Replies: 21 comments 14 replies
-
|
Hi there - yes it does read the barcode on DigiKey packaging, in order to import parts. At least, to my recollection that's supposed to be there. You can try scanning the barcode in the "Order Import" page, or by entering the Order# and selecting DigiKey as the supplier. It should then show you all the parts and give you the option to import. Do you have a DigiKey api key configured? |
Beta Was this translation helpful? Give feedback.
-
|
ok, tested this locally. Apologies, it would appear I have introduced a new bug with the v2.2 release (no surprise, I took a year off this project!). I will patch this immediately and put out a new release with it working properly. Look for a new release by the end of the day! |
Beta Was this translation helpful? Give feedback.
-
|
Tracking issue as #96 |
Beta Was this translation helpful? Give feedback.
-
|
This is now fixed in release https://github.com/replaysMike/Binner/releases/tag/v2.2.2 Let me know if you are still experiencing any issues |
Beta Was this translation helpful? Give feedback.
-
|
2.2.2 is not working for me. I get a localhost cannot connect error. To check I reinstalled 2.2.1 and it works as before. I am using win10. |
Beta Was this translation helpful? Give feedback.
-
|
yep. I had it reported by someone else in Issue #98 - v2.2.3 is building deploying right now and I'll delete v2.2.2 as a bad release. Apologies, there is no test pipeline on this project yet to prevent these kind of issues, but it's on the todo list! :-/ |
Beta Was this translation helpful? Give feedback.
-
|
v2.2.3 is now up - let me know if you still have any issues. |
Beta Was this translation helpful? Give feedback.
-
|
New problem. When I change the settings for the Integrations, they won’t save. I make changes, scroll to the bottom of the Settings page and click Save then leave and come back and nothing I entered is there. The “System Settings Were Saved” dialog pops up but no joy.
Tim.
From: Michael Brown ***@***.***>
Sent: Saturday, February 11, 2023 5:27 PM
To: replaysMike/Binner ***@***.***>
Cc: TWM617 ***@***.***>; Author ***@***.***>
Subject: Re: [replaysMike/Binner] Accessing barcodes generated by Digikey (Discussion #95)
v2.2.3 <https://github.com/replaysMike/Binner/releases/tag/v2.2.3> is now up - let me know if you still have any issues.
—
Reply to this email directly, view it on GitHub <#95 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AY2JAWIWCCHVMVTFV43JY3LWXA375ANCNFSM6AAAAAAUYMEARI> .
You are receiving this because you authored the thread. <https://github.com/notifications/beacon/AY2JAWJA2646I7FRQJYZ6GDWXA375A5CNFSM6AAAAAAUYMEARKWGG33NNVSW45C7OR4XAZNRIRUXGY3VONZWS33OINXW23LFNZ2KUY3PNVWWK3TUL5UWJTQAJN5P2.gif> Message ID: ***@***.*** ***@***.***> >
|
Beta Was this translation helpful? Give feedback.
-
|
I see the issue. It's failing to show validation errors in the UI. For the moment until I patch this shortly, it should work if you fill out the color field for each of the printer lines. Looks like it's not allowing empty values, but a value such as #000000 should work.
Seems there is still quite a lot of QA work to do since we back-ported the binner.io implementation to the open source version. |
Beta Was this translation helpful? Give feedback.
-
|
Thanks, my changes to Settings are now saved. However, I still am having no luck with Digikey barcode scanning. Maybe I don’t understand how it is supposed to work? Here are the steps that I am taking:
1. Verified that Port 8090 is open on my network
2. Set Port Forwarding to my PC’s IP address
3. In Binner: Disable Swarm Support since I only want to search Digikey.
4. Enable Digikey Support
5. Provide the Client Key for the Binner production app I registered in my user account
6. Provide the Client Secret for the Binner production app
7. Copied the callback URL that Digikey provided into Binner.
8. Saved Settings
9. Clicked Add Inventory
10. Clicked the Bulk Scan button
11. Scanned Barcode from a Digikey IC package
12. Binner waits with nonstop swirlie
What am I missing?
Thanks, Tim
From: Michael Brown ***@***.***>
Sent: Saturday, February 11, 2023 8:54 PM
To: replaysMike/Binner ***@***.***>
Cc: TWM617 ***@***.***>; Author ***@***.***>
Subject: Re: [replaysMike/Binner] Accessing barcodes generated by Digikey (Discussion #95)
I see the issue. It's failing to show validation errors in the UI. For the moment until I patch this shortly, it should work if you fill out the color field for each of the printer lines. Looks like it's not allowing empty values, but a value such as #000000 should work.
<https://user-images.githubusercontent.com/2531058/218293584-3bc3a9b9-6e6c-4728-ade6-dd752361bd49.png>
Seems there is still quite a lot of QA work to do since we back-ported the binner.io <https://binner.io> implementation to the open source version.
—
Reply to this email directly, view it on GitHub <#95 (reply in thread)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AY2JAWME76LGZ3DX2ELU7HTWXBUE7ANCNFSM6AAAAAAUYMEARI> .
You are receiving this because you authored the thread. <https://github.com/notifications/beacon/AY2JAWLCZODHEMEMWJBGYCDWXBUE7A5CNFSM6AAAAAAUYMEARKWGG33NNVSW45C7OR4XAZNRIRUXGY3VONZWS33OINXW23LFNZ2KUY3PNVWWK3TUL5UWJTQAJN6RE.gif> Message ID: ***@***.*** ***@***.***> >
|
Beta Was this translation helpful? Give feedback.
-
|
Update: It appears to be a firewall issue. After I shutoff my firewall, I did get an error message back from Digikey. I need to spend sometime to figure what is causing it but at least the connection is working.
Regards, Tim.
From: ***@***.*** ***@***.***>
Sent: Sunday, February 12, 2023 9:22 AM
To: 'replaysMike/Binner' ***@***.***>; 'replaysMike/Binner' ***@***.***>
Cc: 'Author' ***@***.***>
Subject: RE: [replaysMike/Binner] Accessing barcodes generated by Digikey (Discussion #95)
Thanks, my changes to Settings are now saved. However, I still am having no luck with Digikey barcode scanning. Maybe I don’t understand how it is supposed to work? Here are the steps that I am taking:
1. Verified that Port 8090 is open on my network
2. Set Port Forwarding to my PC’s IP address
3. In Binner: Disable Swarm Support since I only want to search Digikey.
4. Enable Digikey Support
5. Provide the Client Key for the Binner production app I registered in my user account
6. Provide the Client Secret for the Binner production app
7. Copied the callback URL that Digikey provided into Binner.
8. Saved Settings
9. Clicked Add Inventory
10. Clicked the Bulk Scan button
11. Scanned Barcode from a Digikey IC package
12. Binner waits with nonstop swirlie
What am I missing?
Thanks, Tim
From: Michael Brown ***@***.*** ***@***.***> >
Sent: Saturday, February 11, 2023 8:54 PM
To: replaysMike/Binner ***@***.*** ***@***.***> >
Cc: TWM617 ***@***.*** ***@***.***> >; Author ***@***.*** ***@***.***> >
Subject: Re: [replaysMike/Binner] Accessing barcodes generated by Digikey (Discussion #95)
I see the issue. It's failing to show validation errors in the UI. For the moment until I patch this shortly, it should work if you fill out the color field for each of the printer lines. Looks like it's not allowing empty values, but a value such as #000000 should work.
<https://user-images.githubusercontent.com/2531058/218293584-3bc3a9b9-6e6c-4728-ade6-dd752361bd49.png>
Seems there is still quite a lot of QA work to do since we back-ported the binner.io <https://binner.io> implementation to the open source version.
—
Reply to this email directly, view it on GitHub <#95 (reply in thread)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AY2JAWME76LGZ3DX2ELU7HTWXBUE7ANCNFSM6AAAAAAUYMEARI> .
You are receiving this because you authored the thread. <https://github.com/notifications/beacon/AY2JAWLCZODHEMEMWJBGYCDWXBUE7A5CNFSM6AAAAAAUYMEARKWGG33NNVSW45C7OR4XAZNRIRUXGY3VONZWS33OINXW23LFNZ2KUY3PNVWWK3TUL5UWJTQAJN6RE.gif> Message ID: ***@***.*** ***@***.***> >
|
Beta Was this translation helpful? Give feedback.
-
|
Update: I am getting an “invalid Client ID” error message from Digikey. I verified the ID I entered in Binner matches the ID provided by Digikey. I don’t think I have any way to troubleshoot this.
Tim.
From: ***@***.*** ***@***.***>
Sent: Sunday, February 12, 2023 10:14 AM
To: 'replaysMike/Binner' ***@***.***>; 'replaysMike/Binner' ***@***.***>
Cc: 'Author' ***@***.***>
Subject: RE: [replaysMike/Binner] Accessing barcodes generated by Digikey (Discussion #95)
Update: It appears to be a firewall issue. After I shutoff my firewall, I did get an error message back from Digikey. I need to spend sometime to figure what is causing it but at least the connection is working.
Regards, Tim.
From: ***@***.*** ***@***.***> ***@***.*** ***@***.***> >
Sent: Sunday, February 12, 2023 9:22 AM
To: 'replaysMike/Binner' ***@***.*** ***@***.***> >; 'replaysMike/Binner' ***@***.*** ***@***.***> >
Cc: 'Author' ***@***.*** ***@***.***> >
Subject: RE: [replaysMike/Binner] Accessing barcodes generated by Digikey (Discussion #95)
Thanks, my changes to Settings are now saved. However, I still am having no luck with Digikey barcode scanning. Maybe I don’t understand how it is supposed to work? Here are the steps that I am taking:
1. Verified that Port 8090 is open on my network
2. Set Port Forwarding to my PC’s IP address
3. In Binner: Disable Swarm Support since I only want to search Digikey.
4. Enable Digikey Support
5. Provide the Client Key for the Binner production app I registered in my user account
6. Provide the Client Secret for the Binner production app
7. Copied the callback URL that Digikey provided into Binner.
8. Saved Settings
9. Clicked Add Inventory
10. Clicked the Bulk Scan button
11. Scanned Barcode from a Digikey IC package
12. Binner waits with nonstop swirlie
What am I missing?
Thanks, Tim
From: Michael Brown ***@***.*** ***@***.***> >
Sent: Saturday, February 11, 2023 8:54 PM
To: replaysMike/Binner ***@***.*** ***@***.***> >
Cc: TWM617 ***@***.*** ***@***.***> >; Author ***@***.*** ***@***.***> >
Subject: Re: [replaysMike/Binner] Accessing barcodes generated by Digikey (Discussion #95)
I see the issue. It's failing to show validation errors in the UI. For the moment until I patch this shortly, it should work if you fill out the color field for each of the printer lines. Looks like it's not allowing empty values, but a value such as #000000 should work.
<https://user-images.githubusercontent.com/2531058/218293584-3bc3a9b9-6e6c-4728-ade6-dd752361bd49.png>
Seems there is still quite a lot of QA work to do since we back-ported the binner.io <https://binner.io> implementation to the open source version.
—
Reply to this email directly, view it on GitHub <#95 (reply in thread)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AY2JAWME76LGZ3DX2ELU7HTWXBUE7ANCNFSM6AAAAAAUYMEARI> .
You are receiving this because you authored the thread. <https://github.com/notifications/beacon/AY2JAWLCZODHEMEMWJBGYCDWXBUE7A5CNFSM6AAAAAAUYMEARKWGG33NNVSW45C7OR4XAZNRIRUXGY3VONZWS33OINXW23LFNZ2KUY3PNVWWK3TUL5UWJTQAJN6RE.gif> Message ID: ***@***.*** ***@***.***> >
|
Beta Was this translation helpful? Give feedback.
-
|
After a bit more debugging, I found I had copy and pasted a leading space for both the ClientID and the Client Secret. Once those were removed I scanned a barcode and I get a error: Invalid redirection uri (my public ip):8090/Authorization/Authorize.
Tim.
|
Beta Was this translation helpful? Give feedback.
-
|
Hi Tim - good to see you made some progress. Yes DigiKey’s system is a little difficult if you aren’t experienced with API’s and perhaps I can document it a bit better. the postback url is usually set as localhost, when you have successfully authorized them they post a token to Binner telling it how to access DigiKey. You would want it set to the default that was there originally. You shouldn’t need any firewall settings as it’s all done by JavaScript in the browser, and not posted directly to the backend api. The ClientId and Client secret have to be exactly as DigiKey provides it. Also, you have to enter the postback url on DigiKey’s side exactly as it was in the config - this tells them what to contact after the api keys are validated. Let me know if you are still having difficulty and I can help diagnose (not at my pc at the moment) |
Beta Was this translation helpful? Give feedback.
-
|
Not sure if you saw the wiki on this topic or not, but it’s at https://github.com/replaysMike/Binner/wiki/Configuring-API-Integrations#configuring-digikey-api |
Beta Was this translation helpful? Give feedback.
-
|
No I hadn’t seen the wiki but I am reviewing it now.
FYI – When you hover over the Postback URL, the help message occurs conflicts with what the wiki says.
Tim.
From: Michael Brown ***@***.***>
Sent: Sunday, February 12, 2023 5:25 PM
To: replaysMike/Binner ***@***.***>
Cc: TWM617 ***@***.***>; Author ***@***.***>
Subject: Re: [replaysMike/Binner] Accessing barcodes generated by Digikey (Discussion #95)
Not sure if you saw the wiki on this topic or not, but it’s at https://github.com/replaysMike/Binner/wiki/Configuring-API-Integrations#configuring-digikey-api
—
Reply to this email directly, view it on GitHub <#95 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AY2JAWK7TRXR3WEFZNJDGZTWXGEQBANCNFSM6AAAAAAUYMEARI> .
You are receiving this because you authored the thread. <https://github.com/notifications/beacon/AY2JAWLD7RLUQVXINAFMLSTWXGEQBA5CNFSM6AAAAAAUYMEARKWGG33NNVSW45C7OR4XAZNRIRUXGY3VONZWS33OINXW23LFNZ2KUY3PNVWWK3TUL5UWJTQAJOIMK.gif> Message ID: ***@***.*** ***@***.***> >
|
Beta Was this translation helpful? Give feedback.
-
|
I really, really want to use this software but I cannot make it work. I read the wiki, edited the json files (appsettings and appsettings.Production). I set "https://localhost:8090/Authorization/Authorize” for my url, both in Binner and on the Digikey API site.
I have run out of things to try. I am not internet app savvy but I am no fool and will continue to try if you are willing to stick with me.
Regards, Tim.
From: ***@***.*** ***@***.***>
Sent: Monday, February 13, 2023 8:12 AM
To: 'replaysMike/Binner' ***@***.***>; 'replaysMike/Binner' ***@***.***>
Cc: 'Author' ***@***.***>
Subject: RE: [replaysMike/Binner] Accessing barcodes generated by Digikey (Discussion #95)
No I hadn’t seen the wiki but I am reviewing it now.
FYI – When you hover over the Postback URL, the help message occurs conflicts with what the wiki says.
Tim.
From: Michael Brown ***@***.***>
Sent: Sunday, February 12, 2023 5:25 PM
To: replaysMike/Binner ***@***.*** ***@***.***> >
Cc: TWM617 ***@***.*** ***@***.***> >; Author ***@***.*** ***@***.***> >
Subject: Re: [replaysMike/Binner] Accessing barcodes generated by Digikey (Discussion #95)
Not sure if you saw the wiki on this topic or not, but it’s at https://github.com/replaysMike/Binner/wiki/Configuring-API-Integrations#configuring-digikey-api
—
Reply to this email directly, <#95 (comment)> view it on GitHub, or <https://github.com/notifications/unsubscribe-auth/AY2JAWK7TRXR3WEFZNJDGZTWXGEQBANCNFSM6AAAAAAUYMEARI> unsubscribe.
You are receiving this because you authored the thread. <https://github.com/notifications/beacon/AY2JAWLD7RLUQVXINAFMLSTWXGEQBA5CNFSM6AAAAAAUYMEARKWGG33NNVSW45C7OR4XAZNRIRUXGY3VONZWS33OINXW23LFNZ2KUY3PNVWWK3TUL5UWJTQAJOIMK.gif> Message ID: < ***@***.***> ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Not a problem Tim, I'd love to see you get things working too. Maybe we should start with you sharing the contents of your {
"WebHostServiceConfiguration": {
// Development,Production
"Environment": "Production",
"Name": "Binner Server",
"IP": "*",
"PublicUrl": "",
"Port": 8090,
// caching configuration
"MaxCacheItems": 1024,
"CacheSlidingExpirationMinutes": 30,
"CacheAbsoluteExpirationMinutes": 0,
"Integrations": {
"Swarm": {
"Enabled": true,
// Binner Swarm Api keys can be obtained at https://binner.io/swarm
// This is optional, by using a registered key you can obtain a higher request limit.
"ApiKey": "",
// Binner Swarm Api Url
"ApiUrl": "https://swarm.binner.io"
},
"Octopart": {
"Enabled": false,
// Octopart API Keys can be obtained at https://octopart.com/api/home
"ApiKey": "",
// Octopart Api Url
"ApiUrl": "https://octopart.com"
},
"Digikey": {
"Enabled": true,
// Digikey API Keys can be obtained at https://developer.digikey.com/
"ClientId": "QFw33ljaGjymhgAhos55CjxJ8rtdIzcCr",
"ClientSecret": "GB9MGMTYb8DguIHKUJ4",
// The oAuth Postback Url - this must match the Callback Url for the App you configured on Digikey's API
"oAuthPostbackUrl": "https://localhost:8090/Authorization/Authorize",
// Digikey Api Url using either https://sandbox-api.digikey.com, https://api.digikey.com
"ApiUrl": "https://api.digikey.com"
},
"Mouser": {
"Enabled": false,
// Mouser API Keys can be obtained at https://www.mouser.com/api-hub/
"ApiKeys": {
"SearchApiKey": "",
"OrderApiKey": "",
"CartApiKey": ""
},
// Mouser Api Url
"ApiUrl": "https://api.mouser.com"
},
// AliExpress API is not currently supported
"AliExpress": {
"Enabled": false,
"ApiKey": "",
// The oAuth Postback Url - this must match the Callback Url for the App you configured on AliExpress API
"oAuthPostbackUrl": "https://localhost:8090/Authorization/Authorize",
// AliExpress Api Url
"ApiUrl": "https://api.aliexpress.com"
}
},
"PrinterConfiguration": {
// DYMO LabelWriter 450, DYMO LabelWriter 450 Twin Turbo
"PrinterName": "DYMO LabelWriter 450 Twin Turbo",
// Auto or Left, Right for DYMO LabelWriter 450 Twin Turbo
"PartLabelSource": "Right",
// Label name, such as 30346 or 30277)
"PartLabelName": "30346",
"PartLabelTemplate": {
"Line1": {
"label": 1,
"content": "{partNumber}",
"fontName": "Segoe UI",
"fontSize": 16,
"autoSize": true,
"upperCase": true
},
"Line2": {
"label": 1,
"content": "{description}",
"fontName": "Roboto Mono",
"fontSize": 6
},
// description line 2 will be automatically wrapped from line 1
"Line3": {
"label": 1,
"content": "{description}",
"fontName": "Roboto Mono",
"fontSize": 6
},
"Line4": {
"label": 1,
"content": "{partNumber}",
"barcode": true
},
"Identifier": {
"label": 1,
"content": "{binNumber}",
"fontName": "Source Code Pro",
"fontSize": 10,
"color": "#ee0000",
"rotate": 90,
"position": "left",
"upperCase": true,
"margin": {
"top": 25
}
},
"Identifier2": {
"label": 1,
"content": "{binNumber2}",
"fontName": "Source Code Pro",
"fontSize": 10,
"color": "#ee0000",
"rotate": 90,
"position": "right",
"upperCase": true,
"margin": {
"top": 25,
"left": 20
}
}
},
"LabelDefinitions": [
{
"MediaSize": {
"ModelName": "30277",
"Name": "File Folder (2 up)",
"DriverName": "w82h248",
"ExtraData": "",
"Width": 82,
"Height": 248
},
"TopMargin": -20,
"LeftMargin": 0,
"LabelCount": 2,
"TotalLines": 2
},
{
"MediaSize": {
"ModelName": "30346",
"Name": "1/2 in x 1-7/8 in",
"DriverName": "w36h136",
"ExtraData": "",
"Width": 36,
"Height": 136
},
"TopMargin": -20,
"LeftMargin": 0,
"LabelCount": 1,
"TotalLines": 2
},
{
"MediaSize": {
"ModelName": "30252",
"Name": "Address",
"DriverName": "w79h252",
"ExtraData": "",
"Width": 79,
"Height": 252
},
"TopMargin": -20,
"LeftMargin": 0,
"LabelCount": 1,
"TotalLines": 4
},
{
"MediaSize": {
"ModelName": "30327",
"Name": "File Folder",
"DriverName": "w57h248",
"ExtraData": "",
"Width": 57,
"Height": 286
},
"TopMargin": -20,
"LeftMargin": 0,
"LabelCount": 1,
"TotalLines": 4
}
]
}
},
"StorageProviderConfiguration": {
// Provider options: Binner, SqlServer, Postgresql, MySql, Sqlite
"Provider": "Binner",
"ProviderConfiguration": {
"Filename": "C:\\Binner\\binner.db" // Binner provider
//"ConnectionString": "Server=localhost;Database=Binner;Trusted_Connection=True;TrustServerCertificate=True;Integrated Security=True;" // SqlServer provider
//"ConnectionString": "Server=localhost;Port=5432;Database=Binner;Userid=postgres;Password=password;SslMode=Disable;Persist Security Info=true;" // Postgresql provider
//"ConnectionString": "Data Source=C:\\Binner\\binner_sqlite.db; Version=3; Pooling=True; Max Pool Size=100;" // Sqlite provider
//"ConnectionString": "Server=localhost;Database=Binner;Uid=root;Pwd=password;" // MySql provider
},
// the path to store user uploaded files to
"UserUploadedFilesPath": "C:\\Binner\\UserFiles"
},
"Logging": {
"LogLevel": {
"Default": "Trace",
"Microsoft": "Error"
}
}
}If I login at developer.digikey.com and look at my
You can see there I have a Client ID & Secret, the value of my Callback URL, and I have 3 API's enabled (Product Information, Barcode & OrderSupport). Note that the Callback URL is https:// and not http:// |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
One thing to try first is on the Order Import page to try entering an Order # manually (without the barcode scanner) and see if you get a list of parts show up. As an example, here's one of mine:
And on Digikey where I got the order number from:
I'm going to dust off my barcode scanner and try it on various pages to see what is supported. I wrote that stuff 2 years ago and haven't touched it since ;) |
Beta Was this translation helpful? Give feedback.
-
|
I get the error message “Api is not enabled”
From: Michael Brown ***@***.***>
Sent: Monday, February 13, 2023 2:59 PM
To: replaysMike/Binner ***@***.***>
Cc: TWM617 ***@***.***>; Author ***@***.***>
Subject: Re: [replaysMike/Binner] Accessing barcodes generated by Digikey (Discussion #95)
One thing to try first is on the Order Import page to try entering an Order # manually (without the barcode scanner) and see if you get a list of parts show up. As an example, here's one of mine:
<https://user-images.githubusercontent.com/2531058/218593069-f7ee629c-f3ab-4cb5-82f9-c2ed2706cbfe.png>
And on Digikey where I got the order number from:
<https://user-images.githubusercontent.com/2531058/218593386-847cf8f5-974f-47a6-9386-3cc3f2bec120.png>
I'm going to dust off my barcode scanner and try it on various pages to see what is supported. I wrote that stuff 2 years ago and haven't touched it since ;)
—
Reply to this email directly, view it on GitHub <#95 (reply in thread)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AY2JAWP4OYN7TUIKVAYWMQDWXK4D5ANCNFSM6AAAAAAUYMEARI> .
You are receiving this because you authored the thread. <https://github.com/notifications/beacon/AY2JAWJJF44IFGIOOO7APMDWXK4D5A5CNFSM6AAAAAAUYMEARKWGG33NNVSW45C7OR4XAZNRIRUXGY3VONZWS33OINXW23LFNZ2KUY3PNVWWK3TUL5UWJTQAJO75U.gif> Message ID: ***@***.*** ***@***.***> >
|
Beta Was this translation helpful? Give feedback.
-
|
that's weird - and your config is set:
|
Beta Was this translation helpful? Give feedback.
-
|
Yes
From: Michael Brown ***@***.***>
Sent: Monday, February 13, 2023 4:06 PM
To: replaysMike/Binner ***@***.***>
Cc: TWM617 ***@***.***>; Author ***@***.***>
Subject: Re: [replaysMike/Binner] Accessing barcodes generated by Digikey (Discussion #95)
that's weird - and your config is set:
"Digikey": { "Enabled": true,?
—
Reply to this email directly, view it on GitHub <#95 (reply in thread)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AY2JAWKHEY5USUJ5SWPRGETWXLD75ANCNFSM6AAAAAAUYMEARI> .
You are receiving this because you authored the thread. <https://github.com/notifications/beacon/AY2JAWLPENSN3IJSPDZIZ4TWXLD75A5CNFSM6AAAAAAUYMEARKWGG33NNVSW45C7OR4XAZNRIRUXGY3VONZWS33OINXW23LFNZ2KUY3PNVWWK3TUL5UWJTQAJPBDS.gif> Message ID: ***@***.*** ***@***.***> >
|
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
This should be ok, as changing settings overwrites the entire |
Beta Was this translation helpful? Give feedback.
-
|
I'm still running out of ideas as to what could be wrong, I don't understand how it could say the DigiKey api is disabled if it's enabled in your appsettings.json file. I assume you're running latest Binner v2.2.3 but I'm going to poke around and see if I can find anything weird |
Beta Was this translation helpful? Give feedback.
-
|
If you like and are comfortable with it, one thing we can try is sharing your screen/computer via RDP or VNC and I can try to determine what the issue is. I tried a clean install on my own machine, disabled the swarm api, put in my api keys for DigiKey and it just worked for me. |
Beta Was this translation helpful? Give feedback.
-
|
Yes Michael, that would be great. It will have to be tomorrow for me. Is there a time that works for you?
Tim
…________________________________
From: Michael Brown ***@***.***>
Sent: Monday, February 13, 2023 5:19:17 PM
To: replaysMike/Binner ***@***.***>
Cc: TWM617 ***@***.***>; Author ***@***.***>
Subject: Re: [replaysMike/Binner] Accessing barcodes generated by Digikey (Discussion #95)
If you like and are comfortable with it, one thing we can try is sharing your screen/computer via RDP or VNC and I can try to determine what the issue is. I tried a clean install on my own machine, disabled the swarm api, put in my api keys for DigiKey and it just worked for me.
—
Reply to this email directly, view it on GitHub<#95 (reply in thread)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AY2JAWM42UZOYOP2FD76SK3WXLMRLANCNFSM6AAAAAAUYMEARI>.
You are receiving this because you authored the thread.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
I'm in Vancouver, so PST. I have to drive my wife to the airport in the morning, I should be back home by 11am or so and my day is open after that. |
Beta Was this translation helpful? Give feedback.
-
|
I am just west of Portland, OR so PST also. How about 1 PM?
Tim
…________________________________
From: Michael Brown ***@***.***>
Sent: Monday, February 13, 2023 5:49:31 PM
To: replaysMike/Binner ***@***.***>
Cc: TWM617 ***@***.***>; Author ***@***.***>
Subject: Re: [replaysMike/Binner] Accessing barcodes generated by Digikey (Discussion #95)
I'm in Vancouver, so PST. I have to drive my wife to the airport in the morning, I should be back home by 11am or so and my day is open after that.
—
Reply to this email directly, view it on GitHub<#95 (reply in thread)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AY2JAWM77JI4TBEHKYL64Z3WXLQCXANCNFSM6AAAAAAUYMEARI>.
You are receiving this because you authored the thread.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
closing the zoom meeting for now, just ping me if you still want help with your installation |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
oh haha, not a problem. I don't have your phone number, otherwise we could do that as well but then I can't see your screen |
Beta Was this translation helpful? Give feedback.
-
|
actually, we can do phone call if you want for the audio, but zoom for screen sharing if you want. Zoom has chat too, so it doesn't have to be a voice call |
Beta Was this translation helpful? Give feedback.
-
I am new to your software and I was hoping it could read the barcode on Digikey packaging then use that to access their data and return that to Binner. and then populate the DB. It doesn't seem that is how it works -- or at least I can't seem to make it work that way.
Beta Was this translation helpful? Give feedback.
All reactions