Skip to content

Commit

Permalink
Resync with mainline
Browse files Browse the repository at this point in the history 
p4raw-id: //depot/vmsperl@5049
p4raw-branched: from //depot/perl@4822 'branch in'
	ext/Sys/Syslog/Makefile.PL ext/Sys/Syslog/Syslog.pm
	lib/Pod/Find.pm lib/Pod/ParseUtils.pm t/op/exists_sub.t
	t/op/ver.t t/pragma/diagnostics.t win32/bin/exetype.pl
	vos/config.def vos/config.pl (@4896..) pod/perlintern.pod
	(@4915..) ext/Sys/Syslog/Syslog.xs (@4980..)
	pod/perlunicode.pod (@5013..) pod/perlapi.pod (@5015..)
	Todo-5.6 (@5027..)
p4raw-deleted: from //depot/perl@4822 'delete in' lib/Sys/Syslog.pm
	(@2406..) Todo-5.005 (@4008..) lib/caller.pm (@4860..)
p4raw-edited: from //depot/perl@4822 'edit in' vms/subconfigure.com
	(@4767..)
p4raw-integrated: from //depot/perl@4822 'copy in' hints/unicosmk.sh
	(@948..) lib/FileHandle.pm (@1044..) lib/ExtUtils/Packlist.pm
	(@1315..) ext/IPC/SysV/SysV.pm (@1372..) lib/Net/protoent.pm
	lib/Net/servent.pm lib/Text/Soundex.pm (@1575..) README.vos
	vos/Changes vos/build.cm vos/compile_perl.cm vos/perl.bind
	vos/test_vos_dummies.c vos/vos_dummies.c (@1838..)
	lib/utf8_heavy.pl (@2039..) ext/IO/lib/IO/Seekable.pm
	lib/ExtUtils/Command.pm lib/Net/hostent.pm lib/Net/netent.pm
	lib/Time/gmtime.pm lib/Time/localtime.pm lib/User/grent.pm
	lib/User/pwent.pm (@2620..) eg/cgi/index.html lib/CGI/Apache.pm
	lib/CGI/Switch.pm (@2830..) ext/IO/lib/IO/Dir.pm
	ext/IO/lib/IO/Pipe.pm ext/IO/lib/IO/Poll.pm
	ext/IO/lib/IO/Socket/UNIX.pm (@2882..) t/comp/use.t (@2891..)
	lib/File/Compare.pm (@3061..) form.h (@3124..) hints/netbsd.sh
	(@3158..) t/op/grep.t (@3180..) lib/AnyDBM_File.pm (@3317..)
	lib/Test.pm (@3376..) lib/CPAN/Nox.pm (@3458..)
	hints/openbsd.sh (@3516..) mg.h (@3524..) lib/CGI/Cookie.pm
	lib/CGI/Pretty.pm (@3559..) lib/Text/ParseWords.pm (@3563..)
	ext/IO/lib/IO/File.pm lib/File/Basename.pm (@3650..)
	x2p/find2perl.PL (@3677..) cflags.SH (@3774..) utils/dprofpp.PL
	(@3778..) ext/IO/lib/IO/Handle.pm (@3825..) lib/CGI.pm
	lib/dumpvar.pl (@3848..) README.cygwin
	lib/ExtUtils/MM_Cygwin.pm (@3852..) README.threads (@3860..)
	lib/SelfLoader.pm t/io/tell.t t/lib/cgi-html.t t/op/attrs.t
	(@4076..) ext/SDBM_File/sdbm/sdbm.c (@4082..)
	lib/Test/Harness.pm (@4092..) pod/perlcompile.pod (@4120..)
	ext/Opcode/Safe.pm (@4131..) ext/DB_File/Changes
	ext/DB_File/Makefile.PL ext/DB_File/version.c (@4142..)
	ext/DB_File/DB_File.xs (@4144..) lib/File/Spec/VMS.pm (@4182..)
	hints/dynixptx.sh (@4271..) t/lib/fields.t (@4303..) thrdvar.h
	(@4316..) pod/perlguts.pod (@4339..) Porting/makerel (@4391..)
	lib/Text/Tabs.pm (@4398..) perlio.c (@4402..)
	lib/CPAN/FirstTime.pm (@4416..) README (@4433..)
	lib/attributes.pm (@4438..) ext/Devel/Peek/Peek.xs (@4475..)
	Policy_sh.SH (@4496..) universal.c xsutils.c (@4511..)
	ext/B/B/Stash.pm ext/B/NOTES ext/B/O.pm keywords.h keywords.pl
	(@4515..) util.h (@4545..) ext/B/B/Asmdata.pm
	ext/B/B/Deparse.pm (@4546..) ext/Data/Dumper/Dumper.xs
	pod/perlmod.pod (@4556..) ext/IO/IO.xs lib/unicode/Is/ASCII.pl
	lib/unicode/Is/Alnum.pl lib/unicode/Is/Alpha.pl
	lib/unicode/Is/BidiAN.pl lib/unicode/Is/BidiB.pl
	lib/unicode/Is/BidiCS.pl lib/unicode/Is/BidiEN.pl
	lib/unicode/Is/BidiES.pl lib/unicode/Is/BidiET.pl
	lib/unicode/Is/BidiL.pl lib/unicode/Is/BidiON.pl
	lib/unicode/Is/BidiR.pl lib/unicode/Is/BidiS.pl
	lib/unicode/Is/BidiWS.pl lib/unicode/Is/C.pl
	lib/unicode/Is/Cc.pl lib/unicode/Is/Cn.pl
	lib/unicode/Is/Cntrl.pl lib/unicode/Is/Co.pl
	lib/unicode/Is/DCcircle.pl lib/unicode/Is/DCcompat.pl
	lib/unicode/Is/DCfinal.pl lib/unicode/Is/DCfont.pl
	lib/unicode/Is/DCinital.pl lib/unicode/Is/DCinitial.pl
	lib/unicode/Is/DCisolated.pl lib/unicode/Is/DCnarrow.pl
	lib/unicode/Is/DCnoBreak.pl lib/unicode/Is/DCsmall.pl
	lib/unicode/Is/DCsquare.pl lib/unicode/Is/DCsub.pl
	lib/unicode/Is/DCsuper.pl lib/unicode/Is/DCvertical.pl
	lib/unicode/Is/DCwide.pl lib/unicode/Is/DecoCanon.pl
	lib/unicode/Is/DecoCompat.pl lib/unicode/Is/Digit.pl
	lib/unicode/Is/Graph.pl lib/unicode/Is/L.pl
	lib/unicode/Is/Ll.pl lib/unicode/Is/Lm.pl lib/unicode/Is/Lo.pl
	lib/unicode/Is/Lower.pl lib/unicode/Is/Lt.pl
	lib/unicode/Is/Lu.pl lib/unicode/Is/M.pl lib/unicode/Is/Mc.pl
	lib/unicode/Is/Mirrored.pl lib/unicode/Is/Mn.pl
	lib/unicode/Is/N.pl lib/unicode/Is/Nd.pl lib/unicode/Is/No.pl
	lib/unicode/Is/P.pl lib/unicode/Is/Pd.pl lib/unicode/Is/Pe.pl
	lib/unicode/Is/Po.pl lib/unicode/Is/Print.pl
	lib/unicode/Is/Ps.pl lib/unicode/Is/Punct.pl
	lib/unicode/Is/S.pl lib/unicode/Is/Sc.pl lib/unicode/Is/Sm.pl
	lib/unicode/Is/So.pl lib/unicode/Is/Space.pl (@4573..) perly.c
	vms/perly_c.vms (@4578..) deb.c (@4588..) lib/Pod/Checker.pm
	lib/Pod/Parser.pm lib/Pod/Usage.pm t/pod/poderrs.t
	t/pod/poderrs.xr (@4590..) pod/Makefile pod/roffitall unixish.h
	vos/vosish.h (@4602..) run.c (@4603..) utils/perlbug.PL
	utils/perldoc.PL (@4604..) hints/hpux.sh (@4606..)
	lib/strict.pm pod/perlsyn.pod (@4616..) ext/DB_File/DB_File.pm
	ext/Fcntl/Fcntl.pm ext/GDBM_File/GDBM_File.pm
	ext/Opcode/Opcode.pm ext/SDBM_File/SDBM_File.pm
	ext/Socket/Socket.pm lib/AutoLoader.pm lib/Getopt/Std.pm
	(@4623..) lib/ExtUtils/Manifest.pm (@4632..) pod/perlfaq2.pod
	(@4636..) t/op/misc.t t/pragma/warn/2use (@4641..)
	lib/Math/BigFloat.pm (@4685..) pod/perlfilter.pod
	pod/perlopentut.pod (@4699..) t/pragma/warn/pp_hot
	t/pragma/warn/pp_sys (@4709..) cygwin/Makefile.SHs
	os2/Makefile.SHs (@4710..) lib/Net/Ping.pm (@4711..)
	ext/POSIX/POSIX.xs ext/SDBM_File/sdbm/pair.c (@4717..)
	lib/ExtUtils/Liblist.pm (@4720..) t/lib/charnames.t
	t/lib/dumper.t (@4723..) lib/byte_heavy.pl (@4726..)
	t/pragma/warn/doop t/pragma/warn/pp t/pragma/warn/sv
	t/pragma/warn/utf8 (@4727..) lib/ExtUtils/xsubpp (@4731..)
	pod/perlre.pod (@4732..) INTERN.h (@4734..) globals.c (@4744..)
	lib/File/Copy.pm (@4753..) lib/ExtUtils/MM_VMS.pm
	lib/ExtUtils/MM_Win32.pm (@4754..) lib/ExtUtils/Install.pm
	(@4758..) ext/B/B/C.pm (@4763..) README.os2 (@4766..)
	lib/ExtUtils/MakeMaker.pm (@4769..) installperl (@4774..)
	lib/CPAN.pm lib/ExtUtils/Installed.pm lib/ExtUtils/MM_Unix.pm
	lib/ExtUtils/Mksymlists.pm lib/diagnostics.pm (@4777..)
	t/lib/thread.t (@4780..) pod/perl.pod (@4781..)
	ext/IO/lib/IO/Socket.pm (@4782..) win32/perlhost.h (@4792..)
	lib/Tie/Array.pm (@4796..) t/pragma/strict-vars (@4801..)
	win32/config.bc win32/config.gc win32/config.vc (@4817..)
	INSTALL (@4824..) utils/h2xs.PL (@4825..) embed.h (@4830..)
	ext/Data/Dumper/Dumper.pm (@4832..) lib/Tie/Handle.pm (@4833..)
	proto.h t/op/closure.t (@4834..) lib/base.pm lib/fields.pm
	(@4835..) dump.c (@4836..) t/io/fs.t (@4838..)
	lib/Carp/Heavy.pm (@4839..) t/cmd/while.t (@4848..)
	Porting/Glossary Porting/config.sh Porting/config_H (@4850..)
	lib/Sys/Hostname.pm (@4851..) ext/Devel/DProf/DProf.pm
	(@4852..) hints/cygwin.sh (@4853..) patchlevel.h (@4858..)
	ext/File/Glob/Glob.pm ext/IO/lib/IO/Socket/INET.pm
	ext/NDBM_File/NDBM_File.pm ext/ODBM_File/ODBM_File.pm
	ext/POSIX/POSIX.pm lib/Dumpvalue.pm lib/Fatal.pm
	lib/File/Path.pm lib/File/stat.pm lib/Math/Complex.pm
	lib/Math/Trig.pm lib/Shell.pm lib/constant.pm lib/lib.pm
	(@4860..) lib/AutoSplit.pm (@4873..) lib/Pod/Html.pm (@4883..)
	win32/perllib.c (@4884..) vos/config.h vos/config_h.SH_orig
	(@4896..) perly.y pod/perlrun.pod pod/perlsub.pod
	pod/perltodo.pod (@4905..) README.win32 lib/Class/Struct.pm
	(@4906..) Porting/p4desc (@4908..) ext/Devel/Peek/Peek.pm
	ext/Thread/Thread.pm lib/File/Find.pm lib/UNIVERSAL.pm
	pod/buildtoc pod/perlfork.pod (@4910..) t/op/fork.t (@4914..)
	XSUB.h av.h cop.h cv.h gv.h handy.h hv.h makedef.pl
	pod/perltoc.pod pp.h scope.h (@4915..) global.sym objXSUB.h
	(@4916..) lib/Cwd.pm (@4921..) doop.c t/pragma/warn/toke
	(@4930..) win32/win32.c (@4933..) embedvar.h intrpvar.h
	lib/charnames.pm op.h sv.h (@4937..) embed.pl (@4939..)
	lib/utf8.pm regcomp.c regexec.c (@4941..)
	vms/descrip_mms.template (@4944..) lib/warnings.pm warnings.pl
	(@4947..) lib/File/Spec/Win32.pm (@4949..) lib/perl5db.pl
	(@4955..) lib/Benchmark.pm (@4958..) lib/English.pm (@4960..)
	lib/byte.pm (@4969..) scope.c (@4970..)
	ext/Devel/DProf/DProf.xs (@4973..) malloc.c (@4974..) op.c
	pod/perldebug.pod pp_ctl.c (@4975..) Makefile.SH (@4977..)
	config_h.SH (@4978..) pod/perlop.pod (@4979..) pod/perlfunc.pod
	(@4998..) pod/perldiag.pod (@5001..) pp_sys.c (@5006..)
	EXTERN.h doio.c perl.h util.c (@5008..) av.c hv.c pp.c pp_hot.c
	utf8.c utf8.h (@5009..) pod/perldelta.pod pod/perlport.pod
	(@5015..) MANIFEST (@5016..) sv.c (@5017..) win32/config_H.bc
	win32/config_H.gc win32/config_H.vc (@5019..) win32/Makefile
	win32/makefile.mk (@5022..) win32/win32.h (@5024..) mg.c toke.c
	(@5025..) gv.c perl.c pod/perlvar.pod (@5029..)
	pod/perlhist.pod (@5034..) Configure (@5036..) Changes
	(@5038..) 'merge in' configure.com (@4773..)
  • Loading branch information
Charles Bailey committed Feb 9, 2000
1 parent 8560c20 commit cb50131
Show file tree
Hide file tree
Showing 375 changed files with 21,496 additions and 12,300 deletions.
1,701 changes: 1,449 additions & 252 deletions Changes
View file

Large diffs are not rendered by default.

1,340 changes: 709 additions & 631 deletions Configure
View file

Large diffs are not rendered by default.

4 changes: 2 additions & 2 deletions EXTERN.h
View file
@@ -1,6 +1,6 @@
/* EXTERN.h
*
* Copyright (c) 1991-1999, Larry Wall
* Copyright (c) 1991-2000, Larry Wall
*
* You may distribute under the terms of either the GNU General Public
* License or the Artistic License, as specified in the README file.
Expand Down Expand Up @@ -40,7 +40,7 @@
# define dEXTCONST const
# endif
# else
# if defined(CYGWIN) && defined(USEIMPORTLIB)
# if defined(__CYGWIN__) && defined(USEIMPORTLIB)
# define EXT extern __declspec(dllimport)
# define dEXT
# define EXTCONST extern __declspec(dllimport) const
Expand Down
100 changes: 56 additions & 44 deletions INSTALL
View file
Expand Up @@ -8,7 +8,8 @@ First, make sure you are installing an up-to-date version of Perl. If
you didn't get your Perl source from CPAN, check the latest version at
<URL:http://www.perl.com/CPAN/src/>.

The basic steps to build and install perl5 on a Unix system are:
The basic steps to build and install perl5 on a Unix system
with all the defaults are:

rm -f config.sh Policy.sh
sh Configure -de
Expand Down Expand Up @@ -42,20 +43,6 @@ For information on what's new in this release, see the
pod/perldelta.pod file. For more detailed information about specific
changes, see the Changes file.

IMPORTANT NOTE: 5.005_53 and later releases do not export unadorned
global symbols anymore. This means you may need to build older
extensions that have not been updated for the new naming convention
with:

perl Makefile.PL POLLUTE=1

Alternatively, you can enable CPP symbol pollution wholesale by
building perl itself with:

sh Configure -Accflags=-DPERL_POLLUTE

pod/perldelta.pod contains more details about this.

=head1 DESCRIPTION

This document is written in pod format as an easy way to indicate its
Expand All @@ -67,7 +54,8 @@ by lines beginning with '='. The other mark-up used is
C<code> literal code
L<name> A link (cross reference) to name

You should probably at least skim through this entire document before
Although most of the defaults are probably fine for most users,
you should probably at least skim through this entire document before
proceeding.

If you're building Perl on a non-Unix system, you should also read
Expand All @@ -80,6 +68,22 @@ system. (Unixware users should use the svr4.sh hint file.) If
there is a README file for your platform, then you should read
that too. Additional information is in the Porting/ directory.

=head1 WARNING: This version requires an extra step to build old extensions.

5.005_53 and later releases do not export unadorned
global symbols anymore. This means you may need to build older
extensions that have not been updated for the new naming convention
with:

perl Makefile.PL POLLUTE=1

Alternatively, you can enable CPP symbol pollution wholesale by
building perl itself with:

sh Configure -Accflags=-DPERL_POLLUTE

pod/perldelta.pod contains more details about this.

=head1 WARNING: This version may not be binary compatible with Perl 5.005.

Using the default Configure options for building perl should get you
Expand All @@ -102,7 +106,7 @@ The standard extensions supplied with Perl will be handled automatically.
On a related issue, old modules may possibly be affected by the
changes in the Perl language in the current release. Please see
pod/perldelta.pod (and pod/perl500Xdelta.pod) for a description of
what's changed. See also your installed copy of the perllocal.pod
what's changed. See your installed copy of the perllocal.pod
file for a (possibly incomplete) list of locally installed modules.
Also see CPAN::autobundle for one way to make a "bundle" of your
currently installed modules.
Expand All @@ -126,10 +130,10 @@ followed. This will enable us to officially support this option.

=head1 Space Requirements

The complete perl5 source tree takes up about 15 MB of disk space.
After completing make, it takes up roughly 20 MB, though the actual
The complete perl5 source tree takes up about 20 MB of disk space.
After completing make, it takes up roughly 30 MB, though the actual
total is likely to be quite system-dependent. The installation
directories need something on the order of 15 MB, though again that
directories need something on the order of 20 MB, though again that
value is system-dependent.

=head1 Start with a Fresh Distribution
Expand Down Expand Up @@ -333,7 +337,7 @@ The directories set up by Configure fall into three broad categories.

=item Directories for the perl distribution

By default, Configure will use the following directories for 5.6.
By default, Configure will use the following directories for 5.6.0.
$version is the full perl version number, including subversion, e.g.
5.6.0 or 5.6.1, and $archname is a string like sun4-sunos,
determined by Configure. The full definitions of all Configure
Expand All @@ -360,8 +364,7 @@ the common style is shown here.

After perl is installed, you may later wish to add modules (e.g. from
CPAN) or scripts. Configure will set up the following directories to
be used for installing those add-on modules and scripts. $version
is the perl version number, e.g. 5.6.0.
be used for installing those add-on modules and scripts.

Configure variable Default value
$siteprefix $prefix
Expand Down Expand Up @@ -582,7 +585,7 @@ If the generated Policy.sh file is unsuitable, you may freely edit it
to contain any valid shell commands. It will be run just after the
platform-specific hints files.

Note: Since the directory hierarchy for 5.6 contains a number of
Note: Since the directory hierarchy for 5.6.0 contains a number of
new vendor* and site* entries, your Policy.sh file will probably not
set them to your desired values. I encourage you to run Configure
interactively to be sure it puts things where you want them.
Expand Down Expand Up @@ -881,7 +884,17 @@ the Configure command line. Similarly, the Opcode extension is always
built by default, but you can skip it by setting the Configure variable
useopcode=false either in a hint file for from the command line.

You can learn more about each of these extensions by consulting the
If you unpack any additional extensions in the ext/ directory before
running Configure, then Configure will offer to build those additional
extensions as well. Most users probably shouldn't have to do this --
it is usually easier to build additional extensions later after perl
has been installed. However, if you wish to have those additional
extensions statically linked into the perl binary, then this offers a
convenient way to do that in one step. (It is not necessary, however;
you can build and install extensions just fine even if you don't have
dynamic loading. See lib/ExtUtils/MakeMaker.pm for more details.)

You can learn more about each of the supplied extensions by consulting the
documentation in the individual .pm modules, located under the
ext/ subdirectory.

Expand All @@ -904,7 +917,7 @@ to turn off each extension:
SDBM_File (Always included by default)
Opcode useopcode
Socket d_socket
Threads usethreads
Threads use5005threads
attrs (Always included by default)

Thus to skip the NDBM_File extension, you can use
Expand Down Expand Up @@ -1133,8 +1146,9 @@ $ccflags or $optimize, and then re-run

=item No sh

If you don't have sh, you'll have to copy the sample file Porting/config_H
to config.h and edit the config.h to reflect your system's peculiarities.
If you don't have sh, you'll have to copy the sample file
Porting/config.sh to config.sh and edit your config.sh to reflect your
system's peculiarities. See Porting/pumpkin.pod for more information.
You'll probably also have to extensively modify the extension building
mechanism.

Expand Down Expand Up @@ -1179,7 +1193,7 @@ libgdbm under HP-UX 11.
Specific information for the OS/2, Plan9, VMS and Win32 ports is in the
corresponding README files and subdirectories. Additional information,
including a glossary of all those config.sh variables, is in the Porting
subdirectory. Especially Porting/Glossary should come in handy.
subdirectory. Especially Porting/Glossary should come in handy.

Ports for other systems may also be available. You should check out
http://www.perl.com/CPAN/ports for current information on ports to
Expand Down Expand Up @@ -1704,8 +1718,9 @@ searched by version 5.6.0 will be

/usr/local/lib/perl5/site_perl/5.005/$archname
/usr/local/lib/perl5/site_perl/5.005
/usr/local/lib/perl5/site_perl/

Notice the last two entries -- Perl understands the default structure
Notice the last three entries -- Perl understands the default structure
of the $sitelib directories and will look back in older, compatible
directories. This way, modules installed under 5.005_03 will continue
to be usable by 5.005_03 but will also accessible to 5.6.0. Further,
Expand All @@ -1714,11 +1729,8 @@ present only in 5.6.0. That new module will get installed into
/usr/local/lib/perl5/site_perl/5.6.0 and will be available to 5.6.0,
but will not interfere with the 5.005_03 version.

Also, by default, 5.6.0 will look in

/usr/local/lib/perl5/site_perl/

for 5.004-era pure perl modules.
The last entry, /usr/local/lib/perl5/site_perl/, is there so that
5.6.0 will look for 5.004-era pure perl modules.

Lastly, suppose you now install version 5.6.1, which we'll assume is
binary compatible with 5.6.0 and 5.005. The directories searched
Expand Down Expand Up @@ -1775,15 +1787,15 @@ yet.

=head2 Upgrading from 5.005 to 5.6.0

Extensions built and installed with versions of perl prior to 5.005_50
will need to be recompiled to be used with 5.005_50 and later. You will,
however, be able to continue using 5.005 even after you install 5.6.
The 5.005 binary will still be able to find the modules built under
5.005; the 5.6.0 binary will look in the new $sitearch and $sitelib
directories, and will not find them. See also your installed copy
of the perllocal.pod file for a (possibly incomplete) list of locally
installed modules. Note that you want perllocal.pod not perllocale.pod
for installed module information.
Most extensions built and installed with versions of perl
prior to 5.005_50 will not need to be recompiled to be used with
5.6.0. If you find you do need to rebuild an extension with 5.6.0,
you may safely do so without disturbing the 5.005 installation.
(See L<"Coexistence with earlier versions of perl5"> above.)

See your installed copy of the perllocal.pod file for a (possibly
incomplete) list of locally installed modules. Note that you want
perllocal.pod not perllocale.pod for installed module information.

=head1 Coexistence with perl4

Expand Down
2 changes: 1 addition & 1 deletion INTERN.h
View file
@@ -1,6 +1,6 @@
/* INTERN.h
*
* Copyright (c) 1991-1999, Larry Wall
* Copyright (c) 1991-2000, Larry Wall
*
* You may distribute under the terms of either the GNU General Public
* License or the Artistic License, as specified in the README file.
Expand Down
20 changes: 16 additions & 4 deletions MANIFEST
View file
Expand Up @@ -53,7 +53,7 @@ README.vms Notes about VMS port
README.vos Notes about Stratus VOS port
README.win32 Notes about Win32 port
Todo The Wishlist
Todo-5.005 What needs doing before 5.005 release
Todo-5.6 What needs doing before/during the 5.6.x release cycle
XSUB.h Include file for extension subroutines
apollo/netinet/in.h Apollo DomainOS port: C header file frontend
av.c Array value code
Expand Down Expand Up @@ -364,6 +364,9 @@ ext/SDBM_File/typemap SDBM extension interface types
ext/Socket/Makefile.PL Socket extension makefile writer
ext/Socket/Socket.pm Socket extension Perl module
ext/Socket/Socket.xs Socket extension external subroutines
ext/Sys/Syslog/Makefile.PL Sys::Syslog extension makefile writer
ext/Sys/Syslog/Syslog.pm Sys::Syslog extension Perl module
ext/Sys/Syslog/Syslog.xs Sys::Syslog extension external subroutines
ext/Thread/Makefile.PL Thread extension makefile writer
ext/Thread/Notes Thread notes
ext/Thread/README Thread README
Expand Down Expand Up @@ -626,10 +629,12 @@ lib/Net/netent.pm By-name interface to Perl's builtin getnet*
lib/Net/protoent.pm By-name interface to Perl's builtin getproto*
lib/Net/servent.pm By-name interface to Perl's builtin getserv*
lib/Pod/Checker.pm Pod-Parser - check POD documents for syntax errors
lib/Pod/Find.pm used by pod/splitpod
lib/Pod/Functions.pm used by pod/splitpod
lib/Pod/Html.pm Convert POD data to HTML
lib/Pod/InputObjects.pm Pod-Parser - define objects for input streams
lib/Pod/Man.pm Convert POD data to *roff
lib/Pod/ParseUtils.pm Pod-Parser - pod utility functions
lib/Pod/Parser.pm Pod-Parser - define base class for parsing POD
lib/Pod/Select.pm Pod-Parser - select portions of POD docs
lib/Pod/Text.pm Pod-Parser - convert POD data to formatted ASCII text
Expand All @@ -642,7 +647,6 @@ lib/SelfLoader.pm Load functions only on demand
lib/Shell.pm Make AUTOLOADed system() calls
lib/Symbol.pm Symbol table manipulation routines
lib/Sys/Hostname.pm Hostname methods
lib/Sys/Syslog.pm Perl module supporting syslogging
lib/Term/Cap.pm Perl module supporting termcap usage
lib/Term/Complete.pm A command completion subroutine
lib/Term/ReadLine.pm Stub readline library
Expand Down Expand Up @@ -678,7 +682,6 @@ lib/blib.pm For "use blib"
lib/byte.pm Pragma to enable byte operations
lib/byte_heavy.pl Support routines for byte pragma
lib/cacheout.pl Manages output filehandles when you need too many
lib/caller.pm Inherit pragmatic attributes from caller's context
lib/charnames.pm Character names
lib/chat2.pl Obsolete ipc library (use Comm.pm etc instead)
lib/complete.pl A command completion subroutine
Expand Down Expand Up @@ -1047,6 +1050,7 @@ pod/checkpods.PL Tool to check for common errors in pods
pod/perl.pod Top level perl man page
pod/perl5004delta.pod Changes from 5.003 to 5.004
pod/perl5005delta.pod Changes from 5.004 to 5.005
pod/perlapi.pod Perl API documentation (autogenerated)
pod/perlapio.pod IO API info
pod/perlbook.pod Book info
pod/perlbot.pod Object-oriented Bag o' Tricks
Expand Down Expand Up @@ -1076,6 +1080,7 @@ pod/perlfunc.pod Function info
pod/perlguts.pod Internals info
pod/perlhack.pod Perl hackers guide
pod/perlhist.pod Perl history info
pod/perlintern.pod Perl internal function docs (autogenrated)
pod/perlipc.pod IPC info
pod/perllexwarn.pod Lexical Warnings info
pod/perllocale.pod Locale support info
Expand Down Expand Up @@ -1103,6 +1108,7 @@ pod/perltodo.pod Todo list explained
pod/perltoot.pod Tom's object-oriented tutorial
pod/perltootc.pod Tom's object-oriented tutorial (more on class data)
pod/perltrap.pod Trap info
pod/perlunicode.pod Unicode support info
pod/perlvar.pod Variable info
pod/perlxs.pod XS api info
pod/perlxstut.pod XS tutorial
Expand Down Expand Up @@ -1311,6 +1317,7 @@ t/op/do.t See if subroutines work
t/op/each.t See if hash iterators work
t/op/eval.t See if eval operator works
t/op/exec.t See if exec and system work
t/op/exists_sub.t See if exists(&sub) works
t/op/exp.t See if math functions work
t/op/fh.t See if filehandles work
t/op/filetest.t See if file tests work
Expand Down Expand Up @@ -1381,6 +1388,7 @@ t/op/undef.t See if undef works
t/op/universal.t See if UNIVERSAL class works
t/op/unshift.t See if unshift works
t/op/vec.t See if vectors work
t/op/ver.t See if version tuples work
t/op/wantarray.t See if wantarray works
t/op/write.t See if write works
t/pod/emptycmd.t Test empty pod directives
Expand Down Expand Up @@ -1415,6 +1423,7 @@ t/pod/testcmp.pl Module to compare output against expected results
t/pod/testp2pt.pl Module to test Pod::PlainText for a given file
t/pod/testpchk.pl Module to test Pod::Checker for a given file
t/pragma/constant.t See if compile-time constants work
t/pragma/diagnostics.t See if diagnostics.pm works
t/pragma/locale.t See if locale support works
t/pragma/locale/latin1 Part of locale.t in Latin 1
t/pragma/locale/utf8 Part of locale.t in UTF8
Expand Down Expand Up @@ -1519,8 +1528,10 @@ vms/vmsish.h VMS-specific C header for Perl core
vms/writemain.pl Generate perlmain.c from miniperlmain.c+extensions
vos/Changes Changes made to port Perl to the VOS operating system
vos/build.cm VOS command macro to build Perl
vos/compile_perl.cm VOS commnad macro to build multiple version of Perl
vos/compile_perl.cm VOS command macro to build multiple version of Perl
vos/config.def input for config.pl
vos/config.h config.h for VOS
vos/config.pl script to convert a config_h.SH to a config.h
vos/config_h.SH_orig config_h.SH at the time config.h was created
vos/perl.bind VOS bind control file
vos/test_vos_dummies.c Test program for "vos_dummies.c"
Expand All @@ -1529,6 +1540,7 @@ vos/vosish.h VOS-specific header file
warnings.h The warning numbers
warnings.pl Program to write warnings.h and lib/warnings.pm
win32/Makefile Win32 makefile for NMAKE (Visual C++ build)
win32/bin/exetype.pl Set executable type to CONSOLE or WINDOWS
win32/bin/perlglob.pl Win32 globbing
win32/bin/pl2bat.pl wrap perl scripts into batch files
win32/bin/runperl.pl run perl script via batch file namesake
Expand Down

0 comments on commit cb50131

Please sign in to comment.