Added my personal keymap

keyboard/kc60/Makefile

@@ -27,7 +27,7 @@
 # make flip-ee = Download the eeprom file to the device, using Atmel FLIP
 #                (must have Atmel FLIP installed).
 #
-# make debug = Start either simulavr or avarice as specified for debugging,
+# make debug = Start either simulavr or avarice as specified for debugging, 
 #              with avr-gdb or avr-insight as the front end for debugging.
 #
 # make filename.s = Just compile filename.c into the assembler code only.
@@ -111,3 +111,4 @@ AUDIO_ENABLE ?= no           # Audio output on port C6
 ifndef QUANTUM_DIR
 	include ../../Makefile
 endif
+

keyboard/kc60/config.h

@@ -45,7 +45,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 // Possible pins for columns include: F1  F0  E6  D7  D6  D4  C7  C6  B7  B5  B4  B3  B1  B0
 // Pins for rows include:  D0  D1  F6  F7  D5
-// KC60 Version 2
+// KC60 Version 2 
 #define MATRIX_ROW_PINS { D0, D1, F6, F7, D5 }
 #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3 }
 #define UNUSED_PINS

keyboard/kc60/kc60.c

@@ -62,7 +62,7 @@ void backlight_init_ports()
   DDRB |= (1<<6);
   PORTB &= ~(1<<6);
 
-  // Use full 16-bit resolution.
+  // Use full 16-bit resolution. 
   ICR1 = 0xFFFF;
 
   // I could write a wall of text here to explain... but TL;DW
@@ -99,7 +99,7 @@ void backlight_set(uint8_t level)
     // Set the brightness
     CHANNEL = 0xFFFF;
   }
-  else
+  else        
   {
     // Turn on PWM control of PB6
     TCCR1A |= _BV(COM1B1);

keyboard/kc60/keymaps/stanleylai/Makefile

@@ -0,0 +1,63 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no         # Console for debug(+400)
+COMMAND_ENABLE ?= no         # Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE ?= yes  # Allow locking of keyboard via magic key
+BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE ?= yes 			 # Enable WS2812 underglow RGB strip
+MIDI_ENABLE ?= no            # MIDI controls
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no           # Audio output on port C6
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= yes           # USB Nkey Rollover
+
+ifndef QUANTUM_DIR
+	include ../../Makefile
+endif

keyboard/kc60/keymaps/stanleylai/README.md

@@ -0,0 +1,26 @@
+Stanley Lai's Split Right Shift with Dedicated Arrow Keys
+======================
+
+![Image of KC60 with RGB Underglow](../ws2812/ws2812_example.jpg)
+
+## Quantum MK Firmware
+For the full Quantum feature list, see [the parent README.md](/README.md).
+
+## Keymap Notes
+- Keymap setup with split Right Shift in mind.
+- Right-side modifiers are setup as dedicated arrow keys
+
+### Base Layer Reference
+- Fn Layer indicated on keycap front legends.
+- Tapping Caps Lock key toggles Caps. Holding it down momentarily switches us to the Fn Layer.
+- Holding down "Fn" and "Page Down" momentarily switches us to the RGB Layer. Tapping "Page Down" behaves as expected.
+![Base Layer](base_layer.jpg)
+
+### RGB Layer Reference
+![RGB Layer](rgb_layer.jpg)
+
+## WS2812 Support
+By default, it is now setup for 16 LEDs on the PF5 breakout pin. See [included image](../ws2812/ws2812_wiring.jpg) for wiring reference.
+
+### Build
+To build this keymap, simply run `make KEYMAP=stanleylai`.