main_ap.c

/*
 * $Id$
 *
 * Copyright (C) 2003-2010  The Paparazzi Team
 *
 * This file is part of paparazzi.
 *
 * paparazzi is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2, or (at your option)
 * any later version.
 *
 * paparazzi is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with paparazzi; see the file COPYING.  If not, write to
 * the Free Software Foundation, 59 Temple Place - Suite 330,
 * Boston, MA 02111-1307, USA.
 *
 */

/**
 * @file main_ap.c
 * AP ( AutoPilot ) tasks
 *
 * This process is reponsible for the collecting the different sensors data, fusing them to obtain
 * aircraft attitude and running the different control loops
 */

#define MODULES_C

#include <math.h>

#include "firmwares/fixedwing/main_ap.h"
#include "mcu.h"
#include "mcu_periph/sys_time.h"

#include "link_mcu.h"

// Sensors
#if USE_GPS
#include "subsystems/gps.h"
#endif
#if USE_IMU
#include "subsystems/imu.h"
#endif
#if USE_AHRS
#include "subsystems/ahrs.h"
#endif
#if USE_AHRS_ALIGNER
#include "subsystems/ahrs/ahrs_aligner.h"
#endif
#if USE_BAROMETER
#include "subsystems/sensors/baro.h"
#endif
#include "subsystems/ins.h"


// autopilot & control
#include "state.h"
#include "firmwares/fixedwing/autopilot.h"
#include "firmwares/fixedwing/stabilization/stabilization_attitude.h"
#include CTRL_TYPE_H
#include "subsystems/nav.h"
#include "generated/flight_plan.h"
#ifdef TRAFFIC_INFO
#include "subsystems/navigation/traffic_info.h"
#endif

// datalink & telemetry
#include "subsystems/datalink/datalink.h"
#include "subsystems/settings.h"
#include "subsystems/datalink/xbee.h"
#include "firmwares/fixedwing/ap_downlink.h"

// modules & settings
#include "generated/modules.h"
#include "generated/settings.h"
#if defined RADIO_CONTROL || defined RADIO_CONTROL_AUTO1
#include "rc_settings.h"
#endif

#include "gpio.h"
#include "led.h"


#if USE_AHRS
#if USE_IMU
static inline void on_gyro_event( void );
static inline void on_accel_event( void );
static inline void on_mag_event( void );
volatile uint8_t ahrs_timeout_counter = 0;
#endif // USE_IMU
#endif // USE_AHRS

#if USE_GPS
static inline void on_gps_solution( void );
#endif

#if USE_BAROMETER
static inline void on_baro_abs_event( void );
static inline void on_baro_dif_event( void );
#endif

bool_t power_switch;

// what version is this ????
static const uint16_t version = 1;

uint8_t pprz_mode = PPRZ_MODE_AUTO2;
uint8_t lateral_mode = LATERAL_MODE_MANUAL;

static uint8_t  mcu1_status;

#if defined RADIO_CONTROL || defined RADIO_CONTROL_AUTO1
static uint8_t  mcu1_ppm_cpt;
#endif

bool_t kill_throttle = FALSE;

bool_t launch = FALSE;

/* flight time in seconds */
uint16_t autopilot_flight_time = 0;


/** Supply voltage in deciVolt.
 * This the ap copy of the measurement from fbw
 */
uint8_t vsupply;

/** Supply current in milliAmpere.
 * This the ap copy of the measurement from fbw
 */
static int32_t current;	// milliAmpere

/** Fuel consumption (mAh)
 * TODO: move to electrical subsystem
 */
float energy;

bool_t gps_lost = FALSE;


tid_t modules_tid;     ///< id for modules_periodic_task() timer
tid_t telemetry_tid;   ///< id for telemetry_periodic() timer
tid_t sensors_tid;     ///< id for sensors_task() timer
tid_t attitude_tid;    ///< id for attitude_loop() timer
tid_t navigation_tid;  ///< id for navigation_task() timer
tid_t monitor_tid;     ///< id for monitor_task() timer


void init_ap( void ) {
#ifndef SINGLE_MCU /** init done in main_fbw in single MCU */
  mcu_init();
#endif /* SINGLE_MCU */

  /************* Sensors initialization ***************/
#if USE_GPS
  gps_init();
#endif

#ifdef USE_GPIO
  GpioInit();
#endif

#if USE_IMU
  imu_init();
#endif

#if USE_AHRS_ALIGNER
  ahrs_aligner_init();
#endif

#if USE_AHRS
  ahrs_init();
#endif

#if USE_BAROMETER
  baro_init();
#endif

  ins_init();

  stateInit();

  /************* Links initialization ***************/
#if defined MCU_SPI_LINK
  link_mcu_init();
#endif
#if USE_AUDIO_TELEMETRY
  audio_telemetry_init();
#endif

  /************ Internal status ***************/
  h_ctl_init();
  v_ctl_init();
  nav_init();

  modules_init();

  settings_init();

  /**** start timers for periodic functions *****/
  sensors_tid = sys_time_register_timer(1./PERIODIC_FREQUENCY, NULL);
  navigation_tid = sys_time_register_timer(1./NAVIGATION_FREQUENCY, NULL);
  attitude_tid = sys_time_register_timer(1./CONTROL_FREQUENCY, NULL);
  modules_tid = sys_time_register_timer(1./MODULES_FREQUENCY, NULL);
  telemetry_tid = sys_time_register_timer(1./60, NULL);
  monitor_tid = sys_time_register_timer(1.0, NULL);

  /** - start interrupt task */
  mcu_int_enable();

#if defined DATALINK
#if DATALINK == XBEE
  xbee_init();
#endif
#endif /* DATALINK */

#if defined AEROCOMM_DATA_PIN
  IO0DIR |= _BV(AEROCOMM_DATA_PIN);
  IO0SET = _BV(AEROCOMM_DATA_PIN);
#endif

  power_switch = FALSE;

  /************ Multi-uavs status ***************/

#ifdef TRAFFIC_INFO
  traffic_info_init();
#endif
}


void handle_periodic_tasks_ap(void) {

  if (sys_time_check_and_ack_timer(sensors_tid))
    sensors_task();

  if (sys_time_check_and_ack_timer(navigation_tid))
    navigation_task();

#ifndef AHRS_TRIGGERED_ATTITUDE_LOOP
  if (sys_time_check_and_ack_timer(attitude_tid))
    attitude_loop();
#endif

  if (sys_time_check_and_ack_timer(modules_tid))
    modules_periodic_task();

  if (sys_time_check_and_ack_timer(monitor_tid))
    monitor_task();

  if (sys_time_check_and_ack_timer(telemetry_tid)) {
    reporting_task();
    LED_PERIODIC();
  }

}


/******************** Interaction with FBW *****************************/

/** Update paparazzi mode.
 */
#if defined RADIO_CONTROL || defined RADIO_CONTROL_AUTO1
static inline uint8_t pprz_mode_update( void ) {
  if ((pprz_mode != PPRZ_MODE_HOME &&
       pprz_mode != PPRZ_MODE_GPS_OUT_OF_ORDER)
#ifdef UNLOCKED_HOME_MODE
      || TRUE
#endif
      ) {
#ifndef RADIO_AUTO_MODE
    return ModeUpdate(pprz_mode, PPRZ_MODE_OF_PULSE(fbw_state->channels[RADIO_MODE]));
#else
#pragma message "Using RADIO_AUTO_MODE to switch between AUTO1 and AUTO2."
    /* If RADIO_AUTO_MODE is enabled mode swithing will be seperated between two switches/channels
     * RADIO_MODE will switch between PPRZ_MODE_MANUAL and any PPRZ_MODE_AUTO mode selected by RADIO_AUTO_MODE.
     *
     * This is mainly a cludge for entry level radios with no three-way switch but two available two-way switches which can be used.
     */
    if(PPRZ_MODE_OF_PULSE(fbw_state->channels[RADIO_MODE]) == PPRZ_MODE_MANUAL) {
      /* RADIO_MODE in MANUAL position */
      return ModeUpdate(pprz_mode, PPRZ_MODE_MANUAL);
    } else {
      /* RADIO_MODE not in MANUAL position.
       * Select AUTO mode bassed on RADIO_AUTO_MODE channel
       */
      return ModeUpdate(pprz_mode, (fbw_state->channels[RADIO_AUTO_MODE] > THRESHOLD2) ? PPRZ_MODE_AUTO2 : PPRZ_MODE_AUTO1);
    }
#endif // RADIO_AUTO_MODE
  } else
    return FALSE;
}
#else // not RADIO_CONTROL
static inline uint8_t pprz_mode_update( void ) {
  return FALSE;
}
#endif

static inline uint8_t mcu1_status_update( void ) {
  uint8_t new_status = fbw_state->status;
  if (mcu1_status != new_status) {
    bool_t changed = ((mcu1_status&MASK_FBW_CHANGED) != (new_status&MASK_FBW_CHANGED));
    mcu1_status = new_status;
    return changed;
  }
  return FALSE;
}


/** Send back uncontrolled channels.
 */
static inline void copy_from_to_fbw ( void ) {
#ifdef SetAutoCommandsFromRC
  SetAutoCommandsFromRC(ap_state->commands, fbw_state->channels);
#elif defined RADIO_YAW && defined COMMAND_YAW
  ap_state->commands[COMMAND_YAW] = fbw_state->channels[RADIO_YAW];
#endif
}

/** mode to enter when RC is lost in PPRZ_MODE_MANUAL or PPRZ_MODE_AUTO1 */
#ifndef RC_LOST_MODE
#define RC_LOST_MODE PPRZ_MODE_HOME
#endif

/**
 * Function to be called when a message from FBW is available
 */
static inline void telecommand_task( void ) {
  uint8_t mode_changed = FALSE;
  copy_from_to_fbw();

  uint8_t really_lost = bit_is_set(fbw_state->status, STATUS_RADIO_REALLY_LOST) && (pprz_mode == PPRZ_MODE_AUTO1 || pprz_mode == PPRZ_MODE_MANUAL);
  if (pprz_mode != PPRZ_MODE_HOME && pprz_mode != PPRZ_MODE_GPS_OUT_OF_ORDER && launch) {
    if  (too_far_from_home) {
      pprz_mode = PPRZ_MODE_HOME;
      mode_changed = TRUE;
    }
    if  (really_lost) {
      pprz_mode = RC_LOST_MODE;
      mode_changed = TRUE;
    }
  }
  if (bit_is_set(fbw_state->status, AVERAGED_CHANNELS_SENT)) {
    bool_t pprz_mode_changed = pprz_mode_update();
    mode_changed |= pprz_mode_changed;
#if defined RADIO_CALIB && defined RADIO_CONTROL_SETTINGS
    bool_t calib_mode_changed = RcSettingsModeUpdate(fbw_state->channels);
    rc_settings(calib_mode_changed || pprz_mode_changed);
    mode_changed |= calib_mode_changed;
#endif
  }
  mode_changed |= mcu1_status_update();
  if ( mode_changed )
    PERIODIC_SEND_PPRZ_MODE(DefaultChannel, DefaultDevice);

#if defined RADIO_CONTROL || defined RADIO_CONTROL_AUTO1
  /** In AUTO1 mode, compute roll setpoint and pitch setpoint from
   * \a RADIO_ROLL and \a RADIO_PITCH \n
   */
  if (pprz_mode == PPRZ_MODE_AUTO1) {
    /** Roll is bounded between [-AUTO1_MAX_ROLL;AUTO1_MAX_ROLL] */
    h_ctl_roll_setpoint = FLOAT_OF_PPRZ(fbw_state->channels[RADIO_ROLL], 0., AUTO1_MAX_ROLL);

    /** Pitch is bounded between [-AUTO1_MAX_PITCH;AUTO1_MAX_PITCH] */
    h_ctl_pitch_setpoint = FLOAT_OF_PPRZ(fbw_state->channels[RADIO_PITCH], 0., AUTO1_MAX_PITCH);
  } /** Else asynchronously set by \a h_ctl_course_loop() */

  /** In AUTO1, throttle comes from RADIO_THROTTLE
      In MANUAL, the value is copied to get it in the telemetry */
  if (pprz_mode == PPRZ_MODE_MANUAL || pprz_mode == PPRZ_MODE_AUTO1) {
    v_ctl_throttle_setpoint = fbw_state->channels[RADIO_THROTTLE];
  }
  /** else asynchronously set by v_ctl_climb_loop(); */

  mcu1_ppm_cpt = fbw_state->ppm_cpt;
#endif // RADIO_CONTROL


  vsupply = fbw_state->vsupply;
  current = fbw_state->current;

#ifdef RADIO_CONTROL
  if (!autopilot_flight_time) {
    if (pprz_mode == PPRZ_MODE_AUTO2 && fbw_state->channels[RADIO_THROTTLE] > THROTTLE_THRESHOLD_TAKEOFF) {
      launch = TRUE;
    }
  }
#endif
}


/**************************** Periodic tasks ***********************************/

/**
 * Send a series of initialisation messages followed by a stream of periodic ones.
 * Called at 60Hz.
 */
void reporting_task( void ) {
  static uint8_t boot = TRUE;

  /** initialisation phase during boot */
  if (boot) {
    DOWNLINK_SEND_BOOT(DefaultChannel, DefaultDevice, &version);
    boot = FALSE;
  }
  /** then report periodicly */
  else {
    PeriodicSendAp(DefaultChannel, DefaultDevice);
  }
}


#ifdef FAILSAFE_DELAY_WITHOUT_GPS
#define GpsTimeoutError (sys_time.nb_sec - gps.last_fix_time > FAILSAFE_DELAY_WITHOUT_GPS)
#endif

/**
 *  Compute desired_course
 */
void navigation_task( void ) {
#if defined FAILSAFE_DELAY_WITHOUT_GPS
  /** This section is used for the failsafe of GPS */
  static uint8_t last_pprz_mode;

  /** If aircraft is launched and is in autonomus mode, go into
      PPRZ_MODE_GPS_OUT_OF_ORDER mode (Failsafe) if we lost the GPS */
  if (launch) {
    if (GpsTimeoutError) {
      if (pprz_mode == PPRZ_MODE_AUTO2 || pprz_mode == PPRZ_MODE_HOME) {
        last_pprz_mode = pprz_mode;
        pprz_mode = PPRZ_MODE_GPS_OUT_OF_ORDER;
        PERIODIC_SEND_PPRZ_MODE(DefaultChannel, DefaultDevice);
        gps_lost = TRUE;
      }
    } else if (gps_lost) { /* GPS is ok */
      /** If aircraft was in failsafe mode, come back in previous mode */
      pprz_mode = last_pprz_mode;
      gps_lost = FALSE;

      PERIODIC_SEND_PPRZ_MODE(DefaultChannel, DefaultDevice);
    }
  }
#endif /* GPS && FAILSAFE_DELAY_WITHOUT_GPS */

  common_nav_periodic_task_4Hz();
  if (pprz_mode == PPRZ_MODE_HOME)
    nav_home();
  else if (pprz_mode == PPRZ_MODE_GPS_OUT_OF_ORDER)
    nav_without_gps();
  else
    nav_periodic_task();

#ifdef TCAS
  CallTCAS();
#endif

#ifndef PERIOD_NAVIGATION_0 // If not sent periodically (in default 0 mode)
  SEND_NAVIGATION(DefaultChannel, DefaultDevice);
#endif

  SEND_CAM(DefaultChannel, DefaultDevice);

  /* The nav task computes only nav_altitude. However, we are interested
     by desired_altitude (= nav_alt+alt_shift) in any case.
     So we always run the altitude control loop */
  if (v_ctl_mode == V_CTL_MODE_AUTO_ALT)
    v_ctl_altitude_loop();

  if (pprz_mode == PPRZ_MODE_AUTO2 || pprz_mode == PPRZ_MODE_HOME
            || pprz_mode == PPRZ_MODE_GPS_OUT_OF_ORDER) {
#ifdef H_CTL_RATE_LOOP
    /* Be sure to be in attitude mode, not roll */
    h_ctl_auto1_rate = FALSE;
#endif
    if (lateral_mode >=LATERAL_MODE_COURSE)
      h_ctl_course_loop(); /* aka compute nav_desired_roll */

    // climb_loop(); //4Hz
  }
  energy += ((float)current) / 3600.0f * 0.25f;	// mAh = mA * dt (4Hz -> hours)
}


#ifdef AHRS_TRIGGERED_ATTITUDE_LOOP
volatile uint8_t new_ins_attitude = 0;
#endif

void attitude_loop( void ) {

#if USE_INFRARED
  ahrs_update_infrared();
#endif /* USE_INFRARED */

  if (pprz_mode >= PPRZ_MODE_AUTO2)
  {
    if (v_ctl_mode == V_CTL_MODE_AUTO_THROTTLE) {
      v_ctl_throttle_setpoint = nav_throttle_setpoint;
      v_ctl_pitch_setpoint = nav_pitch;
    }
    else if (v_ctl_mode >= V_CTL_MODE_AUTO_CLIMB)
    {
      v_ctl_climb_loop();
    }

#if defined V_CTL_THROTTLE_IDLE
    Bound(v_ctl_throttle_setpoint, TRIM_PPRZ(V_CTL_THROTTLE_IDLE*MAX_PPRZ), MAX_PPRZ);
#endif

#ifdef V_CTL_POWER_CTL_BAT_NOMINAL
    if (vsupply > 0.) {
      v_ctl_throttle_setpoint *= 10. * V_CTL_POWER_CTL_BAT_NOMINAL / (float)vsupply;
      v_ctl_throttle_setpoint = TRIM_UPPRZ(v_ctl_throttle_setpoint);
    }
#endif

    h_ctl_pitch_setpoint = v_ctl_pitch_setpoint; // Copy the pitch setpoint from the guidance to the stabilization control
    Bound(h_ctl_pitch_setpoint, H_CTL_PITCH_MIN_SETPOINT, H_CTL_PITCH_MAX_SETPOINT);
    if (kill_throttle || (!autopilot_flight_time && !launch))
      v_ctl_throttle_setpoint = 0;
  }

  h_ctl_attitude_loop(); /* Set  h_ctl_aileron_setpoint & h_ctl_elevator_setpoint */
  v_ctl_throttle_slew();
  ap_state->commands[COMMAND_THROTTLE] = v_ctl_throttle_slewed;
  ap_state->commands[COMMAND_ROLL] = -h_ctl_aileron_setpoint;

  ap_state->commands[COMMAND_PITCH] = h_ctl_elevator_setpoint;

#if defined MCU_SPI_LINK
  link_mcu_send();
#elif defined INTER_MCU && defined SINGLE_MCU
  /**Directly set the flag indicating to FBW that shared buffer is available*/
  inter_mcu_received_ap = TRUE;
#endif

}


/** Run at PERIODIC_FREQUENCY (60Hz if not defined) */
void sensors_task( void ) {
#if USE_IMU
  imu_periodic();

#if USE_AHRS
  if (ahrs_timeout_counter < 255)
    ahrs_timeout_counter ++;
#endif // USE_AHRS
#endif // USE_IMU

  //FIXME: this is just a kludge
#if USE_AHRS && defined SITL
  ahrs_propagate();
#endif

#if USE_BAROMETER
  baro_periodic();
#endif

  ins_periodic();
}




/** Maximum time allowed for low battery level before going into kill mode */
#define LOW_BATTERY_DELAY 5

/** Maximum distance from HOME waypoint before going into kill mode */
#ifndef KILL_MODE_DISTANCE
#define KILL_MODE_DISTANCE (1.5*MAX_DIST_FROM_HOME)
#endif

/** Define minimal speed for takeoff in m/s */
#define MIN_SPEED_FOR_TAKEOFF 5.

/** monitor stuff run at 1Hz */
void monitor_task( void ) {
  if (autopilot_flight_time)
    autopilot_flight_time++;
#if defined DATALINK || defined SITL
  datalink_time++;
#endif

  static uint8_t t = 0;
  if (vsupply < CATASTROPHIC_BAT_LEVEL*10)
    t++;
  else
    t = 0;
  kill_throttle |= (t >= LOW_BATTERY_DELAY);
  kill_throttle |= launch && (dist2_to_home > Square(KILL_MODE_DISTANCE));

  if (!autopilot_flight_time &&
      *stateGetHorizontalSpeedNorm_f() > MIN_SPEED_FOR_TAKEOFF) {
    autopilot_flight_time = 1;
    launch = TRUE; /* Not set in non auto launch */
    uint16_t time_sec = sys_time.nb_sec;
    DOWNLINK_SEND_TAKEOFF(DefaultChannel, DefaultDevice, &time_sec);
  }

#ifdef USE_GPIO
   GpioUpdate1();
#endif
}


/*********** EVENT ***********************************************************/
void event_task_ap( void ) {

#ifndef SINGLE_MCU
#if defined USE_I2C0  || defined USE_I2C1  || defined USE_I2C2
  i2c_event();
#endif
#endif

#if USE_AHRS && USE_IMU
  ImuEvent(on_gyro_event, on_accel_event, on_mag_event);
#endif

#ifdef InsEvent
#pragma message "calling InsEvent, remove me.."
  InsEvent(NULL);
#endif

#if USE_GPS
  GpsEvent(on_gps_solution);
#endif /* USE_GPS */

#if USE_BAROMETER
  BaroEvent(on_baro_abs_event, on_baro_dif_event);
#endif

  DatalinkEvent();


#ifdef MCU_SPI_LINK
  link_mcu_event_task();
#endif

  if (inter_mcu_received_fbw) {
    /* receive radio control task from fbw */
    inter_mcu_received_fbw = FALSE;
    telecommand_task();
  }

  modules_event_task();

#ifdef AHRS_TRIGGERED_ATTITUDE_LOOP
  if (new_ins_attitude > 0)
  {
    attitude_loop();
    //LED_TOGGLE(3);
    new_ins_attitude = 0;
  }
#endif

} /* event_task_ap() */


#if USE_GPS
static inline void on_gps_solution( void ) {
  ins_update_gps();
#if USE_AHRS
  ahrs_update_gps();
#endif
#ifdef GPS_TRIGGERED_FUNCTION
  GPS_TRIGGERED_FUNCTION();
#endif
}
#endif


#if USE_AHRS
#if USE_IMU
static inline void on_accel_event( void ) {
}

static inline void on_gyro_event( void ) {

  ahrs_timeout_counter = 0;

#if USE_AHRS_ALIGNER
  // Run aligner on raw data as it also makes averages.
  if (ahrs.status == AHRS_UNINIT) {
    ImuScaleGyro(imu);
    ImuScaleAccel(imu);
    ahrs_aligner_run();
    if (ahrs_aligner.status == AHRS_ALIGNER_LOCKED)
      ahrs_align();
    return;
  }
#endif

#if PERIODIC_FREQUENCY == 60
  ImuScaleGyro(imu);
  ImuScaleAccel(imu);

  ahrs_propagate();
  ahrs_update_accel();

#ifdef AHRS_TRIGGERED_ATTITUDE_LOOP
  new_ins_attitude = 1;
#endif

#else //PERIODIC_FREQUENCY
  static uint8_t _reduced_propagation_rate = 0;
  static uint8_t _reduced_correction_rate = 0;
  static struct Int32Vect3 acc_avg;
  static struct Int32Rates gyr_avg;

  RATES_ADD(gyr_avg, imu.gyro_unscaled);
  VECT3_ADD(acc_avg, imu.accel_unscaled);

  _reduced_propagation_rate++;
  if (_reduced_propagation_rate < (PERIODIC_FREQUENCY / AHRS_PROPAGATE_FREQUENCY))
  {
  }
  else
  {
    _reduced_propagation_rate = 0;

    RATES_SDIV(imu.gyro_unscaled, gyr_avg, (PERIODIC_FREQUENCY / AHRS_PROPAGATE_FREQUENCY) );
    INT_RATES_ZERO(gyr_avg);

    ImuScaleGyro(imu);

    ahrs_propagate();

    _reduced_correction_rate++;
    if (_reduced_correction_rate >= (AHRS_PROPAGATE_FREQUENCY / AHRS_CORRECT_FREQUENCY))
    {
      _reduced_correction_rate = 0;
      VECT3_SDIV(imu.accel_unscaled, acc_avg, (PERIODIC_FREQUENCY / AHRS_CORRECT_FREQUENCY) );
      INT_VECT3_ZERO(acc_avg);
      ImuScaleAccel(imu);
      ahrs_update_accel();
    }

#ifdef AHRS_TRIGGERED_ATTITUDE_LOOP
    new_ins_attitude = 1;
#endif
  }
#endif //PERIODIC_FREQUENCY

}

static inline void on_mag_event(void)
{
#if USE_MAGNETOMETER
  ImuScaleMag(imu);
  if (ahrs.status == AHRS_RUNNING) {
    ahrs_update_mag();
  }
#endif
}

#endif // USE_IMU

#endif // USE_AHRS

#if USE_BAROMETER

static inline void on_baro_abs_event( void ) {
  ins_update_baro();
}

static inline void on_baro_dif_event( void ) {

}

#endif // USE_BAROMETER