docs/libvirt: Add dependency installation. #315

russellb · 2018-09-24T18:23:16Z

Add a few things to the libvirt howto after my first pass runing it:

Add dependency installation
Renumber sections after inserting new dependency install section
Start libvirtd
Show how to create the default libvirt storage pool
Fix rhcos imgae name
Clarify that when running the --permanent commands for firewalld are
in addition to running the same commands without the flag
change reference to ../libvirt.yaml to libvirt.yaml to match where
the file will be based on past instructions

russellb · 2018-09-24T18:23:34Z

This will conflict with #297, so I'll rebase it after that one merges

wking · 2018-09-24T18:49:30Z

Documentation/dev/libvirt-howto.md

+enable the libvirt daemon.
+
+```sh
+sudo dnf copr enable vbatts/bazel


This is not libvirt-specific; I'd rather have it somewhere else (CONTRIBUTING.md? A new Documentation/dev/dependencies.md?). Also, for folks not using dnf (e.g. me on my RHEL 7.5 CSB laptop), a link to here gives you instructions for other systems (e.g. the release repo uses this).

Good point. I'll move the stuff that isn't libvirt-howto specific somewhere else. I guess I'll create a dependencies.md file unless someone has a strong opinion otherwise.

wking · 2018-09-24T18:50:54Z

Documentation/dev/libvirt-howto.md

+```
+
+Check to see if a default storage pool has been defined in Libvirt by running
+`sudo virsh pool-list`.  If it does not exist, create it:


I dunno how portable this is, but on my RHEL 7.5 CSB system I don't need root:

$ virsh -c qemu:///system pool-list Name State Autostart ------------------------------------------- default active yes

A later step in libvirt-howto shows how to enable non-root access. Perhaps you've already done that? At this point in the instructions though, I was assuming it hadn't been done.

A later step in libvirt-howto shows how to enable non-root access. Perhaps you've already done that?

I don't remember having done that, and I don't have the polkit rule mentioned there:

$ sudo ls -l /etc/polkit-1/rules.d/ total 8 -rw-r--r--. 1 root root 974 Jan 26 2014 49-polkit-pkla-compat.rules -rw-r--r--. 1 root root 326 Apr 29 2013 50-default.rules

It would be nice to have a vanilla RHEL system to test on.

OK, thanks. I'll adjust it and then try all this again some other time when I have a fresh system again.

I'm also going to move this section down by the other libvirt config related steps

wking · 2018-09-24T18:54:25Z

Documentation/dev/libvirt-howto.md

@@ -163,7 +192,7 @@ alias tectonic="${PWD}/tectonic-dev/installer/tectonic"

 Initialize (the environment variables are a convenience):
 ```sh
-tectonic init --config=../libvirt.yaml
+tectonic init --config=libvirt.yaml


Should we match the README and use the examples/libvirt.yaml distributed with the tarball?

My personal preference is that I like the current instructions to make a new copy of it. That way local customizations aren't tracked by git.

My personal preference is that I like the current instructions to make a new copy of it.

I don't care either way (I expect users will be able to make this decision on their own). But however you go here, can you make any README updates needed to keep the two consistent?

Sure, done!

wking · 2018-09-24T20:27:05Z

Documentation/dev/libvirt-howto.md

@@ -7,16 +7,57 @@ for operator development.
 ### 1. One-time setup
 It's expected that you will create and destroy clusters often in the course of development. These steps only need to be run once (or once per RHCOS update).

-#### 1.1 Pick a name and ip range
+Before you begin, install the [general installer development
+dependencies](dependencies.md).


It would be nice to have a link like this from CONTRIBUTING.md too.

Sure, I'll add it.

eparis · 2018-09-27T00:24:51Z

/ok-to-test

wking · 2018-09-27T00:37:17Z

Needs a rebase, and tests may be blocked on operator-framework/operator-lifecycle-manager#486 anyway.

wking · 2018-09-27T16:07:47Z

docs/dev/build-dependencies.md

@@ -0,0 +1,16 @@
+# Build Dependency Installation


Probably squash this content into a new section of the new-in-#328 docs/dev/dependencies.md (and thanks for hanging in there despite the flux :).

Add a few things to the libvirt howto after my first pass running it: - Add dependency installation - Start libvirtd - Show how to create the default libvirt storage pool - Renumber sections after inserting new sections - Fix rhcos image name - Clarify that when running the --permanent commands for firewalld are in addition to running the same commands without the flag - change reference to ../libvirt.yaml to libvirt.yaml to match where the file will be based on past instructions

wking · 2018-09-27T16:56:35Z

/lgtm

openshift-ci-robot · 2018-09-27T16:56:42Z

[APPROVALNOTIFIER] This PR is APPROVED

This pull-request has been approved by: russellb, wking

The full list of commands accepted by this bot can be found here.

The pull request process is described here

Needs approval from an approver in each of these files:

~~OWNERS~~ [wking]

Approvers can indicate their approval by writing /approve in a comment
Approvers can cancel approval by writing /approve cancel in a comment

openshift-bot · 2018-09-27T17:19:24Z

/retest

Please review the full test history for this PR and help us cut down flakes.

This should have happened when "Build Dependencies" landed in 4278ba3 (docs/libvirt-howto: Add dependency installation, 2018-09-24, openshift#315).

…-release:4.0.0-0.6 Clayton pushed release:4.0.0-0.nightly-2019-03-04-234414 to quay.io/openshift-release-dev/ocp-release:4.0.0-0.7. Extracting the associated RHCOS build: $ oc adm release info --pullspecs quay.io/openshift-release-dev/ocp-release:4.0.0-0.7 | grep machine-os-content machine-os-content quay.io/openshift-release-dev/ocp-v4.0-art-dev@sha256:399582f711226ab1a0e76d8928ec55436dea9f8dc60976c10790d308b9d92181 $ oc image info quay.io/openshift-release-dev/ocp-v4.0-art-dev@sha256:399582f711226ab1a0e76d8928ec55436dea9f8dc60976c10790d308b9d92181 | grep version version=47.330 that's the same machine-os-content image referenced from 4.0.0-0.5, which we used for installer v0.13.0, and 4.0.0-0.6, which we used for installer v0.13.1. Renaming OPENSHIFT_INSTALL_RELEASE_IMAGE_OVERRIDE gets us CI testing of the pinned release despite openshift/release@60007df2 (Use RELEASE_IMAGE_LATEST for CVO payload, 2018-10-03, openshift/release#1793). Also comment out regions which this particular RHCOS build wasn't pushed to, leaving only: $ curl -s https://releases-rhcos.svc.ci.openshift.org/storage/releases/maipo/47.330/meta.json | jq -r '.amis[] | .name' ap-northeast-1 ap-northeast-2 ap-south-1 ap-southeast-1 ap-southeast-2 ca-central-1 eu-central-1 eu-west-1 eu-west-2 eu-west-3 sa-east-1 us-east-1 us-east-2 us-west-1 us-west-2 I'd initially expected to export the pinning environment variables in release.sh, but I've put them in build.sh here because our continuous integration tests use build.sh directly and don't go through release.sh. Using the slick, new change-log generator from [1], here's everything that changed in the update payload: $ oc adm release info --changelog ~/.local/lib/go/src --changes-from quay.io/openshift-release-dev/ocp-release:4.0.0-0.6 quay.io/openshift-release-dev/ocp-release:4.0.0-0.7 # 4.0.0-0.7 Created: 2019-03-05 18:33:12 +0000 UTC Image Digest: `sha256:641c0e4f550af59ec20349187a31751ae5108270f13332d1771935520ebf34c1` Promoted from registry.svc.ci.openshift.org/ocp/release:4.0.0-0.nightly-2019-03-04-234414 ## Changes from 4.0.0-0.6 ### Components * Kubernetes 1.12.4 ### New images * [must-gather](https://github.com/openshift/must-gather) git [8286a5dc](https://github.com/openshift/must-gather/commit/8286a5dc432e339dc79c75044424cd9c89dc634b) `sha256:8faf4b3739c952de448c69325c8c101193c0665bb149d3d2830afd2aca973413` ### Rebuilt images without code change * [cluster-config-operator](https://github.com/openshift/cluster-config-operator) git [aa1805e7](https://github.com/openshift/cluster-config-operator/commit/aa1805e73138deabbfa57772170f310e2f3097cd) `sha256:86bb159de280a6d9f81a69081090148cfad233db1b6f596a996097b56c0d6940` * [cluster-openshift-apiserver-operator](https://github.com/openshift/cluster-openshift-apiserver-operator) git [0a65fe40](https://github.com/openshift/cluster-openshift-apiserver-operator/commit/0a65fe40a74cfc6114fdaa30e2b2c24924509cda) `sha256:71f521d9cb0b1f03fe78938f90df7a0a9bdf5a45a31c65b168533e507644da34` * [cluster-storage-operator](https://github.com/openshift/cluster-storage-operator) git [b8502422](https://github.com/openshift/cluster-storage-operator/commit/b850242280b7ef2cf7631952229c0a438ec39e64) `sha256:7b9990d7f21ddd4d981701d7f1e326e3ae2041d9aafad53115a828a9f0fa8d0e` * [cluster-svcat-apiserver-operator](https://github.com/openshift/cluster-svcat-apiserver-operator) git [547648cb](https://github.com/openshift/cluster-svcat-apiserver-operator/commit/547648cb7b3f2a0d8f049f680c18ac66cd339b3f) `sha256:6edd77ad4ef48f3b29045acc0c9a57b01dcfb2c42b497ab857fa4eb27d8a841c` * [cluster-svcat-controller-manager-operator](https://github.com/openshift/cluster-svcat-controller-manager-operator) git [9261f420](https://github.com/openshift/cluster-svcat-controller-manager-operator/commit/9261f420a3db9556606c8ee0980a5e02a8f28d89) `sha256:9af8c72361b3a8bad34c44be6903e02c0f8a56b6ef4d459fce9c75ee38251093` * [configmap-reloader](https://github.com/openshift/configmap-reload) git [3c2f8572](https://github.com/openshift/configmap-reload/commit/3c2f85724078cbf7ffab56886ff32d677c386afe) `sha256:fc79d84dee4f2a998a105e94a1457eb5aabf85b1b9d1a6468aca6f8835c04408` * [container-networking-plugins-supported](https://github.com/openshift/ose-containernetworking-plugins) git [f6a58dce](https://github.com/openshift/ose-containernetworking-plugins/commit/f6a58dcec62ca740305a58a0a6b008c5e57b8943) `sha256:4a561991866a16773e965586f40a5684174229430e56ad25f15b851fe8e725ed` * [container-networking-plugins-unsupported](https://github.com/openshift/ose-containernetworking-plugins) git [f6a58dce](https://github.com/openshift/ose-containernetworking-plugins/commit/f6a58dcec62ca740305a58a0a6b008c5e57b8943) `sha256:9f720109ad203a0a0e44e0da14e2e82aefaa40e6d41accdefdc5ec2b3aed9153` * [coredns](https://github.com/openshift/coredns) git [fbcb8252](https://github.com/openshift/coredns/commit/fbcb8252a1bab3d32ecf2dd3307f798aacd0280e) `sha256:3fe76f173faaf16af80d4f865c377a4dc4db24d32c1bba4c6d3115e66a788861` * [docker-builder](https://github.com/openshift/builder) git [1a77d837](https://github.com/openshift/builder/commit/1a77d837d8d74d5dcb6f8afcadb082629b04883e) `sha256:7bcb847c457cf8bf5813e10e46058f34426560d0798ca1d80f8ee34e5fa5727b` * [docker-registry](https://github.com/openshift/image-registry) git [afcc7daa](https://github.com/openshift/image-registry/commit/afcc7daa5eeeb6a77754ae86decefade83314189) `sha256:a457ab8bc3be66c97ce6babd77e6f1c1eaff91477bd5442460f927db06a15e55` * [etcd](https://github.com/openshift/etcd) git [a0e62b48](https://github.com/openshift/etcd/commit/a0e62b48f8db8572c129fa3d3507c7ce118ab650) `sha256:6b65c7ff285c611ae17a91deff91c0585773507e7fcffec7353ea849a66bd018` * [k8s-prometheus-adapter](https://github.com/openshift/k8s-prometheus-adapter) git [815fa76b](https://github.com/openshift/k8s-prometheus-adapter/commit/815fa76bdbccfd5ee6da8f9fa45d039c4342dcdb) `sha256:4274c276fec8729ad17ff77d74188ade01e3695b3b2afa3b995081394b107857` * [kube-rbac-proxy](https://github.com/openshift/kube-rbac-proxy) git [3f271e09](https://github.com/openshift/kube-rbac-proxy/commit/3f271e0951f18276ec54e8eac936725d6d68e073) `sha256:61180c69f1cba674625bd6c85995f524bdbdde27b2d08ea7efcecd7d3427409b` * [kube-state-metrics](https://github.com/openshift/kube-state-metrics) git [2ab51c9f](https://github.com/openshift/kube-state-metrics/commit/2ab51c9f341799107ffbf7f373ab55254dc044d0) `sha256:fc9fa4ce84819c084737115feef722f49d05d43ca6f438edfbc21535e2479b2d` * [multus-cni](https://github.com/openshift/ose-multus-cni) git [61f9e088](https://github.com/openshift/ose-multus-cni/commit/61f9e0886370ea5f6093ed61d4cfefc6dadef582) `sha256:077b65e55d01d3abd114933c4e132a642a0315f83b93b05b185fa338ce09595a` * [operator-registry](https://github.com/operator-framework/operator-registry) git [0531400c](https://github.com/operator-framework/operator-registry/commit/0531400c661ef7088d71b86ff5f52892f9407a1a) `sha256:035af1a1f35a1f0d8159576460437d9d3529b4f64e0b142a8da59a5e4e056a68` * [pod](https://github.com/openshift/images) git [2f60da39](https://github.com/openshift/images/commit/2f60da39a9d2e5cc00293b8ec7ad559fcd32446a) `sha256:810ded5c25b9ec252dba6a2497d1eff9ad13a19cc3ac290ef8943b7d658803f2` * [prom-label-proxy](https://github.com/openshift/prom-label-proxy) git [46423f9d](https://github.com/openshift/prom-label-proxy/commit/46423f9d573c7d53f5727de1e2db095ae039da06) `sha256:da1d1556af41b9d71e24cdc7406e0671f3eca877a16e465e6e5bdd5ecfad6bd1` * [prometheus](https://github.com/openshift/prometheus) git [6e5fb5dc](https://github.com/openshift/prometheus/commit/6e5fb5dcb6a709bd20ea68cddc1abfcceb8a487d) `sha256:5625206aa10f98cb2306bb37621cc3a6637ef69a43713fb4f9a34ebff1d4b3ff` * [prometheus-alertmanager](https://github.com/openshift/prometheus-alertmanager) git [4617d550](https://github.com/openshift/prometheus-alertmanager/commit/4617d5502332dc41c9c885cc12ecde5069191f73) `sha256:414275a7a91f92951cae01928234aed2e0d4670fb911f0d1f189a2ee0a821c9e` * [prometheus-config-reloader](https://github.com/openshift/prometheus-operator) git [f8a0aa17](https://github.com/openshift/prometheus-operator/commit/f8a0aa170bf81ef70e16875053573a037461042d) `sha256:26c197ba809ac3cd18a79c1dde21812e97e6957e0dfc93ac6f4c50947f3dfe99` * [prometheus-node-exporter](https://github.com/openshift/node_exporter) git [f248b582](https://github.com/openshift/node_exporter/commit/f248b582878226c8a8cd650223cf981cc556eb44) `sha256:8a107dd61b46e2fd0b71e1e6c291f97ccd634fd4c759f46d9f4403c3a6f4496a` * [prometheus-operator](https://github.com/openshift/prometheus-operator) git [f8a0aa17](https://github.com/openshift/prometheus-operator/commit/f8a0aa170bf81ef70e16875053573a037461042d) `sha256:1d0dd92b072c381c0471b1b8ed6f3bc5eded95d747c87b4bbe659c1396ad63ed` * [service-catalog](https://github.com/openshift/service-catalog) git [b24ffd6f](https://github.com/openshift/service-catalog/commit/b24ffd6f826fe094a49afc04a5d62ab65490bb37) `sha256:03b053176eacf0e847d75c5ce8137455faa4c7a52623381f723de1fa87a36761` * [service-serving-cert-signer](https://github.com/openshift/service-serving-cert-signer) git [30924216](https://github.com/openshift/service-serving-cert-signer/commit/309242162ed5bcf9398fca0ba9418244ec7c6808) `sha256:032cf8f0fd7ac91f58ee670244892812cd024d8d7eee923266b9acf97ee21ac4` ### [aws-machine-controllers](https://github.com/openshift/cluster-api-provider-aws) * deps: switch cluster-api dependency to use master branch [#169](https://github.com/openshift/cluster-api-provider-aws/pull/169) * E2e ginkgo [#170](https://github.com/openshift/cluster-api-provider-aws/pull/170) * Update list of owners [#171](https://github.com/openshift/cluster-api-provider-aws/pull/171) * [Full changelog](https://github.com/openshift/cluster-api-provider-aws/compare/c0c3b9e0e8e626d74360ecb806b06c3b09df27bb...17d5aacdeb2df8898b20286970ace7d42f0c376a) ### [cli, deployer, hyperkube, hypershift, node, tests](https://github.com/openshift/ose) * update external examples [#22029](https://github.com/openshift/ose/pull/22029) * UPSTREAM: <carry>: openapi: half encoding costs [#22056](https://github.com/openshift/ose/pull/22056) * UPSTREAM: 74416: apiserver: add --minimal-shutdown-duration to delay until endpoint convergence [#22151](https://github.com/openshift/ose/pull/22151) * UPSTREAM: 74617: make audit metadata work for custom resources [#22157](https://github.com/openshift/ose/pull/22157) * Poll in bootstrap user e2e test [#22070](https://github.com/openshift/ose/pull/22070) * If the git log is empty don't error out from `release info --changelog` [#22163](https://github.com/openshift/ose/pull/22163) * UPSTREAM: 0000: retry on discovery errors in crd-discovery-available post-start hook [#22168](https://github.com/openshift/ose/pull/22168) * UPSTREAM: 00000: wait for CRD discovery to be successful once before … [#22178](https://github.com/openshift/ose/pull/22178) * add some advice to 'oc debug' for debugging nodes [#22109](https://github.com/openshift/ose/pull/22109) * Fix deads2k typo in features OWNERS [#22128](https://github.com/openshift/ose/pull/22128) * Replace all kubectl in oc adm top pod/node examples [#22152](https://github.com/openshift/ose/pull/22152) [rhbz#1470006](https://bugzilla.redhat.com/show_bug.cgi?id=1470006) * [4.0] UPSTREAM: 74306: Fix scanning of failed targets [#22136](https://github.com/openshift/ose/pull/22136) * Add openshift-integrated-oauth-server command [#21987](https://github.com/openshift/ose/pull/21987) * UPSTREAM: 74668: kube-apiserver: don't create endpoints before being ready [#22181](https://github.com/openshift/ose/pull/22181) * apiextensions: openapi ObjectMeta/TypeMeta schema only if validation spec is given [#22193](https://github.com/openshift/ose/pull/22193) * [4.0] UPSTREAM: 74524: Don't fail if iface is being used by iSCSI session [#22176](https://github.com/openshift/ose/pull/22176) * UPSTREAM: 74636: Remove reflector metrics as they currently cause a memory leak [#22180](https://github.com/openshift/ose/pull/22180) * apiextensions-apiserver: fix empty APIResource group+version handling in wait logic [#22188](https://github.com/openshift/ose/pull/22188) * Ensure clone works without `-C` for release extraction [#22184](https://github.com/openshift/ose/pull/22184) * Test conformance from 1.12 for Kube [#21995](https://github.com/openshift/ose/pull/21995) * [d42ad916](https://github.com/openshift/ose/commit/d42ad916) * [Full changelog](https://github.com/openshift/ose/compare/0cbcfc5afeab12a1b5b3f801eb247ff023e42b67...e268aada53a27b7cba51e4267d035dad207a1d8a) ### [cloud-credential-operator](https://github.com/openshift/cloud-credential-operator) * pkg/controller/utils: Fix "reutrn" -> "return" comment typo [#36](https://github.com/openshift/cloud-credential-operator/pull/36) * aws: include operator version in UserAgent for AWS API calls [#34](https://github.com/openshift/cloud-credential-operator/pull/34) * [Full changelog](https://github.com/openshift/cloud-credential-operator/compare/01bbf372a2c83bd4b1c9a433cba15808ba1e5e92...97e00568622e2a82cde1e964be7ea7c37fe85b4f) ### [cluster-authentication-operator](https://github.com/openshift/cluster-authentication-operator) * fix template synced secret names [#85](https://github.com/openshift/cluster-authentication-operator/pull/85) * Move to OsinServerConfig [#79](https://github.com/openshift/cluster-authentication-operator/pull/79) * Move to a passthrough route to support mTLS [#83](https://github.com/openshift/cluster-authentication-operator/pull/83) * [Full changelog](https://github.com/openshift/cluster-authentication-operator/compare/35879ec061749de8926fa9a14dbd687e4e052048...88650bd64069ed79a411098b481ac2416526ce0e) ### [cluster-autoscaler](https://github.com/openshift/kubernetes-autoscaler) * E2e ginkgo [#43](https://github.com/openshift/kubernetes-autoscaler/pull/43) * UPSTREAM: <carry>: openshiftmachineapi: remove unused fields [#44](https://github.com/openshift/kubernetes-autoscaler/pull/44) * [Full changelog](https://github.com/openshift/kubernetes-autoscaler/compare/d8a4a30478e04c8e97a693f99fb3ad802115171c...e1a6a0960a100132abc5f8398ff73dbb0f45ae28) ### [cluster-autoscaler-operator](https://github.com/openshift/cluster-autoscaler-operator) * Remove resource limits in operator deployment [#58](https://github.com/openshift/cluster-autoscaler-operator/pull/58) * Override default CAO image [#59](https://github.com/openshift/cluster-autoscaler-operator/pull/59) * Add tests and change StatusReporter.client to osconfig.Interface [#56](https://github.com/openshift/cluster-autoscaler-operator/pull/56) * Add cluster-critical priority to autoscaler-operator [#57](https://github.com/openshift/cluster-autoscaler-operator/pull/57) * Vendor ginkgo tests [#60](https://github.com/openshift/cluster-autoscaler-operator/pull/60) * Update list of owners [#64](https://github.com/openshift/cluster-autoscaler-operator/pull/64) * Add unit tests for Apply [#63](https://github.com/openshift/cluster-autoscaler-operator/pull/63) * [Full changelog](https://github.com/openshift/cluster-autoscaler-operator/compare/73c46659d0e2c0ac03e6e207d52ff0c025b04786...0c2284a7a7cff0e123ace8d5e43337e4cc9739e9) ### [cluster-bootstrap](https://github.com/openshift/cluster-bootstrap) * Add --tear-down-early, defaulting to true [#19](https://github.com/openshift/cluster-bootstrap/pull/19) * [Full changelog](https://github.com/openshift/cluster-bootstrap/compare/05a5c8e68f409baccdb421b9f80ce0e8841172bd...90a38fd8d9dc0b0a61214f079fd4734b034bae0c) ### [cluster-dns-operator](https://github.com/openshift/cluster-dns-operator) * status: report cluster operator version from payload [#78](https://github.com/openshift/cluster-dns-operator/pull/78) * [Full changelog](https://github.com/openshift/cluster-dns-operator/compare/ffb04ae9e56023812e55e35ac6713568ece0fbac...e4aa0a50f865e8399aeeccaf8c24f8d891cd67c2) ### [cluster-image-registry-operator](https://github.com/openshift/cluster-image-registry-operator) * disable kube/openshift api server operators before running tests [#222](https://github.com/openshift/cluster-image-registry-operator/pull/222) * Return error that happened [#224](https://github.com/openshift/cluster-image-registry-operator/pull/224) * test/e2e: Do not wait for PVC to change its status from "Pending" to something else [#226](https://github.com/openshift/cluster-image-registry-operator/pull/226) * [Full changelog](https://github.com/openshift/cluster-image-registry-operator/compare/80600487ebb150b67f6356c7e521953dbe94abbf...689aa65b90644aead5b579acce2725a08bd70f93) ### [cluster-ingress-operator](https://github.com/openshift/cluster-ingress-operator) * controller/certificate: move cert generation to cert controller [#141](https://github.com/openshift/cluster-ingress-operator/pull/141) * controller/certificate: relocate CA publishing [#142](https://github.com/openshift/cluster-ingress-operator/pull/142) * Publish global secret with default certificates and keys [#139](https://github.com/openshift/cluster-ingress-operator/pull/139) * Simplify ClusterOperatorStatus comparison [#148](https://github.com/openshift/cluster-ingress-operator/pull/148) * Add function for name of in-use default certificate [#149](https://github.com/openshift/cluster-ingress-operator/pull/149) * [Full changelog](https://github.com/openshift/cluster-ingress-operator/compare/09d14db8edbc265299bd70095136359a45dc8b55...e53dfea77b35656f105c41d5c1a3bcb2bc6fbcba) ### [cluster-kube-apiserver-operator](https://github.com/openshift/cluster-kube-apiserver-operator) * do not default the internal registry hostname to anything [#311](https://github.com/openshift/cluster-kube-apiserver-operator/pull/311) * switch to pull if not present [#313](https://github.com/openshift/cluster-kube-apiserver-operator/pull/313) * library-go: fix retry logic when getting installer pod self-reference [#310](https://github.com/openshift/cluster-kube-apiserver-operator/pull/310) * bump(library-go): improve logging of what causes a static pod rollout [#315](https://github.com/openshift/cluster-kube-apiserver-operator/pull/315) * [Full changelog](https://github.com/openshift/cluster-kube-apiserver-operator/compare/fa75c058db5e9c9de6b0a4674029f869a6062555...4c34fbfd2b4382e366d45f5e9acd07fb8da1ee9d) ### [cluster-kube-controller-manager-operator](https://github.com/openshift/cluster-kube-controller-manager-operator) * library-go: fix retry logic when getting installer pod self-reference [#185](https://github.com/openshift/cluster-kube-controller-manager-operator/pull/185) * bump(library-go): improve logging of what causes a static pod rollout [#187](https://github.com/openshift/cluster-kube-controller-manager-operator/pull/187) * [Full changelog](https://github.com/openshift/cluster-kube-controller-manager-operator/compare/53ff6d862bbd258b8e6ee1bc7016ec36a333ef1a...52a2f710ae90f0624c47040bf6d9b0ad55538de0) ### [cluster-kube-scheduler-operator](https://github.com/openshift/cluster-kube-scheduler-operator) * bump to get versions, status, upgradeable, servicemonitors, installer pod fixes [#66](https://github.com/openshift/cluster-kube-scheduler-operator/pull/66) * Change kubescheduler type name from instance to cluster [#68](https://github.com/openshift/cluster-kube-scheduler-operator/pull/68) * switch to pull if not present from always [#69](https://github.com/openshift/cluster-kube-scheduler-operator/pull/69) * [Full changelog](https://github.com/openshift/cluster-kube-scheduler-operator/compare/7066c963cb2b35227767f19f565f0a3816a54a01...c68e8b1af27033dec9ca9cd36c831b0796cef798) ### [cluster-machine-approver](https://github.com/openshift/cluster-machine-approver) * Approve CSRs based on machine status [#10](https://github.com/openshift/cluster-machine-approver/pull/10) * [Full changelog](https://github.com/openshift/cluster-machine-approver/compare/2fbc6a6b2b4dd37e953aeb8331dc4edc17ead993...c4ba3024437a348a03ee1459cdf9823d7c6de4a8) ### [cluster-monitoring-operator](https://github.com/openshift/cluster-monitoring-operator) * jsonnet: programmatically remove limits [#273](https://github.com/openshift/cluster-monitoring-operator/pull/273) * pkg/tasks/prometheus: update kubelet serving CA if it changed [#271](https://github.com/openshift/cluster-monitoring-operator/pull/271) * jsonnet: No shared tooltip and use node-exporter metrics in adapter [#272](https://github.com/openshift/cluster-monitoring-operator/pull/272) * *: Enable etcd monitoring by default [#239](https://github.com/openshift/cluster-monitoring-operator/pull/239) * pkg/tasks: create service monitor at the end of each tasks. [#274](https://github.com/openshift/cluster-monitoring-operator/pull/274) * assets: Drop accidental and high cardinality metrics [#276](https://github.com/openshift/cluster-monitoring-operator/pull/276) * hack: Adapt generate etcd secret script to 4.0 [#277](https://github.com/openshift/cluster-monitoring-operator/pull/277) * clusteroperator: Report the appropriate injected status version [#278](https://github.com/openshift/cluster-monitoring-operator/pull/278) * [Full changelog](https://github.com/openshift/cluster-monitoring-operator/compare/3609aea4fc2defca4cfef8f2e46677d9f45946ad...25fd008f1fb34cc27332fcc59f6821ef01c306a6) ### [cluster-network-operator](https://github.com/openshift/cluster-network-operator) * HACKING: add steps for how to build the node image. [#107](https://github.com/openshift/cluster-network-operator/pull/107) * [Full changelog](https://github.com/openshift/cluster-network-operator/compare/15204e63ace4000afa531193af95894371d4cfe0...b13c79c1ae6290bbc472c0ac260855e26d71dfd3) ### [cluster-node-tuned](https://github.com/openshift/openshift-tuned) * Lower the number of times tuned needs to be reloaded. [#15](https://github.com/openshift/openshift-tuned/pull/15) * [Full changelog](https://github.com/openshift/openshift-tuned/compare/278ee72d9c6d5302c00ee83356d0574c63c26e3d...b580cb6f52a0e352aebbe0e368d5ec020230c532) ### [cluster-node-tuning-operator](https://github.com/openshift/cluster-node-tuning-operator) * Retry loop for creating Tuned CR. [#42](https://github.com/openshift/cluster-node-tuning-operator/pull/42) * status: report cluster operator version from payload [#43](https://github.com/openshift/cluster-node-tuning-operator/pull/43) * [Full changelog](https://github.com/openshift/cluster-node-tuning-operator/compare/b5c14debb9963f2239270d61f4b05719ca7d2df0...900d59d3aa7a59aa31318bc25efc5df1e994e4b9) ### [cluster-openshift-controller-manager-operator](https://github.com/openshift/cluster-openshift-controller-manager-operator) * bump(*): pick up https://github.com/openshift/library-go/pull/284 [#78](https://github.com/openshift/cluster-openshift-controller-manager-operator/pull/78) * Drop etcd metrics [#80](https://github.com/openshift/cluster-openshift-controller-manager-operator/pull/80) * [Full changelog](https://github.com/openshift/cluster-openshift-controller-manager-operator/compare/3f79b51b7a524109e6803dd0f772d4dbf3b62c61...6656fd894295a9924c6bf5de244586705508e595) ### [cluster-samples-operator](https://github.com/openshift/cluster-samples-operator) * Goto tbr [#111](https://github.com/openshift/cluster-samples-operator/pull/111) * Cvo tweaks [#115](https://github.com/openshift/cluster-samples-operator/pull/115) * Add must-gather image reference and ImageStream [#116](https://github.com/openshift/cluster-samples-operator/pull/116) * [Full changelog](https://github.com/openshift/cluster-samples-operator/compare/f00132453a0b88b8393a27b16debc8eb89f80c38...204cf2ba6a3a12d2344f69d19f539ebc31f39683) ### [cluster-version-operator](https://github.com/openshift/cluster-version-operator) * pkg/cvo: report actual metrics on Complete() [#124](https://github.com/openshift/cluster-version-operator/pull/124) * [Full changelog](https://github.com/openshift/cluster-version-operator/compare/70c0232ed95e4b0e0cd78efdcdec6f2410f592bb...bcf8bf290bc7d0090769b4722831dbb157b75d01) ### [console](https://github.com/openshift/console) * Only store swagger.json definitions [#1226](https://github.com/openshift/console/pull/1226) * Improve console-e2e test reliability in CI [#1236](https://github.com/openshift/console/pull/1236) * Edit secret page returns to previous page when cancelling [#1196](https://github.com/openshift/console/pull/1196) * Adjust modal height at landscape orientation so that buttons aren't beneath viewport on ios. [#1229](https://github.com/openshift/console/pull/1229) * Update default operator image [#1198](https://github.com/openshift/console/pull/1198) * Updated Resource Quota dashboard layout [#1222](https://github.com/openshift/console/pull/1222) * Add missing OpenShift Dedicated option to getProductName [#1232](https://github.com/openshift/console/pull/1232) * Fix bug where cluster name is incorrect in kubeconfig created from se… [#1195](https://github.com/openshift/console/pull/1195) * Align line-height for copy-to-clipboard to match height of copy button [#1234](https://github.com/openshift/console/pull/1234) * Apply table--layout-fixed to images table... [#1212](https://github.com/openshift/console/pull/1212) * Fix runtime error on machine set and machine deployment details pages [#1187](https://github.com/openshift/console/pull/1187) [rhbz#1684217](https://bugzilla.redhat.com/show_bug.cgi?id=1684217) * Update README for OpenShift 4.0 and CI changes [#1219](https://github.com/openshift/console/pull/1219) * Change dropdown units for consistency on PVC form [#1228](https://github.com/openshift/console/pull/1228) * Show community operators, warn on details [#1178](https://github.com/openshift/console/pull/1178) * [Full changelog](https://github.com/openshift/console/compare/d10fb8b637562015a0c704e72855e2d0c318783c...24942e86dd5bef0b17c1e33bfcd386b450c49b19) ### [console-operator](https://github.com/openshift/console-operator) * Restrict console OAuthClient redirect to `/auth/callback` path [#161](https://github.com/openshift/console-operator/pull/161) * bump deps [#163](https://github.com/openshift/console-operator/pull/163) * Validate URLs from the CR file and additional unit tests for ocp tag [#152](https://github.com/openshift/console-operator/pull/152) * Validate properties in CRD [#165](https://github.com/openshift/console-operator/pull/165) * Change unit test to use cleaner error output [#160](https://github.com/openshift/console-operator/pull/160) * [Full changelog](https://github.com/openshift/console-operator/compare/32ed7c037c4037d4cb34c6abeeebaaa121748a2e...8665600274308fbda0f66e7ed8a0e5cc5c0bb7d9) ### [grafana](https://github.com/openshift/grafana) * bus: support multiple dispatch in one transaction [#12203](https://github.com/openshift/grafana/pull/12203) * Set current org when adding/removing user to org [#12263](https://github.com/openshift/grafana/pull/12263) * Copy correct annotation props when creating a snapshot [#12317](https://github.com/openshift/grafana/pull/12317) * #11607 Cleanup time of temporary files is now configurable [#12274](https://github.com/openshift/grafana/pull/12274) * ldap: allow use of DN in group_search_filter_user_attribute and member_of [#10970](https://github.com/openshift/grafana/pull/10970) * expose session and transaction helpers to other services [#12322](https://github.com/openshift/grafana/pull/12322) * Fix regressions after save modal changes [#12350](https://github.com/openshift/grafana/pull/12350) * Fix dashboard drop down links [#12345](https://github.com/openshift/grafana/pull/12345) * graph: fix legend decimals precision calculation [#12123](https://github.com/openshift/grafana/pull/12123) * Make sure to process panels in collapsed rows when exporting dashboard [#12346](https://github.com/openshift/grafana/pull/12346) * build: fix signing of multiple rpm packages [#12363](https://github.com/openshift/grafana/pull/12363) * Fix error in InfluxDB query [#12325](https://github.com/openshift/grafana/pull/12325) * Conditionally select a field to return in ResponseParser for InfluxDB [#12018](https://github.com/openshift/grafana/pull/12018) * Pass configured/auth headers to a Datasource. [#11643](https://github.com/openshift/grafana/pull/11643) * Karma to Jest: history_ctrl [#12367](https://github.com/openshift/grafana/pull/12367) * fix "Cloudwatch panel does not allow arbitrary variable values in query" [#11990](https://github.com/openshift/grafana/pull/11990) * Return a 404 when deleting a datasource through the API if it doesn't… [#12387](https://github.com/openshift/grafana/pull/12387) * Set $rootScope in DatasourceSrv [#12383](https://github.com/openshift/grafana/pull/12383) * Fix selecting current dashboard from search does not reload dashboard [#12392](https://github.com/openshift/grafana/pull/12392) * enhance error message if phantomjs executable is not found [#12198](https://github.com/openshift/grafana/pull/12198) * routing: allows routes to be added to existing groups [#12396](https://github.com/openshift/grafana/pull/12396) * Fix typo [#12407](https://github.com/openshift/grafana/pull/12407) * Set correct text in drop down when variable is present in url [#12395](https://github.com/openshift/grafana/pull/12395) * docs: update installation instructions [#12399](https://github.com/openshift/grafana/pull/12399) * login: fix layout issues [#12412](https://github.com/openshift/grafana/pull/12412) * Fix footer CSS issue [#12441](https://github.com/openshift/grafana/pull/12441) * Make colorization of prefix and postfix optional in singlestat [#11892](https://github.com/openshift/grafana/pull/11892) * Revert "auth proxy: use real ip when validating white listed ip's" [#12444](https://github.com/openshift/grafana/pull/12444) * Fix: Log close (ie flush) was done too early, before final shutdown log [#12439](https://github.com/openshift/grafana/pull/12439) * Fix HTTP-API admin doc [#12502](https://github.com/openshift/grafana/pull/12502) * Karma to Jest: elasticsearch datasource [#12493](https://github.com/openshift/grafana/pull/12493) * [c35c1d72](https://github.com/openshift/grafana/commit/c35c1d72) * [52b475f9](https://github.com/openshift/grafana/commit/52b475f9) * [7f166668](https://github.com/openshift/grafana/commit/7f166668) * [d6631222](https://github.com/openshift/grafana/commit/d6631222) * [84af0332](https://github.com/openshift/grafana/commit/84af0332) * [afee29be](https://github.com/openshift/grafana/commit/afee29be) * mysql,mssql: improve $__timeFilter, $__timeFrom, $__timeTo macros [#12402](https://github.com/openshift/grafana/pull/12402) * Fix links not updating after changing variables [#12518](https://github.com/openshift/grafana/pull/12518) * Prometheus heatmap: fix unhandled error when some points are missing [#12511](https://github.com/openshift/grafana/pull/12511) * Fix datasource sorting with template variables [#12521](https://github.com/openshift/grafana/pull/12521) * Query field refactorings to support external plugins [#12284](https://github.com/openshift/grafana/pull/12284) * Karma to Jest: 3 data sources [#12496](https://github.com/openshift/grafana/pull/12496) * Fix freezing browser when loading plugin [#12585](https://github.com/openshift/grafana/pull/12585) * Prevent scroll on focus for iframe [#12586](https://github.com/openshift/grafana/pull/12586) * Explore Datasource selector [#12596](https://github.com/openshift/grafana/pull/12596) * [f0508aa5](https://github.com/openshift/grafana/commit/f0508aa5) * Adding eval_data to alerts query results [#12624](https://github.com/openshift/grafana/pull/12624) * Explore: calculate query interval based on available width [#12634](https://github.com/openshift/grafana/pull/12634) * Dont parse empty explore state from url [#12630](https://github.com/openshift/grafana/pull/12630) * Use url params for explore state [#12631](https://github.com/openshift/grafana/pull/12631) * [660dc09f](https://github.com/openshift/grafana/commit/660dc09f) * [c63f1425](https://github.com/openshift/grafana/commit/c63f1425) * [3fa2ec07](https://github.com/openshift/grafana/commit/3fa2ec07) * [29291f88](https://github.com/openshift/grafana/commit/29291f88) * Make prometheus value formatting more robust [#12617](https://github.com/openshift/grafana/pull/12617) * CloudWatch GetMetricData support [#11624](https://github.com/openshift/grafana/pull/11624) * [608303f4](https://github.com/openshift/grafana/commit/608303f4) * migrated jquery.flot.events to ts [#11469](https://github.com/openshift/grafana/pull/11469) * Id validation of CloudWatch GetMetricData [#12690](https://github.com/openshift/grafana/pull/12690) * Add Polish złoty to currency formatters [#12691](https://github.com/openshift/grafana/pull/12691) * Interval and range in query template variable [#12597](https://github.com/openshift/grafana/pull/12597) * Karma to Jest: graph_ctrl [#12692](https://github.com/openshift/grafana/pull/12692) * Datasource for Grafana logging platform [#12675](https://github.com/openshift/grafana/pull/12675) * postgres; escape ssl mode parameter [#12678](https://github.com/openshift/grafana/pull/12678) * CloudWatch backend return 400 if user input error [#12698](https://github.com/openshift/grafana/pull/12698) * docs: mentation that config changes requires restart. [#12699](https://github.com/openshift/grafana/pull/12699) * Karma to Jest: influx query_ctrl [#12702](https://github.com/openshift/grafana/pull/12702) * Karma to Jest: completer [#12704](https://github.com/openshift/grafana/pull/12704) * Karma to Jest: graphite query_ctrl [#12706](https://github.com/openshift/grafana/pull/12706) * fix failing test due to time diff issues [#12707](https://github.com/openshift/grafana/pull/12707) * fix invalid reference [#12709](https://github.com/openshift/grafana/pull/12709) * adjust table header contrast for the light theme [#12672](https://github.com/openshift/grafana/pull/12672) * Docs: Prometheus template query variables [#12693](https://github.com/openshift/grafana/pull/12693) * Karma to Jest: variable_srv_init [#12723](https://github.com/openshift/grafana/pull/12723) * Add tslib to TS compiler [#12718](https://github.com/openshift/grafana/pull/12718) * elasticsearch: fix index patterns [#12734](https://github.com/openshift/grafana/pull/12734) * built a component for delete button in tables [#12665](https://github.com/openshift/grafana/pull/12665) * SQL datasources - backend refactor [#12730](https://github.com/openshift/grafana/pull/12730) * removed unused class from the deletebutton pr [#12740](https://github.com/openshift/grafana/pull/12740) * Karma to Jest: singlestat [#12737](https://github.com/openshift/grafana/pull/12737) * Karma to Jest: backend_srv [#12742](https://github.com/openshift/grafana/pull/12742) * Karma to Jest: heatmap_ctrl [#12745](https://github.com/openshift/grafana/pull/12745) * Use metric column as prefix when returning multiple value columns [#12679](https://github.com/openshift/grafana/pull/12679) * change units to include characters for power of 2 and 3 [#12744](https://github.com/openshift/grafana/pull/12744) * Adding Cloudwatch AWS/AppSync metrics and dimensions [#12301](https://github.com/openshift/grafana/pull/12301) * add AWS/DX metrics and dimension to cloudwatch [#12762](https://github.com/openshift/grafana/pull/12762) * Added BurstBalance metric to list of AWS RDS metrics. [#12561](https://github.com/openshift/grafana/pull/12561) * Karma to Jest: prometheus datasource [#12771](https://github.com/openshift/grafana/pull/12771) * fix custom variable quoting in sql* query interpolations [#12791](https://github.com/openshift/grafana/pull/12791) * Add new Redshift metrics and dimensions for Cloudwatch datasource [#12063](https://github.com/openshift/grafana/pull/12063) * table link color fix [#12774](https://github.com/openshift/grafana/pull/12774) * remove alias from postgres $__timeGroup macro [#12760](https://github.com/openshift/grafana/pull/12760) * Add auto_assign_org_id to defaults.ini [#12802](https://github.com/openshift/grafana/pull/12802) * Karma to Jest: remove tests [#12808](https://github.com/openshift/grafana/pull/12808) * Karma to Jest: OpenTSDB datasource [#12819](https://github.com/openshift/grafana/pull/12819) * Karma to Jest: variable_srv [#12787](https://github.com/openshift/grafana/pull/12787) * Merges the Grafana docker build into the main repository. [#12798](https://github.com/openshift/grafana/pull/12798) * unix socket docs [#12823](https://github.com/openshift/grafana/pull/12823) * Mssql: add logo [#12746](https://github.com/openshift/grafana/pull/12746) * Explore: Add history to query fields [#12799](https://github.com/openshift/grafana/pull/12799) * Explore: show message if queries did not return data [#12813](https://github.com/openshift/grafana/pull/12813) * WIP: Fit panels to screen height [#12796](https://github.com/openshift/grafana/pull/12796) * Explore: prometheus query helpers [#12821](https://github.com/openshift/grafana/pull/12821) * fix missing * [#12835](https://github.com/openshift/grafana/pull/12835) * Fix issue with secret fields after updating datasource [#12834](https://github.com/openshift/grafana/pull/12834) * Fixing bug in url query reader and added test cases [#12815](https://github.com/openshift/grafana/pull/12815) * Add fill mode to fill in previously seen value when point is missing to SQL datasources [#12753](https://github.com/openshift/grafana/pull/12753) * Explore: expand recording rules for queries [#12846](https://github.com/openshift/grafana/pull/12846) * Delete button for team members page [#12856](https://github.com/openshift/grafana/pull/12856) * Add example OR search_filter to docs [#12848](https://github.com/openshift/grafana/pull/12848) * Convert URL-like text to links in plugins readme [#12843](https://github.com/openshift/grafana/pull/12843) * Refactor setting fillmode [#12880](https://github.com/openshift/grafana/pull/12880) * show teams on profile [#12838](https://github.com/openshift/grafana/pull/12838) * Support client certificates for LDAP servers [#12807](https://github.com/openshift/grafana/pull/12807) * Use uid when linking to dashboards internally in a dashboard [#12844](https://github.com/openshift/grafana/pull/12844) * Support timeFilter in query templating for InfluxDB [#12598](https://github.com/openshift/grafana/pull/12598) * Karma to Jest: share_modal_ctrl [#12809](https://github.com/openshift/grafana/pull/12809) * WIP Karma to Jest: heatmap renderer (refactor) [#12897](https://github.com/openshift/grafana/pull/12897) * [postgres] add timescaledb option to postgres datasource [#12680](https://github.com/openshift/grafana/pull/12680) * Karma to Jest: rename and cleanup [#12914](https://github.com/openshift/grafana/pull/12914) * GitLab authentication backend [#11314](https://github.com/openshift/grafana/pull/11314) * Fix typo [#12879](https://github.com/openshift/grafana/pull/12879) * Set User-Agent header in datasource proxied requests [#12909](https://github.com/openshift/grafana/pull/12909) * Doc - fix broken link [#12947](https://github.com/openshift/grafana/pull/12947) * add $__unixEpochGroup and $__unixEpochGroupAlias to sql datasources [#12891](https://github.com/openshift/grafana/pull/12891) * Login button issue in light theme [#12955](https://github.com/openshift/grafana/pull/12955) * Provisioning: Should allow one default datasource per organisation [#12921](https://github.com/openshift/grafana/pull/12921) * dsproxy: interpolate route url [#12974](https://github.com/openshift/grafana/pull/12974) * Explore: Fix initial state in split view [#12873](https://github.com/openshift/grafana/pull/12873) * [8f875951](https://github.com/openshift/grafana/commit/8f875951) * Explore: Filter out existing labels in label suggestions [#12874](https://github.com/openshift/grafana/pull/12874) * [75db4d8e](https://github.com/openshift/grafana/commit/75db4d8e) * Explore: still show rate hint if query is complex [#12876](https://github.com/openshift/grafana/pull/12876) * [dd796bfb](https://github.com/openshift/grafana/commit/dd796bfb) * Explore: Fix label filtering for rate queries [#12893](https://github.com/openshift/grafana/pull/12893) * Fix: Template variables are executing excessive queries [#12959](https://github.com/openshift/grafana/pull/12959) * [5f81c879](https://github.com/openshift/grafana/commit/5f81c879) * Update notifications.md [#12994](https://github.com/openshift/grafana/pull/12994) * tests: fix missing tests (with .jest suffix) [#13012](https://github.com/openshift/grafana/pull/13012) * Heatmap: fix tooltip and crosshair in firefox [#12999](https://github.com/openshift/grafana/pull/12999) * Replacing variable interpolation in "All value" value [#12967](https://github.com/openshift/grafana/pull/12967) * [ad9f38ae](https://github.com/openshift/grafana/commit/ad9f38ae) * animation during slow login [#12939](https://github.com/openshift/grafana/pull/12939) * docs: How to get started with Grafana for the first time [#12919](https://github.com/openshift/grafana/pull/12919) * Update provisioning.md [#13056](https://github.com/openshift/grafana/pull/13056) * [9423e3e1](https://github.com/openshift/grafana/commit/9423e3e1) * [36bc8b77](https://github.com/openshift/grafana/commit/36bc8b77) * [eef41cbc](https://github.com/openshift/grafana/commit/eef41cbc) * * master: (30 commits) [0e647db4](https://github.com/openshift/grafana/commit/0e647db4) * alerting: invert sendOnce to sendReminder [#12161](https://github.com/openshift/grafana/pull/12161) * * master: (84 commits) [6cd83e18](https://github.com/openshift/grafana/commit/6cd83e18) * * fork/bus_multi_dispatch: [0cfdebf0](https://github.com/openshift/grafana/commit/0cfdebf0) * * master: [ffda5efc](https://github.com/openshift/grafana/commit/ffda5efc) * * master: (95 commits) [d31c7bc6](https://github.com/openshift/grafana/commit/d31c7bc6) * [6d2136b8](https://github.com/openshift/grafana/commit/6d2136b8) * [34e448c6](https://github.com/openshift/grafana/commit/34e448c6) * Alerting notification reminder [#12145](https://github.com/openshift/grafana/pull/12145) * added Bitcoin as a currency option [#13125](https://github.com/openshift/grafana/pull/13125) * [wip]added empty list cta to team list [#12854](https://github.com/openshift/grafana/pull/12854) * [01a1737d](https://github.com/openshift/grafana/commit/01a1737d) * [09efcbc2](https://github.com/openshift/grafana/commit/09efcbc2) * [bb68cb6e](https://github.com/openshift/grafana/commit/bb68cb6e) * [dd2b6c70](https://github.com/openshift/grafana/commit/dd2b6c70) * [c5de5ed5](https://github.com/openshift/grafana/commit/c5de5ed5) * [6c6be9cf](https://github.com/openshift/grafana/commit/6c6be9cf) * [1a051ce3](https://github.com/openshift/grafana/commit/1a051ce3) * [6766028d](https://github.com/openshift/grafana/commit/6766028d) * [6b656094](https://github.com/openshift/grafana/commit/6b656094) * [e5900680](https://github.com/openshift/grafana/commit/e5900680) * [1849e938](https://github.com/openshift/grafana/commit/1849e938) * [046ee8ef](https://github.com/openshift/grafana/commit/046ee8ef) * [f4006911](https://github.com/openshift/grafana/commit/f4006911) * [8392fe5c](https://github.com/openshift/grafana/commit/8392fe5c) * [95a5a613](https://github.com/openshift/grafana/commit/95a5a613) * [fa170b3c](https://github.com/openshift/grafana/commit/fa170b3c) * [107c0d81](https://github.com/openshift/grafana/commit/107c0d81) * [24eafa45](https://github.com/openshift/grafana/commit/24eafa45) * [1c0a1882](https://github.com/openshift/grafana/commit/1c0a1882) * [1dd2bce0](https://github.com/openshift/grafana/commit/1dd2bce0) * [9e054775](https://github.com/openshift/grafana/commit/9e054775) * [cd49f2d4](https://github.com/openshift/grafana/commit/cd49f2d4) * [928353c6](https://github.com/openshift/grafana/commit/928353c6) * [6220dec0](https://github.com/openshift/grafana/commit/6220dec0) * [a05d694d](https://github.com/openshift/grafana/commit/a05d694d) * [6c7984a8](https://github.com/openshift/grafana/commit/6c7984a8) * [682c684d](https://github.com/openshift/grafana/commit/682c684d) * [d26caccc](https://github.com/openshift/grafana/commit/d26caccc) * [19dcc1f4](https://github.com/openshift/grafana/commit/19dcc1f4) * [aacf5559](https://github.com/openshift/grafana/commit/aacf5559) * [3f4c808c](https://github.com/openshift/grafana/commit/3f4c808c) * [1d711924](https://github.com/openshift/grafana/commit/1d711924) * [734118de](https://github.com/openshift/grafana/commit/734118de) * [d7ddab95](https://github.com/openshift/grafana/commit/d7ddab95) * [6613f114](https://github.com/openshift/grafana/commit/6613f114) * [b8af68e0](https://github.com/openshift/grafana/commit/b8af68e0) * [5c3b80b4](https://github.com/openshift/grafana/commit/5c3b80b4) * [67edb9e9](https://github.com/openshift/grafana/commit/67edb9e9) * [5c25844c](https://github.com/openshift/grafana/commit/5c25844c) * [3b6454ab](https://github.com/openshift/grafana/commit/3b6454ab) * [d8606ddf](https://github.com/openshift/grafana/commit/d8606ddf) * [3f5d325e](https://github.com/openshift/grafana/commit/3f5d325e) * [15c8ef6c](https://github.com/openshift/grafana/commit/15c8ef6c) * [5b3b0295](https://github.com/openshift/grafana/commit/5b3b0295) * [4acf4f9d](https://github.com/openshift/grafana/commit/4acf4f9d) * [998bb6eb](https://github.com/openshift/grafana/commit/998bb6eb) * [1b5486ae](https://github.com/openshift/grafana/commit/1b5486ae) * [ea110b59](https://github.com/openshift/grafana/commit/ea110b59) * [7177f194](https://github.com/openshift/grafana/commit/7177f194) * [70daa56a](https://github.com/openshift/grafana/commit/70daa56a) * [650e2faf](https://github.com/openshift/grafana/commit/650e2faf) * [265d5daf](https://github.com/openshift/grafana/commit/265d5daf) * [de917dfc](https://github.com/openshift/grafana/commit/de917dfc) * [82e60125](https://github.com/openshift/grafana/commit/82e60125) * postgres: graphical query builder [#11081](https://github.com/openshift/grafana/pull/11081) * Fix error when new variables created but not yet added/saved [#13133](https://github.com/openshift/grafana/pull/13133) * [432e203d](https://github.com/openshift/grafana/commit/432e203d) * [151e950e](https://github.com/openshift/grafana/commit/151e950e) * [99133c4f](https://github.com/openshift/grafana/commit/99133c4f) * [00c0b71f](https://github.com/openshift/grafana/commit/00c0b71f) * [c9ae585d](https://github.com/openshift/grafana/commit/c9ae585d) * [0aea60bf](https://github.com/openshift/grafana/commit/0aea60bf) * upgrade to golang 1.11 [#13031](https://github.com/openshift/grafana/pull/13031) * docs: default paths in the docker container. [#13165](https://github.com/openshift/grafana/pull/13165) * [32094735](https://github.com/openshift/grafana/commit/32094735) * make default values for alerting configurable [#13170](https://github.com/openshift/grafana/pull/13170) * Add min time interval support for SQL datasources [#13148](https://github.com/openshift/grafana/pull/13148) * Alert Teams - Adding Action to view the graph by its public URL. [#13167](https://github.com/openshift/grafana/pull/13167) * [1415bed0](https://github.com/openshift/grafana/commit/1415bed0) * [4391209f](https://github.com/openshift/grafana/commit/4391209f) * [035b0ab0](https://github.com/openshift/grafana/commit/035b0ab0) * [298c088d](https://github.com/openshift/grafana/commit/298c088d) * [267b96cb](https://github.com/openshift/grafana/commit/267b96cb) * Add jsonnet with grafonnet-lib to provisioning docs [#13209](https://github.com/openshift/grafana/pull/13209) * Fix postgres quoting to handle non-string values [#13184](https://github.com/openshift/grafana/pull/13184) * Fix query builder queries for interval start [#13200](https://github.com/openshift/grafana/pull/13200) * added id tag to Panels for html bookmarking on longer Dashboards [#12260](https://github.com/openshift/grafana/pull/12260) * [17e99bb3](https://github.com/openshift/grafana/commit/17e99bb3) * fix: Dashboard permissions now shows correctly [#13208](https://github.com/openshift/grafana/pull/13208) * Sort results from GetDashboardTags [#11681](https://github.com/openshift/grafana/pull/11681) * Adding Centrify configuration for Oauth [#1](https://github.com/openshift/grafana/pull/1) * Add Centrify documentation for generic_oauth [#13217](https://github.com/openshift/grafana/pull/13217) * (prometheus) get label name/value from series API [#12251](https://github.com/openshift/grafana/pull/12251) * (prometheus) add annotation option to treat series value as timestamp [#11789](https://github.com/openshift/grafana/pull/11789) * [metrics]enabled = false should disable the /metrics endpoint. [#13259](https://github.com/openshift/grafana/pull/13259) * Fix anonymous usage stats for authentication types [#13253](https://github.com/openshift/grafana/pull/13253) * use pluginName consistently when upgrading plugins [#13269](https://github.com/openshift/grafana/pull/13269) * Added underline to links in table [#13274](https://github.com/openshift/grafana/pull/13274) * Fix gauge display accuracy for "percent (0.0-1.0)" [#13270](https://github.com/openshift/grafana/pull/13270) * docs: include active directory ldap example and restructure [#13252](https://github.com/openshift/grafana/pull/13252) * [6cdfff52](https://github.com/openshift/grafana/commit/6cdfff52) * fix hipchat color code used for "no data" notifications [#13284](https://github.com/openshift/grafana/pull/13284) * [108a2019](https://github.com/openshift/grafana/commit/108a2019) * [9caa0301](https://github.com/openshift/grafana/commit/9caa0301) * [89ea47e7](https://github.com/openshift/grafana/commit/89ea47e7) * [7c27a87d](https://github.com/openshift/grafana/commit/7c27a87d) * [d173ebe7](https://github.com/openshift/grafana/commit/d173ebe7) * Permissions to redux [#13273](https://github.com/openshift/grafana/pull/13273) * [dd0b1d84](https://github.com/openshift/grafana/commit/dd0b1d84) * Team member labels [#13285](https://github.com/openshift/grafana/pull/13285) * Fix some megacheck issues [#13295](https://github.com/openshift/grafana/pull/13295) * Add documentation for postgres query builder [#13293](https://github.com/openshift/grafana/pull/13293) * * master: (3328 commits) [abd5a74e](https://github.com/openshift/grafana/commit/abd5a74e) * * master: [835a7533](https://github.com/openshift/grafana/commit/835a7533) * annotations: allows template variables to be used in tag filter [#10163](https://github.com/openshift/grafana/pull/10163) * Internal metrics: starts counters at zero [#13279](https://github.com/openshift/grafana/pull/13279) * * brian2222-patch-1: [6938fd5f](https://github.com/openshift/grafana/commit/6938fd5f) * Explore: Add multiline syntax highlighting to query field [#13282](https://github.com/openshift/grafana/pull/13282) * Moves docker/ to devenv/docker [#13300](https://github.com/openshift/grafana/pull/13300) * moves files from /tests to more appropriate folders [#13301](https://github.com/openshift/grafana/pull/13301) * Fix setting test [#13307](https://github.com/openshift/grafana/pull/13307) * removes unused files [#13305](https://github.com/openshift/grafana/pull/13305) * disable codecov [#13317](https://github.com/openshift/grafana/pull/13317) * Fix megacheck issues [#13330](https://github.com/openshift/grafana/pull/13330) * Explore: Fix click to filter for recording rule expressions [#13339](https://github.com/openshift/grafana/pull/13339) * Don't use unnest in queries for redshift compatibility [#13342](https://github.com/openshift/grafana/pull/13342) * Fix misspelled authentication in Auth overview doc [#13363](https://github.com/openshift/grafana/pull/13363) * Explore: Query field fixes [#13367](https://github.com/openshift/grafana/pull/13367) * Fix megacheck issues [#13374](https://github.com/openshift/grafana/pull/13374) * Explore: Fix label suggestions for recording rules [#13341](https://github.com/openshift/grafana/pull/13341) * Fix misspell issues [#13383](https://github.com/openshift/grafana/pull/13383) * [1599806b](https://github.com/openshift/grafana/commit/1599806b) * added span with folder title that is shown for recently and starred [#12128](https://github.com/openshift/grafana/pull/12128) * [87bee3d9](https://github.com/openshift/grafana/commit/87bee3d9) * Update Configuration.md [#12716](https://github.com/openshift/grafana/pull/12716) * Fix metric-segment options displaying after blur [#13388](https://github.com/openshift/grafana/pull/13388) * Fix #13356, where tooltips do not display individual values on stacked graphs [#13394](https://github.com/openshift/grafana/pull/13394) * Explore: label selector for logging [#12877](https://github.com/openshift/grafana/pull/12877) * devenv: adds script for creating many dashboards with alerts [#13398](https://github.com/openshift/grafana/pull/13398) * Fix spelling of your and you're [#13410](https://github.com/openshift/grafana/pull/13410) * 13312 legend table width [#13407](https://github.com/openshift/grafana/pull/13407) * Remove option r from ln command since its not working everywhere [#13413](https://github.com/openshift/grafana/pull/13413) * Concurrent render limits [#13401](https://github.com/openshift/grafana/pull/13401) * provisioning: changed update interval default 3 to 10 seconds [#13391](https://github.com/openshift/grafana/pull/13391) * Remove .dropdown-menu-open on body click fixes #13409 [#13417](https://github.com/openshift/grafana/pull/13417) * alerting: move all notification conditions to defaultShouldNotify [#13402](https://github.com/openshift/grafana/pull/13402) * filter NULL values in column value suggestion query [#13427](https://github.com/openshift/grafana/pull/13427) * imguploader: Add support for ECS credential provider for S3 [#13424](https://github.com/openshift/grafana/pull/13424) * Fix goconst issues [#13392](https://github.com/openshift/grafana/pull/13392) * Add goconst to CircleCI [#13432](https://github.com/openshift/grafana/pull/13432) * Prevent refresh on fixed time window [#12219](https://github.com/openshift/grafana/pull/12219) * resolve symlink on each run [#13360](https://github.com/openshift/grafana/pull/13360) * switch button for org users [#13380](https://github.com/openshift/grafana/pull/13380) * fixes to dark theme for Explore mode [#13445](https://github.com/openshift/grafana/pull/13445) * [f2307f92](https://github.com/openshift/grafana/commit/f2307f92) * Compile TS on precommit hook [#13448](https://github.com/openshift/grafana/pull/13448) * Plugin list to react [#13438](https://github.com/openshift/grafana/pull/13438) * Adding AWS Isolated Regions [#13458](https://github.com/openshift/grafana/pull/13458) * Grafana high availability (ha) test setup [#13439](https://github.com/openshift/grafana/pull/13439) * Limit number of time series in explore [#13408](https://github.com/openshift/grafana/pull/13408) * [3ba01953](https://github.com/openshift/grafana/commit/3ba01953) * [c2686781](https://github.com/openshift/grafana/commit/c2686781) * [dc1535cf](https://github.com/openshift/grafana/commit/dc1535cf) * [c67327d7](https://github.com/openshift/grafana/commit/c67327d7) * [785f35b1](https://github.com/openshift/grafana/commit/785f35b1) * [c282f391](https://github.com/openshift/grafana/commit/c282f391) * [b6a918ba](https://github.com/openshift/grafana/commit/b6a918ba) * [186dcc00](https://github.com/openshift/grafana/commit/186dcc00) * [2628ef7e](https://github.com/openshift/grafana/commit/2628ef7e) * [66c95991](https://github.com/openshift/grafana/commit/66c95991) * [284d0b7e](https://github.com/openshift/grafana/commit/284d0b7e) * [0507ff69](https://github.com/openshift/grafana/commit/0507ff69) * [26d9e924](https://github.com/openshift/grafana/commit/26d9e924) * [9748a948](https://github.com/openshift/grafana/commit/9748a948) * [9b90b835](https://github.com/openshift/grafana/commit/9b90b835) * [aedd5181](https://github.com/openshift/grafana/commit/aedd5181) * [cdcb14f3](https://github.com/openshift/grafana/commit/cdcb14f3) * Stackdriver Datasource - Fixes #6733 [#13289](https://github.com/openshift/grafana/pull/13289) * [3081e0f8](https://github.com/openshift/grafana/commit/3081e0f8) * 13411 react api key [#13444](https://github.com/openshift/grafana/pull/13444) * Explore: Store UI state in URL [#13463](https://github.com/openshift/grafana/pull/13463) * cli: fix reset-admin-password [#13422](https://github.com/openshift/grafana/pull/13422) * Update to ldap.md [#13480](https://github.com/openshift/grafana/pull/13480) * typo in sample.ini [#13481](https://github.com/openshift/grafana/pull/13481) * Fix megacheck issues [#13470](https://github.com/openshift/grafana/pull/13470) * [f37a60dc](https://github.com/openshift/grafana/commit/f37a60dc) * Explore: jump to explore from panels with mixed datasources [#13416](https://github.com/openshift/grafana/pull/13416) * [a0e1a1a1](https://github.com/openshift/grafana/commit/a0e1a1a1) * use alert state changes counter for alert notification dedupping. [#13477](https://github.com/openshift/grafana/pull/13477) * Transaction issues for alert reminder [#13440](https://github.com/openshift/grafana/pull/13440) * Update configuration doc to include socket at [server] [#13499](https://github.com/openshift/grafana/pull/13499) * Testdata tables [#13500](https://github.com/openshift/grafana/pull/13500) * [09b68132](https://github.com/openshift/grafana/commit/09b68132) * Org users to react [#13488](https://github.com/openshift/grafana/pull/13488) * Revert "Org users to react" [#13502](https://github.com/openshift/grafana/pull/13502) * build: automatically publish releases to grafana.com. [#13508](https://github.com/openshift/grafana/pull/13508) * Fix issue with updating role permissions #13507 [#13509](https://github.com/openshift/grafana/pull/13509) * [81c44eb3](https://github.com/openshift/grafana/commit/81c44eb3) * stackdriver: adds missing nginject attribute [#13511](https://github.com/openshift/grafana/pull/13511) * centered dashboard icon in search with flexbox [#13514](https://github.com/openshift/grafana/pull/13514) * Fix megacheck issues [#13506](https://github.com/openshift/grafana/pull/13506) * * grafana/master: [5425b76e](https://github.com/openshift/grafana/commit/5425b76e) * * grafana/master: (29 commits) [14d816af](https://github.com/openshift/grafana/commit/14d816af) * * grafana/master: (51 commits) [56927e55](https://github.com/openshift/grafana/commit/56927e55) * * grafana/master: (104 commits) [27e96179](https://github.com/openshift/grafana/commit/27e96179) * * grafana/master: (187 commits) [8c86a1c4](https://github.com/openshift/grafana/commit/8c86a1c4) * * grafana/master: (52 commits) [8cfad74a](https://github.com/openshift/grafana/commit/8cfad74a) * * grafana/master: [048fd87a](https://github.com/openshift/grafana/commit/048fd87a) * * grafana/master: (368 commits) [9f4d4a93](https://github.com/openshift/grafana/commit/9f4d4a93) * * grafana/master: (127 commits) [b4fad40c](https://github.com/openshift/grafana/commit/b4fad40c) * Keep trailing slash for datasource proxy requests [#13326](https://github.com/openshift/grafana/pull/13326) * move timeFrom, timeTo, unixEpochFrom and unixEpochTo macros to sql_engine [#13498](https://github.com/openshift/grafana/pull/13498) * Explore: typeahead and render performance improvements [#13491](https://github.com/openshift/grafana/pull/13491) * Moving contributing.md to top level [#13525](https://github.com/openshift/grafana/pull/13525) * Explore: fix rate hint for series with null values [#13528](https://github.com/openshift/grafana/pull/13528) * Explore: reset typeahead on cursor move [#13530](https://github.com/openshift/grafana/pull/13530) * ux: misc react migration fixes and info box style improvement [#13534](https://github.com/openshift/grafana/pull/13534) * Explore: resize graph on window resize [#13529](https://github.com/openshift/grafana/pull/13529) * Fixed typo in query editor placeholder text. [#13543](https://github.com/openshift/grafana/pull/13543) * fix gofmt tests output [#13538](https://github.com/openshift/grafana/pull/13538) * Fix text overflow on playlist search #13464 [#13548](https://github.com/openshift/grafana/pull/13548) * docs: fix minor typos [#13547](https://github.com/openshift/grafana/pull/13547) * [e1c77f63](https://github.com/openshift/grafana/commit/e1c77f63) * New data source as separate page [#13537](https://github.com/openshift/grafana/pull/13537) * fix for influxdb annotation issue that caused text to be shown twice [#13556](https://github.com/openshift/grafana/pull/13556) * stackdriver metric name fix. Fixes #13562 [#13564](https://github.com/openshift/grafana/pull/13564) * Stackdriver filter wildcards [#13496](https://github.com/openshift/grafana/pull/13496) * Explore: do not show default suggestions after expressions [#13542](https://github.com/openshift/grafana/pull/13542) * Explore: trigger a query field render to fix highlighting [#13541](https://github.com/openshift/grafana/pull/13541) * Explore: compact state URLs [#13540](https://github.com/openshift/grafana/pull/13540) * ux: minor update to look of stackdriver query help [#13550](https://github.com/openshift/grafana/pull/13550) * Remove duplicate labels in the datasource query [#13570](https://github.com/openshift/grafana/pull/13570) * Improve Stackdriver provisioning docs [#13574](https://github.com/openshift/grafana/pull/13574) * Stackdriver heatmap support. Fixes #13559 [#13490](https://github.com/openshift/grafana/pull/13490) * Update debian.md [#13584](https://github.com/openshift/grafana/pull/13584) * fix CloudWatch id validation [#13583](https://github.com/openshift/grafana/pull/13583) * Render Dashboard Row drag handle only in edit mode [#13568](https://github.com/openshift/grafana/pull/13568) * cloudwatch: automatically set graph yaxis unit [#13571](https://github.com/openshift/grafana/pull/13571) * Update rpm.md [#13585](https://github.com/openshift/grafana/pull/13585) * Update windows.md [#13586](https://github.com/openshift/grafana/pull/13586) * Update mac.md [#13587](https://github.com/openshift/grafana/pull/13587) * [30fca2b1](https://github.com/openshift/grafana/commit/30fca2b1) * wip: whats new for 5.3 [#13403](https://github.com/openshift/grafana/pull/13403) * Explore: highlight typed text in suggestions [#13536](https://github.com/openshift/grafana/pull/13536) * [3932e4db](https://github.com/openshift/grafana/commit/3932e4db) * Run queries for sql data sources for panels with multiple queries concurrently [#13400](https://github.com/openshift/grafana/pull/13400) * elasticsearch: fix no limit size in terms aggregation for alerting queries [#13609](https://github.com/openshift/grafana/pull/13609) * Adding loading spinner to org pages [#13619](https://github.com/openshift/grafana/pull/13619) * fix phantomjs render of graph panel when legend displayed as table to the right [#13617](https://github.com/openshift/grafana/pull/13617) * [5b46c088](https://github.com/openshift/grafana/commit/5b46c088) * Frontend extensions [#13620](https://github.com/openshift/grafana/pull/13620) * stackdriver docs: metric query editor and annotations [#13618](https://github.com/openshift/grafana/pull/13618) * 13340 complete oauth doc [#13632](https://github.com/openshift/grafana/pull/13632) * [127b7d92](https://github.com/openshift/grafana/commit/127b7d92) * [69e0311c](https://github.com/openshift/grafana/commit/69e0311c) * Remove user form org in single org setup improvement [#13611](https://github.com/openshift/grafana/pull/13611) * [caf995bb](https://github.com/openshift/grafana/commit/caf995bb) * minor setting refactorings [#13638](https://github.com/openshift/grafana/pull/13638) * Stackdriver: Prevent filter from crashing [#13624](https://github.com/openshift/grafana/pull/13624) * Adds backend hooks service so extensions can modify index data [#13644](https://github.com/openshift/grafana/pull/13644) * updated jest to 23.10 [#13649](https://github.com/openshift/grafana/pull/13649) * Typos in plugin development documentation [#13657](https://github.com/openshift/grafana/pull/13657) * fix: label values regex for single letter labels [#13656](https://github.com/openshift/grafana/pull/1365…

…-release:4.0.0-0.7 Clayton pushed release:4.0.0-0.nightly-2019-03-04-234414 to quay.io/openshift-release-dev/ocp-release:4.0.0-0.7. Extracting the associated RHCOS build: $ oc adm release info --pullspecs quay.io/openshift-release-dev/ocp-release:4.0.0-0.7 | grep machine-os-content machine-os-content quay.io/openshift-release-dev/ocp-v4.0-art-dev@sha256:399582f711226ab1a0e76d8928ec55436dea9f8dc60976c10790d308b9d92181 $ oc image info quay.io/openshift-release-dev/ocp-v4.0-art-dev@sha256:399582f711226ab1a0e76d8928ec55436dea9f8dc60976c10790d308b9d92181 | grep version version=47.330 that's the same machine-os-content image referenced from 4.0.0-0.5, which we used for installer v0.13.0, and 4.0.0-0.6, which we used for installer v0.13.1. Renaming OPENSHIFT_INSTALL_RELEASE_IMAGE_OVERRIDE gets us CI testing of the pinned release despite openshift/release@60007df2 (Use RELEASE_IMAGE_LATEST for CVO payload, 2018-10-03, openshift/release#1793). Also comment out regions which this particular RHCOS build wasn't pushed to, leaving only: $ curl -s https://releases-rhcos.svc.ci.openshift.org/storage/releases/maipo/47.330/meta.json | jq -r '.amis[] | .name' ap-northeast-1 ap-northeast-2 ap-south-1 ap-southeast-1 ap-southeast-2 ca-central-1 eu-central-1 eu-west-1 eu-west-2 eu-west-3 sa-east-1 us-east-1 us-east-2 us-west-1 us-west-2 I'd initially expected to export the pinning environment variables in release.sh, but I've put them in build.sh here because our continuous integration tests use build.sh directly and don't go through release.sh. Using the slick, new change-log generator from [1], here's everything that changed in the update payload: $ oc adm release info --changelog ~/.local/lib/go/src --changes-from quay.io/openshift-release-dev/ocp-release:4.0.0-0.6 quay.io/openshift-release-dev/ocp-release:4.0.0-0.7 # 4.0.0-0.7 Created: 2019-03-05 18:33:12 +0000 UTC Image Digest: `sha256:641c0e4f550af59ec20349187a31751ae5108270f13332d1771935520ebf34c1` Promoted from registry.svc.ci.openshift.org/ocp/release:4.0.0-0.nightly-2019-03-04-234414 ## Changes from 4.0.0-0.6 ### Components * Kubernetes 1.12.4 ### New images * [must-gather](https://github.com/openshift/must-gather) git [8286a5dc](https://github.com/openshift/must-gather/commit/8286a5dc432e339dc79c75044424cd9c89dc634b) `sha256:8faf4b3739c952de448c69325c8c101193c0665bb149d3d2830afd2aca973413` ### Rebuilt images without code change * [cluster-config-operator](https://github.com/openshift/cluster-config-operator) git [aa1805e7](https://github.com/openshift/cluster-config-operator/commit/aa1805e73138deabbfa57772170f310e2f3097cd) `sha256:86bb159de280a6d9f81a69081090148cfad233db1b6f596a996097b56c0d6940` * [cluster-openshift-apiserver-operator](https://github.com/openshift/cluster-openshift-apiserver-operator) git [0a65fe40](https://github.com/openshift/cluster-openshift-apiserver-operator/commit/0a65fe40a74cfc6114fdaa30e2b2c24924509cda) `sha256:71f521d9cb0b1f03fe78938f90df7a0a9bdf5a45a31c65b168533e507644da34` * [cluster-storage-operator](https://github.com/openshift/cluster-storage-operator) git [b8502422](https://github.com/openshift/cluster-storage-operator/commit/b850242280b7ef2cf7631952229c0a438ec39e64) `sha256:7b9990d7f21ddd4d981701d7f1e326e3ae2041d9aafad53115a828a9f0fa8d0e` * [cluster-svcat-apiserver-operator](https://github.com/openshift/cluster-svcat-apiserver-operator) git [547648cb](https://github.com/openshift/cluster-svcat-apiserver-operator/commit/547648cb7b3f2a0d8f049f680c18ac66cd339b3f) `sha256:6edd77ad4ef48f3b29045acc0c9a57b01dcfb2c42b497ab857fa4eb27d8a841c` * [cluster-svcat-controller-manager-operator](https://github.com/openshift/cluster-svcat-controller-manager-operator) git [9261f420](https://github.com/openshift/cluster-svcat-controller-manager-operator/commit/9261f420a3db9556606c8ee0980a5e02a8f28d89) `sha256:9af8c72361b3a8bad34c44be6903e02c0f8a56b6ef4d459fce9c75ee38251093` * [configmap-reloader](https://github.com/openshift/configmap-reload) git [3c2f8572](https://github.com/openshift/configmap-reload/commit/3c2f85724078cbf7ffab56886ff32d677c386afe) `sha256:fc79d84dee4f2a998a105e94a1457eb5aabf85b1b9d1a6468aca6f8835c04408` * [container-networking-plugins-supported](https://github.com/openshift/ose-containernetworking-plugins) git [f6a58dce](https://github.com/openshift/ose-containernetworking-plugins/commit/f6a58dcec62ca740305a58a0a6b008c5e57b8943) `sha256:4a561991866a16773e965586f40a5684174229430e56ad25f15b851fe8e725ed` * [container-networking-plugins-unsupported](https://github.com/openshift/ose-containernetworking-plugins) git [f6a58dce](https://github.com/openshift/ose-containernetworking-plugins/commit/f6a58dcec62ca740305a58a0a6b008c5e57b8943) `sha256:9f720109ad203a0a0e44e0da14e2e82aefaa40e6d41accdefdc5ec2b3aed9153` * [coredns](https://github.com/openshift/coredns) git [fbcb8252](https://github.com/openshift/coredns/commit/fbcb8252a1bab3d32ecf2dd3307f798aacd0280e) `sha256:3fe76f173faaf16af80d4f865c377a4dc4db24d32c1bba4c6d3115e66a788861` * [docker-builder](https://github.com/openshift/builder) git [1a77d837](https://github.com/openshift/builder/commit/1a77d837d8d74d5dcb6f8afcadb082629b04883e) `sha256:7bcb847c457cf8bf5813e10e46058f34426560d0798ca1d80f8ee34e5fa5727b` * [docker-registry](https://github.com/openshift/image-registry) git [afcc7daa](https://github.com/openshift/image-registry/commit/afcc7daa5eeeb6a77754ae86decefade83314189) `sha256:a457ab8bc3be66c97ce6babd77e6f1c1eaff91477bd5442460f927db06a15e55` * [etcd](https://github.com/openshift/etcd) git [a0e62b48](https://github.com/openshift/etcd/commit/a0e62b48f8db8572c129fa3d3507c7ce118ab650) `sha256:6b65c7ff285c611ae17a91deff91c0585773507e7fcffec7353ea849a66bd018` * [k8s-prometheus-adapter](https://github.com/openshift/k8s-prometheus-adapter) git [815fa76b](https://github.com/openshift/k8s-prometheus-adapter/commit/815fa76bdbccfd5ee6da8f9fa45d039c4342dcdb) `sha256:4274c276fec8729ad17ff77d74188ade01e3695b3b2afa3b995081394b107857` * [kube-rbac-proxy](https://github.com/openshift/kube-rbac-proxy) git [3f271e09](https://github.com/openshift/kube-rbac-proxy/commit/3f271e0951f18276ec54e8eac936725d6d68e073) `sha256:61180c69f1cba674625bd6c85995f524bdbdde27b2d08ea7efcecd7d3427409b` * [kube-state-metrics](https://github.com/openshift/kube-state-metrics) git [2ab51c9f](https://github.com/openshift/kube-state-metrics/commit/2ab51c9f341799107ffbf7f373ab55254dc044d0) `sha256:fc9fa4ce84819c084737115feef722f49d05d43ca6f438edfbc21535e2479b2d` * [multus-cni](https://github.com/openshift/ose-multus-cni) git [61f9e088](https://github.com/openshift/ose-multus-cni/commit/61f9e0886370ea5f6093ed61d4cfefc6dadef582) `sha256:077b65e55d01d3abd114933c4e132a642a0315f83b93b05b185fa338ce09595a` * [operator-registry](https://github.com/operator-framework/operator-registry) git [0531400c](https://github.com/operator-framework/operator-registry/commit/0531400c661ef7088d71b86ff5f52892f9407a1a) `sha256:035af1a1f35a1f0d8159576460437d9d3529b4f64e0b142a8da59a5e4e056a68` * [pod](https://github.com/openshift/images) git [2f60da39](https://github.com/openshift/images/commit/2f60da39a9d2e5cc00293b8ec7ad559fcd32446a) `sha256:810ded5c25b9ec252dba6a2497d1eff9ad13a19cc3ac290ef8943b7d658803f2` * [prom-label-proxy](https://github.com/openshift/prom-label-proxy) git [46423f9d](https://github.com/openshift/prom-label-proxy/commit/46423f9d573c7d53f5727de1e2db095ae039da06) `sha256:da1d1556af41b9d71e24cdc7406e0671f3eca877a16e465e6e5bdd5ecfad6bd1` * [prometheus](https://github.com/openshift/prometheus) git [6e5fb5dc](https://github.com/openshift/prometheus/commit/6e5fb5dcb6a709bd20ea68cddc1abfcceb8a487d) `sha256:5625206aa10f98cb2306bb37621cc3a6637ef69a43713fb4f9a34ebff1d4b3ff` * [prometheus-alertmanager](https://github.com/openshift/prometheus-alertmanager) git [4617d550](https://github.com/openshift/prometheus-alertmanager/commit/4617d5502332dc41c9c885cc12ecde5069191f73) `sha256:414275a7a91f92951cae01928234aed2e0d4670fb911f0d1f189a2ee0a821c9e` * [prometheus-config-reloader](https://github.com/openshift/prometheus-operator) git [f8a0aa17](https://github.com/openshift/prometheus-operator/commit/f8a0aa170bf81ef70e16875053573a037461042d) `sha256:26c197ba809ac3cd18a79c1dde21812e97e6957e0dfc93ac6f4c50947f3dfe99` * [prometheus-node-exporter](https://github.com/openshift/node_exporter) git [f248b582](https://github.com/openshift/node_exporter/commit/f248b582878226c8a8cd650223cf981cc556eb44) `sha256:8a107dd61b46e2fd0b71e1e6c291f97ccd634fd4c759f46d9f4403c3a6f4496a` * [prometheus-operator](https://github.com/openshift/prometheus-operator) git [f8a0aa17](https://github.com/openshift/prometheus-operator/commit/f8a0aa170bf81ef70e16875053573a037461042d) `sha256:1d0dd92b072c381c0471b1b8ed6f3bc5eded95d747c87b4bbe659c1396ad63ed` * [service-catalog](https://github.com/openshift/service-catalog) git [b24ffd6f](https://github.com/openshift/service-catalog/commit/b24ffd6f826fe094a49afc04a5d62ab65490bb37) `sha256:03b053176eacf0e847d75c5ce8137455faa4c7a52623381f723de1fa87a36761` * [service-serving-cert-signer](https://github.com/openshift/service-serving-cert-signer) git [30924216](https://github.com/openshift/service-serving-cert-signer/commit/309242162ed5bcf9398fca0ba9418244ec7c6808) `sha256:032cf8f0fd7ac91f58ee670244892812cd024d8d7eee923266b9acf97ee21ac4` ### [aws-machine-controllers](https://github.com/openshift/cluster-api-provider-aws) * deps: switch cluster-api dependency to use master branch [#169](https://github.com/openshift/cluster-api-provider-aws/pull/169) * E2e ginkgo [#170](https://github.com/openshift/cluster-api-provider-aws/pull/170) * Update list of owners [#171](https://github.com/openshift/cluster-api-provider-aws/pull/171) * [Full changelog](https://github.com/openshift/cluster-api-provider-aws/compare/c0c3b9e0e8e626d74360ecb806b06c3b09df27bb...17d5aacdeb2df8898b20286970ace7d42f0c376a) ### [cli, deployer, hyperkube, hypershift, node, tests](https://github.com/openshift/ose) * update external examples [#22029](https://github.com/openshift/ose/pull/22029) * UPSTREAM: <carry>: openapi: half encoding costs [#22056](https://github.com/openshift/ose/pull/22056) * UPSTREAM: 74416: apiserver: add --minimal-shutdown-duration to delay until endpoint convergence [#22151](https://github.com/openshift/ose/pull/22151) * UPSTREAM: 74617: make audit metadata work for custom resources [#22157](https://github.com/openshift/ose/pull/22157) * Poll in bootstrap user e2e test [#22070](https://github.com/openshift/ose/pull/22070) * If the git log is empty don't error out from `release info --changelog` [#22163](https://github.com/openshift/ose/pull/22163) * UPSTREAM: 0000: retry on discovery errors in crd-discovery-available post-start hook [#22168](https://github.com/openshift/ose/pull/22168) * UPSTREAM: 00000: wait for CRD discovery to be successful once before … [#22178](https://github.com/openshift/ose/pull/22178) * add some advice to 'oc debug' for debugging nodes [#22109](https://github.com/openshift/ose/pull/22109) * Fix deads2k typo in features OWNERS [#22128](https://github.com/openshift/ose/pull/22128) * Replace all kubectl in oc adm top pod/node examples [#22152](https://github.com/openshift/ose/pull/22152) [rhbz#1470006](https://bugzilla.redhat.com/show_bug.cgi?id=1470006) * [4.0] UPSTREAM: 74306: Fix scanning of failed targets [#22136](https://github.com/openshift/ose/pull/22136) * Add openshift-integrated-oauth-server command [#21987](https://github.com/openshift/ose/pull/21987) * UPSTREAM: 74668: kube-apiserver: don't create endpoints before being ready [#22181](https://github.com/openshift/ose/pull/22181) * apiextensions: openapi ObjectMeta/TypeMeta schema only if validation spec is given [#22193](https://github.com/openshift/ose/pull/22193) * [4.0] UPSTREAM: 74524: Don't fail if iface is being used by iSCSI session [#22176](https://github.com/openshift/ose/pull/22176) * UPSTREAM: 74636: Remove reflector metrics as they currently cause a memory leak [#22180](https://github.com/openshift/ose/pull/22180) * apiextensions-apiserver: fix empty APIResource group+version handling in wait logic [#22188](https://github.com/openshift/ose/pull/22188) * Ensure clone works without `-C` for release extraction [#22184](https://github.com/openshift/ose/pull/22184) * Test conformance from 1.12 for Kube [#21995](https://github.com/openshift/ose/pull/21995) * [d42ad916](https://github.com/openshift/ose/commit/d42ad916) * [Full changelog](https://github.com/openshift/ose/compare/0cbcfc5afeab12a1b5b3f801eb247ff023e42b67...e268aada53a27b7cba51e4267d035dad207a1d8a) ### [cloud-credential-operator](https://github.com/openshift/cloud-credential-operator) * pkg/controller/utils: Fix "reutrn" -> "return" comment typo [#36](https://github.com/openshift/cloud-credential-operator/pull/36) * aws: include operator version in UserAgent for AWS API calls [#34](https://github.com/openshift/cloud-credential-operator/pull/34) * [Full changelog](https://github.com/openshift/cloud-credential-operator/compare/01bbf372a2c83bd4b1c9a433cba15808ba1e5e92...97e00568622e2a82cde1e964be7ea7c37fe85b4f) ### [cluster-authentication-operator](https://github.com/openshift/cluster-authentication-operator) * fix template synced secret names [#85](https://github.com/openshift/cluster-authentication-operator/pull/85) * Move to OsinServerConfig [#79](https://github.com/openshift/cluster-authentication-operator/pull/79) * Move to a passthrough route to support mTLS [#83](https://github.com/openshift/cluster-authentication-operator/pull/83) * [Full changelog](https://github.com/openshift/cluster-authentication-operator/compare/35879ec061749de8926fa9a14dbd687e4e052048...88650bd64069ed79a411098b481ac2416526ce0e) ### [cluster-autoscaler](https://github.com/openshift/kubernetes-autoscaler) * E2e ginkgo [#43](https://github.com/openshift/kubernetes-autoscaler/pull/43) * UPSTREAM: <carry>: openshiftmachineapi: remove unused fields [#44](https://github.com/openshift/kubernetes-autoscaler/pull/44) * [Full changelog](https://github.com/openshift/kubernetes-autoscaler/compare/d8a4a30478e04c8e97a693f99fb3ad802115171c...e1a6a0960a100132abc5f8398ff73dbb0f45ae28) ### [cluster-autoscaler-operator](https://github.com/openshift/cluster-autoscaler-operator) * Remove resource limits in operator deployment [#58](https://github.com/openshift/cluster-autoscaler-operator/pull/58) * Override default CAO image [#59](https://github.com/openshift/cluster-autoscaler-operator/pull/59) * Add tests and change StatusReporter.client to osconfig.Interface [#56](https://github.com/openshift/cluster-autoscaler-operator/pull/56) * Add cluster-critical priority to autoscaler-operator [#57](https://github.com/openshift/cluster-autoscaler-operator/pull/57) * Vendor ginkgo tests [#60](https://github.com/openshift/cluster-autoscaler-operator/pull/60) * Update list of owners [#64](https://github.com/openshift/cluster-autoscaler-operator/pull/64) * Add unit tests for Apply [#63](https://github.com/openshift/cluster-autoscaler-operator/pull/63) * [Full changelog](https://github.com/openshift/cluster-autoscaler-operator/compare/73c46659d0e2c0ac03e6e207d52ff0c025b04786...0c2284a7a7cff0e123ace8d5e43337e4cc9739e9) ### [cluster-bootstrap](https://github.com/openshift/cluster-bootstrap) * Add --tear-down-early, defaulting to true [#19](https://github.com/openshift/cluster-bootstrap/pull/19) * [Full changelog](https://github.com/openshift/cluster-bootstrap/compare/05a5c8e68f409baccdb421b9f80ce0e8841172bd...90a38fd8d9dc0b0a61214f079fd4734b034bae0c) ### [cluster-dns-operator](https://github.com/openshift/cluster-dns-operator) * status: report cluster operator version from payload [#78](https://github.com/openshift/cluster-dns-operator/pull/78) * [Full changelog](https://github.com/openshift/cluster-dns-operator/compare/ffb04ae9e56023812e55e35ac6713568ece0fbac...e4aa0a50f865e8399aeeccaf8c24f8d891cd67c2) ### [cluster-image-registry-operator](https://github.com/openshift/cluster-image-registry-operator) * disable kube/openshift api server operators before running tests [#222](https://github.com/openshift/cluster-image-registry-operator/pull/222) * Return error that happened [#224](https://github.com/openshift/cluster-image-registry-operator/pull/224) * test/e2e: Do not wait for PVC to change its status from "Pending" to something else [#226](https://github.com/openshift/cluster-image-registry-operator/pull/226) * [Full changelog](https://github.com/openshift/cluster-image-registry-operator/compare/80600487ebb150b67f6356c7e521953dbe94abbf...689aa65b90644aead5b579acce2725a08bd70f93) ### [cluster-ingress-operator](https://github.com/openshift/cluster-ingress-operator) * controller/certificate: move cert generation to cert controller [#141](https://github.com/openshift/cluster-ingress-operator/pull/141) * controller/certificate: relocate CA publishing [#142](https://github.com/openshift/cluster-ingress-operator/pull/142) * Publish global secret with default certificates and keys [#139](https://github.com/openshift/cluster-ingress-operator/pull/139) * Simplify ClusterOperatorStatus comparison [#148](https://github.com/openshift/cluster-ingress-operator/pull/148) * Add function for name of in-use default certificate [#149](https://github.com/openshift/cluster-ingress-operator/pull/149) * [Full changelog](https://github.com/openshift/cluster-ingress-operator/compare/09d14db8edbc265299bd70095136359a45dc8b55...e53dfea77b35656f105c41d5c1a3bcb2bc6fbcba) ### [cluster-kube-apiserver-operator](https://github.com/openshift/cluster-kube-apiserver-operator) * do not default the internal registry hostname to anything [#311](https://github.com/openshift/cluster-kube-apiserver-operator/pull/311) * switch to pull if not present [#313](https://github.com/openshift/cluster-kube-apiserver-operator/pull/313) * library-go: fix retry logic when getting installer pod self-reference [#310](https://github.com/openshift/cluster-kube-apiserver-operator/pull/310) * bump(library-go): improve logging of what causes a static pod rollout [#315](https://github.com/openshift/cluster-kube-apiserver-operator/pull/315) * [Full changelog](https://github.com/openshift/cluster-kube-apiserver-operator/compare/fa75c058db5e9c9de6b0a4674029f869a6062555...4c34fbfd2b4382e366d45f5e9acd07fb8da1ee9d) ### [cluster-kube-controller-manager-operator](https://github.com/openshift/cluster-kube-controller-manager-operator) * library-go: fix retry logic when getting installer pod self-reference [#185](https://github.com/openshift/cluster-kube-controller-manager-operator/pull/185) * bump(library-go): improve logging of what causes a static pod rollout [#187](https://github.com/openshift/cluster-kube-controller-manager-operator/pull/187) * [Full changelog](https://github.com/openshift/cluster-kube-controller-manager-operator/compare/53ff6d862bbd258b8e6ee1bc7016ec36a333ef1a...52a2f710ae90f0624c47040bf6d9b0ad55538de0) ### [cluster-kube-scheduler-operator](https://github.com/openshift/cluster-kube-scheduler-operator) * bump to get versions, status, upgradeable, servicemonitors, installer pod fixes [#66](https://github.com/openshift/cluster-kube-scheduler-operator/pull/66) * Change kubescheduler type name from instance to cluster [#68](https://github.com/openshift/cluster-kube-scheduler-operator/pull/68) * switch to pull if not present from always [#69](https://github.com/openshift/cluster-kube-scheduler-operator/pull/69) * [Full changelog](https://github.com/openshift/cluster-kube-scheduler-operator/compare/7066c963cb2b35227767f19f565f0a3816a54a01...c68e8b1af27033dec9ca9cd36c831b0796cef798) ### [cluster-machine-approver](https://github.com/openshift/cluster-machine-approver) * Approve CSRs based on machine status [#10](https://github.com/openshift/cluster-machine-approver/pull/10) * [Full changelog](https://github.com/openshift/cluster-machine-approver/compare/2fbc6a6b2b4dd37e953aeb8331dc4edc17ead993...c4ba3024437a348a03ee1459cdf9823d7c6de4a8) ### [cluster-monitoring-operator](https://github.com/openshift/cluster-monitoring-operator) * jsonnet: programmatically remove limits [#273](https://github.com/openshift/cluster-monitoring-operator/pull/273) * pkg/tasks/prometheus: update kubelet serving CA if it changed [#271](https://github.com/openshift/cluster-monitoring-operator/pull/271) * jsonnet: No shared tooltip and use node-exporter metrics in adapter [#272](https://github.com/openshift/cluster-monitoring-operator/pull/272) * *: Enable etcd monitoring by default [#239](https://github.com/openshift/cluster-monitoring-operator/pull/239) * pkg/tasks: create service monitor at the end of each tasks. [#274](https://github.com/openshift/cluster-monitoring-operator/pull/274) * assets: Drop accidental and high cardinality metrics [#276](https://github.com/openshift/cluster-monitoring-operator/pull/276) * hack: Adapt generate etcd secret script to 4.0 [#277](https://github.com/openshift/cluster-monitoring-operator/pull/277) * clusteroperator: Report the appropriate injected status version [#278](https://github.com/openshift/cluster-monitoring-operator/pull/278) * [Full changelog](https://github.com/openshift/cluster-monitoring-operator/compare/3609aea4fc2defca4cfef8f2e46677d9f45946ad...25fd008f1fb34cc27332fcc59f6821ef01c306a6) ### [cluster-network-operator](https://github.com/openshift/cluster-network-operator) * HACKING: add steps for how to build the node image. [#107](https://github.com/openshift/cluster-network-operator/pull/107) * [Full changelog](https://github.com/openshift/cluster-network-operator/compare/15204e63ace4000afa531193af95894371d4cfe0...b13c79c1ae6290bbc472c0ac260855e26d71dfd3) ### [cluster-node-tuned](https://github.com/openshift/openshift-tuned) * Lower the number of times tuned needs to be reloaded. [#15](https://github.com/openshift/openshift-tuned/pull/15) * [Full changelog](https://github.com/openshift/openshift-tuned/compare/278ee72d9c6d5302c00ee83356d0574c63c26e3d...b580cb6f52a0e352aebbe0e368d5ec020230c532) ### [cluster-node-tuning-operator](https://github.com/openshift/cluster-node-tuning-operator) * Retry loop for creating Tuned CR. [#42](https://github.com/openshift/cluster-node-tuning-operator/pull/42) * status: report cluster operator version from payload [#43](https://github.com/openshift/cluster-node-tuning-operator/pull/43) * [Full changelog](https://github.com/openshift/cluster-node-tuning-operator/compare/b5c14debb9963f2239270d61f4b05719ca7d2df0...900d59d3aa7a59aa31318bc25efc5df1e994e4b9) ### [cluster-openshift-controller-manager-operator](https://github.com/openshift/cluster-openshift-controller-manager-operator) * bump(*): pick up https://github.com/openshift/library-go/pull/284 [#78](https://github.com/openshift/cluster-openshift-controller-manager-operator/pull/78) * Drop etcd metrics [#80](https://github.com/openshift/cluster-openshift-controller-manager-operator/pull/80) * [Full changelog](https://github.com/openshift/cluster-openshift-controller-manager-operator/compare/3f79b51b7a524109e6803dd0f772d4dbf3b62c61...6656fd894295a9924c6bf5de244586705508e595) ### [cluster-samples-operator](https://github.com/openshift/cluster-samples-operator) * Goto tbr [#111](https://github.com/openshift/cluster-samples-operator/pull/111) * Cvo tweaks [#115](https://github.com/openshift/cluster-samples-operator/pull/115) * Add must-gather image reference and ImageStream [#116](https://github.com/openshift/cluster-samples-operator/pull/116) * [Full changelog](https://github.com/openshift/cluster-samples-operator/compare/f00132453a0b88b8393a27b16debc8eb89f80c38...204cf2ba6a3a12d2344f69d19f539ebc31f39683) ### [cluster-version-operator](https://github.com/openshift/cluster-version-operator) * pkg/cvo: report actual metrics on Complete() [#124](https://github.com/openshift/cluster-version-operator/pull/124) * [Full changelog](https://github.com/openshift/cluster-version-operator/compare/70c0232ed95e4b0e0cd78efdcdec6f2410f592bb...bcf8bf290bc7d0090769b4722831dbb157b75d01) ### [console](https://github.com/openshift/console) * Only store swagger.json definitions [#1226](https://github.com/openshift/console/pull/1226) * Improve console-e2e test reliability in CI [#1236](https://github.com/openshift/console/pull/1236) * Edit secret page returns to previous page when cancelling [#1196](https://github.com/openshift/console/pull/1196) * Adjust modal height at landscape orientation so that buttons aren't beneath viewport on ios. [#1229](https://github.com/openshift/console/pull/1229) * Update default operator image [#1198](https://github.com/openshift/console/pull/1198) * Updated Resource Quota dashboard layout [#1222](https://github.com/openshift/console/pull/1222) * Add missing OpenShift Dedicated option to getProductName [#1232](https://github.com/openshift/console/pull/1232) * Fix bug where cluster name is incorrect in kubeconfig created from se… [#1195](https://github.com/openshift/console/pull/1195) * Align line-height for copy-to-clipboard to match height of copy button [#1234](https://github.com/openshift/console/pull/1234) * Apply table--layout-fixed to images table... [#1212](https://github.com/openshift/console/pull/1212) * Fix runtime error on machine set and machine deployment details pages [#1187](https://github.com/openshift/console/pull/1187) [rhbz#1684217](https://bugzilla.redhat.com/show_bug.cgi?id=1684217) * Update README for OpenShift 4.0 and CI changes [#1219](https://github.com/openshift/console/pull/1219) * Change dropdown units for consistency on PVC form [#1228](https://github.com/openshift/console/pull/1228) * Show community operators, warn on details [#1178](https://github.com/openshift/console/pull/1178) * [Full changelog](https://github.com/openshift/console/compare/d10fb8b637562015a0c704e72855e2d0c318783c...24942e86dd5bef0b17c1e33bfcd386b450c49b19) ### [console-operator](https://github.com/openshift/console-operator) * Restrict console OAuthClient redirect to `/auth/callback` path [#161](https://github.com/openshift/console-operator/pull/161) * bump deps [#163](https://github.com/openshift/console-operator/pull/163) * Validate URLs from the CR file and additional unit tests for ocp tag [#152](https://github.com/openshift/console-operator/pull/152) * Validate properties in CRD [#165](https://github.com/openshift/console-operator/pull/165) * Change unit test to use cleaner error output [#160](https://github.com/openshift/console-operator/pull/160) * [Full changelog](https://github.com/openshift/console-operator/compare/32ed7c037c4037d4cb34c6abeeebaaa121748a2e...8665600274308fbda0f66e7ed8a0e5cc5c0bb7d9) ### [grafana](https://github.com/openshift/grafana) * bus: support multiple dispatch in one transaction [#12203](https://github.com/openshift/grafana/pull/12203) * Set current org when adding/removing user to org [#12263](https://github.com/openshift/grafana/pull/12263) * Copy correct annotation props when creating a snapshot [#12317](https://github.com/openshift/grafana/pull/12317) * #11607 Cleanup time of temporary files is now configurable [#12274](https://github.com/openshift/grafana/pull/12274) * ldap: allow use of DN in group_search_filter_user_attribute and member_of [#10970](https://github.com/openshift/grafana/pull/10970) * expose session and transaction helpers to other services [#12322](https://github.com/openshift/grafana/pull/12322) * Fix regressions after save modal changes [#12350](https://github.com/openshift/grafana/pull/12350) * Fix dashboard drop down links [#12345](https://github.com/openshift/grafana/pull/12345) * graph: fix legend decimals precision calculation [#12123](https://github.com/openshift/grafana/pull/12123) * Make sure to process panels in collapsed rows when exporting dashboard [#12346](https://github.com/openshift/grafana/pull/12346) * build: fix signing of multiple rpm packages [#12363](https://github.com/openshift/grafana/pull/12363) * Fix error in InfluxDB query [#12325](https://github.com/openshift/grafana/pull/12325) * Conditionally select a field to return in ResponseParser for InfluxDB [#12018](https://github.com/openshift/grafana/pull/12018) * Pass configured/auth headers to a Datasource. [#11643](https://github.com/openshift/grafana/pull/11643) * Karma to Jest: history_ctrl [#12367](https://github.com/openshift/grafana/pull/12367) * fix "Cloudwatch panel does not allow arbitrary variable values in query" [#11990](https://github.com/openshift/grafana/pull/11990) * Return a 404 when deleting a datasource through the API if it doesn't… [#12387](https://github.com/openshift/grafana/pull/12387) * Set $rootScope in DatasourceSrv [#12383](https://github.com/openshift/grafana/pull/12383) * Fix selecting current dashboard from search does not reload dashboard [#12392](https://github.com/openshift/grafana/pull/12392) * enhance error message if phantomjs executable is not found [#12198](https://github.com/openshift/grafana/pull/12198) * routing: allows routes to be added to existing groups [#12396](https://github.com/openshift/grafana/pull/12396) * Fix typo [#12407](https://github.com/openshift/grafana/pull/12407) * Set correct text in drop down when variable is present in url [#12395](https://github.com/openshift/grafana/pull/12395) * docs: update installation instructions [#12399](https://github.com/openshift/grafana/pull/12399) * login: fix layout issues [#12412](https://github.com/openshift/grafana/pull/12412) * Fix footer CSS issue [#12441](https://github.com/openshift/grafana/pull/12441) * Make colorization of prefix and postfix optional in singlestat [#11892](https://github.com/openshift/grafana/pull/11892) * Revert "auth proxy: use real ip when validating white listed ip's" [#12444](https://github.com/openshift/grafana/pull/12444) * Fix: Log close (ie flush) was done too early, before final shutdown log [#12439](https://github.com/openshift/grafana/pull/12439) * Fix HTTP-API admin doc [#12502](https://github.com/openshift/grafana/pull/12502) * Karma to Jest: elasticsearch datasource [#12493](https://github.com/openshift/grafana/pull/12493) * [c35c1d72](https://github.com/openshift/grafana/commit/c35c1d72) * [52b475f9](https://github.com/openshift/grafana/commit/52b475f9) * [7f166668](https://github.com/openshift/grafana/commit/7f166668) * [d6631222](https://github.com/openshift/grafana/commit/d6631222) * [84af0332](https://github.com/openshift/grafana/commit/84af0332) * [afee29be](https://github.com/openshift/grafana/commit/afee29be) * mysql,mssql: improve $__timeFilter, $__timeFrom, $__timeTo macros [#12402](https://github.com/openshift/grafana/pull/12402) * Fix links not updating after changing variables [#12518](https://github.com/openshift/grafana/pull/12518) * Prometheus heatmap: fix unhandled error when some points are missing [#12511](https://github.com/openshift/grafana/pull/12511) * Fix datasource sorting with template variables [#12521](https://github.com/openshift/grafana/pull/12521) * Query field refactorings to support external plugins [#12284](https://github.com/openshift/grafana/pull/12284) * Karma to Jest: 3 data sources [#12496](https://github.com/openshift/grafana/pull/12496) * Fix freezing browser when loading plugin [#12585](https://github.com/openshift/grafana/pull/12585) * Prevent scroll on focus for iframe [#12586](https://github.com/openshift/grafana/pull/12586) * Explore Datasource selector [#12596](https://github.com/openshift/grafana/pull/12596) * [f0508aa5](https://github.com/openshift/grafana/commit/f0508aa5) * Adding eval_data to alerts query results [#12624](https://github.com/openshift/grafana/pull/12624) * Explore: calculate query interval based on available width [#12634](https://github.com/openshift/grafana/pull/12634) * Dont parse empty explore state from url [#12630](https://github.com/openshift/grafana/pull/12630) * Use url params for explore state [#12631](https://github.com/openshift/grafana/pull/12631) * [660dc09f](https://github.com/openshift/grafana/commit/660dc09f) * [c63f1425](https://github.com/openshift/grafana/commit/c63f1425) * [3fa2ec07](https://github.com/openshift/grafana/commit/3fa2ec07) * [29291f88](https://github.com/openshift/grafana/commit/29291f88) * Make prometheus value formatting more robust [#12617](https://github.com/openshift/grafana/pull/12617) * CloudWatch GetMetricData support [#11624](https://github.com/openshift/grafana/pull/11624) * [608303f4](https://github.com/openshift/grafana/commit/608303f4) * migrated jquery.flot.events to ts [#11469](https://github.com/openshift/grafana/pull/11469) * Id validation of CloudWatch GetMetricData [#12690](https://github.com/openshift/grafana/pull/12690) * Add Polish złoty to currency formatters [#12691](https://github.com/openshift/grafana/pull/12691) * Interval and range in query template variable [#12597](https://github.com/openshift/grafana/pull/12597) * Karma to Jest: graph_ctrl [#12692](https://github.com/openshift/grafana/pull/12692) * Datasource for Grafana logging platform [#12675](https://github.com/openshift/grafana/pull/12675) * postgres; escape ssl mode parameter [#12678](https://github.com/openshift/grafana/pull/12678) * CloudWatch backend return 400 if user input error [#12698](https://github.com/openshift/grafana/pull/12698) * docs: mentation that config changes requires restart. [#12699](https://github.com/openshift/grafana/pull/12699) * Karma to Jest: influx query_ctrl [#12702](https://github.com/openshift/grafana/pull/12702) * Karma to Jest: completer [#12704](https://github.com/openshift/grafana/pull/12704) * Karma to Jest: graphite query_ctrl [#12706](https://github.com/openshift/grafana/pull/12706) * fix failing test due to time diff issues [#12707](https://github.com/openshift/grafana/pull/12707) * fix invalid reference [#12709](https://github.com/openshift/grafana/pull/12709) * adjust table header contrast for the light theme [#12672](https://github.com/openshift/grafana/pull/12672) * Docs: Prometheus template query variables [#12693](https://github.com/openshift/grafana/pull/12693) * Karma to Jest: variable_srv_init [#12723](https://github.com/openshift/grafana/pull/12723) * Add tslib to TS compiler [#12718](https://github.com/openshift/grafana/pull/12718) * elasticsearch: fix index patterns [#12734](https://github.com/openshift/grafana/pull/12734) * built a component for delete button in tables [#12665](https://github.com/openshift/grafana/pull/12665) * SQL datasources - backend refactor [#12730](https://github.com/openshift/grafana/pull/12730) * removed unused class from the deletebutton pr [#12740](https://github.com/openshift/grafana/pull/12740) * Karma to Jest: singlestat [#12737](https://github.com/openshift/grafana/pull/12737) * Karma to Jest: backend_srv [#12742](https://github.com/openshift/grafana/pull/12742) * Karma to Jest: heatmap_ctrl [#12745](https://github.com/openshift/grafana/pull/12745) * Use metric column as prefix when returning multiple value columns [#12679](https://github.com/openshift/grafana/pull/12679) * change units to include characters for power of 2 and 3 [#12744](https://github.com/openshift/grafana/pull/12744) * Adding Cloudwatch AWS/AppSync metrics and dimensions [#12301](https://github.com/openshift/grafana/pull/12301) * add AWS/DX metrics and dimension to cloudwatch [#12762](https://github.com/openshift/grafana/pull/12762) * Added BurstBalance metric to list of AWS RDS metrics. [#12561](https://github.com/openshift/grafana/pull/12561) * Karma to Jest: prometheus datasource [#12771](https://github.com/openshift/grafana/pull/12771) * fix custom variable quoting in sql* query interpolations [#12791](https://github.com/openshift/grafana/pull/12791) * Add new Redshift metrics and dimensions for Cloudwatch datasource [#12063](https://github.com/openshift/grafana/pull/12063) * table link color fix [#12774](https://github.com/openshift/grafana/pull/12774) * remove alias from postgres $__timeGroup macro [#12760](https://github.com/openshift/grafana/pull/12760) * Add auto_assign_org_id to defaults.ini [#12802](https://github.com/openshift/grafana/pull/12802) * Karma to Jest: remove tests [#12808](https://github.com/openshift/grafana/pull/12808) * Karma to Jest: OpenTSDB datasource [#12819](https://github.com/openshift/grafana/pull/12819) * Karma to Jest: variable_srv [#12787](https://github.com/openshift/grafana/pull/12787) * Merges the Grafana docker build into the main repository. [#12798](https://github.com/openshift/grafana/pull/12798) * unix socket docs [#12823](https://github.com/openshift/grafana/pull/12823) * Mssql: add logo [#12746](https://github.com/openshift/grafana/pull/12746) * Explore: Add history to query fields [#12799](https://github.com/openshift/grafana/pull/12799) * Explore: show message if queries did not return data [#12813](https://github.com/openshift/grafana/pull/12813) * WIP: Fit panels to screen height [#12796](https://github.com/openshift/grafana/pull/12796) * Explore: prometheus query helpers [#12821](https://github.com/openshift/grafana/pull/12821) * fix missing * [#12835](https://github.com/openshift/grafana/pull/12835) * Fix issue with secret fields after updating datasource [#12834](https://github.com/openshift/grafana/pull/12834) * Fixing bug in url query reader and added test cases [#12815](https://github.com/openshift/grafana/pull/12815) * Add fill mode to fill in previously seen value when point is missing to SQL datasources [#12753](https://github.com/openshift/grafana/pull/12753) * Explore: expand recording rules for queries [#12846](https://github.com/openshift/grafana/pull/12846) * Delete button for team members page [#12856](https://github.com/openshift/grafana/pull/12856) * Add example OR search_filter to docs [#12848](https://github.com/openshift/grafana/pull/12848) * Convert URL-like text to links in plugins readme [#12843](https://github.com/openshift/grafana/pull/12843) * Refactor setting fillmode [#12880](https://github.com/openshift/grafana/pull/12880) * show teams on profile [#12838](https://github.com/openshift/grafana/pull/12838) * Support client certificates for LDAP servers [#12807](https://github.com/openshift/grafana/pull/12807) * Use uid when linking to dashboards internally in a dashboard [#12844](https://github.com/openshift/grafana/pull/12844) * Support timeFilter in query templating for InfluxDB [#12598](https://github.com/openshift/grafana/pull/12598) * Karma to Jest: share_modal_ctrl [#12809](https://github.com/openshift/grafana/pull/12809) * WIP Karma to Jest: heatmap renderer (refactor) [#12897](https://github.com/openshift/grafana/pull/12897) * [postgres] add timescaledb option to postgres datasource [#12680](https://github.com/openshift/grafana/pull/12680) * Karma to Jest: rename and cleanup [#12914](https://github.com/openshift/grafana/pull/12914) * GitLab authentication backend [#11314](https://github.com/openshift/grafana/pull/11314) * Fix typo [#12879](https://github.com/openshift/grafana/pull/12879) * Set User-Agent header in datasource proxied requests [#12909](https://github.com/openshift/grafana/pull/12909) * Doc - fix broken link [#12947](https://github.com/openshift/grafana/pull/12947) * add $__unixEpochGroup and $__unixEpochGroupAlias to sql datasources [#12891](https://github.com/openshift/grafana/pull/12891) * Login button issue in light theme [#12955](https://github.com/openshift/grafana/pull/12955) * Provisioning: Should allow one default datasource per organisation [#12921](https://github.com/openshift/grafana/pull/12921) * dsproxy: interpolate route url [#12974](https://github.com/openshift/grafana/pull/12974) * Explore: Fix initial state in split view [#12873](https://github.com/openshift/grafana/pull/12873) * [8f875951](https://github.com/openshift/grafana/commit/8f875951) * Explore: Filter out existing labels in label suggestions [#12874](https://github.com/openshift/grafana/pull/12874) * [75db4d8e](https://github.com/openshift/grafana/commit/75db4d8e) * Explore: still show rate hint if query is complex [#12876](https://github.com/openshift/grafana/pull/12876) * [dd796bfb](https://github.com/openshift/grafana/commit/dd796bfb) * Explore: Fix label filtering for rate queries [#12893](https://github.com/openshift/grafana/pull/12893) * Fix: Template variables are executing excessive queries [#12959](https://github.com/openshift/grafana/pull/12959) * [5f81c879](https://github.com/openshift/grafana/commit/5f81c879) * Update notifications.md [#12994](https://github.com/openshift/grafana/pull/12994) * tests: fix missing tests (with .jest suffix) [#13012](https://github.com/openshift/grafana/pull/13012) * Heatmap: fix tooltip and crosshair in firefox [#12999](https://github.com/openshift/grafana/pull/12999) * Replacing variable interpolation in "All value" value [#12967](https://github.com/openshift/grafana/pull/12967) * [ad9f38ae](https://github.com/openshift/grafana/commit/ad9f38ae) * animation during slow login [#12939](https://github.com/openshift/grafana/pull/12939) * docs: How to get started with Grafana for the first time [#12919](https://github.com/openshift/grafana/pull/12919) * Update provisioning.md [#13056](https://github.com/openshift/grafana/pull/13056) * [9423e3e1](https://github.com/openshift/grafana/commit/9423e3e1) * [36bc8b77](https://github.com/openshift/grafana/commit/36bc8b77) * [eef41cbc](https://github.com/openshift/grafana/commit/eef41cbc) * * master: (30 commits) [0e647db4](https://github.com/openshift/grafana/commit/0e647db4) * alerting: invert sendOnce to sendReminder [#12161](https://github.com/openshift/grafana/pull/12161) * * master: (84 commits) [6cd83e18](https://github.com/openshift/grafana/commit/6cd83e18) * * fork/bus_multi_dispatch: [0cfdebf0](https://github.com/openshift/grafana/commit/0cfdebf0) * * master: [ffda5efc](https://github.com/openshift/grafana/commit/ffda5efc) * * master: (95 commits) [d31c7bc6](https://github.com/openshift/grafana/commit/d31c7bc6) * [6d2136b8](https://github.com/openshift/grafana/commit/6d2136b8) * [34e448c6](https://github.com/openshift/grafana/commit/34e448c6) * Alerting notification reminder [#12145](https://github.com/openshift/grafana/pull/12145) * added Bitcoin as a currency option [#13125](https://github.com/openshift/grafana/pull/13125) * [wip]added empty list cta to team list [#12854](https://github.com/openshift/grafana/pull/12854) * [01a1737d](https://github.com/openshift/grafana/commit/01a1737d) * [09efcbc2](https://github.com/openshift/grafana/commit/09efcbc2) * [bb68cb6e](https://github.com/openshift/grafana/commit/bb68cb6e) * [dd2b6c70](https://github.com/openshift/grafana/commit/dd2b6c70) * [c5de5ed5](https://github.com/openshift/grafana/commit/c5de5ed5) * [6c6be9cf](https://github.com/openshift/grafana/commit/6c6be9cf) * [1a051ce3](https://github.com/openshift/grafana/commit/1a051ce3) * [6766028d](https://github.com/openshift/grafana/commit/6766028d) * [6b656094](https://github.com/openshift/grafana/commit/6b656094) * [e5900680](https://github.com/openshift/grafana/commit/e5900680) * [1849e938](https://github.com/openshift/grafana/commit/1849e938) * [046ee8ef](https://github.com/openshift/grafana/commit/046ee8ef) * [f4006911](https://github.com/openshift/grafana/commit/f4006911) * [8392fe5c](https://github.com/openshift/grafana/commit/8392fe5c) * [95a5a613](https://github.com/openshift/grafana/commit/95a5a613) * [fa170b3c](https://github.com/openshift/grafana/commit/fa170b3c) * [107c0d81](https://github.com/openshift/grafana/commit/107c0d81) * [24eafa45](https://github.com/openshift/grafana/commit/24eafa45) * [1c0a1882](https://github.com/openshift/grafana/commit/1c0a1882) * [1dd2bce0](https://github.com/openshift/grafana/commit/1dd2bce0) * [9e054775](https://github.com/openshift/grafana/commit/9e054775) * [cd49f2d4](https://github.com/openshift/grafana/commit/cd49f2d4) * [928353c6](https://github.com/openshift/grafana/commit/928353c6) * [6220dec0](https://github.com/openshift/grafana/commit/6220dec0) * [a05d694d](https://github.com/openshift/grafana/commit/a05d694d) * [6c7984a8](https://github.com/openshift/grafana/commit/6c7984a8) * [682c684d](https://github.com/openshift/grafana/commit/682c684d) * [d26caccc](https://github.com/openshift/grafana/commit/d26caccc) * [19dcc1f4](https://github.com/openshift/grafana/commit/19dcc1f4) * [aacf5559](https://github.com/openshift/grafana/commit/aacf5559) * [3f4c808c](https://github.com/openshift/grafana/commit/3f4c808c) * [1d711924](https://github.com/openshift/grafana/commit/1d711924) * [734118de](https://github.com/openshift/grafana/commit/734118de) * [d7ddab95](https://github.com/openshift/grafana/commit/d7ddab95) * [6613f114](https://github.com/openshift/grafana/commit/6613f114) * [b8af68e0](https://github.com/openshift/grafana/commit/b8af68e0) * [5c3b80b4](https://github.com/openshift/grafana/commit/5c3b80b4) * [67edb9e9](https://github.com/openshift/grafana/commit/67edb9e9) * [5c25844c](https://github.com/openshift/grafana/commit/5c25844c) * [3b6454ab](https://github.com/openshift/grafana/commit/3b6454ab) * [d8606ddf](https://github.com/openshift/grafana/commit/d8606ddf) * [3f5d325e](https://github.com/openshift/grafana/commit/3f5d325e) * [15c8ef6c](https://github.com/openshift/grafana/commit/15c8ef6c) * [5b3b0295](https://github.com/openshift/grafana/commit/5b3b0295) * [4acf4f9d](https://github.com/openshift/grafana/commit/4acf4f9d) * [998bb6eb](https://github.com/openshift/grafana/commit/998bb6eb) * [1b5486ae](https://github.com/openshift/grafana/commit/1b5486ae) * [ea110b59](https://github.com/openshift/grafana/commit/ea110b59) * [7177f194](https://github.com/openshift/grafana/commit/7177f194) * [70daa56a](https://github.com/openshift/grafana/commit/70daa56a) * [650e2faf](https://github.com/openshift/grafana/commit/650e2faf) * [265d5daf](https://github.com/openshift/grafana/commit/265d5daf) * [de917dfc](https://github.com/openshift/grafana/commit/de917dfc) * [82e60125](https://github.com/openshift/grafana/commit/82e60125) * postgres: graphical query builder [#11081](https://github.com/openshift/grafana/pull/11081) * Fix error when new variables created but not yet added/saved [#13133](https://github.com/openshift/grafana/pull/13133) * [432e203d](https://github.com/openshift/grafana/commit/432e203d) * [151e950e](https://github.com/openshift/grafana/commit/151e950e) * [99133c4f](https://github.com/openshift/grafana/commit/99133c4f) * [00c0b71f](https://github.com/openshift/grafana/commit/00c0b71f) * [c9ae585d](https://github.com/openshift/grafana/commit/c9ae585d) * [0aea60bf](https://github.com/openshift/grafana/commit/0aea60bf) * upgrade to golang 1.11 [#13031](https://github.com/openshift/grafana/pull/13031) * docs: default paths in the docker container. [#13165](https://github.com/openshift/grafana/pull/13165) * [32094735](https://github.com/openshift/grafana/commit/32094735) * make default values for alerting configurable [#13170](https://github.com/openshift/grafana/pull/13170) * Add min time interval support for SQL datasources [#13148](https://github.com/openshift/grafana/pull/13148) * Alert Teams - Adding Action to view the graph by its public URL. [#13167](https://github.com/openshift/grafana/pull/13167) * [1415bed0](https://github.com/openshift/grafana/commit/1415bed0) * [4391209f](https://github.com/openshift/grafana/commit/4391209f) * [035b0ab0](https://github.com/openshift/grafana/commit/035b0ab0) * [298c088d](https://github.com/openshift/grafana/commit/298c088d) * [267b96cb](https://github.com/openshift/grafana/commit/267b96cb) * Add jsonnet with grafonnet-lib to provisioning docs [#13209](https://github.com/openshift/grafana/pull/13209) * Fix postgres quoting to handle non-string values [#13184](https://github.com/openshift/grafana/pull/13184) * Fix query builder queries for interval start [#13200](https://github.com/openshift/grafana/pull/13200) * added id tag to Panels for html bookmarking on longer Dashboards [#12260](https://github.com/openshift/grafana/pull/12260) * [17e99bb3](https://github.com/openshift/grafana/commit/17e99bb3) * fix: Dashboard permissions now shows correctly [#13208](https://github.com/openshift/grafana/pull/13208) * Sort results from GetDashboardTags [#11681](https://github.com/openshift/grafana/pull/11681) * Adding Centrify configuration for Oauth [#1](https://github.com/openshift/grafana/pull/1) * Add Centrify documentation for generic_oauth [#13217](https://github.com/openshift/grafana/pull/13217) * (prometheus) get label name/value from series API [#12251](https://github.com/openshift/grafana/pull/12251) * (prometheus) add annotation option to treat series value as timestamp [#11789](https://github.com/openshift/grafana/pull/11789) * [metrics]enabled = false should disable the /metrics endpoint. [#13259](https://github.com/openshift/grafana/pull/13259) * Fix anonymous usage stats for authentication types [#13253](https://github.com/openshift/grafana/pull/13253) * use pluginName consistently when upgrading plugins [#13269](https://github.com/openshift/grafana/pull/13269) * Added underline to links in table [#13274](https://github.com/openshift/grafana/pull/13274) * Fix gauge display accuracy for "percent (0.0-1.0)" [#13270](https://github.com/openshift/grafana/pull/13270) * docs: include active directory ldap example and restructure [#13252](https://github.com/openshift/grafana/pull/13252) * [6cdfff52](https://github.com/openshift/grafana/commit/6cdfff52) * fix hipchat color code used for "no data" notifications [#13284](https://github.com/openshift/grafana/pull/13284) * [108a2019](https://github.com/openshift/grafana/commit/108a2019) * [9caa0301](https://github.com/openshift/grafana/commit/9caa0301) * [89ea47e7](https://github.com/openshift/grafana/commit/89ea47e7) * [7c27a87d](https://github.com/openshift/grafana/commit/7c27a87d) * [d173ebe7](https://github.com/openshift/grafana/commit/d173ebe7) * Permissions to redux [#13273](https://github.com/openshift/grafana/pull/13273) * [dd0b1d84](https://github.com/openshift/grafana/commit/dd0b1d84) * Team member labels [#13285](https://github.com/openshift/grafana/pull/13285) * Fix some megacheck issues [#13295](https://github.com/openshift/grafana/pull/13295) * Add documentation for postgres query builder [#13293](https://github.com/openshift/grafana/pull/13293) * * master: (3328 commits) [abd5a74e](https://github.com/openshift/grafana/commit/abd5a74e) * * master: [835a7533](https://github.com/openshift/grafana/commit/835a7533) * annotations: allows template variables to be used in tag filter [#10163](https://github.com/openshift/grafana/pull/10163) * Internal metrics: starts counters at zero [#13279](https://github.com/openshift/grafana/pull/13279) * * brian2222-patch-1: [6938fd5f](https://github.com/openshift/grafana/commit/6938fd5f) * Explore: Add multiline syntax highlighting to query field [#13282](https://github.com/openshift/grafana/pull/13282) * Moves docker/ to devenv/docker [#13300](https://github.com/openshift/grafana/pull/13300) * moves files from /tests to more appropriate folders [#13301](https://github.com/openshift/grafana/pull/13301) * Fix setting test [#13307](https://github.com/openshift/grafana/pull/13307) * removes unused files [#13305](https://github.com/openshift/grafana/pull/13305) * disable codecov [#13317](https://github.com/openshift/grafana/pull/13317) * Fix megacheck issues [#13330](https://github.com/openshift/grafana/pull/13330) * Explore: Fix click to filter for recording rule expressions [#13339](https://github.com/openshift/grafana/pull/13339) * Don't use unnest in queries for redshift compatibility [#13342](https://github.com/openshift/grafana/pull/13342) * Fix misspelled authentication in Auth overview doc [#13363](https://github.com/openshift/grafana/pull/13363) * Explore: Query field fixes [#13367](https://github.com/openshift/grafana/pull/13367) * Fix megacheck issues [#13374](https://github.com/openshift/grafana/pull/13374) * Explore: Fix label suggestions for recording rules [#13341](https://github.com/openshift/grafana/pull/13341) * Fix misspell issues [#13383](https://github.com/openshift/grafana/pull/13383) * [1599806b](https://github.com/openshift/grafana/commit/1599806b) * added span with folder title that is shown for recently and starred [#12128](https://github.com/openshift/grafana/pull/12128) * [87bee3d9](https://github.com/openshift/grafana/commit/87bee3d9) * Update Configuration.md [#12716](https://github.com/openshift/grafana/pull/12716) * Fix metric-segment options displaying after blur [#13388](https://github.com/openshift/grafana/pull/13388) * Fix #13356, where tooltips do not display individual values on stacked graphs [#13394](https://github.com/openshift/grafana/pull/13394) * Explore: label selector for logging [#12877](https://github.com/openshift/grafana/pull/12877) * devenv: adds script for creating many dashboards with alerts [#13398](https://github.com/openshift/grafana/pull/13398) * Fix spelling of your and you're [#13410](https://github.com/openshift/grafana/pull/13410) * 13312 legend table width [#13407](https://github.com/openshift/grafana/pull/13407) * Remove option r from ln command since its not working everywhere [#13413](https://github.com/openshift/grafana/pull/13413) * Concurrent render limits [#13401](https://github.com/openshift/grafana/pull/13401) * provisioning: changed update interval default 3 to 10 seconds [#13391](https://github.com/openshift/grafana/pull/13391) * Remove .dropdown-menu-open on body click fixes #13409 [#13417](https://github.com/openshift/grafana/pull/13417) * alerting: move all notification conditions to defaultShouldNotify [#13402](https://github.com/openshift/grafana/pull/13402) * filter NULL values in column value suggestion query [#13427](https://github.com/openshift/grafana/pull/13427) * imguploader: Add support for ECS credential provider for S3 [#13424](https://github.com/openshift/grafana/pull/13424) * Fix goconst issues [#13392](https://github.com/openshift/grafana/pull/13392) * Add goconst to CircleCI [#13432](https://github.com/openshift/grafana/pull/13432) * Prevent refresh on fixed time window [#12219](https://github.com/openshift/grafana/pull/12219) * resolve symlink on each run [#13360](https://github.com/openshift/grafana/pull/13360) * switch button for org users [#13380](https://github.com/openshift/grafana/pull/13380) * fixes to dark theme for Explore mode [#13445](https://github.com/openshift/grafana/pull/13445) * [f2307f92](https://github.com/openshift/grafana/commit/f2307f92) * Compile TS on precommit hook [#13448](https://github.com/openshift/grafana/pull/13448) * Plugin list to react [#13438](https://github.com/openshift/grafana/pull/13438) * Adding AWS Isolated Regions [#13458](https://github.com/openshift/grafana/pull/13458) * Grafana high availability (ha) test setup [#13439](https://github.com/openshift/grafana/pull/13439) * Limit number of time series in explore [#13408](https://github.com/openshift/grafana/pull/13408) * [3ba01953](https://github.com/openshift/grafana/commit/3ba01953) * [c2686781](https://github.com/openshift/grafana/commit/c2686781) * [dc1535cf](https://github.com/openshift/grafana/commit/dc1535cf) * [c67327d7](https://github.com/openshift/grafana/commit/c67327d7) * [785f35b1](https://github.com/openshift/grafana/commit/785f35b1) * [c282f391](https://github.com/openshift/grafana/commit/c282f391) * [b6a918ba](https://github.com/openshift/grafana/commit/b6a918ba) * [186dcc00](https://github.com/openshift/grafana/commit/186dcc00) * [2628ef7e](https://github.com/openshift/grafana/commit/2628ef7e) * [66c95991](https://github.com/openshift/grafana/commit/66c95991) * [284d0b7e](https://github.com/openshift/grafana/commit/284d0b7e) * [0507ff69](https://github.com/openshift/grafana/commit/0507ff69) * [26d9e924](https://github.com/openshift/grafana/commit/26d9e924) * [9748a948](https://github.com/openshift/grafana/commit/9748a948) * [9b90b835](https://github.com/openshift/grafana/commit/9b90b835) * [aedd5181](https://github.com/openshift/grafana/commit/aedd5181) * [cdcb14f3](https://github.com/openshift/grafana/commit/cdcb14f3) * Stackdriver Datasource - Fixes #6733 [#13289](https://github.com/openshift/grafana/pull/13289) * [3081e0f8](https://github.com/openshift/grafana/commit/3081e0f8) * 13411 react api key [#13444](https://github.com/openshift/grafana/pull/13444) * Explore: Store UI state in URL [#13463](https://github.com/openshift/grafana/pull/13463) * cli: fix reset-admin-password [#13422](https://github.com/openshift/grafana/pull/13422) * Update to ldap.md [#13480](https://github.com/openshift/grafana/pull/13480) * typo in sample.ini [#13481](https://github.com/openshift/grafana/pull/13481) * Fix megacheck issues [#13470](https://github.com/openshift/grafana/pull/13470) * [f37a60dc](https://github.com/openshift/grafana/commit/f37a60dc) * Explore: jump to explore from panels with mixed datasources [#13416](https://github.com/openshift/grafana/pull/13416) * [a0e1a1a1](https://github.com/openshift/grafana/commit/a0e1a1a1) * use alert state changes counter for alert notification dedupping. [#13477](https://github.com/openshift/grafana/pull/13477) * Transaction issues for alert reminder [#13440](https://github.com/openshift/grafana/pull/13440) * Update configuration doc to include socket at [server] [#13499](https://github.com/openshift/grafana/pull/13499) * Testdata tables [#13500](https://github.com/openshift/grafana/pull/13500) * [09b68132](https://github.com/openshift/grafana/commit/09b68132) * Org users to react [#13488](https://github.com/openshift/grafana/pull/13488) * Revert "Org users to react" [#13502](https://github.com/openshift/grafana/pull/13502) * build: automatically publish releases to grafana.com. [#13508](https://github.com/openshift/grafana/pull/13508) * Fix issue with updating role permissions #13507 [#13509](https://github.com/openshift/grafana/pull/13509) * [81c44eb3](https://github.com/openshift/grafana/commit/81c44eb3) * stackdriver: adds missing nginject attribute [#13511](https://github.com/openshift/grafana/pull/13511) * centered dashboard icon in search with flexbox [#13514](https://github.com/openshift/grafana/pull/13514) * Fix megacheck issues [#13506](https://github.com/openshift/grafana/pull/13506) * * grafana/master: [5425b76e](https://github.com/openshift/grafana/commit/5425b76e) * * grafana/master: (29 commits) [14d816af](https://github.com/openshift/grafana/commit/14d816af) * * grafana/master: (51 commits) [56927e55](https://github.com/openshift/grafana/commit/56927e55) * * grafana/master: (104 commits) [27e96179](https://github.com/openshift/grafana/commit/27e96179) * * grafana/master: (187 commits) [8c86a1c4](https://github.com/openshift/grafana/commit/8c86a1c4) * * grafana/master: (52 commits) [8cfad74a](https://github.com/openshift/grafana/commit/8cfad74a) * * grafana/master: [048fd87a](https://github.com/openshift/grafana/commit/048fd87a) * * grafana/master: (368 commits) [9f4d4a93](https://github.com/openshift/grafana/commit/9f4d4a93) * * grafana/master: (127 commits) [b4fad40c](https://github.com/openshift/grafana/commit/b4fad40c) * Keep trailing slash for datasource proxy requests [#13326](https://github.com/openshift/grafana/pull/13326) * move timeFrom, timeTo, unixEpochFrom and unixEpochTo macros to sql_engine [#13498](https://github.com/openshift/grafana/pull/13498) * Explore: typeahead and render performance improvements [#13491](https://github.com/openshift/grafana/pull/13491) * Moving contributing.md to top level [#13525](https://github.com/openshift/grafana/pull/13525) * Explore: fix rate hint for series with null values [#13528](https://github.com/openshift/grafana/pull/13528) * Explore: reset typeahead on cursor move [#13530](https://github.com/openshift/grafana/pull/13530) * ux: misc react migration fixes and info box style improvement [#13534](https://github.com/openshift/grafana/pull/13534) * Explore: resize graph on window resize [#13529](https://github.com/openshift/grafana/pull/13529) * Fixed typo in query editor placeholder text. [#13543](https://github.com/openshift/grafana/pull/13543) * fix gofmt tests output [#13538](https://github.com/openshift/grafana/pull/13538) * Fix text overflow on playlist search #13464 [#13548](https://github.com/openshift/grafana/pull/13548) * docs: fix minor typos [#13547](https://github.com/openshift/grafana/pull/13547) * [e1c77f63](https://github.com/openshift/grafana/commit/e1c77f63) * New data source as separate page [#13537](https://github.com/openshift/grafana/pull/13537) * fix for influxdb annotation issue that caused text to be shown twice [#13556](https://github.com/openshift/grafana/pull/13556) * stackdriver metric name fix. Fixes #13562 [#13564](https://github.com/openshift/grafana/pull/13564) * Stackdriver filter wildcards [#13496](https://github.com/openshift/grafana/pull/13496) * Explore: do not show default suggestions after expressions [#13542](https://github.com/openshift/grafana/pull/13542) * Explore: trigger a query field render to fix highlighting [#13541](https://github.com/openshift/grafana/pull/13541) * Explore: compact state URLs [#13540](https://github.com/openshift/grafana/pull/13540) * ux: minor update to look of stackdriver query help [#13550](https://github.com/openshift/grafana/pull/13550) * Remove duplicate labels in the datasource query [#13570](https://github.com/openshift/grafana/pull/13570) * Improve Stackdriver provisioning docs [#13574](https://github.com/openshift/grafana/pull/13574) * Stackdriver heatmap support. Fixes #13559 [#13490](https://github.com/openshift/grafana/pull/13490) * Update debian.md [#13584](https://github.com/openshift/grafana/pull/13584) * fix CloudWatch id validation [#13583](https://github.com/openshift/grafana/pull/13583) * Render Dashboard Row drag handle only in edit mode [#13568](https://github.com/openshift/grafana/pull/13568) * cloudwatch: automatically set graph yaxis unit [#13571](https://github.com/openshift/grafana/pull/13571) * Update rpm.md [#13585](https://github.com/openshift/grafana/pull/13585) * Update windows.md [#13586](https://github.com/openshift/grafana/pull/13586) * Update mac.md [#13587](https://github.com/openshift/grafana/pull/13587) * [30fca2b1](https://github.com/openshift/grafana/commit/30fca2b1) * wip: whats new for 5.3 [#13403](https://github.com/openshift/grafana/pull/13403) * Explore: highlight typed text in suggestions [#13536](https://github.com/openshift/grafana/pull/13536) * [3932e4db](https://github.com/openshift/grafana/commit/3932e4db) * Run queries for sql data sources for panels with multiple queries concurrently [#13400](https://github.com/openshift/grafana/pull/13400) * elasticsearch: fix no limit size in terms aggregation for alerting queries [#13609](https://github.com/openshift/grafana/pull/13609) * Adding loading spinner to org pages [#13619](https://github.com/openshift/grafana/pull/13619) * fix phantomjs render of graph panel when legend displayed as table to the right [#13617](https://github.com/openshift/grafana/pull/13617) * [5b46c088](https://github.com/openshift/grafana/commit/5b46c088) * Frontend extensions [#13620](https://github.com/openshift/grafana/pull/13620) * stackdriver docs: metric query editor and annotations [#13618](https://github.com/openshift/grafana/pull/13618) * 13340 complete oauth doc [#13632](https://github.com/openshift/grafana/pull/13632) * [127b7d92](https://github.com/openshift/grafana/commit/127b7d92) * [69e0311c](https://github.com/openshift/grafana/commit/69e0311c) * Remove user form org in single org setup improvement [#13611](https://github.com/openshift/grafana/pull/13611) * [caf995bb](https://github.com/openshift/grafana/commit/caf995bb) * minor setting refactorings [#13638](https://github.com/openshift/grafana/pull/13638) * Stackdriver: Prevent filter from crashing [#13624](https://github.com/openshift/grafana/pull/13624) * Adds backend hooks service so extensions can modify index data [#13644](https://github.com/openshift/grafana/pull/13644) * updated jest to 23.10 [#13649](https://github.com/openshift/grafana/pull/13649) * Typos in plugin development documentation [#13657](https://github.com/openshift/grafana/pull/13657) * fix: label values regex for single letter labels [#13656](https://github.com/openshift/grafana/pull/1365…

openshift-ci-robot added the size/M Denotes a PR that changes 30-99 lines, ignoring generated files. label Sep 24, 2018

openshift-ci-robot requested review from smarterclayton and yifan-gu September 24, 2018 18:23

openshift-ci-robot added the needs-ok-to-test Indicates a PR that requires an org member to verify it is safe to test. label Sep 24, 2018

wking reviewed Sep 24, 2018

View reviewed changes

russellb force-pushed the libvirt-docs branch from 80c534b to d8e8665 Compare September 24, 2018 19:48

openshift-ci-robot added size/L Denotes a PR that changes 100-499 lines, ignoring generated files. and removed size/M Denotes a PR that changes 30-99 lines, ignoring generated files. labels Sep 24, 2018

wking reviewed Sep 24, 2018

View reviewed changes

russellb force-pushed the libvirt-docs branch from d8e8665 to 22bccc8 Compare September 24, 2018 20:51

openshift-ci-robot removed the needs-ok-to-test Indicates a PR that requires an org member to verify it is safe to test. label Sep 27, 2018

russellb force-pushed the libvirt-docs branch from 22bccc8 to f78bafb Compare September 27, 2018 13:12

openshift-ci-robot added size/M Denotes a PR that changes 30-99 lines, ignoring generated files. and removed size/L Denotes a PR that changes 100-499 lines, ignoring generated files. labels Sep 27, 2018

wking reviewed Sep 27, 2018

View reviewed changes

russellb force-pushed the libvirt-docs branch from f78bafb to 4278ba3 Compare September 27, 2018 16:53

openshift-ci-robot assigned wking Sep 27, 2018

openshift-ci-robot added the lgtm Indicates that a PR is ready to be merged. label Sep 27, 2018

openshift-ci-robot added the approved Indicates a PR has been approved by an approver from all required OWNERS files. label Sep 27, 2018

openshift-merge-robot merged commit d628b1c into openshift:master Sep 27, 2018

wking mentioned this pull request Nov 14, 2018

docs/dev/dependencies: Nest "Go" under "Build Dependencies" #676

Merged

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

docs/libvirt: Add dependency installation. #315

docs/libvirt: Add dependency installation. #315

russellb commented Sep 24, 2018

russellb commented Sep 24, 2018

wking Sep 24, 2018

russellb Sep 24, 2018

wking Sep 24, 2018

russellb Sep 24, 2018

wking Sep 24, 2018

russellb Sep 24, 2018

russellb Sep 24, 2018

wking Sep 24, 2018

russellb Sep 24, 2018

wking Sep 24, 2018

russellb Sep 24, 2018

wking Sep 24, 2018

russellb Sep 24, 2018

eparis commented Sep 27, 2018

wking commented Sep 27, 2018

wking Sep 27, 2018

russellb Sep 27, 2018

wking commented Sep 27, 2018

openshift-ci-robot commented Sep 27, 2018

openshift-bot commented Sep 27, 2018

docs/libvirt: Add dependency installation. #315

docs/libvirt: Add dependency installation. #315

Conversation

russellb commented Sep 24, 2018

russellb commented Sep 24, 2018

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

eparis commented Sep 27, 2018

wking commented Sep 27, 2018

Choose a reason for hiding this comment

Choose a reason for hiding this comment

wking commented Sep 27, 2018

openshift-ci-robot commented Sep 27, 2018

openshift-bot commented Sep 27, 2018