Skip to content

Latest commit

 

History

History
88 lines (49 loc) · 3.75 KB

set-up-guide.md

File metadata and controls

88 lines (49 loc) · 3.75 KB
Raw

Set up Instructions

7 terminals are required in total so open 7 Terminals (Download iTerm to be able to easily navigate between panes) https://www.iterm2.com

Terminal 1: Bcoin

There are some set up instructions for setting up Bcoin at https://github.com/bcoin-org/bcoin. Complete these instructions first.

$ git clone git://github.com/bcoin-org/bcoin.git
$ cd bcoin
$ npm install
$ bcoin

bcoin should be installed globally so you should be able to run bcoin. If this command is not found, run /path/to/bcoin/bin/bcoin substituting the path to bcoin into /path/to

See https://github.com/bcoin-org/bcoin/wiki/Beginner's-Guide for more in-depth installation instructions.

Once you have confirmed that bcoin has been successfully installed globally, you may stop running bcoin command from above and instead run the following:

$ bin/bcoin --network simnet --nodes 10.7.64.53,redsquad.dev.purse.io --host '::' --public-host 172.17.0.1

Replace 172.17.0.1 with your Local IP address on the Wireless LAN. This can be be found in Mac by going to System Preferences -> Network and the IP address should be under Status: Connected

(Alternatively instead of the Wireless LAN, put whatever public facing IP address is specific to that host)

Terminal 2: BTCD

After following the instructions here: https://github.com/lightningnetwork/lnd/blob/master/docs/INSTALL.md you are ready to run the following:

~/gocode/src/github.com/roasbeef/btcd$ btcd --simnet --txindex --rpcuser=riskb --rpcpass=riskb --listen='127.0.0.1:18999' --rpclisten='127.0.0.1:19999' --addpeer='redsquad.dev.purse.io' --addpeer='10.7.64.53' --configfile='/home/nb/.btcd/btcd.conf' --generate --miningaddr=re1mKZbSabroCw5XzoAL9uLRXtnvPDoyDB --miningaddr=4NyX3pGCt6Zv5nRahysL4nSGNfvKUS44cC5X9 --miningaddr=rZ5dLBFvyUAsE6oBx8bsuf2PEPNcE5kahh

REPLACE THE VALUES FOR miningaddr= WITH ADDRESSES YOU GENERATE IN lndcli USING lncli --rpcserver "127.0.0.1:10009" newaddress np2wkh

TERMINAL 3: LND

After following the instructions here: https://github.com/lightningnetwork/lnd , run the following in any folder:

$ lnd --simnet --btcdhost=127.0.0.1:19999 --rpcuser=riskblimitedusername --rpcpass=riskblimitedpass

REPLACE THE VALUES FOR --rpcuser= and --rpcpass= with your own user and password configured in the instructions in the attached screenshot.

TERMINAL 4: btcctl

btcctl --help btcctl --simnet getpeerinfo --rpcserver='127.0.0.1:19999' --rpcpass='riskblimitedpass' --rpcuser='riskblimitedusername'

TERMINAL 5: vim ~/.btcd/btcd.conf

$ vim ~/.btcd/btcd.conf

TERMINAL 6: vim ~/.lnd/lnd.conf

$ vim ~/.lnd/lnd.conf

TERMINAL 7: lncli

nathanforhire [6:20 PM] lncli help

lncli --rpcserver "127.0.0.1:10009" newaddress np2wkh lncli --rpcserver "127.0.0.1:10009" newaddress np2wkh lncli --rpcserver "127.0.0.1:10009" newaddress np2wkh

Use the values generated above as the values for --miningaddr= in ####TERMINAL 2: BTCD####

nathanforhire [6:58 PM] // , Here is a good command to see stuff that is open on your computer: $ netstat

// , run this to get them muns:

lncli connect 038017b5220d2cafa70460dd5d9d82015cddd65232de8d1140778857d9ebd33e4e@10.7.64.88:10011

// , My identity pubkey is as follows: 0345affabb5ba4eb5d2055a90f8ce71637dd8802601d9345796a25271669476316

// , my address on our internal LAN is as follows:

172.17.0.1

yqm8tbstwsj7sbhsbzn6cfz6y4qqzar3ystdwqnhmnq67ncifgwouod5e7pfqiounrim9rog1fnajbopqpw1yx1hayjh43szra8ifwxayyyyyyyyyynprkrwhyko

$ lncli sendpayment --pay_req=yqm8tbstwsj7sbhsbzn6cfz6y4qqzar3ystdwqnhmnq67ncifgwouod5e7pfqiounrim9rog1fnajbopqpw1yx1hayjh43szra8ifwxayyyyyyyyyynprkrwhyko (edited)

lncli addinvoice --memo='magic' --value=1234 (edited)