-
Notifications
You must be signed in to change notification settings - Fork 66
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
No SD Card #24
Comments
Check your lcd cables. One of them is.dedicated to the SD card operations and if it becomes loose it won't register the card as inserted. Make sure they are pressed in firmly to the adaptor and the screen. |
Thank you that did it ----- Original Message ----- Check your lcd cables. One of them is.dedicated to the SD card operations and if it becomes loose it won't register the card as inserted. Make sure they are pressed in firmly to the adaptor and the screen. Sent from my Verizon 4G LTE smartphone -------- Original message -------- Why do I get this message No SD Card, I have a good SD card in the slot so how do I fix this problem the unit was working just fine and now I can't see the SD Card — {"api_version":"1.0","publisher":{"api_key":"05dde50f1d1a384dd78767c55493e4bb","name":"GitHub"},"entity":{"external_key":"github/mjrice/wilson","title":"mjrice/wilson","subtitle":"GitHub repository","main_image_url":" https://cloud.githubusercontent.com/assets/143418/17495839/a5054eac-5d88-11e6-95fc-7290892c7bb5.png ","avatar_image_url":" https://cloud.githubusercontent.com/assets/143418/15842166/7c72db34-2c0b-11e6-9aed-b52498112777.png ","action":{"name":"Open in GitHub","url":" https://github.com/mjrice/wilson "}},"updates":{"snippets":[{"icon":"DESCRIPTION","message":"No SD Card (#24)"}],"action":{"name":"View Issue","url":" #24 "}}} — |
Hi Marty could you help me one more time I have been using my Wilson II 3D Printer now for several months now with no problems until now When I start the print job after I do the Bed leveling and Auto Home the printer starts to print but the print head is about 2 Inches from the bed I tried to print using some of my older files with the same results The print head is in the same location and has not moved The Z offset set is set to 11.5 this is where I have been setting now for months The Auto Home and the Bed leveling works just fine and all the switches test OK Then when I start the job the printer starts just fine however the print head is about 2 inches above the bed What should I do to fix this? Thank you Gordon Groves ----- Original Message ----- Thank you that did it ----- Original Message ----- Check your lcd cables. One of them is.dedicated to the SD card operations and if it becomes loose it won't register the card as inserted. Make sure they are pressed in firmly to the adaptor and the screen. Sent from my Verizon 4G LTE smartphone -------- Original message -------- Why do I get this message No SD Card, I have a good SD card in the slot so how do I fix this problem the unit was working just fine and now I can't see the SD Card — {"api_version":"1.0","publisher":{"api_key":"05dde50f1d1a384dd78767c55493e4bb","name":"GitHub"},"entity":{"external_key":"github/mjrice/wilson","title":"mjrice/wilson","subtitle":"GitHub repository","main_image_url":" https://cloud.githubusercontent.com/assets/143418/17495839/a5054eac-5d88-11e6-95fc-7290892c7bb5.png ","avatar_image_url":" https://cloud.githubusercontent.com/assets/143418/15842166/7c72db34-2c0b-11e6-9aed-b52498112777.png ","action":{"name":"Open in GitHub","url":" https://github.com/mjrice/wilson "}},"updates":{"snippets":[{"icon":"DESCRIPTION","message":"No SD Card (#24)"}],"action":{"name":"View Issue","url":" #24 "}}} — |
I know this is going to sound strange but there is a possibility it is the motor drivers. At least for me it was. After completing both the homing and auto-level the nozzle was printing on mid-air. If it is the same issue, you can even move the nozzle manually close to the bed. I used for my Wilson the recommended KL17H248-15-4A. I found that when they are in parallel (z-axis) is to much for the A4988 Stepper Motor Drive, then freezing at that precise moment. The solution was to install instead a DRV8825 and setting the current to almost 2.7A (1.35A for each motor). I hope this helps... |
Hi Gordon, On Tue, Oct 25, 2016 at 2:29 PM, Gordon44 notifications@github.com wrote:
|
When I run the program it will go to home and the print head will go down and touch the bed and beep and them say Z HIT . After that the Z axes will move up to Z = 20 and that is where the printer will start to print from in mid air . I have tried running other files that worked just fine it the past . So what is going on , why will the Z axis move up to 20 and then start printing ? Is the software bad if so should I try to reinstall it , if so can you give me the web address to down load the newest version , ----- Original Message ----- Yes it does say Z Axes Hit ----- Original Message ----- Hi Gordon, On Tue , Oct 25, 2016 at 2:29 PM, Gordon44 < notifications@github.com > wrote:
— |
Yes it does say Z Axes Hit ----- Original Message ----- Hi Gordon, On Tue , Oct 25, 2016 at 2:29 PM, Gordon44 < notifications@github.com > wrote:
— |
Good news I dissemble everything and re-assembled including the Arduino and now the printer works must have been a bad connection not sure just what? Could you email me the link to the Marlin program this website is a little confusing to just which program I should use I am planning on having a spare Arduino Mega 2560 just in case mine might go bad in the future? Oh also do you have any plans to build a Dual Extrude head version in the near future? Thanks for your help Gordon 505 281-4495 ----- Original Message ----- When I run the program it will go to home and the print head will go down and touch the bed and beep and them say Z HIT. After that the Z axes will move up to Z=20 and that is where the printer will start to print from in mid air. I have tried running other files that worked just fine it the past. So what is going on, why will the Z axis move up to 20 and then start printing? Is the software bad if so should I try to reinstall it, if so can you give me the web address to down load the newest version, ----- Original Message ----- Yes it does say Z Axes Hit ----- Original Message ----- Hi Gordon, On Tue , Oct 25, 2016 at 2:29 PM, Gordon44 < notifications@github.com > wrote:
— |
Why do I get this message No SD Card, I have a good SD card in the slot so how do I fix this problem
the unit was working just fine and now I can't see the SD Card
The text was updated successfully, but these errors were encountered: