio

IP address of Sonoé iEast: 10.10.10.254

Command: Play

http://10.10.10.254/httpapi.asp?command=setPlayerCmd:play:http://pr320.pinguinradio.nl/listen.pls

The IP address of Sonoé iEast can be obtained by looking upnp such as 10.10.10.254 (url assume the following interfaces 10.10.10.254 IP)

Example: Play from NAS

http:///10.10.10.254/httpapi.asp?command=setPlayerCmd:play:http://NasAddress/fichier.mp3

The current specification is dated: 15/05/2016

Get Sonoé iEast Information

http://$ReceiverIpAddress/httpapi.asp?command=getStatus

Description: Obtain basic information about the device, such as ssid, the version of Equipment, IP wifi and IP Ethernet, etc.
Supported Formats: JSON
HTTP Request: GET
Command: getStatus

Response:

{
"Language": "en_us",
"Ssid": "FA5100_a4dc",
"Firmware": "WIFIAudio.multil_room.1.2.20140324",
"Builddate": "release",
"Release": "20140324",
"Group": "",
"Expired": "0",
"Internet": "0",
"Uuid": "FF123456nnnnnnnnnnnn",
"Netstat": "0",
"Essid": "",
"Apcli0": "",
"Eth2": "192.168.120.112",
"Hardware": "Wi Mu-A03",
......
}

Description of Fields:

Fields	Description
Language	Language
SSID	SSID equipment
Firmware	Software version
Build	Note: Actual output is output, debug, save Three cases, indicates the version of the type generally press.
Release	Date of Release
Group	Name of the group
Expired	Outdated software flag: 0: valid; 1: Out of date
MAC	Mac Address
Internet	Internet access: 0; 1: true
Uuid	UDID device, the first 8 bytes of the project ID, followed by the device's unique identifier
Netstat	WIFI connection state. 0: not connected 1: transient state 2: Connected
Essid	WIFI router to connect to, use the command GetStatus returned using hex coded hex to support the transmission of special characters.
Apcli0	The IP address of WIFI
Eth2	IP address of the Ethernet
Hardware	Hardware version
Project	Name of the project
VersionUpdate	New version available
NewVer	Available version number
Mcu_ver	The version MCU, if 0 indicates the absence of MCU
DeviceName	Name upnp and airplay of Sonoé iEast
Temp_uuid	Temp uuid, will change after boot up
Streams	Bit: 0 if MFI airplay activated 1 airplay activated 2 if DLNA enabled 3 if Qplay 10 if TTPod 11 if DoubanFM 14 if QingTing 15 if ximalaya 16 TuneIn 17 iHeartRadio 18 Tida 21 Pandora 22 Spotify
Streams_all	The audio streams to be displayed showing the user interface
External	Have a light control
Preset_key	Presets key number
Plm_support	0 LineIn (Aux) 1 BT 2 optical
WifiChannel	WiFi Channel WiFi bands
AP_clients	number of AP clients
battery	1 means battery is in charging
Battery_percent	0 to 100
Securemode	WiFi secured or not
psk	If the WiFi is secured, allows to fill in the password
usb_storagesize	U disk storage size
usb_freesize	Udisk free size
mmc_storagesize	Mmc storage size , otherwise this one, there are no T cards
mmc_freesize	Mmc free size
Part1_storage	User1 part in ROM, storage size
Part1_free	User1 part in ROM, free size
Part2_storage	User2 part in ROM, storage size
Part2_free	User2 part in ROM, free size

Get system log download page

URInterface: http://$ReceiverIpAddress/httpapi.asp?command=getsyslog
Description: No use? But you can go to http://$ReceiverIpAddress/data/sys.log to download the log. Fileformat is unknown.
Supported Formats: non-json form value
HTTP Request: GET
Command: getsyslog
Response:

<!doctype html>
<html>
  <head>
    <meta charset="utf-8"> </head>
  <body>
    <DIV><span id="dl">&nbsp;&nbsp;&nbsp;&nbsp;<a href=data/sys.log>download</a><hr></span></DIV>
  </body>
</html>

Network connection configuration WIFI

Get list of WIFI networks Available (SSID)

URInterface: http://$ReceiverIpAddress/httpapi.asp?command=wlanGetApList
Description: List all wifi networks (SSID) identified by Sonoé iEast.
Supported Formats: JSON
HTTP Request: GET
Command: wlanGetApListEx
Response: (here 3 wifi networks)

{"Res": "0", "aplist": [
{"Ssid": "wmmAudio_a7b8", "bssid": "00: 22: 6c: 00: a7: b8", "rssi"
Th ":" OPEN "," encry ":" NONE "," extch ":" 1 "},
(Ssid): "WIIMU_Network", "bssid": "20: dc: e6: cb: 7e: 78", "rssi"
Th ":" WPA2PSK "," encry ":" AES "," extch ":" 0 "},
{"Ssid": "WIFIAudio_29b0", "bssid": "00: 22: 6c: 16: 29: b0", "rssi": "65"
Th ":" OPEN "," encry ":" NONE "," extch ":" 0 "}]}

Description of fields:

Fields	Description
res	Back to the list
Aplist	SSID List
Ssid	Wifi visible name, wlanGetApListEx returned ssid Hexadecimal encoding to support speciacharacters and the Chinese.
Bssid	Mac Address
Rssi	Signal Strength
channel	Wifi channel
auth	Encrypt
encry	Encryption Type
Extch	?

Wifi network connection

URInterface: http://$ReceiverIpAddress/httpapi.asp?command=wlanConnectAp:ssid:channel:auth:encry : Pwd: chext

Description: Allows Sonoé iEast to be connected to a wifi network selected.
Supported Formats: JSON
HTTP Request: GET
Command: WlanConnectApEx: SSID = xxx: ch = n: auth = xxx: encty = xxx: pwd = xxx: chext n =

Parameter	Mandatory?	Type	Description
Ssid	True	string	When connecting the wifi name ssid, wlanConnect ApEx, in hexadecimal code transmission
channel	True	string	Wifi channel to connect, optional 1-12
auth	True	string	Whether the encryption is OPEN or WPA2PSK
Encry	True	string	Encryption type, AES or NONE
Pwd	True	string	Password Wifi, type the password is OPEN NONE; When wlanConnect ApEx, when transmitting hexadecimacode, if the Password is empty, you do not have to enter.
Chext	True	string	1 to fill

Response: Does not return any value, you must call the connection state of The query interface, to determine if the connection was successful.

Connect to a hidden wifi network

URInterface: http://$ReceiverIpAddress/httpapi.asp?command=wlanConnectHideApEx:ssid:pwd

Description: Allows Sonoé iEast to be connected to a wifi network selected. The ssid and pwd must be in hexadecimal format.
Supported Formats: JSON
HTTP Request: GET
Command: wlanConnectHideApEx: SSID: pwd

State request for wifi connection

URInterface: http://$ReceiverIpAddress/httpapi.asp?command=wlanGetConnectState

Description: Allows you to request the status of the Sonoé iEast wifi connection.
Returns a non-json form value
HTTP Request: GET
Command: wlanGetConnectState
Response: OK

Description of fields:

Field	Description
PROCESS	Liaison Process
PAIRFAIL	Password Error
FAIL	Error, then captured state then 10s continuously Captured, in order to ensure that this state is stable, otherwise it There may be only a temporary cut
OK	Connection is successful

Hide or show SSID

URInterface: http://$ReceiverIpAddress/httpapi.asp?command=setHideSSID:1

Description: Allows you to request a SSID to be hidden or shown Tested on an August WR320
Returns a non-json form value
HTTP Request: GET
Command: setHideSSID:1
Command: setHideSSID:0
Response: OK

Get built-in WiFi info

URInterface: http://$ReceiverIpAddress/httpapi.asp?command=getNetwork

Description: Allows you to request information about the built in AP Tested on SACKit MOVEit firmware 3.6.4105 release 20170205
Supported Formats: JSON
HTTP Request: GET
Command: getNetwork

Response:

{
  "securemode": "1",
  "auth": "WPAPSKWPA2PSK",
  "encry": "AES",
  "psk": "wifipassword"
}

Field	description
securemode	unknown, maybe if authentication is enabled
auth	security protocol used for authentication
encry	encryption standard used for authentication
psk	encryption key for the network

Music Player and Control

Reading Status

URInterface: http://$ReceiverIpAddress/httpapi.asp?command=getPlayerStatus

Description: Allows you to query Sonoé iEast to find out: The currently playing song, the title of the song and other metadata

Supported Formats: JSON
HTTP Request: GET
Command: getPlayerStatus Response:

{
"Type": "0",
"Ch": "0",
"Mode": "10", "
"Loop": "0", "
"Status": "play",
"Curpos": "12900",
"Totlen": "229000",
"Title": "736865",
"Artist": "47726f6f766520436f766572616765",
"Album": "xxxxxxxxxx",
"Plicount": "1",
"Plicurr": "1",
"Flight": "90",
"Mute": "0",
}

Field	description
type	0: Normal Main speaker Loudspeaker 1: Sub-Speakers
ch	Channel 0 indicates stereo, 1 left channel, 2 of the right channel
mode	Playback Mode PLAYER_MODE_NONE 0 PLAYER_MODE_AIRPLAY 1 PLAYER_MODE_DLNA 2 PLAYER_MODE_WIIMU 10 PLAYER_MODE_WIIMU_LOCAL 11 PLAYER_MODE_WIIMU_STATION 12 PLAYER_MODE_WIIMU_RADIO 13 PLAYER_MODE_WIIMU_SONGLIST 14 PLAYER_MODE_WIIMU_MAX 19 PLAYER_MODE_HTTP 20 PLAYER_MODE_HTTP_LOCAL 21 PLAYER_MODE_HTTP_MAX 29 PLAYER_MODE_ALARM 30 PLAYER_MODE_LINEIN 40 PLAYER_MODE_BT 41 PLAYER_MODE_EXT_LOCAL 42 PLAYER_MODE_OPTICAL 43 PLAYER_MODE_LINEIN_MAX 49 PLAYER_MODE_MIRROR 50 PLAYER_MODE_TALK 60 PLAYER_MODE_SLAVE 99
loop	Song playback modes playlist: 0: 1 play order: Single Cycle 2: Random Playback 3: List Cycle
eq	The current equalizer settings
status	Current status: play, load, stop, pause
curpos	Current location, in milliseconds
totlen	The total length, in milliseconds
Title	Title, hexadecimal code, the name of the song; unknown if The song name displays the file name or the display unknown
Artist	Hexadecimal coding of artists
Album	Album name, hexadecimal encoding
plicount	The total number of playlists
plicurr	The current track of the playlist index
vol	Current volume
mute	Is currently muted

Playing a Playlist

URInterface: http://$ReceiverIpAddress/httpapi.asp?command=setPlayerCmd:playlist:uri:

Description: Allows you to play a playlist with an extension index
Supported Formats: none
HTTP Request: GET
Command: setPlayerCmd: playlist: uri:
Response: OK

Pause / resume playing the current music

URInterface: http://$ReceiverIpAddress/httpapi.asp?command=setPlayerCmd:pause

http://$ReceiverIpAddress/httpapi.asp?command=setPlayerCmd:onepause

http://$ReceiverIpAddress/httpapi.asp?command=setPlayerCmd:resume

Description: Controls the player.
pause: pause current playback
resume: resume playback
onepause: if you pause in the resume, if playback is paused
Supported Formats: none
HTTP Request: GET Controls:
setPlayerCmd: pause
setPlayerCmd: onepause
setPlayerCmd: resume
Response: OK

Playing music

URInterface: http://$ReceiverIpAddress/httpapi.asp?command=setPlayerCmd:play:

Description: Starts playback of a file after one Pause
Supported Formats: none
HTTP Request: GET
Command: setPlayerCmd: play:
Response: OK

Previous song playback

URInterface: http://$ReceiverIpAddress/httpapi.asp?command=setPlayerCmd:prev

Description: Allows you to play back a previous song
Supported Formats: none
HTTP Request: GET
Command: setPlayerCmd:prev
Response: OK

Play next track

URInterface: http://$ReceiverIpAddress/httpapi.asp?command=setPlayerCmd:next

Description: Allows you to play back a previous song
Supported Formats: none
HTTP Request: GET
Command: setPlayerCmd:next
Response: OK

Fast forward and rewind

URInterface: Http://10.10.254/httpapi.asp?command=setPlayerCmd:seek:position

Description: Allows you to play back or fast-forward one piece
Supported Formats: none
HTTP Request: GET
Command: setPlayerCmd:seek:position
Response: OK

Stopping playback

URInterface: http://$ReceiverIpAddress/httpapi.asp?command=setPlayerCmd:stop

Description: Stops the current playback
Supported Formats: none
HTTP Request: GET
Command: setPlayerCmd:stop
Response: OK

Adjusting volume

URInterface: Http://$ReceiverIpAddress/httpapi.asp?command=setPlayerCmd:vol:value

Description: Adjusting the volume of the player, the value is one volume value of 0-100. Speakers will also change the volume Main and under loudspeaker
Supported Formats: none
HTTP Request: GET
Command: setPlayerCmd:vol:value
Response: OK

Mute mode

URInterface: http://$ReceiverIpAddress/httpapi.asp?command=setPlayerCmd:mute:1

Description: Activation of the Mute mode, according to the following parameter Activation = 1 and Deactivation = 0
Supported Formats: none
HTTP Request: GET
Command: setPlayerCmd:mute:1
Response: OK

Set the playback mode

URInterface: http://$ReceiverIpAddress/httpapi.asp?command=setPlayerCmd:loopmode:0

Description: Starts different playback mode.
Available modes:
0 Reading in order
1 Continuous playback
2 Shuffle playback
-1 Continuous play of a song
Supported Formats: none
HTTP Request: SET
Command: setPlayerCmd:loopmode:0
Response: OK

Adjusting the Equalizer Mode

URInterface: http://$ReceiverIpAddress/httpapi.asp?command=setPlayerCmd:equalizer:mode

Description: Adjusts the equalizer.
Available options:
0 Close Equalizer Mode
1 Classic Mode
2 mode Popular
3 mode Jazzy
4 Vocal Mode
Supported Formats: none
HTTP Request: SET
Command: setPlayerCmd: equalizer: mode
Response: OK

Viewing Equalizer Mode

URInterface: http://$ReceiverIpAddress/httpapi.asp?command=getEqualizer

Description: Allows to interrogate the mode device Equalizer in Progress
Supported Formats: none
HTTP Request: GET
Command: getEqualizer
Response: Mode 0/1/2/3/4 (See modes explained in previous paragraf (set) )

Playback Control MicroSD Card

Viewing the File List

URInterface: http://$ReceiverIpAddress/httpapi.asp?command=getLocalPlayList

Description: Get a list of music files on the Disk, the list of network files to return the results
Supported Formats: JSON
HTTP Request: GET
Command: getLocalPlayList

Response:

{
"Num": "2",
"Locallist": [
{
"File": "/ media / sda1 / avrilavigne - tik tok.mp3"
},
{
"File": "/ media / sda1 / Aprilavigne - hush hush.mp3"
}

]
}

Description of fields:

Field	Description
Num	Number of files
locallist	List of files available on disk
file	File path (hexadecimal encoding)

Get file information

URInterface: http://$ReceiverIpAddress/httpapi.asp?command=getFileInfo:index:range

Description: Allows to obtain the detailed information of each of the files, on the basis of the index of each one in the list and from 0. (metadata in hexadecimal encoding).
Supported Formats: JSON
HTTP Request: GET
Command: getFileInfo:index:range

Response: If num is greater than 1, the file info returned is multiple.

{"Num": "2", "infolist": [
{
"Filename": "/ media / sda1 / avrilavigne - hush hush.mp3",
"Totlen": "0",
"Title": "unknown",
"Artist": "unknown",
"Album": "unknown"
},
{
"Filename": "/ media / sda1 / avrilavigne - hush hush2.mp3",
"Totlen": "0",
"Title": "unknown",
"Artist": "unknown",
"Album": "unknown"
}]}

If num is less than 1, the file info return is unique;

{
"Filename": "/ media / sda1 / avrilavigne - hush hush.mp3",
"Totlen": "0",
"Title": "unknown",
"Artist": "unknown",
"Album": "unknown"
}

Description of fields:

Field	Description
filename	File name (hexadecimal encoding)
totlen	Always returns "0"
Title	Song title or unknown (hexadecimacoding)
Artist	Artist of the song or unknown (hexadecimacoding)
Album	Album of the song or unknown (hexadecimacoding)

Playing an Audio File on MicroSD

URInterface: http://$ReceiverIpAddress/httpapi.asp?command=setPlayerCmd:playLocalList:index

Description: Allows you to select a file based on the getLocalPlayList playlists, playing songs automatically.
HTTP Request: GET
Command: setPlayerCmd:playLocalList:index

Get a list of cached files

URInterface: http://$ReceiverIpAddress/httpapi.asp?command=getCacheList

Description: Provides a list of cached files
Supported Formats: JSON
HTTP Request: GET
Command: getCacheList

Response:

{
"Num": "2",
"Cachelist": [
{
"File": "/ media / sda1 / avrilavigne - tik tok.mp3"
},
{
"File": "/ media / sda1 / Aprilavigne - hush hush.mp3"
}

]
}

Description of fields:

Field	Description
num	Number of files
cachelist	List of Cached Files
file	File path (hexadecimal encoding)

Get information about cached files

URinterface http://$ReceiverIpAddress/httpapi.asp?command=getCacheFileInfo:index:range

Description: Allows to obtain the detailed information of each of the files, on the basis of the index of each one in the list and from 0. (metadata in hexadecimal encoding).
Supported Formats: JSON
HTTP Request: GET
Command: getCacheFileInfo:index:range

Response: If num is greater than 1, the fileinfo returned is multiple.


{"Num": "2", "infolist": [
{
"Filename": "/ media / sda1 / avrilavigne - hush hush.mp3",
"Metadata": "unknown",
},
{
"Filename": "/ media / sda1 / avrilavigne - hush hush2.mp3",
"Metadata": "unknown",
}]}

If num is 1, the fileinfo returned is single.

{
"Filename": "/ media / sda1 / avrilavigne - hush hush.mp3",
"Metadata": "unknown",
}

Description of fields:

Field	Description
Filename	File name (hexadecimacoding)
Metadata	Song information or unknown (Hexadecimal encoding)

Multi-Room Management

Get a list of Sonoé iEast available

URInterface: http://$ReceiverIpAddress/httpapi.asp?command=multiroom:getSlaveList

Description of the interface: Allows to obtain the list of the devices using the same communication protocol.
Supported Formats: JSON
HTTP Request: GET
Command: Multiroom:getSlaveList

Response:

{
"Slaves": "1",
"Slave_list": [
{
"Name": "FA5100_a3f4",
"Mask": "0",
"Volume": "90",
"Mute": "0",
"Channel": "0",
"Ip": "10.10.10.100",
"Version": "WIFIAudio.1.2.2321"
}
]
}

Field	Description
Slaves	Number of Sonoé iEast available
Slave_list	Information about each Sonoé iEast case available
name	Name
mask	Case already in Multi-Room mode, Yes = 1, No = 0
Volume	Volume level
Mute	Enable Mute mode, Yes = 1, Off = 0
Channel	Wifi channel
ip	IP address of the Sonoé iEast Boot
version	firmware version

Removing a Sonoé iEast from the multi-room

URInterface: http://$ReceiverIpAddress/httpapi.asp?command=multiroom:SlaveKickout:ip

Description of the interface: Allows to remove from the multiroom mode a device Based on its IP address.
Supported Formats: None
HTTP Request: GET
Command: Multiroom: SlaveKickout: ip
Response: OK

Hide the IP address of a Sonoé iEast

URInterface: http://$ReceiverIpAddress/httpapi.asp?command=multiroom:SlaveMask:ip

Description of the interface: Allows to integrate a multi-room mode a device Based on its IP address. It is thus rendered invisible from the IP network.
Supported Formats: None
HTTP Request: GET
Command: Multiroom:SlaveMask:ip
Response: OK

Releasing a Multi-Room Mode

URInterface: http://$ReceiverIpAddress/httpapi.asp?command=multiroom:SlaveUnMask:ip

Description of the interface: Allows to release from the multi-room mode based on its IP address. It is thus visible on the IP network.
Supported Formats: None
HTTP Request: GET
Command: Multiroom:SlaveUnMask:ip
Response: OK

Individual volume adjustment

URInterface: http://$ReceiverIpAddress/httpapi.asp?command=multiroom:SlaveVolume:ip:volume

Description: Allows you to adjust the individual volume of the each of the devicees via the IP address of the device and the definition of a value going from from 1 to 100. Note: these settings will be lost when deactivating multi-room mode (kickout)
Supported Formats: None
HTTP Request: GET
Command: Multiroom:SlaveVolume:ip:volume
Response: OK

General Volume Adjustment

URInterface: http://$ReceiverIpAddress/httpapi.asp?command=setPlayerCmd:slave_vol:volume

Description: Adjusts the overal volume of the multi-room with the definition of a value ranging from 1 to 100. Note: thesis settings will be lost When disabling multi-room mode
HTTP Request: GET
Command: setPlayerCmd:slave_vol:volume
Response: OK

Individual activation Mute

the URinterface: http://$ReceiverIpAddress/httpapi.asp?command=multiroom:SlaveMute:ip:mute

Description: Enables the Mute on each device via the IP address of the device and by enabling (1) and disabling (0)
Supported formats: None
HTTP Request: GET
Command: Multiroom: SlaveMute:ip:mute
Response: OK

General activation Mute

the URinterface: http://$ReceiverIpAddress/httpapi.asp?command=setPlayerCmd:slave_mute:mute

Description: Enables the muting
HTTP Request: GET
Command: setPlayerCmd: slave_mute: mute
Response: OK

General Mute Disabling

the URinterface: http://$ReceiverIpAddress/httpapi.asp?command=setPlayerCmd:slave_mute:unmute

Description: To disable the mute mode so overal the
Supported formats: None
HTTP Request: GET
Command: setPlayerCmd:slave_mute:unmute
Response: OK

Individual management of the audio signal Right / left

the URinterface: http://$ReceiverIpAddress/httpapi.asp?command=multiroom:SlaveChannel:ip:channel

Description: Enables the Mute on Each of the devices via the IP address of the device and by this parameter to signal right only Channe0 = left and only 1 = Channel signal
HTTP Request: GET
Command: Multiroom:SlaveChannel:ip:channel
Response: OK

Overal management of the audio signal Right / left

the URinterface: http://$ReceiverIpAddress/httpapi.asp?command=setPlayerCmd:slave_channel:channel

Description: Enables the Mute on Each of devices via the IP address of the device and by this parameter to signal right only Channel= 0 and left signal only 1 = Channel
HTTP Request: GET
Command: setPlayerCmd:slave_channel:channel
Response: OK

Individual definition of the device Name

the URinterface: http://$ReceiverIpAddress/httpapi.asp?command=multiroom:SlaveSetDeviceName:%ip:%s

Description: individual settings of the name of the square in mode UPnP / Airplay
HTTP Request: GET
Command: Multiroom: SlaveSetDeviceName: ip%:%s
Response: OK

Disabling Multi-Room

the URinterface: http://$ReceiverIpAddress/httpapi.asp?command=multiroom:Ungroup

Description: Disables the multi-room mode
HTTP Request: GET
Command: Multiroom : Ungroup
Response: OK

Control parameter network

Opening the WPS server

the URinterface: http://$ReceiverIpAddress/httpapi.asp?command=wpsservermode

Description: Opening of WPS standby server integration of new device
HTTP Request: GET
Command: wpsservermode
Response: OK

Closing the WPS server

the URinterface: http://$ReceiverIpAddress/httpapi.asp?command=wpscancel

Description: Opening of WPS standby server integration of new devices
HTTP Request: GET
Command: wpscancel
Response: OK

WPS Client opening for device

URL: http://$ReceiverIpAddress/httpapi.asp?command=wpsclientmode

Description: WPS server to integrate opening a device
HTTP Request: GET
Command: wpsclientmode
Response: OK

Change the SSID name of the device

the URinterface: http://$ReceiverIpAddress/httpapi.asp?command=setSSID:value

Description: Sets a new network name (SSID) of the device in hexadecimaformats
HTTP Request: GET
Command: setSSID:value
Response: No response. The system restarts partner after the call.

Setting the password WIFI

the URinterface: http://$ReceiverIpAddress/httpapi.asp?command=setNetwork:1:password

Description: Setting a new password using letters and / or numbers and crossing of setnetwork setting: 1 (Securing WIFI network (WPAPSK) in contrast, setnetwork: 0 (oPEN) Makes the network open WIFI.
HTTP Request: GET
Command: setnetwork: 1: password
Response: No response the system restarts after the validation of the new password. password The Therefore must reconnect to the WiFi network and enter the new password. password.

Restoring the factory setting

the URinterface: http://$ReceiverIpAddress/httpapi.asp?command=restoreToDefault

Description: To restore factory settings, erasing defined configurations. The device restarts.
Supported Formats: No HTTP Request: GET
Command: restoreToDefault the response back: OK

Restarting the device

the URinterface: http://$ReceiverIpAddress/httpapi.asp?command=reboot

Description: Allows you to reboot the device
Supported Formats: None
HTTP Request: GET
Command: reboot
Response: OK

Programming stop device (switching off)

URInterface: http://$ReceiverIpAddress/httpapi.asp?command=setShutdown:sec

Description: Used to turn off the device time immediately sec0 gold SECN n milliseconds
HTTP Request: GET
Command: setShutdown:sec
Response: OK

Show time left to shut down

URInterface: http://$ReceiverIpAddress/httpapi.asp?command=getShutdown

Description: Shows the current information about time left to shut down (in seconds)
HTTP Request: GET
Command: getShutdown
Response: number (in seconds)

Stop WIFI signa

the URinterface: http://$ReceiverIpAddress/httpapi.asp?command=setPowerWifiDown

Description: Turns off the WIFI signadevice
HTTP Request: GET
Command: setPowerWifiDown
Response: OK

Setting the MCU display

the URinterface: http://$ReceiverIpAddress/httpapi.asp?command=MCUDisplayText:xxxx

Description: Manage a MCU text display in the limit of 32 characters.
Supported Formats: None
HTTP Request: GET
Command: MCUDisplayText:xxxx
Response: OK

Setting the name of device

URL http://$ReceiverIpAddress/httpapi.asp?command=setDeviceName:%s

Description: Sets the name UPnP, DLNA and Airplay of the device (Hex)
HTTP Request: GET
Command: setDeviceName:%s
Response: OK

Firmware Update

Update search

the URinterface: http://$ReceiverIpAddress/httpapi.asp?command=getMvRemoteUpdateStartCheck

Description: Search for the firmware updates available
Supported Formats: No
HTTP Request: GET
Command: getMvRemoteUpdateStartCheck
Response: OK

Update availability

the URinterface: http://$ReceiverIpAddress/httpapi.asp?command=getMvRemoteUpdateStatus

Description: Allows you to check if an update is available. May need to call Severatimes Because The device Itself need to query the server if updates are available.
Supported Formats: No
HTTP Request: GET
Command: getMvRemoteUpdateStatus

Response:

Value	Meaning
40	Improved package
10	Being Analyzed
others	update Refusal

Notification updates

URL: http://$ReceiverIpAddress/httpapi.asp?command=getMvRemoteUpdateStart

Description: After calling the interface, if a new version is available, the device starts to download updates. At the end of the download, the update process starts.
WARNING: DO NOT POWER OFF DURING THIS PROCESS!!
Supported Formats: No
HTTP Request: GET
Command: getMvRemoteUpdateStart
Response: OK

Status of the update process

the URinterface: http://$ReceiverIpAddress/httpapi.asp?command=getMvRemoteUpdateStatus

Description: Get the download progress.
Supported formats: None
HTTP Request: GET
Command: getMvRemoteUpdateStart
Response:

Value	Meaning
10	Under review
21	The verification of the downloaded update file failed
22	Downloading the update file failed
23	The verification of the downloaded update file failed
25	Start downloading
27	Download complete
30	Downloading and verification completed

Download progress

the URinterface: http://$ReceiverIpAddress/httpapi.asp?command=getMvRomBurnPrecent

Description: Status of updating
Supported Formats: None
HTTP Request: GET
Command: getMvRemoteUpdateStart

Response:

{
" status ":" 0 "," progress ":" 50 "
}

Fields	Meaning
status	State
progress	Progress between 0 to 100%

Clock and Timer

Time synchronization

If the device is online, the device using the system time synchronization SNTP, Taking Time UTC, so if there is not UTC, for example, Paris is GMT+ 8, the appellant must be converted to UTC, Then calsetAlarmClock.

If the device is online, you can use to adjust the system time:

http://$ReceiverIpAddress/httpapi.asp?command=timeSync:YYYYMMDDHHMMSS

Set the timer

the URinterface: http://$ReceiverIpAddress/httpapi.asp?command=setAlarmClock:n:trig:op:time[:day][:url]

Description: Hooks que la indicates field is required, for example, is set to trip at a daily alarm instruction

http://$ReceiverIpAddress/httpapi.asp?command=setAlarmClock:n:trig:op:time:url the day is not-have

HTTP Request : GET
Command: setAlarmClock: n: trig: op: time [: day] [: url]

Fields	Description
not	Can be from 0 to 2, Max 3 alarms
trig	Trigger mode: 0 - No alarm (setAlarmClock: n: 0) 1 Once only 2 Daily 3 Weekly 4 Weekly, Extended Mode 5 All month
op	Action to take 0 - Running the script 1 - Playing music 2 - Stop playback
time	Format %% 02h 02m 02s% Such as 180101 for 6:01:01 pm start time: 00-23 minutes and seconds 00 to 59
day	Format% 04M% 02s% 02J (M: month / s week / d: day) For example 20,140,101, qui est 01 months assignment to 12 Mode Only once - no setting can mode Everyday - No feasible setting mode every week - value of 00 -06 (2 bytes) - 00 Sunday 06 Saturday day. mode Weekly, extended mode The first byte Represents the specific day of the value of triggering actions (0 Sunday to Saturday 6). if ee is set to 1 (ie, Attributed To 7F) indicates que le input power of a day. Note must be two bytes between 1 and 31. If the trigger once, Then set% 04d% 02d% 02d, for example 20,140,101, qui est 01 months to 12 assignment
url	localize the script maximum length of 256 bytes

Remaining playing time (Timer)

the URinterface: http://$ReceiverIpAddress/httpapi.asp?command=getAlarmClock:n

Field	Description
n	Can be from 0 to 2, Max 3 alarms. Defined: return { "enable": "1"} Undefined: return { "enable": "0"}
trigger	"%d"
operatio	"%d"
Time	Format% 02h% 02m% 02s mode Just ounce - "Date": "% 02d:% 02d:% 02d" or no mode Every week (extended mode included) - "WEEK_DAY": "%d" mode Every day - "day" "% 02d "" time ":"% 02d: 02d:% 02d "
path	"%s"

Off alarm

the URinterface: http://$ReceiverIpAddress/httpapi.asp?command=alarmStop

Description: Stop Programmed alarm
Supported formats: None
HTTP Request: GET
Command: alarmStop
Response: OK

Source Line IN

Read Access Line IN

the URinterface: http://$ReceiverIpAddress/httpapi.asp?command=setPlayerCmd:switchmode:%s

Description: Access to the different reading mode as possible in the qui Line In. line-in : Switch to AUX mode, optical : Go SPDIF mode UDISK : Go to the Micro SD reader wifi : GB WIFI mode
HTTP Request: GET
Command: setPlayerCmd:switchmode:%s
Response: OK

Simulation Instruction IO

Instruction GPIO pullup

the URinterface: http://$ReceiverIpAddress/httpapi.asp?command=IOSimuPullUp:%d

Description: Allows management forced the GPIO
0: nReload not recommended, Generally used for WPS and factory reset
11: GPIO_nReady (only A02)
12: GPIO_DCD
14: GPIO_RIN
18: GPIO1 (only A11)
17: GPIO2 (only A11)
Command: IOSimuPullUp:%d

Instruction pulldown GPIO

the URinterface: http://$ReceiverIpAddress/httpapi.asp?command=IOSimuPullDown:%d

Description: Delete GPIO management forced
Command: IOSimuPullDown:%d

GPIO reading

the URinterface: http://$ReceiverIpAddress/httpapi.asp?command=IOSimuRead:%d

Description: Read GPIO leve
Command: IOSimuRead:%d

Analog controlkey input

the URinterface: http://$ReceiverIpAddress/httpapi.asp?command=IOSimuKeyIn:%d

Description: References MCU settings. The MCU MCU Receives instruction + XXX KEY +
Command: IOSimuKeyIn:%d

Analog controlkey output

the URinterface: http://$ReceiverIpAddress/httpapi.asp?command=IOSimuKeyOut:%d

Description: References MCU settings. The MCU Receives instruction AXX + KEY + XXX Voice
Command: the URinterface:
http://$ReceiverIpAddress/httpapi.asp?command=PromptEnable
http://$ReceiverIpAddress/httpapi.asp?command=PromptDisable

Description:

Command: PromptEnable and PromptDisable

Name		Name	Last commit message	Last commit date
Latest commit History 14 Commits
README.md		README.md
devices.md		devices.md

martinsohn/IEastMediaRoom

Folders and files

Latest commit

History

Repository files navigation

TRYAK - Sonoé iEast - API Manual

Presentation and list of interfaces

Overview

Get Sonoé iEast Information

Get system log download page

Network connection configuration WIFI

Wifi network connection

Connect to a hidden wifi network

State request for wifi connection

Hide or show SSID

Get built-in WiFi info

Music Player and Control

Reading Status

Playing a Playlist

Pause / resume playing the current music

Playing music

Previous song playback

Play next track

Fast forward and rewind

Stopping playback

Adjusting volume

Mute mode

Set the playback mode

Adjusting the Equalizer Mode

Viewing Equalizer Mode

Playback Control MicroSD Card

Viewing the File List

Get file information

Playing an Audio File on MicroSD

Get a list of cached files

Get information about cached files

Multi-Room Management

Get a list of Sonoé iEast available

Removing a Sonoé iEast from the multi-room

Hide the IP address of a Sonoé iEast

Releasing a Multi-Room Mode

Individual volume adjustment

General Volume Adjustment

Individual activation Mute

General activation Mute

General Mute Disabling

Individual management of the audio signal Right / left

Overal management of the audio signal Right / left

Individual definition of the device Name

Disabling Multi-Room

Control parameter network

Opening the WPS server

Closing the WPS server

WPS Client opening for device

Change the SSID name of the device

Setting the password WIFI

Restoring the factory setting

Restarting the device

Programming stop device (switching off)

Show time left to shut down

Stop WIFI signa

Setting the MCU display

Setting the name of device

Firmware Update

Update search

Update availability

Notification updates

Status of the update process

Download progress

Clock and Timer

Time synchronization

Set the timer

Remaining playing time (Timer)

Off alarm

Source Line IN

Read Access Line IN

Simulation Instruction IO

Instruction GPIO pullup

Instruction pulldown GPIO

GPIO reading

Packages