helpner

Detect the content of CLI help messages

⚠️ This library is a work in progress and a proof of concept.

Helpner can be used to explore the positions of commands (CMD), arguments (ARG) and options (OPT) from Command Line Interface program help's messages, using Named Entity Recognition (NER).

---

📝 Examples

Lets see some examples before reading on.

flit install --help | helpner highlight

make --help | helpner highlight

These images are svg screen captures of running the helpner highlight against two help messages, flit install and make in this case.

Some notes:

• The model which powers helpner is an statistical model, meaning the final output (in the case of the programs shown in the figures) is a prediction which may not be most accurate, see spaCy models for more info on this point.

• The model cannot be better than the data it was built on, and the data which powers the model, is by no means complete or perfect. More info on the data generator can be seen in the corresponding repository cli-help-maker.

With this in mind, lets keep reading 😄

...why this:question:

Why not? While reading through docopt-ng I thought if it would be possible to detect the components ¹ of a command line interface program and extract them. It turned out to be a fun project. It isn't the best approach for the task, but it allowed to explore a different application of AI, this time from the from and for the console (a nice mix of spaCy and rich!).

👩‍💻 Usage

helpner's CLI is composed of 3 subcommands:

• helpner highlight: Main command, throw some color 🌈 to the help messages with rich!

Pipe the help message from the CLI program stdin to the program, and it will print back the original message with the entities detected highlighted and wrapped in a panel. The style applied can be modified for each entity using the options:

❯ make --help | helpner highlight --style-opt 'red on white' --style-arg 'bold yellow' --style-cmd 'underline blue'

It can also capture console content and write it to an svg file thanks to rich:

❯ make --help | helpner highlight --style-opt 'red on white' --style-arg 'bold yellow' --style-cmd 'underline blue' --save-svg --svg-filename make-other-help.svg

• helpner parse: It parses the help message, shows the content detected by the model. The keys correspond to the content found, and the values are a tuple with the entity detected and the positions in the string.

The content can be either shown as JSON (it may come handy to dump the content to a file):

make --help | helpner parse --json > make-helpner.json

Or as a Python's dict:

❯ make --help | helpner parse --no-json
{
    make: ('CMD', 7, 11),
    [target] ...: ('ARG', 22, 34),
    -b, -m: ('OPT', 46, 52),
    -B, --always-make: ('OPT', 103, 120),
    -C DIRECTORY, --directory=DIRECTORY: ('OPT', 167, 202),
    -d: ('OPT', 278, 280),
    --debug[=FLAGS]: ('OPT', 345, 360),
    -e, --environment-overrides: ('OPT', 421, 448),
    --eval=STRING: ('OPT', 523, 536),
    -f FILE, --file=FILE, --makefile=FILE: ('OPT', 594, 631),
    -h, --help: ('OPT', 689, 699),
    -i, --ignore-errors: ('OPT', 748, 767),
    -I DIRECTORY, --include-dir=DIRECTORY: ('OPT', 806, 843),
    -j [N]: ('OPT', 917, 923),
    , --jobs[=N]: ('ARG', 923, 935),
    -k, --keep-going: ('OPT', 996, 1012),
    -l [N]: ('OPT', 1070, 1076),
    -L, --check-symlink-times: ('OPT', 1195, 1220),
    -n, --just-print, --dry-run, --recon: ('OPT', 1275, 1311),
    recipe: ('CMD', 1365, 1371),
    -o FILE, --old-file=FILE, --assume-old=FILE: ('OPT', 1392, 1435),
    -O[TYPE], --output-sync[=TYPE]: ('OPT', 1518, 1548),
    -p, --print-data-base: ('OPT', 1626, 1647),
    -q, --question: ('OPT', 1688, 1702),
    -r, --no-builtin-rules: ('OPT', 1765, 1787),
    -R, --no-builtin-variables: ('OPT', 1832, 1858),
    -s, --silent, --quiet: ('OPT', 1902, 1923),
    -S, --no-keep-going, --stop: ('OPT', 1952, 1979),
    -t, --touch: ('OPT', 2026, 2037),
    --trace: ('OPT', 2096, 2103),
    -v, --version: ('OPT', 2153, 2166),
    -w, --print-directory: ('OPT', 2226, 2247),
    --no-print-directory: ('OPT', 2285, 2305),
    -W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE: ('OPT', 2365, 2424),
    --warn-undefined-variables: ('OPT', 2493, 2519)
}

• and helpner download, which will be explained in the Installation section.

More examples can be seen in assets folder, and better yet, test what you want by yourself. Just keep in mind... The model is far from perfect, the data generator is still a work in progress.

🔧 Installation

You can install helpner via pip (almost ready):

pip install helpner

The program still needs a model to make the predictions, which can be obtained similar to how you would do it with spaCy's models².

So in a second step, you can run the following command:

helpner download

This command will (pip) install the model from github releases, which facilitates two things:

• The model can be updated independently from helpner, given that both things can evolve at different speeds

• Simplifies finding the most updated model available (which should be the only one relevant anyway).

In case the command fails and it couldn't install the package, it will point to the models directly.

💡 How does it work?

The following sketch³ shows the parts involved in the final program:

• cli-help-maker: A library that allows to generate help messages for dummy command line programs, with annotations of the three entities (CMD, ARG and OPT).

• helpner-core: The spacy project which allows to smoothly manage the end-to-end workflow. More project examples can be found in explosion's projects repository.

  • releases: Releases of helpner-core models, uploaded as python packages installable via pip install.

• helpner: The entrypoint to the model via command line interface.

Footnotes

1. See docopt for a better explanation of the components. ↩

2. To see how spaCy's download command works visit: spacy download. ↩

3. Visit excalidraw if you don't know it, it's amazing. ↩