Still in alpha; trying to catch any bugs especially with Prusa 2.5 have done some successful prints
Copy the files/folders to C:\Program Files\Prusa3D\PrusaSlicer\resources\profiles
then open prusa slicer to install printers;
there are seperate printers for each mode;
If previous version installed; may need to deleted old printer then reintall printer under 'Configuration Wizard' in prusaslicer
Revision History
0.01 Initial Realease
0.02 2/20/23
-
fixed bed size
Craftbot gives no specific info on bed size accurately; I still maybe off by +/- mm in the various modes
-
added versioning to start gcode
check start gcode under printer setting
should start with ";V0.02 Start code PrusaSlicer"
0.03
-
fixed stringing; temp for generic PETG too high
-
add FAST setting for 0.2 layer height
-
gcode should start with ";V0.03 Start code PrusaSlicer"
deleteOldSettings.bat - to delete craftbot printer definition (re-add new craftbot through configuration wizard in prusa slicer after overwriting files in the C:\Program Files\Prusa3D\PrusaSlicer\resources\profiles directory with new version)
0.04
-
fixed pressure advance ie disabled due to not supported
-
gcode should start with ";V0.04 Start code PrusaSlicer"
0.05
-
adjusted X bed size max
-
gcode should start with ";V0.05 Start code PrusaSlicer"
0.06
-
bug fix
-
gcode should start with ";V0.06 Start code PrusaSlicer"
for debuging please enclose prusa project with gcode & stl for me in zip; thanks