RPi 4B full upgrade od 32-bit OS suddenly changes the kernel architecture to aarch64 #5402
Comments
|
/var/log/apt/term.log in case if it is useful. Log started: 2023-03-26 20:34:06 |
|
The updated firmware now prefers the 64-bit kernel on a Pi 4 because it should give better performance in most situations. To continue to boot to the 32-bit kernel, add |
|
Thanks, this helped. |
|
For me, it broke hamachi VPN. The binary runs, but it stopped functioning correctly from VPN point. Took me 4 hours to find this. Maybe add a small note here on the download page about the config.txt? |
|
64-bit kernel with 32-bit userspace breaks quite a few netlink dependent kernel interfaces on ARM (x86 is fine). All IPsec based VPNs will no longer work due to a missing arm/aarch64 compat layer in the kernel. This is not fixable in the kernel without breaking userspace API/ABI compatibility. (Yes, I tried, and enabling the generic compat layer broke other networking applications.) This is a regression and will lock you out of remote devices if you can only access them via IPsec based VPN. Other VPN types may be affected as well. |
Heh. Same here! It wasn't immediately apparent why OctoDash would install fine with a fresh raspbian image, but as soon as the system was |
|
I was having same issue running my libs, And if i run: with normal update, the @pelwell method, arm_64bit=0 > config.txt, works fine. But it's a bit strange, |
|
I just had to rebuild the r4pi 32bit package builder and ran into this issue since so many of the setup tools rely on "correct" discovery of the aarch64 and armv7l names to identify whether it's the 32 or 64 bit version of the OS. I'm lucky that it's my project, so I can go through everything and rewrite it all to use a different mechanism to identify the OS architecture and then sub in the aarch64 and armv7l names but that's obviously going to take some time. In the meantime, no 32bit builds for downstream users of my project. Bit of a perfect storm situation for me, but frustrating nonetheless. |
|
It hosed my install of Paperless-NGX, too. |
Same happened to me :-( |
Has anyone found a workaround for this? Maybe altering the config.txt to arm64=0? |
|
See the first response: #5402 (comment) |
Thanks for the reply. I guess that doesn't help in this specific instance unfortunately, as the project only supports 64bit as far as I understand. See s-martin's issue for more details |
|
The problems in this area stem from failing to distinguish between kernel architecture and userspace architecture. It is necessary to choose the correct indication for the thing being built. |
|
@pelwell For the upgrade process, Can't we add a kind of Do we have exactly which raspberry version it started to have 2 kernels architectures and the default armv_64=1? |
|
The change occurred in the firmware released with the 6.1.16 kernel: raspberrypi/rpi-firmware@7d6d960 |
Describe the bug
Not really sure if this is the bugbase. Please advise if I need to file this issue somewhere else.
I noticed that on my 32 bit Raspberry Pi OS Lite after doing "sudo apt-get update" followed by "sudo apt-get full-upgrade" and reboot, "uname -m" started reporting aarch64 instead of armv7l.
Steps to reproduce the behaviour
Device (s)
Raspberry Pi 4 Mod. B
System
System Information
Raspberry Pi 4 Model B Rev 1.5
PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)"
NAME="Raspbian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
Raspberry Pi reference 2023-02-21
Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, f2d385517c9631f2ded876deb1115725d0c75995, stage2
Linux rpi 5.15.84-v7l+ #1613 SMP Thu Jan 5 12:01:26 GMT 2023 armv7l GNU/Linux
Revision : c03115
Serial : 1000000014b32210
Model : Raspberry Pi 4 Model B Rev 1.5
Throttled flag : throttled=0x0
Camera : supported=0 detected=0, libcamera interfaces=0
Videocore information
Jan 5 2023 10:46:54
Copyright (c) 2012 Broadcom
version 8ba17717fbcedd4c3b6d4bce7e50c7af4155cba9 (clean) (release) (start)
alloc failures: 0
compactions: 0
legacy block fails: 0
Filesystem information
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 29813048 1333716 27236104 5% /
devtmpfs 1800660 0 1800660 0% /dev
tmpfs 1965524 0 1965524 0% /dev/shm
tmpfs 786212 1076 785136 1% /run
tmpfs 5120 4 5116 1% /run/lock
/dev/mmcblk0p1 261108 51024 210084 20% /boot
tmpfs 393104 0 393104 0% /run/user/1000
Filename Type Size Used Priority
/var/swap file 102396 0 -2
Package version information
raspberrypi-ui-mods:
Installed: (none)
raspberrypi-sys-mods:
Installed: 20221019
openbox:
Installed: (none)
lxpanel:
Installed: (none)
pcmanfm:
Installed: (none)
rpd-plym-splash:
Installed: (none)
Networking Information
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet x.x.x.x netmask x.x.x.x broadcast x.x.x.x
inet6 y::y.y.y.y prefixlen 64 scopeid 0x20
ether m.m.m.m txqueuelen 1000 (Ethernet)
RX packets 120 bytes 14435 (14.0 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 117 bytes 13991 (13.6 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet x.x.x.x netmask x.x.x.x
inet6 ::1 prefixlen 128 scopeid 0x10
loop txqueuelen 1000 (Local Loopback)
RX packets 10 bytes 1552 (1.5 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 10 bytes 1552 (1.5 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet x.x.x.x netmask x.x.x.x broadcast x.x.x.x
inet6 y::y.y.y.y prefixlen 64 scopeid 0x20
ether m.m.m.m txqueuelen 1000 (Ethernet)
RX packets 4 bytes 1114 (1.0 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 26 bytes 3717 (3.6 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
USB Information
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
Display Information
Running (F)KMS, console
/sys/class/drm/card0-HDMI-A-1
/sys/class/drm/card0-HDMI-A-2
/sys/class/drm/card0-Writeback-1
Connector 0 (32) HDMI-A-1 (disconnected)
Encoder 0 (31) TMDS
Connector 1 (41) HDMI-A-2 (disconnected)
Encoder 1 (40) TMDS
HDMI0: HDMI_HOTPLUG = 0x00000000
HDMI1: HDMI_HOTPLUG = 0x00000000
/sys/kernel/debug/dri/0/state:
plane[51]: plane-0
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=0
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[62]: plane-1
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=0
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[73]: plane-2
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=0
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[84]: plane-3
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=0
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[95]: plane-4
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=0
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[106]: plane-5
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=0
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[117]: plane-6
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=1
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[127]: plane-7
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=2
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[137]: plane-8
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=3
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[147]: plane-9
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=4
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[157]: plane-10
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=5
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[167]: plane-11
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=6
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[177]: plane-12
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=7
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[187]: plane-13
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=8
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[197]: plane-14
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=9
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[207]: plane-15
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=a
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[217]: plane-16
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=b
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[227]: plane-17
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=c
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[237]: plane-18
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=d
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[247]: plane-19
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=e
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[257]: plane-20
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=f
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[267]: plane-21
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=10
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[277]: plane-22
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=11
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[287]: plane-23
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=11
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[297]: plane-24
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=11
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[307]: plane-25
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=11
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[317]: plane-26
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=11
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[327]: plane-27
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=11
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
crtc[61]: crtc-0
enable=0
active=0
self_refresh_active=0
planes_changed=0
mode_changed=0
active_changed=0
connectors_changed=0
color_mgmt_changed=0
plane_mask=0
connector_mask=0
encoder_mask=0
mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
crtc[72]: crtc-1
enable=0
active=0
self_refresh_active=0
planes_changed=0
mode_changed=0
active_changed=0
connectors_changed=0
color_mgmt_changed=0
plane_mask=0
connector_mask=0
encoder_mask=0
mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
crtc[83]: crtc-2
enable=0
active=0
self_refresh_active=0
planes_changed=0
mode_changed=0
active_changed=0
connectors_changed=0
color_mgmt_changed=0
plane_mask=0
connector_mask=0
encoder_mask=0
mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
crtc[94]: crtc-3
enable=0
active=0
self_refresh_active=0
planes_changed=0
mode_changed=0
active_changed=0
connectors_changed=0
color_mgmt_changed=0
plane_mask=0
connector_mask=0
encoder_mask=0
mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
crtc[105]: crtc-4
enable=0
active=0
self_refresh_active=0
planes_changed=0
mode_changed=0
active_changed=0
connectors_changed=0
color_mgmt_changed=0
plane_mask=0
connector_mask=0
encoder_mask=0
mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
crtc[116]: crtc-5
enable=0
active=0
self_refresh_active=0
planes_changed=0
mode_changed=0
active_changed=0
connectors_changed=0
color_mgmt_changed=0
plane_mask=0
connector_mask=0
encoder_mask=0
mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
connector[32]: HDMI-A-1
crtc=(null)
self_refresh_aware=0
connector[41]: HDMI-A-2
crtc=(null)
self_refresh_aware=0
connector[50]: Writeback-1
crtc=(null)
self_refresh_aware=0
config.txt
arm_boost=1
arm_freq=1800
audio_pwm_mode=514
camera_auto_detect=1
config_hdmi_boost=5
core_freq=500
core_freq_min=200
disable_commandline_tags=2
disable_l2cache=1
disable_overscan=1
display_auto_detect=1
display_hdmi_rotate=-1
display_lcd_rotate=-1
dvfs=3
enable_gic=1
force_eeprom_read=1
force_pwm_open=1
framebuffer_ignore_alpha=1
framebuffer_swap=1
gpu_freq=500
gpu_freq_min=250
init_uart_clock=0x2dc6c00
lcd_framerate=60
mask_gpu_interrupt0=3072
mask_gpu_interrupt1=25635
max_framebuffers=2
over_voltage_avs=-10000
pause_burst_frames=1
program_serial_random=1
total_mem=4096
hdmi_force_cec_address:0=65535
hdmi_force_cec_address:1=65535
hdmi_pixel_freq_limit:0=0x11e1a300
hdmi_pixel_freq_limit:1=0x11e1a300
device_tree=-
overlay_prefix=overlays/
hdmi_cvt:0=
hdmi_cvt:1=
hdmi_edid_filename:0=
hdmi_edid_filename:1=
hdmi_timings:0=
hdmi_timings:1=
cmdline.txt
coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=E4:5F:01:DF:8A:E2 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d1338895-02 rootfstype=ext4 fsck.repair=yes rootwait
raspi-gpio settings
BANK0 (GPIO 0 to 27):
GPIO 0: level=1 fsel=0 func=INPUT pull=UP
GPIO 1: level=1 fsel=0 func=INPUT pull=UP
GPIO 2: level=1 fsel=0 func=INPUT pull=UP
GPIO 3: level=1 fsel=0 func=INPUT pull=UP
GPIO 4: level=1 fsel=0 func=INPUT pull=UP
GPIO 5: level=1 fsel=0 func=INPUT pull=UP
GPIO 6: level=1 fsel=0 func=INPUT pull=UP
GPIO 7: level=1 fsel=0 func=INPUT pull=UP
GPIO 8: level=1 fsel=0 func=INPUT pull=UP
GPIO 9: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 10: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 11: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 12: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 13: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 14: level=1 fsel=0 func=INPUT pull=NONE
GPIO 15: level=1 fsel=0 func=INPUT pull=UP
GPIO 16: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 17: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 18: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 19: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 20: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 21: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 22: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 23: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 24: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 25: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 26: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 27: level=0 fsel=0 func=INPUT pull=DOWN
BANK1 (GPIO 28 to 45):
GPIO 28: level=1 fsel=2 alt=5 func=RGMII_MDIO pull=UP
GPIO 29: level=0 fsel=2 alt=5 func=RGMII_MDC pull=DOWN
GPIO 30: level=0 fsel=7 alt=3 func=CTS0 pull=UP
GPIO 31: level=0 fsel=7 alt=3 func=RTS0 pull=NONE
GPIO 32: level=1 fsel=7 alt=3 func=TXD0 pull=NONE
GPIO 33: level=1 fsel=7 alt=3 func=RXD0 pull=UP
GPIO 34: level=0 fsel=7 alt=3 func=SD1_CLK pull=NONE
GPIO 35: level=1 fsel=7 alt=3 func=SD1_CMD pull=UP
GPIO 36: level=1 fsel=7 alt=3 func=SD1_DAT0 pull=UP
GPIO 37: level=1 fsel=7 alt=3 func=SD1_DAT1 pull=UP
GPIO 38: level=1 fsel=7 alt=3 func=SD1_DAT2 pull=UP
GPIO 39: level=1 fsel=7 alt=3 func=SD1_DAT3 pull=UP
GPIO 40: level=0 fsel=4 alt=0 func=PWM1_0 pull=NONE
GPIO 41: level=0 fsel=4 alt=0 func=PWM1_1 pull=NONE
GPIO 42: level=0 fsel=1 func=OUTPUT pull=UP
GPIO 43: level=1 fsel=0 func=INPUT pull=UP
GPIO 44: level=1 fsel=0 func=INPUT pull=UP
GPIO 45: level=1 fsel=0 func=INPUT pull=UP
BANK2 (GPIO 46 to 53):
GPIO 46: level=0 fsel=0 func=INPUT pull=UP
GPIO 47: level=0 fsel=0 func=INPUT pull=UP
GPIO 48: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 49: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 50: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 51: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 52: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 53: level=0 fsel=0 func=INPUT pull=DOWN
vcdbg log messages
004499.149: arasan: arasan_emmc_open
004499.318: arasan: arasan_emmc_set_clock C0: 0x00800000 C1: 0x000e0047 emmc: 200000000 actual: 390625 div: 0x00000100 target: 400000 min: 400000 max: 400000 delay: 5
004604.082: arasan: arasan_emmc_set_clock C0: 0x00800000 C1: 0x000e0047 emmc: 200000000 actual: 390625 div: 0x00000100 target: 400000 min: 400000 max: 400000 delay: 5
004604.169: arasan: arasan_emmc_set_clock C0: 0x00800f00 C1: 0x000e0047 emmc: 200000000 actual: 390625 div: 0x00000100 target: 400000 min: 390000 max: 400000 delay: 5
004622.812: arasan: arasan_emmc_set_clock C0: 0x00800f06 C1: 0x000e0207 emmc: 200000000 actual: 50000000 div: 0x00000002 target: 50000000 min: 0 max: 50000000 delay: 1
004708.107: brfs: File read: /mfs/sd/config.txt
004709.060: brfs: File read: 2075 bytes
004730.724: HDMI0:EDID error reading EDID block 0 attempt 0
004731.740: HDMI0:EDID giving up on reading EDID block 0
004743.600: HDMI1:EDID error reading EDID block 0 attempt 0
004744.615: HDMI1:EDID giving up on reading EDID block 0
004746.630: brfs: File read: /mfs/sd/config.txt
005549.541: gpioman: gpioman_get_pin_num: pin DISPLAY_DSI_PORT not defined
005552.060: *** Restart logging
005552.079: brfs: File read: 2075 bytes
005557.589: hdmi: HDMI0:EDID error reading EDID block 0 attempt 0
005558.605: hdmi: HDMI0:EDID giving up on reading EDID block 0
005563.649: hdmi: HDMI0:EDID error reading EDID block 0 attempt 0
005564.666: hdmi: HDMI0:EDID giving up on reading EDID block 0
005564.682: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
005569.722: hdmi: HDMI1:EDID error reading EDID block 0 attempt 0
005570.739: hdmi: HDMI1:EDID giving up on reading EDID block 0
005575.779: hdmi: HDMI1:EDID error reading EDID block 0 attempt 0
005576.793: hdmi: HDMI1:EDID giving up on reading EDID block 0
005576.811: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
005576.826: HDMI0: hdmi_pixel_encoding: 300000000
005576.839: HDMI1: hdmi_pixel_encoding: 300000000
005581.449: dtb_file 'bcm2711-rpi-4-b.dtb'
005587.739: brfs: File read: /mfs/sd/bcm2711-rpi-4-b.dtb
005587.755: Loaded 'bcm2711-rpi-4-b.dtb' to 0x100 size 0xccc8
005600.821: brfs: File read: 52424 bytes
005619.495: brfs: File read: /mfs/sd/overlays/overlay_map.dtb
005694.489: brfs: File read: 2295 bytes
005698.470: brfs: File read: /mfs/sd/config.txt
005698.967: dtparam: audio=on
005709.473: brfs: File read: 2075 bytes
005736.477: brfs: File read: /mfs/sd/overlays/vc4-kms-v3d-pi4.dtbo
005801.274: Loaded overlay 'vc4-kms-v3d'
005967.258: brfs: File read: 3914 bytes
005970.640: brfs: File read: /mfs/sd/cmdline.txt
005970.679: Read command line from file 'cmdline.txt':
005970.692: 'console=serial0,115200 console=tty1 root=PARTUUID=d1338895-02 rootfstype=ext4 fsck.repair=yes rootwait'
006080.797: kernel=
006080.816: brfs: File read: 102 bytes
006688.523: brfs: File read: /mfs/sd/kernel7l.img
006688.543: Loaded 'kernel7l.img' to 0x8000 size 0x6b9738
006688.579: Device tree loaded to 0x2eff2d00 (size 0xd24f)
006698.576: gpioman: gpioman_get_pin_num: pin SDCARD_CONTROL_POWER not defined
010259.979: vchiq_core: vchiq_init_state: slot_zero = 0xdad80000, is_master = 1
dmesg log
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.15.84-v7l+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1613 SMP Thu Jan 5 12:01:26 GMT 2023
[ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.5
[ 0.000000] random: crng init done
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000001ac00000, size 320 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
[ 0.000000] Normal empty
[ 0.000000] HighMem [mem 0x0000000030000000-0x00000000fbffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff]
[ 0.000000] percpu: Embedded 16 pages/cpu s35788 r8192 d21556 u65536
[ 0.000000] pcpu-alloc: s35788 r8192 d21556 u65536 alloc=16*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1011008
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=m.m.m.m vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d1338895-02 rootfstype=ext4 fsck.repair=yes rootwait
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x0000000014890000-0x0000000018890000] (64MB)
[ 0.000000] Memory: 3601324K/4050944K available (10240K kernel code, 1386K rwdata, 3308K rodata, 2048K init, 591K bss, 121940K reserved, 327680K cma-reserved, 3264512K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 35518 entries in 105 pages
[ 0.000000] ftrace: allocated 105 pages with 4 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 25)
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000022] Switching to timer-based delay loop, resolution 18ns
[ 0.000382] Console: colour dummy device 80x30
[ 0.001049] printk: console [tty1] enabled
[ 0.001125] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000)
[ 0.001177] pid_max: default: 32768 minimum: 301
[ 0.001331] LSM: Security Framework initializing
[ 0.001543] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.001591] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.003134] cgroup: Disabling memory control group subsystem
[ 0.003388] CPU: Testing write buffer coherency: ok
[ 0.003459] CPU0: Spectre BHB: enabling loop workaround for all CPUs
[ 0.003914] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.005420] Setting up static identity map for 0x200000 - 0x20003c
[ 0.005636] rcu: Hierarchical SRCU implementation.
[ 0.006648] smp: Bringing up secondary CPUs ...
[ 0.007816] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.009121] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.010446] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.010609] smp: Brought up 1 node, 4 CPUs
[ 0.010689] SMP: Total of 4 processors activated (432.00 BogoMIPS).
[ 0.010721] CPU: All CPU(s) started in HYP mode.
[ 0.010746] CPU: Virtualization extensions available.
[ 0.011508] devtmpfs: initialized
[ 0.026457] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0
[ 0.026691] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.026747] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.036553] pinctrl core: initialized pinctrl subsystem
[ 0.037815] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.042286] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.043112] audit: initializing netlink subsys (disabled)
[ 0.043384] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1
[ 0.044027] thermal_sys: Registered thermal governor 'step_wise'
[ 0.044712] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.044769] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.045177] Serial: AMBA PL011 UART driver
[ 0.059179] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 0.100058] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-01-05T10:46:54, variant start
[ 0.110074] raspberrypi-firmware soc:firmware: Firmware hash is 8ba17717fbcedd4c3b6d4bce7e50c7af4155cba9
[ 0.169783] Kprobes globally optimized
[ 0.175781] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[ 0.180452] vgaarb: loaded
[ 0.180948] SCSI subsystem initialized
[ 0.181198] usbcore: registered new interface driver usbfs
[ 0.181274] usbcore: registered new interface driver hub
[ 0.181359] usbcore: registered new device driver usb
[ 0.181784] usb_phy_generic phy: supply vcc not found, using dummy regulator
[ 0.181993] usb_phy_generic phy: dummy supplies not allowed for exclusive requests
[ 0.182328] pps_core: LinuxPPS API ver. 1 registered
[ 0.182357] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 0.182406] PTP clock support registered
[ 0.184014] clocksource: Switched to clocksource arch_sys_counter
[ 0.264740] VFS: Disk quotas dquot_6.6.0
[ 0.264872] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.265073] FS-Cache: Loaded
[ 0.265291] CacheFiles: Loaded
[ 0.275798] NET: Registered PF_INET protocol family
[ 0.276064] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.277674] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.277731] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.277778] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.277861] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.277946] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.278113] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.278170] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.278444] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.284938] RPC: Registered named UNIX socket transport module.
[ 0.284972] RPC: Registered udp transport module.
[ 0.285000] RPC: Registered tcp transport module.
[ 0.285026] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.285063] PCI: CLS 0 bytes, default 64
[ 1.336026] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[ 1.338590] Initialise system trusted keyrings
[ 1.338901] workingset: timestamp_bits=14 max_order=20 bucket_order=6
[ 1.348078] zbud: loaded
[ 1.349973] FS-Cache: Netfs 'nfs' registered for caching
[ 1.350939] NFS: Registering the id_resolver key type
[ 1.350997] Key type id_resolver registered
[ 1.351025] Key type id_legacy registered
[ 1.351165] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.351197] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 1.352361] Key type asymmetric registered
[ 1.352392] Asymmetric key parser 'x509' registered
[ 1.352634] bounce: pool size: 64 pages
[ 1.352710] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.352959] io scheduler mq-deadline registered
[ 1.352990] io scheduler kyber registered
[ 1.362338] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 1.362403] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[ 1.362518] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[ 1.362631] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00ffffffff -> 0x0400000000
[ 1.446117] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[ 1.446539] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 1.446576] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.446612] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
[ 1.446724] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 1.446987] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 1.450659] PCI: bus0: Fast back to back transfers disabled
[ 1.450700] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.451096] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[ 1.451242] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 1.451693] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 1.455381] PCI: bus1: Fast back to back transfers disabled
[ 1.455417] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.455475] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[ 1.455517] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[ 1.455622] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.455661] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ 1.456096] pcieport 0000:00:00.0: enabling device (0140 -> 0142)
[ 1.456345] pcieport 0000:00:00.0: PME: Signaling with IRQ 77
[ 1.469901] iproc-rng200 fe104000.rng: hwrng registered
[ 1.470298] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 1.471893] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[ 1.484962] brd: module loaded
[ 1.495393] loop: module loaded
[ 1.496180] Loading iSCSI transport class v2.0-870.
[ 1.501387] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[ 1.594203] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[ 1.595428] usbcore: registered new interface driver r8152
[ 1.595527] usbcore: registered new interface driver lan78xx
[ 1.595604] usbcore: registered new interface driver smsc95xx
[ 1.643433] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.643487] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 1.649129] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0001e40000000890
[ 1.650225] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.650268] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 1.650313] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 1.650717] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 1.650761] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.650798] usb usb1: Product: xHCI Host Controller
[ 1.650828] usb usb1: Manufacturer: Linux 5.15.84-v7l+ xhci-hcd
[ 1.650858] usb usb1: SerialNumber: 0000:01:00.0
[ 1.651627] hub 1-0:1.0: USB hub found
[ 1.651713] hub 1-0:1.0: 1 port detected
[ 1.652725] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[ 1.652769] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.652806] usb usb2: Product: xHCI Host Controller
[ 1.652836] usb usb2: Manufacturer: Linux 5.15.84-v7l+ xhci-hcd
[ 1.652866] usb usb2: SerialNumber: 0000:01:00.0
[ 1.653608] hub 2-0:1.0: USB hub found
[ 1.653722] hub 2-0:1.0: 4 ports detected
[ 1.655648] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.656018] dwc_otg: FIQ enabled
[ 1.656033] dwc_otg: NAK holdoff enabled
[ 1.656046] dwc_otg: FIQ split-transaction FSM enabled
[ 1.656063] Module dwc_common_port init
[ 1.656518] usbcore: registered new interface driver uas
[ 1.656647] usbcore: registered new interface driver usb-storage
[ 1.656886] mousedev: PS/2 mouse device common for all mice
[ 1.662602] sdhci: Secure Digital Host Controller Interface driver
[ 1.662637] sdhci: Copyright(c) Pierre Ossman
[ 1.663364] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.667196] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.667547] hid: raw HID events driver (C) Jiri Kosina
[ 1.667755] usbcore: registered new interface driver usbhid
[ 1.667786] usbhid: USB HID core driver
[ 1.674349] Initializing XFRM netlink socket
[ 1.674414] NET: Registered PF_PACKET protocol family
[ 1.674550] Key type dns_resolver registered
[ 1.674938] Registering SWP/SWPB emulation handler
[ 1.675757] registered taskstats version 1
[ 1.675807] Loading compiled-in X.509 certificates
[ 1.676671] Key type .fscrypt registered
[ 1.676703] Key type fscrypt-provisioning registered
[ 1.689105] uart-pl011 fe201000.serial: there is not valid maps for state default
[ 1.689467] uart-pl011 fe201000.serial: cts_event_workaround enabled
[ 1.689619] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 34, base_baud = 0) is a PL011 rev2
[ 1.698937] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 1.699444] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 1.700754] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 1.700793] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[ 1.729856] of_cfs_init
[ 1.730101] of_cfs_init: OK
[ 1.766386] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
[ 1.766808] Waiting for root device PARTUUID=d1338895-02...
[ 1.821661] mmc1: new high speed SDIO card at address 0001
[ 1.874120] mmc0: new ultra high speed DDR50 SDHC card at address 0001
[ 1.875099] mmcblk0: mmc0:0001 SD 29.2 GiB
[ 1.878783] mmcblk0: p1 p2
[ 1.879347] mmcblk0: mmc0:0001 SD 29.2 GiB
[ 1.899086] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 1.899199] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 1.904906] devtmpfs: mounted
[ 1.915873] Freeing unused kernel image (initmem) memory: 2048K
[ 1.934075] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 1.934391] Run /sbin/init as init process
[ 1.934422] with arguments:
[ 1.934435] /sbin/init
[ 1.934448] with environment:
[ 1.934460] HOME=/
[ 1.934473] TERM=linux
[ 2.116718] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[ 2.116777] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.116813] usb 1-1: Product: USB2.0 Hub
[ 2.118958] hub 1-1:1.0: USB hub found
[ 2.119255] hub 1-1:1.0: 4 ports detected
[ 2.302231] systemd[1]: System time before build time, advancing clock.
[ 2.514506] NET: Registered PF_INET6 protocol family
[ 2.516226] Segment Routing with IPv6
[ 2.516286] In-situ OAM (IOAM) with IPv6
[ 2.587476] systemd[1]: systemd 247.3-7+rpi1+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 2.588423] systemd[1]: Detected architecture arm.
[ 2.606909] systemd[1]: Set hostname to .
[ 3.471710] systemd[1]: Queued start job for default target Multi-User System.
[ 3.477213] systemd[1]: Created slice system-getty.slice.
[ 3.478899] systemd[1]: Created slice system-modprobe.slice.
[ 3.480274] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.481456] systemd[1]: Created slice User and Session Slice.
[ 3.482244] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.483059] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.484629] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.485227] systemd[1]: Reached target Local Encrypted Volumes.
[ 3.485832] systemd[1]: Reached target Paths.
[ 3.486348] systemd[1]: Reached target Slices.
[ 3.486874] systemd[1]: Reached target Swap.
[ 3.491063] systemd[1]: Listening on Syslog Socket.
[ 3.492180] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 3.492926] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 3.494568] systemd[1]: Listening on Journal Audit Socket.
[ 3.495719] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.497006] systemd[1]: Listening on Journal Socket.
[ 3.506598] systemd[1]: Listening on udev Control Socket.
[ 3.507811] systemd[1]: Listening on udev Kernel Socket.
[ 3.509048] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[ 3.514603] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.521366] systemd[1]: Mounting RPC Pipe File System...
[ 3.529130] systemd[1]: Mounting Kernel Debug File System...
[ 3.536765] systemd[1]: Mounting Kernel Trace File System...
[ 3.537968] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 3.546923] systemd[1]: Starting Restore / save the current clock...
[ 3.556793] systemd[1]: Starting Set the console keyboard layout...
[ 3.571496] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 3.579982] systemd[1]: Starting Load Kernel Module configfs...
[ 3.588306] systemd[1]: Starting Load Kernel Module drm...
[ 3.596034] systemd[1]: Starting Load Kernel Module fuse...
[ 3.605518] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 3.612670] systemd[1]: Starting File System Check on Root Device...
[ 3.628425] systemd[1]: Starting Journal Service...
[ 3.648258] systemd[1]: Starting Load Kernel Modules...
[ 3.656171] systemd[1]: Starting Coldplug All udev Devices...
[ 3.684873] fuse: init (API version 7.34)
[ 3.699324] systemd[1]: Mounted POSIX Message Queue File System.
[ 3.700377] systemd[1]: Mounted RPC Pipe File System.
[ 3.701364] systemd[1]: Mounted Kernel Debug File System.
[ 3.702326] systemd[1]: Mounted Kernel Trace File System.
[ 3.714894] systemd[1]: Finished Restore / save the current clock.
[ 3.718154] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 3.720400] systemd[1]: modprobe@configfs.service: Succeeded.
[ 3.721966] systemd[1]: Finished Load Kernel Module configfs.
[ 3.731188] systemd[1]: modprobe@fuse.service: Succeeded.
[ 3.733496] systemd[1]: Finished Load Kernel Module fuse.
[ 3.736506] systemd[1]: Finished Load Kernel Modules.
[ 3.745415] systemd[1]: Mounting FUSE Control File System...
[ 3.753724] systemd[1]: Mounting Kernel Configuration File System...
[ 3.761089] systemd[1]: Started File System Check Daemon to report status.
[ 3.769035] systemd[1]: Starting Apply Kernel Variables...
[ 3.782236] systemd[1]: Mounted FUSE Control File System.
[ 3.808749] systemd[1]: Mounted Kernel Configuration File System.
[ 3.864450] systemd[1]: Finished Apply Kernel Variables.
[ 3.869932] systemd[1]: modprobe@drm.service: Succeeded.
[ 3.871452] systemd[1]: Finished Load Kernel Module drm.
[ 3.938501] systemd[1]: Finished File System Check on Root Device.
[ 3.945488] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.996548] systemd[1]: Started Journal Service.
[ 4.126190] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none.
[ 4.197051] systemd-journald[140]: Received client request to flush runtime journal.
[ 4.209365] systemd-journald[140]: File /var/log/journal/3131a73d3a3a4c3f9c873466dd662888/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 5.476230] mc: Linux media interface: v0.10
[ 5.554184] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.556754] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 5.556788] [vc_sm_connected_init]: start
[ 5.574231] [vc_sm_connected_init]: installed successfully
[ 5.600621] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.626095] bcm2835_audio bcm2835_audio: card created with 8 channels
[ 5.709416] videodev: Linux video capture interface: v2.00
[ 5.885394] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.888650] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode
[ 5.937047] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode
[ 5.942464] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.985063] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.051939] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[ 6.108910] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.156653] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.159969] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[ 6.164226] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[ 6.165726] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[ 6.165765] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 6.165791] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 6.165813] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 6.165836] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 6.214507] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20
[ 6.230226] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 6.230278] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[ 6.236306] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21
[ 6.243491] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22
[ 6.244611] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23
[ 6.244648] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 6.244674] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 6.244697] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 6.244719] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 6.254066] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[ 6.254125] rpivid feb10000.codec: Device registered as /dev/video19
[ 6.284677] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 6.284765] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[ 6.379285] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ 6.379340] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[ 6.386524] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
[ 6.386574] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
[ 6.390159] bcm2835-codec bcm2835-codec: Device registered as /dev/video31
[ 6.390253] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image
[ 6.487547] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 6.530162] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 6.544879] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
[ 6.613754] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[ 6.671372] Registered IR keymap rc-cec
[ 6.672672] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0
[ 6.672915] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input0
[ 6.704271] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4])
[ 6.736290] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1
[ 6.749635] Registered IR keymap rc-cec
[ 6.749839] rc rc1: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1
[ 6.750077] input: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input1
[ 6.755731] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4])
[ 6.756331] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4])
[ 6.756852] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 6.757334] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 6.757810] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 6.758273] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 6.758751] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 6.791266] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0
[ 6.791876] vc4-drm gpu: [drm] Cannot find any crtc or sizes
[ 6.794845] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 6.854504] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 6.855553] usbcore: registered new interface driver brcmfmac
[ 7.156290] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 7.166630] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov 1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60
[ 8.042785] uart-pl011 fe201000.serial: no DMA platform data
[ 8.441783] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS
[ 8.580869] 8021q: 802.1Q VLAN Support v1.8
[ 9.002829] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[ 9.316884] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[ 9.318067] bcmgenet fd580000.ethernet eth0: Link is Down
[ 13.514925] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 13.514987] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 16.345196] Bluetooth: Core ver 2.22
[ 16.345271] NET: Registered PF_BLUETOOTH protocol family
[ 16.345277] Bluetooth: HCI device and connection manager initialized
[ 16.345637] Bluetooth: HCI socket layer initialized
[ 16.345647] Bluetooth: L2CAP socket layer initialized
[ 16.345665] Bluetooth: SCO socket layer initialized
[ 16.354704] Bluetooth: HCI UART driver ver 2.3
[ 16.354716] Bluetooth: HCI UART protocol H4 registered
[ 16.354761] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 16.354895] Bluetooth: HCI UART protocol Broadcom registered
[ 16.648149] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.648161] Bluetooth: BNEP filters: protocol multicast
[ 16.648178] Bluetooth: BNEP socket layer initialized
[ 16.662644] NET: Registered PF_ALG protocol family
[ 16.680133] cryptd: max_cpu_qlen set to 1000
[ 17.114126] vc4-drm gpu: [drm] Cannot find any crtc or sizes
[ 25.886727] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 31.834191] cam-dummy-reg: disabling
EEPROM
*** UPDATE AVAILABLE ***
BOOTLOADER: update available
CURRENT: Tue 26 Apr 10:24:28 UTC 2022 (1650968668)
LATEST: Wed 11 Jan 17:40:52 UTC 2023 (1673458852)
RELEASE: default (/lib/firmware/raspberrypi/bootloader/default)
Use raspi-config to change the release.
VL805_FW: Using bootloader EEPROM
VL805: up to date
CURRENT: 000138a1
LATEST: 000138a1
Logs
No response
Additional context
No response
The text was updated successfully, but these errors were encountered: