Display Driver Support
Display Driver SupportMPLAB® Harmony Graphics Suite contains display driver support for the following display controllers:
- Microchip Graphics LCD (GLCD) Controller
- Low-Cost Controllerless (LCC)
- External Third-Party Controllers
The Suite contains integrated support for GLCD. Using the GLCD MHC component and its configurations options a GLCD driver is made available for various display sizes. No coding is required.
The Suite contains integrated support for LCC. Using the LCC MHC component and its configurations options a LCC driver is made available for various display sizes. No coding is required.
The Suite contains integrated support for a class of external controllers. Using the External Controller MHC component and its configurations options a SSD1963 or IlI9488 driver is made available for various display sizes. No coding is required. The user must be able to reference appropriate command set of the third-party controller's datasheet.
- Quickstart Display Driver for SSD1963 Controller
Third-Party Display Modules
- Different resolutions
- Different Interfaces
- Different Display Controller vendors
Generate a custom driver for a class of Display Controller Chips. Examples are ILI9488, SSD1963, ST7796S and SSD1351
- That uses a SPI 4-line or Parallel (16- or 8-bit) 8080 interface
- That uses [command] + [data] writes for setup and frame data
- That writes frame data using Column/Row addressing
- Supports 16-bit RGB565 color mode
For other Display Controllers, it can generate a skeleton driver that ties to the graphics library.
Add the driver component to the project like a regular external controller driver
- Graphics > Driver > External Controller (Aria)
- Graphics > Driver > LE External Controller (Legato)
- Connect External Controller Driver component to library
- Connect the appropriate Display Interface component (SPI or Parallel)
If the target external display controller has an unsupported pixel transfer protocol, set Generate Mode to ‘Stub’
This will generate stub pixel transfer functions definitions that must be completed manually.
NOTE: #error is added for enforcement. Remove or disable #error when definition is completed.
If you are new to MPLAB® Harmony, you should probably start with these tutorials:
- MPLAB® Harmony v3 software framework
- MPLAB® Harmony v3 Configurator Overview
- Create a New MPLAB® Harmony v3 Project
Is this page helpful? Send feedback.
