qmk-orion

QMK Keymap for the Ferris Sweep with Sea-Picro EXT MCU.

Instructions to flash

1. Git clone in keyboards/ferris/sweep/keymaps in qmk-firmware project under orion.
2. Connect the left side of split and short GND+RST pins on the MCU for 2 seconds to get into the bootloader.
3. Run the following at the root of qmk_firmware project:

   make ferris/sweep:orion:uf2-split-left

4. Connect the right side of split and short GND+RST pins on the MCU for 2 seconds to get into the bootloader.
5. Run the following at the root of qmk_firmware project:

   make ferris/sweep:orion:uf2-split-right