GitHub Community
-
|
I have everything installed correctly, and it is activated, but it does not show any suggestion even though I insist on it, the VS code is just installed and it only has GitHub Copilot as the only extension |
Beta Was this translation helpful? Give feedback.
Replies: 36 comments 57 replies
-
|
What do you see in View -> Output; choose GitHub Copilot from the pull down. |
Beta Was this translation helpful? Give feedback.
-
Same here. 😭 I was very excited to get my hands on copilot. But now this happens out of the box. 😢 |
Beta Was this translation helpful? Give feedback.
-
[ERROR] [default] [2021-10-29T14:10:02.439Z] Request Error: read ECONNRESET |
Beta Was this translation helpful? Give feedback.
-
|
On the bottom right I didn't see a Copilot icon, but a notification. When I clicked on it, I could agree to the terms of the Copilot. Afterwards it worked! |
Beta Was this translation helpful? Give feedback.
-
Same is happening with me .. I think it is due to proxy ( works fine on my personal laptop ) |
Beta Was this translation helpful? Give feedback.
-
|
i can see the icon but its not working |
Beta Was this translation helpful? Give feedback.
-
|
Maybe you can check whether you have received the copilot's invitation first. If so, just enter vscode and reload the copilot. |
Beta Was this translation helpful? Give feedback.
-
|
lo que me paso es que el primer y segundo dia me funciono, pero despues el tercero no [INFO] [default] [2021-11-16T22:53:57.871Z] [fetchCompletions] engine https://copilot-proxy.githubusercontent.com/v1/engines/copilot-codex [INFO] [ghostText] [2021-11-16T22:54:32.051Z] Breaking, no choices [INFO] [ghostText] [2021-11-16T22:55:04.694Z] Breaking, no choices [INFO] [ghostText] [2021-11-16T22:55:19.975Z] Breaking, no choices [INFO] [ghostText] [2021-11-16T22:56:15.379Z] Breaking, no choices [INFO] [ghostText] [2021-11-16T22:57:04.740Z] Breaking, no choices [INFO] [ghostText] [2021-11-16T23:08:27.887Z] Breaking, no choices |
Beta Was this translation helpful? Give feedback.
-
|
I received the invitation to use copilot, but it does not connect. check this: What do you see in View -> Output? choose GitHub Copilot from the drop-down menu. it is empty. Please can you help me connect it. |
Beta Was this translation helpful? Give feedback.
-
|
I have a similar issue. No output from github copilot. No icon on status bar. Uninstalled and reinstalled the extension. CTRL + ENTER gives |
Beta Was this translation helpful? Give feedback.
-
|
I had a similar issue, had Copilot extension installed and configured, but no Copilot icon on status bar. Tried uninstall and reinstall a few time, didn't solve the issue. |
Beta Was this translation helpful? Give feedback.
-
|
Search for his name in the dropdown box and it comes up, but users in mainland China are not prompted to type in the code |
Beta Was this translation helpful? Give feedback.
-
|
Do you have a notification icon on the bottom right on which you can click and are prompted to accept the terms? I had to do this, then it worked. |
Beta Was this translation helpful? Give feedback.
-
|
My problem has been solved, VScode can be used normally, when a connection is invited to use in VScode search after install Copilot, the bottom right hand corner ICONS need to click the activated state, and then disconnect the broadband and wireless networks or use a mobile phone hot or broken network test, directly enter a comment, after will have code hinting, Press the Tab key to accept, press Enter to the next line, and so on, until there is no end of code generation. Can use other logic of want to annotate, VScode test only support JavaScript language at present. Other language test is invalid. Then Pycharm support Java language, the test has no effect. Hope to have the solution to this problem bosses to make technical guidance. Because the language used for Python, my hope about Python testing successful bosses do the technical support. |
Beta Was this translation helpful? Give feedback.
-
|
Some have hinted it may be a proxy issue. We use a proxy that intercepts ssl. Is there a config option to tell copilot to ignore cert validation errors, point it to a ca certs file, or tell it to use the Window's trust store? |
Beta Was this translation helpful? Give feedback.
-
|
@davecheney 's URLs did the trick for Zscaler. Adding both to SSL bypass made the copilot icon show up and generate suggestions. Not fully comfortable deploying those exceptions to all users so hopefully copilot supports ssl inspection soon. |
Beta Was this translation helpful? Give feedback.
-
|
@bigben386 Could you please provide us the steps which you followed? It will be very helpful for me and others. Our org also uses Zscaler |
Beta Was this translation helpful? Give feedback.
-
|
Add the URLs to a custom category and set up the ssl inspection policy to bypass the category http://help.zscaler.com/zia/skipping-inspection-traffic-specific-urls-or-cloud-apps |
Beta Was this translation helpful? Give feedback.
-
|
Would it be possible to add support for utilizing the MacOS System Keychain? |
Beta Was this translation helpful? Give feedback.
-
|
@davecheney zScaler use a custom certificate and could be added in NODE_EXTRA__CA_CERTS environment variable. I tried to do that and it didn't work. Since I'm using WSL 2 maybe I should setup something in vsserver that start the extension but I don't know if it's possible? |
Beta Was this translation helpful? Give feedback.
-
|
Added to no_proxy the suggested URLs and it didn't worked... I don't have access for disabling my company Firewall or changing it's configuration. |
Beta Was this translation helpful? Give feedback.
-
|
Please check over the following steps :
|
Beta Was this translation helpful? Give feedback.
-
|
Using proxychains solve the problem for me: $ proxychains code I need to comment the line "proxy_dns" in the proxychains.conf file |
Beta Was this translation helpful? Give feedback.
-
|
62/5000 I have received the invitation and installed it successfully. There is an icon in the lower right corner. The code for entering the document does not have a grey code prompt, but there is no prompt for users entering the code in mainland China |
Beta Was this translation helpful? Give feedback.
-
|
I'm running VSC on windows. I started VSC again, but "Ran as Administrator", it then did some kind of validation with github and now works. |
Beta Was this translation helpful? Give feedback.
-
|
Thanks everyone for your answers, it seems that my project did not generate a js that was needed to be able to work with copilot |
Beta Was this translation helpful? Give feedback.
-
|
@fcoking can you please explain a bit how you fixed your issue? i have the same problem, same GitHub account with activated Copilot works on all my other devices but my work/corporate installation of VSCode doesn't have copilot. i am successfully into my GitHub and have reinstalled the copilot plugin few times. when i do View-> Output i can choose 'Githib Copilot" from drop-down menu but there is no icon in the status bar and OUTPUT window remains empty. our corporate network has SOPHOS firewall and proxy. i don't know if there i something i do incorrectly or the proxy stopping copilot to work. |
Beta Was this translation helpful? Give feedback.
-
|
Same here. It sure would be nice if the extension had some logging to indicate where the issue is. Am I missing something? Should I be looking for a log of the problem? |
Beta Was this translation helpful? Give feedback.
-
|
same here, behind zscaler no info in the output console .. I am in windows, and I've removed the credentials and triggered the auth process again.. when github sends the token back to vscode, the extension authenticates but does and logs nothing else |
Beta Was this translation helpful? Give feedback.
-
|
just updated vscode to 1.62.2 and now i am seeing this warning message. bit sure exactly what it means
|
Beta Was this translation helpful? Give feedback.
-
|
It means something on your machine or your network is intercepting your HTTPS traffic. |
Beta Was this translation helpful? Give feedback.
-
|
The Githib Copilot in VSCode can be directly installed by clicking the search box in the four block diagrams on the left. Then you can see the Githib Copilot image in the lower right corner. However, there is no prompt to input the code according to the document, so we don't know where the problem is.
…------------------ 原始邮件 ------------------
发件人: "github/feedback" ***@***.***>;
发送时间: 2021年11月3日(星期三) 凌晨3:03
***@***.***>;
***@***.******@***.***>;
主题: Re: [github/feedback] I have VS code and GitHub copilot installed but it doesn't work (Discussion #6785)
@fcoking can you please explain a bit how you fixed your issue? i have the same problem, same GitHub account with activated Copilot works on all my other devices but my work/corporate installation of VSCode doesn't have copilot. i am successfully into my GitHub and have reinstalled the copilot plugin few times. when i do View-> Output i can choose 'Githib Copilot" from drop-down menu but there is no icon in bottom taskbar. and OUTPUT window remains empty. our corporate network has SOPHOS firewall and proxy. i don't know if there i something i do incorrectly or the proxy stopping copilot to work.
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub, or unsubscribe.
Triage notifications on the go with GitHub Mobile for iOS or Android.
|
Beta Was this translation helpful? Give feedback.
-
|
I found that the problem may be caused by the internet environment. After I connected my computer to my phone's hot spot, it worked successfully. Maybe you guys can try it out by checking out your devices' internet condition. |
Beta Was this translation helpful? Give feedback.
-
|
@TheEyeOfSoftwareEngineer you are correct, i disconnected my workstation from our corporate wired network and used USB hot spotting from my phone and Copilot icon showed up in status bar and and started working immediately. i took screenshot of the terminal OUTPUT when Copilot dropdown is seleted:
would have been nice to know what's stopping VSCode to talk to Copilot servers, or any particular URL is getting blocked, then we could take that to the IT and ask them nicely to whitelist! |
Beta Was this translation helpful? Give feedback.
-
|
Seems same network problem. Only I connected iPhone hot spot can work. (From China) |
Beta Was this translation helpful? Give feedback.
-
|
I had 2 accounts signed in VS Code, signed out the non-github account (in my case it was outlook account). Signed in from Github account this time it is working. In my case I received preview on my outlook account still i had to remove it and use my github account that was created using the outtlook account. |
Beta Was this translation helpful? Give feedback.
-
|
你是哪个国家的用户呢？我在中国。
发自我的iPhone
…------------------ Original ------------------
From: Joe ***@***.***>
Date: Thu,Nov 4,2021 0:04 PM
To: github/feedback ***@***.***>
Cc: Aliensjs ***@***.***>, Comment ***@***.***>
Subject: Re: [github/feedback] I have VS code and GitHub copilot installed but it doesn't work (Discussion #6785)
I faced the same issue, i had 2 accounts signed in VS Code, removed the non-github account (in my case it was outlook account). Signed in again from Github account now its working.
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub, or unsubscribe.
Triage notifications on the go with GitHub Mobile for iOS or Android.
|
Beta Was this translation helpful? Give feedback.
-
|
On the bottom right I didn't see a Copilot icon, but a notification. When I clicked on it, I could agree to the terms of the Copilot. Afterwards it worked! |
Beta Was this translation helpful? Give feedback.
-
|
Never seen a notification tho. |
Beta Was this translation helpful? Give feedback.
-
|
I had this issue, and it seemed like installation had failed. I tried a few things, but eventually this worked:
After that, many more files were in place, and it worked fine. Before, just uninstalling hadn't helped. |
Beta Was this translation helpful? Give feedback.
-
|
Thank you so much. This worked for me. |
Beta Was this translation helpful? Give feedback.
-
|
My problem has been solved, VScode can be used normally, when a connection is invited to use in VScode search after install Copilot, the bottom right hand corner ICONS need to click the activated state, and then disconnect the broadband and wireless networks or use a mobile phone hot or broken network test, directly enter a comment, after will have code hinting, Press the Tab key to accept, press Enter to the next line, and so on, until there is no end of code generation. Can use other logic of want to annotate, VScode test only support JavaScript language at present. Other language test is invalid. Then Pycharm support Java language, the test has no effect. Hope to have the solution to this problem bosses to make technical guidance. Because the language used for Python, my hope about Python testing successful bosses do the technical support.
…------------------ 原始邮件 ------------------
发件人: "github/feedback" ***@***.***>;
发送时间: 2021年11月5日(星期五) 晚上6:36
***@***.***>;
***@***.******@***.***>;
主题: Re: [github/feedback] I have VS code and GitHub copilot installed but it doesn't work (Discussion #6785)
Do you have a notification icon on the bottom right on which you can click and are prompted to accept the terms? I had to do this, then it worked.
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub, or unsubscribe.
Triage notifications on the go with GitHub Mobile for iOS or Android.
|
Beta Was this translation helpful? Give feedback.
-
|
My problem has been solved, VScode can be used normally, when a connection is invited to use in VScode search after install Copilot, the bottom right hand corner ICONS need to click the activated state, and then disconnect the broadband and wireless networks or use a mobile phone hot or broken network test, directly enter a comment, after will have code hinting, Press the Tab key to accept, press Enter to the next line, and so on, until there is no end of code generation. Can use other logic of want to annotate, VScode test only support JavaScript language at present. Other language test is invalid. Then Pycharm support Java language, the test has no effect. Hope to have the solution to this problem bosses to make technical guidance. Because the language used for Python, my hope about Python testing successful bosses do the technical support.
…------------------ 原始邮件 ------------------
发件人: "github/feedback" ***@***.***>;
发送时间: 2021年11月5日(星期五) 晚上6:37
***@***.***>;
***@***.******@***.***>;
主题: Re: [github/feedback] I have VS code and GitHub copilot installed but it doesn't work (Discussion #6785)
On the bottom right I didn't saw a Copilot icon, but a notification. When I clicked on it, I could agree to the terms of the Copilot. Afterwards it worked!
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub, or unsubscribe.
Triage notifications on the go with GitHub Mobile for iOS or Android.
|
Beta Was this translation helpful? Give feedback.
-
|
My problem has been solved, VScode can be used normally, when a connection is invited to use in VScode search after install Copilot, the bottom right hand corner ICONS need to click the activated state, and then disconnect the broadband and wireless networks or use a mobile phone hot or broken network test, directly enter a comment, after will have code hinting, Press the Tab key to accept, press Enter to the next line, and so on, until there is no end of code generation. Can use other logic of want to annotate, VScode test only support JavaScript language at present. Other language test is invalid. Then Pycharm support Java language, the test has no effect. Hope to have the solution to this problem bosses to make technical guidance. Because the language used for Python, my hope about Python testing successful bosses do the technical support.
…------------------ 原始邮件 ------------------
发件人: "github/feedback" ***@***.***>;
发送时间: 2021年11月5日(星期五) 晚上7:13
***@***.***>;
***@***.******@***.***>;
主题: Re: [github/feedback] I have VS code and GitHub copilot installed but it doesn't work (Discussion #6785)
I had this issue, and it seemed like installation had failed. I tried a few things, but eventually this worked:
Close VSCode (optional, but if you don't it will get a bit confused and maybe slow)
Go to VSCode data dir (On linux this was ~/.vscode, on windows I would guess it's in AppData) and then the extensions sub dir.
Delete the copilot directory
Restart VSCode
Confirm internet access (this seems to be what caused the issue, some kind of drop whilst it was downloading)
Install Copilot again, and login as usual.
After that, many more files were in place, and it worked fine. Before, just uninstalling hadn't helped.
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub, or unsubscribe.
Triage notifications on the go with GitHub Mobile for iOS or Android.
|
Beta Was this translation helpful? Give feedback.
-
|
confirmed here, disconnecting from corporate vpn (which also disables the proxy), a notification about telemetry appears on the bottom, accepting it enables the extension and works.. unfortunately, turning the vpn back blocks the extension and icons stops to appear after reload. |
Beta Was this translation helpful? Give feedback.
-
|
if no network problem, check my answer to any MacOS user #7178 (comment) . |
Beta Was this translation helpful? Give feedback.
-
|
I solved same problem by restarting vs with administrator privilege |
Beta Was this translation helpful? Give feedback.
-
|
GitHub Copilot could not connect to server. Extension activation failed: "unable to verify the first certificate" Because of chinese firewall? |
Beta Was this translation helpful? Give feedback.
-
|
My one is also not working. It is showing GitHub Copilot could not connect to server. Extension activation failed: "User not authorized" |
Beta Was this translation helpful? Give feedback.
-
|
I got the same thing. Not sure if I did get the email that I got in, I think i remember seeing it awhile ago. |
Beta Was this translation helpful? Give feedback.
-
|
I had a failed due to proxy error, which for me, on a corporate network, was rectified by disabling the proxy for extensions within VS Code settings
|
Beta Was this translation helpful? Give feedback.
-
|
@techspud thanks for the suggestion. i tried that but did not work for me basically each time it tries to fetch something from |
Beta Was this translation helpful? Give feedback.
-
|
That's a shame - guess I got lucky with droppng the proxy in Code. Your issue sounds like one for the either the VS Code / Copilot team! |
Beta Was this translation helpful? Give feedback.
-
|
i just checked with our company IT and the URL was not even blacklisted with firewall/proxy. i wonder what else could be causing the error below:
|
Beta Was this translation helpful? Give feedback.
-
Looks like someone is MITM'ing your SSL traffic. |
Beta Was this translation helpful? Give feedback.
-
|
In our case, that is by design - corporate proxy is re-encrypting SSL traffic for visibility. |
Beta Was this translation helpful? Give feedback.
-
|
in my case look like this
how to fix this ?
|
Beta Was this translation helpful? Give feedback.
-
|
I have the same issue, any idea what to do? |
Beta Was this translation helpful? Give feedback.
-
|
I fixed mine. I had nothing in the output page but icon was there. I guess the policy was the problem |
Beta Was this translation helpful? Give feedback.
-
|
I have the following issue while using copilot. Any pointer to solve this would be appricated.
|
Beta Was this translation helpful? Give feedback.
-
|
Hello, I'm sorry you are having difficulties. Are you behind a firewall, vpn, or other technology that may be intercepting your network connections? |
Beta Was this translation helpful? Give feedback.
-
|
No, I am not. I am working from home with regular broadband. No Firewall or VPN as such. |
Beta Was this translation helpful? Give feedback.
-
|
The error your reported suggests that this may not be the case. Something may be intercepting your SSL connections. |
Beta Was this translation helpful? Give feedback.
-
|
Could it be possible that it is not enabled for India? I have a VM in US region and it is working over there. |
Beta Was this translation helpful? Give feedback.
-
|
From the server telemetry India is one of our larger markets. Copilot is definitely being used by Indian developers. |
Beta Was this translation helpful? Give feedback.
-
|
Hello, I have also some trouble using Copilot. After each VSCode restart/reload, I get the following error and Copilot is not working: I have to disconnect and reconnect my github account but still I don't see any Copilot suggestion. |
Beta Was this translation helpful? Give feedback.
-
|
Also experiencing behind Netskope which is intercepting SSL for inspection. Would love a secure way around this new issue...it was working for many months then all of a sudden I couldn't connect :( |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
@wethegreenpeople Yes, hoped that would work... it did not for me, maybe I'm not doing it properly. |
Beta Was this translation helpful? Give feedback.
-
|
This is my output and it's not working |
Beta Was this translation helpful? Give feedback.
and others
Thanks everyone for your answers, it seems that my project did not generate a js that was needed to be able to work with copilot