Mac Controller Setup

The PSEye camera should not require any effort to get it to work.

Your computer must have a Bluetooth radio. The PSMove controller has to be paired to the computer's Bluetooth radio.

1. Plug the controller into the PC by USB.
2. Run Binaries\Mac\psmovepair
3. When prompted, disconnect the USB and press the PS button.

That's it. You are connected. In the future (i.e., after reboot) you should not have to run psmovepair again, simply pressing the PS button on the controller should connect you.

Run Binaries\Mac\magnetometer_calibration. Note that during the second phase of the magnetometer calibration, the controller must be standing upright, with the sphere pointing up toward the ceiling/sky.

Test that the controller and camera are working together by running Binaries\Mac\test_tracker and Binaries\Mac\test_opengl.