New Readme and photo

First edits to the readme

README.md

@@ -1,31 +1,11 @@
-# nrf24-multipro
-nRF24L01 multi-protocol RC transmitter
+# nrf24_cx10_pc
 
-![Screenshot](http://i.imgur.com/AeMJKzT.jpg)
-
-Create a model in OpenTX using external module in PPM mode, 12 channels and TAER sequence order.
 
-#####Protocol is selected with stick position at startup:
+![Screenshot](http://i.imgur.com/AeMJKzT.jpg)
+##nRF24L01 RC transmitter for Cheerson CX-10 with serial interface to a PC
 
-Rudder right + Aileron left = EAchine H8 mini 3D, JJRC H20/H22   
-Elevator down + Aileron left = Syma X5C-1/X11/X11C/X12  
-Elevator down + Aileron right = Attop YD-822/YD-829/YD-829C ...  
-Elevator up + Aileron right = EAchine H8(C) mini, BayangToys X6/X7/X9, JJRC JJ850, Floureon H101 ...  
-Elevator up + Aileron left = EAchine H7  
-Elevator up = WLToys V202/252/272, JXD 385/388, JJRC H6C, Yizhan Tarantula X6 ...  
-Elevator down = EAchine CG023/CG031/3D X4  
-Aileron left = Cheerson CX-10 green pcb  
-Aileron right = Cheerson CX-10 blue pcb & some newer red pcb, CX-10A, CX-10C, CX11, CX12, Floureon FX10, JJRC DHD D1  
+This is a fork of []goebish/nrf24_multipro](https://github.com/goebish/nrf24_multipro).
 
-Last used protocol is automatically selected if stick is in neutral position.
+This code will always select Cheerson CX-10 Blue PCB protocol for operation, but the code for using other quadcopters is still intact.  
 
-#####Extra features (if available on aircraft):
 
-Channel 5: led light, 3 pos. rate on CX-10, H7, inverted flight on H101  
-Channel 6: flip control  
-Channel 7: still camera  
-Channel 8: video camera  
-Channel 9: headless  
-Channel 10: calibrate Y (V2x2), pitch trim (H7), RTH (H8 mini/H20), 360deg flip mode (H8 mini 3D/H22)  
-Channel 11: calibrate X (V2x2), roll trim (H7)  
-Channel 12: Reset / Rebind