initial upload

upload flip_flop_with_3inputs_boolean

flip_flop_with_3inputs_boolean/flip_flop_with_3inputs_boolean.ino

@@ -0,0 +1,34 @@
+/*
+  Adjust our flip-flop, so that when pin 8 or 7 or 6 is HIGH
+  the flashing is fast
+ */
+
+int led = 13;           // set pin 13 LED variable name
+int newled = 5;         // add our second LED on pin 5
+int time_delay = 500;   // set time delay (mS) duration here
+
+void setup() {                
+  pinMode(led, OUTPUT);       // set up LED pin 13 as output
+  pinMode(newled, OUTPUT);    // set second LED pin 5 as output
+  pinMode(8, INPUT);          // set up pin 8 as an input
+  pinMode(7, INPUT);          // set up pin 7 as an input
+  pinMode(6, INPUT);          // set up pin 6 as an input
+}
+
+// the loop routine runs over and over again forever:
+void loop() {
+  // if any pin 6 or 7 or 8 is HIGH
+  if (digitalRead(6) || digitalRead(7) || digitalRead(8)) {
+    time_delay = 250;             // set delay to 250
+  }
+  else {
+    time_delay = 1000;
+  }
+  digitalWrite(led, HIGH);    // turn LED ON (HIGH is the voltage level)
+  digitalWrite(newled, LOW);  // turn newLED OFF (LOW is the voltage level)
+  delay(time_delay);          // wait for time_delay
+  digitalWrite(led, LOW);     // turn LED OFF by making the voltage LOW
+  digitalWrite(newled, HIGH); // turn LED ON by making the voltage HIGH
+  delay(time_delay);          // wait for time_delay
+}
+