OCPBUGS-14832 - update PTP ref config

modules/nw-ptp-configuring-linuxptp-services-as-boundary-clock.adoc

@@ -28,136 +28,10 @@ See "Configuring the PTP fast event notifications publisher" for more informatio
 
 . Create the following `PtpConfig` CR, and then save the YAML in the `boundary-clock-ptp-config.yaml` file.
 +
-.Recommended PTP boundary clock configuration
+.Example PTP boundary clock configuration
 [source,yaml]
 ----
----
-apiVersion: ptp.openshift.io/v1
-kind: PtpConfig
-metadata:
-  name: boundary-clock-ptp-config
-  namespace: openshift-ptp
-spec:
-  profile:
-  - name: boundary-clock
-    phc2sysOpts: "-a -r -n 24"
-    ptp4lOpts: "-2"
-    ptpSchedulingPolicy: SCHED_FIFO
-    ptpSchedulingPriority: 10
-    ptp4lConf: |
-      [<interface_1>]
-      masterOnly 0
-      [<interface_2>]
-      masterOnly 1
-      [<interface_3>]
-      masterOnly 1
-      [<interface_4>]
-      masterOnly 1
-      [global]
-      #
-      # Default Data Set
-      #
-      twoStepFlag 1
-      slaveOnly 0
-      priority1 128
-      priority2 128
-      domainNumber 24
-      clockClass 248
-      clockAccuracy 0xFE
-      offsetScaledLogVariance 0xFFFF
-      free_running 0
-      freq_est_interval 1
-      dscp_event 0
-      dscp_general 0
-      dataset_comparison G.8275.x
-      G.8275.defaultDS.localPriority 128
-      #
-      # Port Data Set
-      #
-      logAnnounceInterval -3
-      logSyncInterval -4
-      logMinDelayReqInterval -4
-      logMinPdelayReqInterval -4
-      announceReceiptTimeout 3
-      syncReceiptTimeout 0
-      delayAsymmetry 0
-      fault_reset_interval 4
-      neighborPropDelayThresh 20000000
-      masterOnly 0
-      G.8275.portDS.localPriority 128
-      #
-      # Run time options
-      #
-      assume_two_step 0
-      logging_level 6
-      path_trace_enabled 0
-      follow_up_info 0
-      hybrid_e2e 0
-      inhibit_multicast_service 0
-      net_sync_monitor 0
-      tc_spanning_tree 0
-      tx_timestamp_timeout 50
-      unicast_listen 0
-      unicast_master_table 0
-      unicast_req_duration 3600
-      use_syslog 1
-      verbose 0
-      summary_interval 0
-      kernel_leap 1
-      check_fup_sync 0
-      #
-      # Servo Options
-      #
-      pi_proportional_const 0.0
-      pi_integral_const 0.0
-      pi_proportional_scale 0.0
-      pi_proportional_exponent -0.3
-      pi_proportional_norm_max 0.7
-      pi_integral_scale 0.0
-      pi_integral_exponent 0.4
-      pi_integral_norm_max 0.3
-      step_threshold 2.0
-      first_step_threshold 0.00002
-      max_frequency 900000000
-      clock_servo pi
-      sanity_freq_limit 200000000
-      ntpshm_segment 0
-      #
-      # Transport options
-      #
-      transportSpecific 0x0
-      ptp_dst_mac 01:1B:19:00:00:00
-      p2p_dst_mac 01:80:C2:00:00:0E
-      udp_ttl 1
-      udp6_scope 0x0E
-      uds_address /var/run/ptp4l
-      #
-      # Default interface options
-      #
-      clock_type BC
-      network_transport L2
-      delay_mechanism E2E
-      time_stamping hardware
-      tsproc_mode filter
-      delay_filter moving_median
-      delay_filter_length 10
-      egressLatency 0
-      ingressLatency 0
-      boundary_clock_jbod 0
-      #
-      # Clock description
-      #
-      productDescription ;;
-      revisionData ;;
-      manufacturerIdentity 00:00:00
-      userDescription ;
-      timeSource 0xA0
-  recommend:
-  - profile: boundary-clock
-    priority: 4
-    match:
-    - nodeLabel: node-role.kubernetes.io/master
-      nodeName: <nodename>
+include::snippets/ptp_PtpConfigBoundary.yaml[]
 ----
 +
 .PTP boundary clock CR configuration options

modules/nw-ptp-configuring-linuxptp-services-as-grandmaster-clock.adoc

@@ -34,7 +34,11 @@ See "Configuring the PTP fast event notifications publisher" for more informatio
 
 .. Save the following YAML in the `grandmaster-clock-ptp-config.yaml` file:
 +
-include::snippets/grandmaster-clock-ptp-config.adoc[]
+.Example PTP grandmaster clock configuration
+[source,yaml]
+----
+include::snippets/ptp_PtpConfigMaster.yaml[]
+----
 
 .. Create the CR by running the following command:
 +

modules/nw-ptp-configuring-linuxptp-services-as-ordinary-clock.adoc

@@ -27,128 +27,10 @@ See "Configuring the PTP fast event notifications publisher" for more informatio
 . Create the following `PtpConfig` CR, and then save the YAML in the `ordinary-clock-ptp-config.yaml` file.
 +
 [[ptp-ordinary-clock]]
-.Recommended PTP ordinary clock configuration
+.Example PTP ordinary clock configuration
 [source,yaml]
 ----
-apiVersion: ptp.openshift.io/v1
-kind: PtpConfig
-metadata:
-  name: ordinary-clock-ptp-config
-  namespace: openshift-ptp
-  spec:
-    profile:
-      - name: ordinary-clock
-        interface: "<interface_name>"
-        phc2sysOpts: "-a -r -n 24"
-        ptp4lOpts: "-2 -s"
-        ptpSchedulingPolicy: SCHED_FIFO
-        ptpSchedulingPriority: 10
-        ptp4lConf: |
-          [global]
-          #
-          # Default Data Set
-          #
-          twoStepFlag 1
-          slaveOnly 1
-          priority1 128
-          priority2 128
-          domainNumber 24
-          clockClass 255
-          clockAccuracy 0xFE
-          offsetScaledLogVariance 0xFFFF
-          free_running 0
-          freq_est_interval 1
-          dscp_event 0
-          dscp_general 0
-          dataset_comparison G.8275.x
-          G.8275.defaultDS.localPriority 128
-          #
-          # Port Data Set
-          #
-          logAnnounceInterval -3
-          logSyncInterval -4
-          logMinDelayReqInterval -4
-          logMinPdelayReqInterval -4
-          announceReceiptTimeout 3
-          syncReceiptTimeout 0
-          delayAsymmetry 0
-          fault_reset_interval 4
-          neighborPropDelayThresh 20000000
-          masterOnly 0
-          G.8275.portDS.localPriority 128
-          #
-          # Run time options
-          #
-          assume_two_step 0
-          logging_level 6
-          path_trace_enabled 0
-          follow_up_info 0
-          hybrid_e2e 0
-          inhibit_multicast_service 0
-          net_sync_monitor 0
-          tc_spanning_tree 0
-          tx_timestamp_timeout 50
-          unicast_listen 0
-          unicast_master_table 0
-          unicast_req_duration 3600
-          use_syslog 1
-          verbose 0
-          summary_interval 0
-          kernel_leap 1
-          check_fup_sync 0
-          #
-          # Servo Options
-          #
-          pi_proportional_const 0.0
-          pi_integral_const 0.0
-          pi_proportional_scale 0.0
-          pi_proportional_exponent -0.3
-          pi_proportional_norm_max 0.7
-          pi_integral_scale 0.0
-          pi_integral_exponent 0.4
-          pi_integral_norm_max 0.3
-          step_threshold 2.0
-          first_step_threshold 0.00002
-          max_frequency 900000000
-          clock_servo pi
-          sanity_freq_limit 200000000
-          ntpshm_segment 0
-          #
-          # Transport options
-          #
-          transportSpecific 0x0
-          ptp_dst_mac 01:1B:19:00:00:00
-          p2p_dst_mac 01:80:C2:00:00:0E
-          udp_ttl 1
-          udp6_scope 0x0E
-          uds_address /var/run/ptp4l
-          #
-          # Default interface options
-          #
-          clock_type OC
-          network_transport L2
-          delay_mechanism E2E
-          time_stamping hardware
-          tsproc_mode filter
-          delay_filter moving_median
-          delay_filter_length 10
-          egressLatency 0
-          ingressLatency 0
-          boundary_clock_jbod 0
-          #
-          # Clock description
-          #
-          productDescription ;;
-          revisionData ;;
-          manufacturerIdentity 00:00:00
-          userDescription ;
-          timeSource 0xA0
-      recommend:
-      - profile: ordinary-clock
-        priority: 4
-        match:
-        - nodeLabel: "node-role.kubernetes.io/worker"
-          nodeName: "<node_name>"
+include::snippets/ptp_PtpConfigOrdinaryClock.yaml[]
 ----
 +
 .PTP ordinary clock CR configuration options