ESP32 PoE Somfy RTS Bridge

Not yet verified

This header is currently work in progress and not yet tested/verified.

Partlist

• ESP32 PoE
• UEXT connector HIF3FB-10DA-2.54DSA(69)
• Ebyte E07-433M20S
• 433MHz Antenna

Shield variants

ESP32SomfyPOE

• C1101 radio module is mounted on the top side of the board
• One mounting hole for the header
• Length smaller than the ESP32 PoE board, fits in a Raspberry Pi case or a junction box

ESP32SomfyPOE_bottom

• C1101 radio module is mounted on the bottom side of the board
• Smaller height than the ESP32SomfyPOE variant
• One mounting hole for the header
• Length smaller than the ESP32 PoE board, fits in a Raspberry Pi case or a junction box

ESP32SomfyPOE_rotated

• Smallest variant, but no mounting hole for the header
• Ideal for a 3D printed case

Software

https://github.com/rstrouse/ESPSomfy-RTS

Configuration

Radio

Parameter	Value
SCLK	GPIO_14
CSN	GPIO_13
MOSI	GPIO_15
MISO	GPIO_16
TX	GPIO_04
RX	GPIO_36

Network

Parameter	Value
PHY Chip	LAN8720
Address	PHY 0
Clock Mode	GPIO_17 OUT
Power Pin	GPIO_12
MDC Pin	GPIO_23
MDIO Pin	GPIO_18