-
Notifications
You must be signed in to change notification settings - Fork 150
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Read faster? #40
Comments
This problem may be solved by increase the range of rfid reader by using
ACTIVE RFID TAGS that lies on ground.
…On Thu, Mar 8, 2018, 12:36 AM Ogg3l ***@***.***> wrote:
Hi,
first of all thank you for you rc bib. It works fine :)
Do you have any idea to read faster? We have the RFID reader under
remote-controlled cars and the Tags lie on the ground. The problem is, that
the cars drive too fast over the tags, so that the reader can't read.
We have no idea to improve that. Maybe you have an idea? :)
Thank you :)
—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub
<#40>, or mute the thread
<https://github.com/notifications/unsubscribe-auth/Af75WpS3connHo-CRwaiHrrlHXCKS8jbks5tcCuEgaJpZM4Sg94r>
.
|
Ahh okay thank you for the info. We thought that there is maybe an option to improve the read rate or something like that. Is there an option we could test without Active Tags? Do you have an idea? The only option we found was the antenna gain. We set this to the value 7. It seems that 7 is the highest value. |
since mfrc522 works on spi protocol, you can increase the data transfer
rate by increasing the serial clock sck of master device.
And if you do not want to use active tags then you can also connect a long
range antenna, which is able to transmit more power, to mfrc522 module.
…On Thu, Mar 8, 2018, 12:13 PM Ogg3l ***@***.***> wrote:
Ahh okay thank you for the info. We thought that there is maybe an option
to improve the read rate or something like that. Is there an option we
could test without Active Tags? Do you have an idea?
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#40 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/Af75WhoJQtZxY-19Ovkx6Z-fyExu6QOHks5tcNMGgaJpZM4Sg94r>
.
|
Can you explain how to increase the clock rate? We are newbies on this issue. Edit: We are working on a raspberry pi |
Hi,
first of all thank you for you rc bib. It works fine :)
Do you have any idea to read faster? We have the RFID reader under remote-controlled cars and the Tags lie on the ground. The problem is, that the cars drive too fast over the tags, so that the reader can't read.
We have no idea to improve that. Maybe you have an idea? :)
Thank you :)
The text was updated successfully, but these errors were encountered: