dkms modules fail to install with 5.11 linux headers (missing autoconf.h) #48
Comments
|
Thanks for the report @jmstriegel. We've updated the kernel since 7612 to 7614 and I've verified that autoconf.h is included. Can you verify and confirm the issues you had with 7612 aren't present? |
jackpot51
pushed a commit
that referenced
this issue
Jun 22, 2021
BugLink: https://bugs.launchpad.net/bugs/1929455 [ Upstream commit 0f20615 ] Fix BPF_CORE_READ_BITFIELD() macro used for reading CO-RE-relocatable bitfields. Missing breaks in a switch caused 8-byte reads always. This can confuse libbpf because it does strict checks that memory load size corresponds to the original size of the field, which in this case quite often would be wrong. After fixing that, we run into another problem, which quite subtle, so worth documenting here. The issue is in Clang optimization and CO-RE relocation interactions. Without that asm volatile construct (also known as barrier_var()), Clang will re-order BYTE_OFFSET and BYTE_SIZE relocations and will apply BYTE_OFFSET 4 times for each switch case arm. This will result in the same error from libbpf about mismatch of memory load size and original field size. I.e., if we were reading u32, we'd still have *(u8 *), *(u16 *), *(u32 *), and *(u64 *) memory loads, three of which will fail. Using barrier_var() forces Clang to apply BYTE_OFFSET relocation first (and once) to calculate p, after which value of p is used without relocation in each of switch case arms, doing appropiately-sized memory load. Here's the list of relevant relocations and pieces of generated BPF code before and after this patch for test_core_reloc_bitfields_direct selftests. BEFORE ===== #45: core_reloc: insn #160 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 #46: core_reloc: insn #167 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #47: core_reloc: insn #174 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #48: core_reloc: insn #178 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #49: core_reloc: insn #182 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 157: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 159: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 160: b7 02 00 00 04 00 00 00 r2 = 4 ; BYTE_SIZE relocation here ^^^ 161: 66 02 07 00 03 00 00 00 if w2 s> 3 goto +7 <LBB0_63> 162: 16 02 0d 00 01 00 00 00 if w2 == 1 goto +13 <LBB0_65> 163: 16 02 01 00 02 00 00 00 if w2 == 2 goto +1 <LBB0_66> 164: 05 00 12 00 00 00 00 00 goto +18 <LBB0_69> 0000000000000528 <LBB0_66>: 165: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 167: 69 11 08 00 00 00 00 00 r1 = *(u16 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 168: 05 00 0e 00 00 00 00 00 goto +14 <LBB0_69> 0000000000000548 <LBB0_63>: 169: 16 02 0a 00 04 00 00 00 if w2 == 4 goto +10 <LBB0_67> 170: 16 02 01 00 08 00 00 00 if w2 == 8 goto +1 <LBB0_68> 171: 05 00 0b 00 00 00 00 00 goto +11 <LBB0_69> 0000000000000560 <LBB0_68>: 172: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 174: 79 11 08 00 00 00 00 00 r1 = *(u64 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 175: 05 00 07 00 00 00 00 00 goto +7 <LBB0_69> 0000000000000580 <LBB0_65>: 176: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 178: 71 11 08 00 00 00 00 00 r1 = *(u8 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 179: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 00000000000005a0 <LBB0_67>: 180: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 182: 61 11 08 00 00 00 00 00 r1 = *(u32 *)(r1 + 8) ; BYTE_OFFSET relo here w/ RIGHT size ^^^^^^^^^^^^^^^^ 00000000000005b8 <LBB0_69>: 183: 67 01 00 00 20 00 00 00 r1 <<= 32 184: b7 02 00 00 00 00 00 00 r2 = 0 185: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 186: c7 01 00 00 20 00 00 00 r1 s>>= 32 187: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000005e0 <LBB0_71>: 188: 77 01 00 00 20 00 00 00 r1 >>= 32 AFTER ===== #30: core_reloc: insn #132 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #31: core_reloc: insn #134 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 129: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 131: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 132: b7 01 00 00 08 00 00 00 r1 = 8 ; BYTE_OFFSET relo here ^^^ ; no size check for non-memory dereferencing instructions 133: 0f 12 00 00 00 00 00 00 r2 += r1 134: b7 03 00 00 04 00 00 00 r3 = 4 ; BYTE_SIZE relocation here ^^^ 135: 66 03 05 00 03 00 00 00 if w3 s> 3 goto +5 <LBB0_63> 136: 16 03 09 00 01 00 00 00 if w3 == 1 goto +9 <LBB0_65> 137: 16 03 01 00 02 00 00 00 if w3 == 2 goto +1 <LBB0_66> 138: 05 00 0a 00 00 00 00 00 goto +10 <LBB0_69> 0000000000000458 <LBB0_66>: 139: 69 21 00 00 00 00 00 00 r1 = *(u16 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 140: 05 00 08 00 00 00 00 00 goto +8 <LBB0_69> 0000000000000468 <LBB0_63>: 141: 16 03 06 00 04 00 00 00 if w3 == 4 goto +6 <LBB0_67> 142: 16 03 01 00 08 00 00 00 if w3 == 8 goto +1 <LBB0_68> 143: 05 00 05 00 00 00 00 00 goto +5 <LBB0_69> 0000000000000480 <LBB0_68>: 144: 79 21 00 00 00 00 00 00 r1 = *(u64 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 145: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 0000000000000490 <LBB0_65>: 146: 71 21 00 00 00 00 00 00 r1 = *(u8 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 147: 05 00 01 00 00 00 00 00 goto +1 <LBB0_69> 00000000000004a0 <LBB0_67>: 148: 61 21 00 00 00 00 00 00 r1 = *(u32 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 00000000000004a8 <LBB0_69>: 149: 67 01 00 00 20 00 00 00 r1 <<= 32 150: b7 02 00 00 00 00 00 00 r2 = 0 151: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 152: c7 01 00 00 20 00 00 00 r1 s>>= 32 153: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000004d0 <LBB0_71>: 154: 77 01 00 00 20 00 00 00 r1 >>= 323 Fixes: ee26dad ("libbpf: Add support for relocatable bitfields") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Lorenz Bauer <lmb@cloudflare.com> Link: https://lore.kernel.org/bpf/20210426192949.416837-4-andrii@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
jackpot51
pushed a commit
that referenced
this issue
Sep 20, 2023
[ Upstream commit 5439cfa ] Occasionally, with './test_progs -j' on my vm, I will hit the following failure: test_cgrp_local_storage:PASS:join_cgroup /cgrp_local_storage 0 nsec test_cgroup_iter_sleepable:PASS:skel_open 0 nsec test_cgroup_iter_sleepable:PASS:skel_load 0 nsec test_cgroup_iter_sleepable:PASS:attach_iter 0 nsec test_cgroup_iter_sleepable:PASS:iter_create 0 nsec test_cgroup_iter_sleepable:FAIL:cgroup_id unexpected cgroup_id: actual 1 != expected 2812 #48/5 cgrp_local_storage/cgroup_iter_sleepable:FAIL #48 cgrp_local_storage:FAIL Finally, I decided to do some investigation since the test is introduced by myself. It turns out the reason is due to cgroup_fd with value 0. In cgroup_iter, a cgroup_fd of value 0 means the root cgroup. /* from cgroup_iter.c */ if (fd) cgrp = cgroup_v1v2_get_from_fd(fd); else if (id) cgrp = cgroup_get_from_id(id); else /* walk the entire hierarchy by default. */ cgrp = cgroup_get_from_path("/"); That is why we got cgroup_id 1 instead of expected 2812. Why we got a cgroup_fd 0? Nobody should really touch 'stdin' (fd 0) in test_progs. I traced 'close' syscall with stack trace and found the root cause, which is a bug in bpf_obj_pinning.c. Basically, the code closed fd 0 although it should not. Fixing the bug in bpf_obj_pinning.c also resolved the above cgroup_iter_sleepable subtest failure. Fixes: 3b22f98 ("selftests/bpf: Add path_fd-based BPF_OBJ_PIN and BPF_OBJ_GET tests") Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230827150551.1743497-1-yonghong.song@linux.dev Signed-off-by: Sasha Levin <sashal@kernel.org>
mmstick
pushed a commit
that referenced
this issue
Jan 2, 2024
[ Upstream commit fe57575 ] The `cgrp_local_storage` test triggers a kernel panic like: # ./test_progs -t cgrp_local_storage Can't find bpf_testmod.ko kernel module: -2 WARNING! Selftests relying on bpf_testmod.ko will be skipped. [ 550.930632] CPU 1 Unable to handle kernel paging request at virtual address 0000000000000080, era == ffff80000200be34, ra == ffff80000200be00 [ 550.931781] Oops[#1]: [ 550.931966] CPU: 1 PID: 1303 Comm: test_progs Not tainted 6.7.0-rc2-loong-devel-g2f56bb0d2327 #35 a896aca3f4164f09cc346f89f2e09832e07be5f6 [ 550.932215] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 [ 550.932403] pc ffff80000200be34 ra ffff80000200be00 tp 9000000108350000 sp 9000000108353dc0 [ 550.932545] a0 0000000000000000 a1 0000000000000517 a2 0000000000000118 a3 00007ffffbb15558 [ 550.932682] a4 00007ffffbb15620 a5 90000001004e7700 a6 0000000000000021 a7 0000000000000118 [ 550.932824] t0 ffff80000200bdc0 t1 0000000000000517 t2 0000000000000517 t3 00007ffff1c06ee0 [ 550.932961] t4 0000555578ae04d0 t5 fffffffffffffff8 t6 0000000000000004 t7 0000000000000020 [ 550.933097] t8 0000000000000040 u0 00000000000007b8 s9 9000000108353e00 s0 90000001004e7700 [ 550.933241] s1 9000000004005000 s2 0000000000000001 s3 0000000000000000 s4 0000555555eb2ec8 [ 550.933379] s5 00007ffffbb15bb8 s6 00007ffff1dafd60 s7 000055555663f610 s8 00007ffff1db0050 [ 550.933520] ra: ffff80000200be00 bpf_prog_98f1b9e767be2a84_on_enter+0x40/0x200 [ 550.933911] ERA: ffff80000200be34 bpf_prog_98f1b9e767be2a84_on_enter+0x74/0x200 [ 550.934105] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 550.934596] PRMD: 00000004 (PPLV0 +PIE -PWE) [ 550.934712] EUEN: 00000003 (+FPE +SXE -ASXE -BTE) [ 550.934836] ECFG: 00071c1c (LIE=2-4,10-12 VS=7) [ 550.934976] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 550.935097] BADV: 0000000000000080 [ 550.935181] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) [ 550.935291] Modules linked in: [ 550.935391] Process test_progs (pid: 1303, threadinfo=000000006c3b1c41, task=0000000061f84a55) [ 550.935643] Stack : 00007ffffbb15bb8 0000555555eb2ec8 0000000000000000 0000000000000001 [ 550.935844] 9000000004005000 ffff80001b864000 00007ffffbb15450 90000000029aa034 [ 550.935990] 0000000000000000 9000000108353ec0 0000000000000118 d07d9dfb09721a09 [ 550.936175] 0000000000000001 0000000000000000 9000000108353ec0 0000000000000118 [ 550.936314] 9000000101d46ad0 900000000290abf0 000055555663f610 0000000000000000 [ 550.936479] 0000000000000003 9000000108353ec0 00007ffffbb15450 90000000029d7288 [ 550.936635] 00007ffff1dafd60 000055555663f610 0000000000000000 0000000000000003 [ 550.936779] 9000000108353ec0 90000000035dd1f0 00007ffff1dafd58 9000000002841c5c [ 550.936939] 0000000000000119 0000555555eea5a8 00007ffff1d78780 00007ffffbb153e0 [ 550.937083] ffffffffffffffda 00007ffffbb15518 0000000000000040 00007ffffbb15558 [ 550.937224] ... [ 550.937299] Call Trace: [ 550.937521] [<ffff80000200be34>] bpf_prog_98f1b9e767be2a84_on_enter+0x74/0x200 [ 550.937910] [<90000000029aa034>] bpf_trace_run2+0x90/0x154 [ 550.938105] [<900000000290abf0>] syscall_trace_enter.isra.0+0x1cc/0x200 [ 550.938224] [<90000000035dd1f0>] do_syscall+0x48/0x94 [ 550.938319] [<9000000002841c5c>] handle_syscall+0xbc/0x158 [ 550.938477] [ 550.938607] Code: 580009ae 50016000 262402e4 <28c20085> 14092084 03a00084 16000024 03240084 00150006 [ 550.938851] [ 550.939021] ---[ end trace 0000000000000000 ]--- Further investigation shows that this panic is triggered by memory load operations: ptr = bpf_cgrp_storage_get(&map_a, task->cgroups->dfl_cgrp, 0, BPF_LOCAL_STORAGE_GET_F_CREATE); The expression `task->cgroups->dfl_cgrp` involves two memory load. Since the field offset fits in imm12 or imm14, we use ldd or ldptrd instructions. But both instructions have the side effect that it will signed-extended the imm operand. Finally, we got the wrong addresses and panics is inevitable. Use a generic ldxd instruction to avoid this kind of issues. With this change, we have: # ./test_progs -t cgrp_local_storage Can't find bpf_testmod.ko kernel module: -2 WARNING! Selftests relying on bpf_testmod.ko will be skipped. test_cgrp_local_storage:PASS:join_cgroup /cgrp_local_storage 0 nsec #48/1 cgrp_local_storage/tp_btf:OK test_attach_cgroup:PASS:skel_open 0 nsec test_attach_cgroup:PASS:prog_attach 0 nsec test_attach_cgroup:PASS:prog_attach 0 nsec libbpf: prog 'update_cookie_tracing': failed to attach: ERROR: strerror_r(-524)=22 test_attach_cgroup:FAIL:prog_attach unexpected error: -524 #48/2 cgrp_local_storage/attach_cgroup:FAIL test_recursion:PASS:skel_open_and_load 0 nsec libbpf: prog 'on_lookup': failed to attach: ERROR: strerror_r(-524)=22 libbpf: prog 'on_lookup': failed to auto-attach: -524 test_recursion:FAIL:skel_attach unexpected error: -524 (errno 524) #48/3 cgrp_local_storage/recursion:FAIL #48/4 cgrp_local_storage/negative:OK #48/5 cgrp_local_storage/cgroup_iter_sleepable:OK test_yes_rcu_lock:PASS:skel_open 0 nsec test_yes_rcu_lock:PASS:skel_load 0 nsec libbpf: prog 'yes_rcu_lock': failed to attach: ERROR: strerror_r(-524)=22 libbpf: prog 'yes_rcu_lock': failed to auto-attach: -524 test_yes_rcu_lock:FAIL:skel_attach unexpected error: -524 (errno 524) #48/6 cgrp_local_storage/yes_rcu_lock:FAIL #48/7 cgrp_local_storage/no_rcu_lock:OK #48 cgrp_local_storage:FAIL All error logs: test_cgrp_local_storage:PASS:join_cgroup /cgrp_local_storage 0 nsec test_attach_cgroup:PASS:skel_open 0 nsec test_attach_cgroup:PASS:prog_attach 0 nsec test_attach_cgroup:PASS:prog_attach 0 nsec libbpf: prog 'update_cookie_tracing': failed to attach: ERROR: strerror_r(-524)=22 test_attach_cgroup:FAIL:prog_attach unexpected error: -524 #48/2 cgrp_local_storage/attach_cgroup:FAIL test_recursion:PASS:skel_open_and_load 0 nsec libbpf: prog 'on_lookup': failed to attach: ERROR: strerror_r(-524)=22 libbpf: prog 'on_lookup': failed to auto-attach: -524 test_recursion:FAIL:skel_attach unexpected error: -524 (errno 524) #48/3 cgrp_local_storage/recursion:FAIL test_yes_rcu_lock:PASS:skel_open 0 nsec test_yes_rcu_lock:PASS:skel_load 0 nsec libbpf: prog 'yes_rcu_lock': failed to attach: ERROR: strerror_r(-524)=22 libbpf: prog 'yes_rcu_lock': failed to auto-attach: -524 test_yes_rcu_lock:FAIL:skel_attach unexpected error: -524 (errno 524) #48/6 cgrp_local_storage/yes_rcu_lock:FAIL #48 cgrp_local_storage:FAIL Summary: 0/4 PASSED, 0 SKIPPED, 1 FAILED No panics any more (The test still failed because lack of BPF trampoline which I am actively working on). Fixes: 5dc6155 ("LoongArch: Add BPF JIT support") Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Sasha Levin <sashal@kernel.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
After a recent update to the 5.11 kernel, I noticed that the bcmwl-kernel-source wireless driver stopped working. Attempting to reinstall, I noticed the following message during the dkms build:
ERROR (dkms apport): kernel package linux-headers-5.11.0-7612-generic is not supportedThis also caused the system76-dkms and system76-io-dkms packages to discontinue working on my system.
I ended up tracking this down to a missing /usr/src/linux-headers-5.11.0-7612-generic/include/generated/autoconf.h file. I tried manually reinstalling linux-headers-5.11.0-7612-generic, which includes the file, but for some reason autoconf.h refuses to install to the destination folder. I had to manually extract it from the .deb and copy it to the destination, after which the dkms modules all build and appear to function correctly.
I suspect this a deb packaging issue, but it's not clear to me how this file is being excluded from installation. I've seen a number of somewhat similar bug reports for broken drivers/firmware that may be linked to this.
The text was updated successfully, but these errors were encountered: