Skip to content

noradtux/evnotipi-watchdog

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

48 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Adafruit Trinket M0 watchdog for EVNotiPi

I shared this board on two manufacturers sites:

Building

You will need PlatformIO for building and installing the firmware. See https://docs.platformio.org/en/latest/installation.html for installation instructions.

To build and upload attach the Trinket M0 by USB and run pio run -t upload.

Easy adaptor for connecting the watchdog to the Pi

Plugging in patch cables in top of the CAN hat uses lots of space which the case does not provide. So the original solution was to bend the pins to save some verical space. Now there is a simple adaptor board which saves some millimeters and also allows connecting through a 5 pin ribbon cable.

Available here: https://aisler.net/p/ODQEXOXX

I suggest using a 10cm female-female jumper cable with (at least) 5 pins.

About

No description, website, or topics provided.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages