f658--20230406-0704)

Update actions yaml

Version 3.23

• Add all mode to RAW command (Bound, short, IEEE, group, broadcast)
• Fix WindowCovering to permit lift percentage
• Fix : send defaultResponse only if ZCL

3.21 with PDM backup

 Backup and restore PDM records.

Backup code 0x0B00 with response 0x8B00;
Restore code  0x0B01 with response 0x8B01;
Before restore we need stop BDB and ZPS routines - code 0x0B02.
Serial buffer 256 bytes, so pdm parts need to be smaller, and sending small chunks. First 4 words (2 bytes * 4) are: PDM address, Data size, Full record data size, Offset from start PDM record.

Version 3.21

• Add raw message when there are errors on write attribute command
• Fix for Xiaomi and Lumi devices which ask manufacture code (0x115f) whith node descriptor request
• Fix BindGroup command

Version 3.20

• Fix IASZONE to be more flexible
• Fix Wiser endpoint

v3.1e

ZiGate 3.1e with fixes to compile the firmware on Linux

• Add ACK + IEEE mode to RAW Mode
• Add NPDU et APDU info on Status message (At the end (0x8000)
• Add extended Message on 0x9999 command
• Add LoRaTap command and add more compatibility on ON/OFF command
• Add 8012/8072 command
• Add Default response capability to RAW message
• Fix memory issue to ZPSCFG 7 APS ACK MAX + 14 APDU + 14 NPDU + 70 Routing table
• Fix BDB messages. Message filter when a device attack many endpoint
• Fix duplicate packet in RAW/hybrid mode
• Fix E_ZCL_ERR_SECURITY_RANGE on ZLO register
• Fix HATransportKey function (Device Authentification)
• Fix overflow on serial command
• Fix Memory leak and clean APDU
• Fix some other bugs
• Delete Migration procedure

snapshot-20210103

Firmwares that were built with Linux toolchain

snapshot-20201201

Zigate firmware for jn5169 from git (3.1e)

snapshot-20201008

ZiGate 3.1c version and patch fix leak from 3.1d

zigate.sh by @divanikus

after flash ./zigate.sh erase_pdm