Industrial Wireless Accelero Gyro Magneto temperature Sensor With 2 Mile Range Long range wireless IoT Accelero Gyro Magneto sensor can be found over here https://store.ncd.io/product/long-range-iot-wireless-accelerometer-gyroscope-magneto-sensor/
this Labview software will work with ncd.io wireless Accelero Gyro Magneto sesnor only
To use this Labview Utility You will need a Wireless to USB router, whihc can be found over here https://store.ncd.io/product/900hp-s3b-long-range-wireless-mesh-modem-with-usb-interface/
To use this UI, you will need to install following drivers Install run time engine from here 64bit http://www.ni.com/download/labview-run-time-engine-2017/6821/en/
32 bit http://www.ni.com/download/labview-run-time-engine-2017/6822/en/
Install NI Visa Driver -- http://www.ni.com/download/ni-visa-run-time-engine/6647/en/
Install Labview Run time serial driver http://www.ni.com/download/ni-serial-17.0/6613/en/ http://www.ni.com/download/labview-run-time-engine-2017-sp1/7191/en/
Getting strated guide for this product can be found over here https://ncd.io/long-range-iot-wireless-accelerometer-gyroscope-magneto-temperature-sensor-getting-started/
complete product manual for this product can be found over here https://ncd.io/long-range-iot-wireless-accelerometer-gyroscope-magneto-temperature-sensor-product-manual/