Skip to content

pomeroyb/PortalGun

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

11 Commits
 
 
 
 

Repository files navigation

PortalGun

Code to control a Portal Gun (From Rick and Morty)

##Libraries Download and install the following libraries:

Pin Definitions

If you deviate from the following definitions, you will have to change the firmware to account for that.

LED Display Trinket Pro Pin
SCL A5
SDA A4
GND GND
Vcc 5V
Vi2c 5V
Rotary Encoder Trinket Pro Pin
A A1
B A0
GND GND
Button A2
LED Trinket Pro Pin
Top Bulb 9
Front Right 3
Front Center 5
Front Left 6

Installing Firmware

First, set up the Arduino IDE according to Adafruit. Connect your Trinket Pro and make sure the bootloader is running, then click upload.

Button Behavior

The rotary encoder has a click button, and we can detect a single click, a double click, and a hold.

  • Single Click : Wakes the Trinket Pro from low power mode
  • Double Click : Reset to dimension C137
  • Hold : Turn off LEDs and put the Trinket Pro into a low power mode.

##Installing SFX The main branch doesn't have SFX support. Use the SFX branch to test this out (I found that the speaker inside the case was too quiet to hear.)

About

Code to control a Portal Gun (From Rick and Morty)

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Other 100.0%