Skip to content

Connecting TR4W to Radios via TCP IP

Jump to bottom
Tom Schaefer edited this page Feb 6, 2022 · 3 revisions

TR4W (as of release 4.108) offers the ability to connect to radio that support an Ethernet connection. As of this release, this is only implemented for the Elecraft K4 Transceiver.

The setup is similar to using a radio over serial port but there is a new option for port type: TCP/IP.

If you set RADIO ONE CONTROL PORT to TCP/IP, the IP address and port fields will become editable. Enter the IP address or the radio and the port number. The default on a K4 is 9200 but set it to whatever you use.

That is the only difference from using a standard serial port.

Clone this wiki locally