qbittorrent 3.1.11-win 7 don't respect upload limit setting (standard and alternative)

[petrus-bonekamp]

impossible to use internet connection to other application. Qbittorrent use all bandwith upload.
respect instead download standard limit, don't respect alternative limit.

[sledgehammer999]

Give a screenshot of your tools-->options...->speed

[petrus-bonekamp]

[sledgehammer999]

Try disabling "apply rate limit to utp connections". If that doesn't work try disabling "enable bandwidth management(utp)".

[petrus-bonekamp]

I will try but with same confiuguration before upgtade to current veraion all work fine. I see you close other issue, but is not the same matter. Wit ver 10 limit work fine but browser navigaton hang when contact google o or webaites uae google apis.

[sledgehammer999]

qbt doesn't block any site. You're probably using all your up OR down bandwith and you cannot contact these sites.
If you disable the options mentioned above(one at a time) you might solve your other problem too.
Otherwise use the forum for troubleshooting networking problems: http://forum.qbittorrent.org/

[petrus-bonekamp]

make new ssettings, it doesnt work, upload limit not respect

[sledgehammer999]

Enable enable bandwidth management(utp) and keep disabled the apply rate limit to utp connections.

[gdeadbeat]

I had the same bandwidth issue in qBittorrent 3.1.11/Windows and have temporarily solved it by disabling DHT. I have no options enabled on the Options-BitTorrent page and have only enabled bandwidth management on the Options-Speed page. All of the options on my Options-BitTorrent page seemed to work just fine in qBittorrent 3.1.10, so this would seem to be a regression in 3.1.11. In addition, qBittorrent 3.1.11 is not respecting Alternative Global Rate Limits.

[petrus-bonekamp]

workaround suggested by sledgehammer999 have no effect.
qbittorrent 3.1.11 is not respecting upload rate limit (standard & alternative) & download alternative rate limit.
I think this is a regression in 3.1.11 versus 3.1.10.

Confirm that other problem (stop sites using googleapis when qbittorrent in use)

[sledgehammer999]

Can you try the latest alpha build? ->http://builds.shiki.hu/qbittorrent_3.2.0alpha_20141207_78d4258_setup.exe

[glugluck]

I'm having a similar problem on Win7 32 bit.
If I set the upload global limit to any value above 50 kB/s, the speed gets limited to 50 kB/s (I reach 85-90 kB/s with speed limits disabled, or with the option "apply limit to uTP connections" unchecked). If I choose a value under 50, it gets limited to a lower value (40 kB/s-->25 kB/s througput). About the same with alternative limits.

[DjDiabolik]

Ops... i have the same exact problems and, my error, i have open a duplicate here:
#3129

A screenshot:
http://i.imgur.com/5k7BzLg.png

[dreamhunt]

Same problem on Linux and 3.2.0. Tried with git version 3.3.0 and there is the same problem. When I set Apply rate limit to uTP connections, all work fine.

[sledgehammer999]

Can you open a bug in the libtorrent bug tracker instead? It is their problem that μTP (uTP) causes this kind of problem.
And if you do, please leave the link here too.
Link: https://code.google.com/p/libtorrent/issues/list