rk3399: NETDEV WATCHDOG: eth0 (rk_gmac-dwmac): transmit queue 0 timed out #27

jakob-tsd · 2017-07-25T15:01:43Z

On the RK3399 running the release-4.4 kernel, it is fairly easy to lock up the Ethernet interface by running heavy traffic over it. After a few minutes you'll get a kernel message like this:

[ 3067.819477] NETDEV WATCHDOG: eth0 (rk_gmac-dwmac): transmit queue 0 timed out

This has been reported against the Firefly-RK3399 board here but we are also seeing this on our hardware. Is this a known issue?

Let me know if you need help for reproducing this.

The text was updated successfully, but these errors were encountered:

jakob-tsd · 2017-07-26T08:44:46Z

I now have a reproducer that kills ethernet within a few seconds.

You need a Linux server (x86 or whatever, just needs gigabit ethernet). Run two instances of iperf3 server:

iperf3 -s -p 5202 &
iperf3 -s -p 5203

Then, on the the RK3399, save this script as ethammer.sh:

#!/bin/bash -eux
#
# ethammer.sh
#
SERVER=10.2.0.1
iperf3 -c $SERVER -p 5202 -t 3600 -P 2 -T TX &
iperf3 -c $SERVER -p 5203 -t 3600 -P 2 -R -T RX &
wait

You will get something like this when running it:

# ./ethammer.sh
+ SERVER=10.2.0.17
+ iperf3 -c 10.2.0.17 -p 5202 -t 3600 -P 2 -T TX
+ wait
+ iperf3 -c 10.2.0.17 -p 5203 -t 3600 -P 2 -R -T RX
TX:  Connecting to host 10.2.0.17, port 5202
RX:  Connecting to host 10.2.0.17, port 5203
RX:  Reverse mode, remote host 10.2.0.17 is sending
TX:  [  4] local 10.2.143.234 port 58864 connected to 10.2.0.17 port 5202
RX:  [  4] local 10.2.143.234 port 59206 connected to 10.2.0.17 port 5203
TX:  [  6] local 10.2.143.234 port 58868 connected to 10.2.0.17 port 5202
RX:  [  6] local 10.2.143.234 port 59210 connected to 10.2.0.17 port 5203
TX:  [ ID] Interval           Transfer     Bandwidth       Retr  Cwnd
TX:  [  4]   0.00-1.01   sec  45.8 MBytes   382 Mbits/sec    0    672 KBytes
TX:  [  6]   0.00-1.01   sec  43.6 MBytes   363 Mbits/sec    0    503 KBytes
TX:  [SUM]   0.00-1.01   sec  89.4 MBytes   745 Mbits/sec    0
RX:  [ ID] Interval           Transfer     Bandwidth
RX:  [  4]   0.00-1.04   sec  31.2 MBytes   251 Mbits/sec
RX:  [  6]   0.00-1.04   sec  19.9 MBytes   161 Mbits/sec
RX:  [SUM]   0.00-1.04   sec  51.1 MBytes   412 Mbits/sec
TX:  - - - - - - - - - - - - - - - - - - - - - - - - -
TX:  [  4]   1.01-2.00   sec  14.8 MBytes   125 Mbits/sec    1   1.41 KBytes
TX:  [  6]   1.01-2.00   sec  13.6 MBytes   115 Mbits/sec    0   1.41 KBytes
TX:  [SUM]   1.01-2.00   sec  28.4 MBytes   239 Mbits/sec    1
RX:  - - - - - - - - - - - - - - - - - - - - - - - - -
RX:  [  4]   1.04-2.00   sec  25.5 MBytes   223 Mbits/sec
RX:  [  6]   1.04-2.00   sec  24.7 MBytes   216 Mbits/sec
RX:  [SUM]   1.04-2.00   sec  50.2 MBytes   439 Mbits/sec
TX:  - - - - - - - - - - - - - - - - - - - - - - - - -
TX:  [  4]   2.00-3.00   sec  0.00 Bytes  0.00 bits/sec    0   1.41 KBytes
TX:  [  6]   2.00-3.00   sec  0.00 Bytes  0.00 bits/sec    0   1.41 KBytes
TX:  [SUM]   2.00-3.00   sec  0.00 Bytes  0.00 bits/sec    0
RX:  - - - - - - - - - - - - - - - - - - - - - - - - -
RX:  [  4]   2.00-3.00   sec  0.00 Bytes  0.00 bits/sec
RX:  [  6]   2.00-3.00   sec  0.00 Bytes  0.00 bits/sec
RX:  [SUM]   2.00-3.00   sec  0.00 Bytes  0.00 bits/sec
TX:  - - - - - - - - - - - - - - - - - - - - - - - - -
TX:  [  4]   3.00-4.00   sec  0.00 Bytes  0.00 bits/sec    0   1.41 KBytes
TX:  [  6]   3.00-4.00   sec  0.00 Bytes  0.00 bits/sec    0   1.41 KBytes
TX:  [SUM]   3.00-4.00   sec  0.00 Bytes  0.00 bits/sec    0
RX:  - - - - - - - - - - - - - - - - - - - - - - - - -
RX:  [  4]   3.00-4.00   sec  0.00 Bytes  0.00 bits/sec
RX:  [  6]   3.00-4.00   sec  0.00 Bytes  0.00 bits/sec
RX:  [SUM]   3.00-4.00   sec  0.00 Bytes  0.00 bits/sec
^CRX:  - - - - - - - - - - - - - - - - - - - - - - - - -
RX:  [  4]   4.00-4.59   sec  0.00 Bytes  0.00 bits/sec
RX:  [  6]   4.00-4.59   sec  0.00 Bytes  0.00 bits/sec
RX:  [SUM]   4.00-4.59   sec  0.00 Bytes  0.00 bits/sec
RX:  - - - - - - - - - - - - - - - - - - - - - - - - -
RX:  [ ID] Interval           Transfer     Bandwidth
RX:  [  4]   0.00-4.59   sec  0.00 Bytes  0.00 bits/sec                  sender
RX:  [  4]   0.00-4.59   sec  56.7 MBytes   104 Mbits/sec                  receiver
RX:  [  6]   0.00-4.59   sec  0.00 Bytes  0.00 bits/sec                  sender
RX:  [  6]   0.00-4.59   sec  44.7 MBytes  81.6 Mbits/sec                  receiver
RX:  [SUM]   0.00-4.59   sec  0.00 Bytes  0.00 bits/sec                  sender
RX:  [SUM]   0.00-4.59   sec   101 MBytes   185 Mbits/sec                  receiver
iperf3: interrupt - the client has terminated
TX:  - - - - - - - - - - - - - - - - - - - - - - - - -
TX:  [  4]   4.00-4.61   sec  0.00 Bytes  0.00 bits/sec    0   1.41 KBytes
TX:  [  6]   4.00-4.61   sec  0.00 Bytes  0.00 bits/sec    0   1.41 KBytes
TX:  [SUM]   4.00-4.61   sec  0.00 Bytes  0.00 bits/sec    0
TX:  - - - - - - - - - - - - - - - - - - - - - - - - -
TX:  [ ID] Interval           Transfer     Bandwidth       Retr
TX:  [  4]   0.00-4.61   sec  60.6 MBytes   110 Mbits/sec    1             sender
TX:  [  4]   0.00-4.61   sec  0.00 Bytes  0.00 bits/sec                  receiver
TX:  [  6]   0.00-4.61   sec  57.2 MBytes   104 Mbits/sec    0             sender
TX:  [  6]   0.00-4.61   sec  0.00 Bytes  0.00 bits/sec                  receiver
TX:  [SUM]   0.00-4.61   sec   118 MBytes   214 Mbits/sec    1             sender
TX:  [SUM]   0.00-4.61   sec  0.00 Bytes  0.00 bits/sec                  receiver
iperf3: interrupt - the client has terminated

root@rk3399-q7:~# ^C
root@rk3399-q7:~# [  167.764344] NETDEV WATCHDOG: eth0 (rk_gmac-dwmac): transmit queue 0 timed out
[  167.771799] ------------[ cut here ]------------
[  167.776539] WARNING: at net/sched/sch_generic.c:306
[  167.781538] Modules linked in:
[  167.784698]
[  167.786246] CPU: 5 PID: 0 Comm: swapper/5 Not tainted 4.4.70-35223-g5fa317508aaf-dirty #5
[...]

wzyy2 · 2017-07-26T13:19:16Z

Try IRQ Affinity?

@KevanLan @rk-hgc
Could you guys have a look?

jakob-tsd · 2017-07-26T13:36:34Z

IRQ affinity: Good idea. It looks like the eth0 irq always arrives at CPU0:

# cat /proc/interrupts | grep -e 'CPU0\|eth0'
           CPU0       CPU1       CPU2       CPU3       CPU4       CPU5
 24:      25589          0          0          0          0          0     GICv3  44 Level     eth0

I moved it to CPU5, using echo 20 > /proc/irq/24/smp_affinity, also seems to take affect:

# cat /proc/interrupts | grep -e 'CPU0\|eth0'
           CPU0       CPU1       CPU2       CPU3       CPU4       CPU5
 24:        144          0          0          0          0      56139     GICv3  44 Level     eth0

But the hang still happens after something like two seconds.

KevanLan · 2017-07-26T13:36:50Z

@rk-hgc will reproduce it by EXCAVATOR board。

jakob-tsd · 2017-07-26T16:34:55Z

I managed to get rid of the hang by increasing the voltage on the LOGIC_VDD rail. Looks like a power management issue on our board. Wonder if it's a similar story for the Firefly-RK3399. Anyway, I think I'll close this, thanks!

commit 81ddd8c upstream. Reviewed-by: Jeff Layton <jlayton@redhat.com> file_info_lock is not initalized in initiate_cifs_search(), leading to the following splat after a simple "mount.cifs ... dir && ls dir/": BUG: spinlock bad magic on CPU#0, ls/486 lock: 0xffff880009301110, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 CPU: 0 PID: 486 Comm: ls Not tainted 4.9.0 rockchip-linux#27 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ffffc900042f3db0 ffffffff81327533 0000000000000000 ffff880009301110 ffffc900042f3dd0 ffffffff810baf75 ffff880009301110 ffffffff817ae077 ffffc900042f3df0 ffffffff810baff6 ffff880009301110 ffff880008d69900 Call Trace: [<ffffffff81327533>] dump_stack+0x65/0x92 [<ffffffff810baf75>] spin_dump+0x85/0xe0 [<ffffffff810baff6>] spin_bug+0x26/0x30 [<ffffffff810bb159>] do_raw_spin_lock+0xe9/0x130 [<ffffffff8159ad2f>] _raw_spin_lock+0x1f/0x30 [<ffffffff8127e50d>] cifs_closedir+0x4d/0x100 [<ffffffff81181cfd>] __fput+0x5d/0x160 [<ffffffff81181e3e>] ____fput+0xe/0x10 [<ffffffff8109410e>] task_work_run+0x7e/0xa0 [<ffffffff81002512>] exit_to_usermode_loop+0x92/0xa0 [<ffffffff810026f9>] syscall_return_slowpath+0x49/0x50 [<ffffffff8159b484>] entry_SYSCALL_64_fastpath+0xa7/0xa9 Fixes: 3afca26 ("Clarify locking of cifs file and tcon structures and make more granular") Signed-off-by: Rabin Vincent <rabinv@axis.com> Signed-off-by: Steve French <smfrench@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 3256d29 ] lockdep spotted that we are using rfs_h.lock in enic_get_rxnfc() without initializing. rfs_h.lock is initialized in enic_open(). But ethtool_ops can be called when interface is down. Move enic_rfs_flw_tbl_init to enic_probe. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 18 PID: 1189 Comm: ethtool Not tainted 4.17.0-rc7-devel+ #27 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 Call Trace: dump_stack+0x85/0xc0 register_lock_class+0x550/0x560 ? __handle_mm_fault+0xa8b/0x1100 __lock_acquire+0x81/0x670 lock_acquire+0xb9/0x1e0 ? enic_get_rxnfc+0x139/0x2b0 [enic] _raw_spin_lock_bh+0x38/0x80 ? enic_get_rxnfc+0x139/0x2b0 [enic] enic_get_rxnfc+0x139/0x2b0 [enic] ethtool_get_rxnfc+0x8d/0x1c0 dev_ethtool+0x16c8/0x2400 ? __mutex_lock+0x64d/0xa00 ? dev_load+0x6a/0x150 dev_ioctl+0x253/0x4b0 sock_do_ioctl+0x9a/0x130 sock_ioctl+0x1af/0x350 do_vfs_ioctl+0x8e/0x670 ? syscall_trace_enter+0x1e2/0x380 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x5a/0x170 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Split irqchip allows pic and ioapic routes to be used without them being created, which results in NULL access. Check for NULL and avoid it. (The setup is too racy for a nicer solutions.) Found by syzkaller: general protection fault: 0000 [FireflyTeam#1] SMP DEBUG_PAGEALLOC KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 3 PID: 11923 Comm: kworker/3:2 Not tainted 4.9.0-rc5+ rockchip-linux#27 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: events irqfd_inject task: ffff88006a06c7c0 task.stack: ffff880068638000 RIP: 0010:[...] [...] __lock_acquire+0xb35/0x3380 kernel/locking/lockdep.c:3221 RSP: 0000:ffff88006863ea20 EFLAGS: 00010006 RAX: dffffc0000000000 RBX: dffffc0000000000 RCX: 0000000000000000 RDX: 0000000000000039 RSI: 0000000000000000 RDI: 1ffff1000d0c7d9e RBP: ffff88006863ef58 R08: 0000000000000001 R09: 0000000000000000 R10: 00000000000001c8 R11: 0000000000000000 R12: ffff88006a06c7c0 R13: 0000000000000001 R14: ffffffff8baab1a0 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff88006d100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004abdd0 CR3: 000000003e2f2000 CR4: 00000000000026e0 Stack: ffffffff894d0098 1ffff1000d0c7d56 ffff88006863ecd0 dffffc0000000000 ffff88006a06c7c0 0000000000000000 ffff88006863ecf8 0000000000000082 0000000000000000 ffffffff815dd7c1 ffffffff00000000 ffffffff00000000 Call Trace: [...] lock_acquire+0x2a2/0x790 kernel/locking/lockdep.c:3746 [...] __raw_spin_lock include/linux/spinlock_api_smp.h:144 [...] _raw_spin_lock+0x38/0x50 kernel/locking/spinlock.c:151 [...] spin_lock include/linux/spinlock.h:302 [...] kvm_ioapic_set_irq+0x4c/0x100 arch/x86/kvm/ioapic.c:379 [...] kvm_set_ioapic_irq+0x8f/0xc0 arch/x86/kvm/irq_comm.c:52 [...] kvm_set_irq+0x239/0x640 arch/x86/kvm/../../../virt/kvm/irqchip.c:101 [...] irqfd_inject+0xb4/0x150 arch/x86/kvm/../../../virt/kvm/eventfd.c:60 [...] process_one_work+0xb40/0x1ba0 kernel/workqueue.c:2096 [...] worker_thread+0x214/0x18a0 kernel/workqueue.c:2230 [...] kthread+0x328/0x3e0 kernel/kthread.c:209 [...] ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:433 Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: stable@vger.kernel.org Fixes: 49df639 ("KVM: x86: Split the APIC from the rest of IRQCHIP.") Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Reviewed-by: Jeff Layton <jlayton@redhat.com> CC: Stable <stable@vger.kernel.org> file_info_lock is not initalized in initiate_cifs_search(), leading to the following splat after a simple "mount.cifs ... dir && ls dir/": BUG: spinlock bad magic on CPU#0, ls/486 lock: 0xffff880009301110, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 CPU: 0 PID: 486 Comm: ls Not tainted 4.9.0 rockchip-linux#27 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ffffc900042f3db0 ffffffff81327533 0000000000000000 ffff880009301110 ffffc900042f3dd0 ffffffff810baf75 ffff880009301110 ffffffff817ae077 ffffc900042f3df0 ffffffff810baff6 ffff880009301110 ffff880008d69900 Call Trace: [<ffffffff81327533>] dump_stack+0x65/0x92 [<ffffffff810baf75>] spin_dump+0x85/0xe0 [<ffffffff810baff6>] spin_bug+0x26/0x30 [<ffffffff810bb159>] do_raw_spin_lock+0xe9/0x130 [<ffffffff8159ad2f>] _raw_spin_lock+0x1f/0x30 [<ffffffff8127e50d>] cifs_closedir+0x4d/0x100 [<ffffffff81181cfd>] __fput+0x5d/0x160 [<ffffffff81181e3e>] ____fput+0xe/0x10 [<ffffffff8109410e>] task_work_run+0x7e/0xa0 [<ffffffff81002512>] exit_to_usermode_loop+0x92/0xa0 [<ffffffff810026f9>] syscall_return_slowpath+0x49/0x50 [<ffffffff8159b484>] entry_SYSCALL_64_fastpath+0xa7/0xa9 Fixes: 3afca26 ("Clarify locking of cifs file and tcon structures and make more granular") Signed-off-by: Rabin Vincent <rabinv@axis.com> Signed-off-by: Steve French <smfrench@gmail.com>

[ Upstream commit dad0653 ] In virtualized setup, when system reboots due to warm reset interrupt storm is seen. Call Trace: <IRQ> dump_stack+0x70/0xa5 __report_bad_irq+0x2e/0xc0 note_interrupt+0x248/0x290 ? add_interrupt_randomness+0x30/0x220 handle_irq_event_percpu+0x54/0x80 handle_irq_event+0x39/0x60 handle_fasteoi_irq+0x91/0x150 handle_irq+0x108/0x180 do_IRQ+0x52/0xf0 common_interrupt+0xf/0xf </IRQ> RIP: 0033:0x76fc2cfabc1d Code: 24 28 bf 03 00 00 00 31 c0 48 8d 35 63 77 0e 00 48 8d 15 2e 94 0e 00 4c 89 f9 49 89 d9 4c 89 d3 e8 b8 e2 01 00 48 8b 54 24 18 <48> 89 ef 48 89 de 4c 89 e1 e8 d5 97 01 00 84 c0 74 2d 48 8b 04 24 RSP: 002b:00007ffd247c1fc0 EFLAGS: 00000293 ORIG_RAX: ffffffffffffffda RAX: 0000000000000000 RBX: 00007ffd247c1ff0 RCX: 000000000003d3ce RDX: 0000000000000000 RSI: 00007ffd247c1ff0 RDI: 000076fc2cbb6010 RBP: 000076fc2cded010 R08: 00007ffd247c2210 R09: 00007ffd247c22a0 R10: 000076fc29465470 R11: 0000000000000000 R12: 00007ffd247c1fc0 R13: 000076fc2ce8e470 R14: 000076fc27ec9960 R15: 0000000000000414 handlers: [<000000000d3fa913>] idma64_irq Disabling IRQ #27 To avoid interrupt storm, set the device in reset state before bringing out the device from reset state. Changelog v2: - correct the subject line by adding "mfd: " Signed-off-by: Binbin Wu <binbin.wu@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

Add a check for the length of the qpin structure to prevent out-of-bounds reads BUG: KASAN: slab-out-of-bounds in create_raw_packet_qp+0x114c/0x15e2 Read of size 8192 at addr ffff880066b99290 by task syz-executor3/549 CPU: 3 PID: 549 Comm: syz-executor3 Not tainted 4.15.0-rc2+ rockchip-linux#27 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 Call Trace: dump_stack+0x8d/0xd4 print_address_description+0x73/0x290 kasan_report+0x25c/0x370 ? create_raw_packet_qp+0x114c/0x15e2 memcpy+0x1f/0x50 create_raw_packet_qp+0x114c/0x15e2 ? create_raw_packet_qp_tis.isra.28+0x13d/0x13d ? lock_acquire+0x370/0x370 create_qp_common+0x2245/0x3b50 ? destroy_qp_user.isra.47+0x100/0x100 ? kasan_kmalloc+0x13d/0x170 ? sched_clock_cpu+0x18/0x180 ? fs_reclaim_acquire.part.15+0x5/0x30 ? __lock_acquire+0xa11/0x1da0 ? sched_clock_cpu+0x18/0x180 ? kmem_cache_alloc_trace+0x17e/0x310 ? mlx5_ib_create_qp+0x30e/0x17b0 mlx5_ib_create_qp+0x33d/0x17b0 ? sched_clock_cpu+0x18/0x180 ? create_qp_common+0x3b50/0x3b50 ? lock_acquire+0x370/0x370 ? __radix_tree_lookup+0x180/0x220 ? uverbs_try_lock_object+0x68/0xc0 ? rdma_lookup_get_uobject+0x114/0x240 create_qp.isra.5+0xce4/0x1e20 ? ib_uverbs_ex_create_cq_cb+0xa0/0xa0 ? copy_ah_attr_from_uverbs.isra.2+0xa00/0xa00 ? ib_uverbs_cq_event_handler+0x160/0x160 ? __might_fault+0x17c/0x1c0 ib_uverbs_create_qp+0x21b/0x2a0 ? ib_uverbs_destroy_cq+0x2e0/0x2e0 ib_uverbs_write+0x55a/0xad0 ? ib_uverbs_destroy_cq+0x2e0/0x2e0 ? ib_uverbs_destroy_cq+0x2e0/0x2e0 ? ib_uverbs_open+0x760/0x760 ? futex_wake+0x147/0x410 ? check_prev_add+0x1680/0x1680 ? do_futex+0x3d3/0xa60 ? sched_clock_cpu+0x18/0x180 __vfs_write+0xf7/0x5c0 ? ib_uverbs_open+0x760/0x760 ? kernel_read+0x110/0x110 ? lock_acquire+0x370/0x370 ? __fget+0x264/0x3b0 vfs_write+0x18a/0x460 SyS_write+0xc7/0x1a0 ? SyS_read+0x1a0/0x1a0 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL_64_fastpath+0x18/0x85 RIP: 0033:0x4477b9 RSP: 002b:00007f1822cadc18 EFLAGS: 00000292 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00000000004477b9 RDX: 0000000000000070 RSI: 000000002000a000 RDI: 0000000000000005 RBP: 0000000000708000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000292 R12: 00000000ffffffff R13: 0000000000005d70 R14: 00000000006e6e30 R15: 0000000020010ff0 Allocated by task 549: __kmalloc+0x15e/0x340 kvmalloc_node+0xa1/0xd0 create_user_qp.isra.46+0xd42/0x1610 create_qp_common+0x2e63/0x3b50 mlx5_ib_create_qp+0x33d/0x17b0 create_qp.isra.5+0xce4/0x1e20 ib_uverbs_create_qp+0x21b/0x2a0 ib_uverbs_write+0x55a/0xad0 __vfs_write+0xf7/0x5c0 vfs_write+0x18a/0x460 SyS_write+0xc7/0x1a0 entry_SYSCALL_64_fastpath+0x18/0x85 Freed by task 368: kfree+0xeb/0x2f0 kernfs_fop_release+0x140/0x180 __fput+0x266/0x700 task_work_run+0x104/0x180 exit_to_usermode_loop+0xf7/0x110 syscall_return_slowpath+0x298/0x370 entry_SYSCALL_64_fastpath+0x83/0x85 The buggy address belongs to the object at ffff880066b99180 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 272 bytes inside of 512-byte region [ffff880066b99180, ffff880066b99380) The buggy address belongs to the page: page:000000006040eedd count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 flags: 0x4000000000008100(slab|head) raw: 4000000000008100 0000000000000000 0000000000000000 0000000180190019 raw: ffffea00019a7500 0000000b0000000b ffff88006c403080 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff880066b99180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff880066b99200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff880066b99280: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff880066b99300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff880066b99380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Cc: syzkaller <syzkaller@googlegroups.com> Fixes: 0fb2ed6 ("IB/mlx5: Add create and destroy functionality for Raw Packet QP") Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>

Following kernel panic is observed on 64bit machine while loading the driver. It is fixed if we pass dynamically allocated memory to SDIO for DMA. BUG: unable to handle kernel paging request at ffffeb04000172e0 IP: sg_miter_stop+0x56/0x70 PGD 0 P4D 0 Oops: 0000 [FireflyTeam#1] SMP PTI Modules linked in: rsi_sdio(OE+) rsi_91x(OE) btrsi(OE) rfcomm bluetooth ecdh_generic mac80211 mmc_block fuse xt_CHECKSUM iptable_mangle drm_kms_helper mmc_core serio_raw drm firewire_ohci tg3 CPU: 0 PID: 4003 Comm: insmod Tainted: G OE 4.16.0-rc1+ rockchip-linux#27 Hardware name: Dell Inc. Latitude E5500 /0DW634, BIOS A19 06/13/2013 RIP: 0010:sg_miter_stop+0x56/0x70 RSP: 0018:ffff88007d003e78 EFLAGS: 00010002 RAX: 0000000000000003 RBX: 0000000000000004 RCX: 0000000000000000 RDX: ffffeb04000172c0 RSI: ffff88002f58002c RDI: ffff88007d003e80 RBP: 0000000000000004 R08: ffff88007d003e80 R09: 0000000000000008 R10: 0000000000000003 R11: 0000000000000001 R12: 0000000000000004 R13: ffff88002f580028 R14: 0000000000000000 R15: 0000000000000004 FS: 00007f35c29db700(0000) GS:ffff88007d000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffeb04000172e0 CR3: 000000007038e000 CR4: 00000000000406f0 Call Trace: <IRQ> sg_copy_buffer+0xc6/0xf0 sdhci_tasklet_finish+0x170/0x260 [sdhci] tasklet_action+0xf4/0x100 __do_softirq+0xef/0x26e irq_exit+0xbe/0xd0 do_IRQ+0x4a/0xc0 common_interrupt+0xa2/0xa2 </IRQ> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

[ Upstream commit dad0653 ] In virtualized setup, when system reboots due to warm reset interrupt storm is seen. Call Trace: <IRQ> dump_stack+0x70/0xa5 __report_bad_irq+0x2e/0xc0 note_interrupt+0x248/0x290 ? add_interrupt_randomness+0x30/0x220 handle_irq_event_percpu+0x54/0x80 handle_irq_event+0x39/0x60 handle_fasteoi_irq+0x91/0x150 handle_irq+0x108/0x180 do_IRQ+0x52/0xf0 common_interrupt+0xf/0xf </IRQ> RIP: 0033:0x76fc2cfabc1d Code: 24 28 bf 03 00 00 00 31 c0 48 8d 35 63 77 0e 00 48 8d 15 2e 94 0e 00 4c 89 f9 49 89 d9 4c 89 d3 e8 b8 e2 01 00 48 8b 54 24 18 <48> 89 ef 48 89 de 4c 89 e1 e8 d5 97 01 00 84 c0 74 2d 48 8b 04 24 RSP: 002b:00007ffd247c1fc0 EFLAGS: 00000293 ORIG_RAX: ffffffffffffffda RAX: 0000000000000000 RBX: 00007ffd247c1ff0 RCX: 000000000003d3ce RDX: 0000000000000000 RSI: 00007ffd247c1ff0 RDI: 000076fc2cbb6010 RBP: 000076fc2cded010 R08: 00007ffd247c2210 R09: 00007ffd247c22a0 R10: 000076fc29465470 R11: 0000000000000000 R12: 00007ffd247c1fc0 R13: 000076fc2ce8e470 R14: 000076fc27ec9960 R15: 0000000000000414 handlers: [<000000000d3fa913>] idma64_irq Disabling IRQ rockchip-linux#27 To avoid interrupt storm, set the device in reset state before bringing out the device from reset state. Changelog v2: - correct the subject line by adding "mfd: " Signed-off-by: Binbin Wu <binbin.wu@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

…_neon_begin, _end In a arm64 server(QDF2400),I met a similar might-sleep warning as [1]: [ 7.019116] BUG: sleeping function called from invalid context at ./include/crypto/algapi.h:416 [ 7.027863] in_atomic(): 1, irqs_disabled(): 0, pid: 410, name: cryptomgr_test [ 7.035106] 1 lock held by cryptomgr_test/410: [ 7.039549] #0: (ptrval) (&drbg->drbg_mutex){+.+.}, at: drbg_instantiate+0x34/0x398 [ 7.048038] CPU: 9 PID: 410 Comm: cryptomgr_test Not tainted 4.17.0-rc6+ rockchip-linux#27 [ 7.068228] dump_backtrace+0x0/0x1c0 [ 7.071890] show_stack+0x24/0x30 [ 7.075208] dump_stack+0xb0/0xec [ 7.078523] ___might_sleep+0x160/0x238 [ 7.082360] skcipher_walk_done+0x118/0x2c8 [ 7.086545] ctr_encrypt+0x98/0x130 [ 7.090035] simd_skcipher_encrypt+0x68/0xc0 [ 7.094304] drbg_kcapi_sym_ctr+0xd4/0x1f8 [ 7.098400] drbg_ctr_update+0x98/0x330 [ 7.102236] drbg_seed+0x1b8/0x2f0 [ 7.105637] drbg_instantiate+0x2ac/0x398 [ 7.109646] drbg_kcapi_seed+0xbc/0x188 [ 7.113482] crypto_rng_reset+0x4c/0xb0 [ 7.117319] alg_test_drbg+0xec/0x330 [ 7.120981] alg_test.part.6+0x1c8/0x3c8 [ 7.124903] alg_test+0x58/0xa0 [ 7.128044] cryptomgr_test+0x50/0x58 [ 7.131708] kthread+0x134/0x138 [ 7.134936] ret_from_fork+0x10/0x1c Seems there is a bug in Ard Biesheuvel's commit. Fixes: 6833817 ("crypto: arm64/aes-blk - move kernel mode neon en/disable into loop") [1] https://www.spinics.net/lists/linux-crypto/msg33103.html Signed-off-by: jia.he@hxt-semitech.com Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: <stable@vger.kernel.org> # 4.17 Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

lockdep spotted that we are using rfs_h.lock in enic_get_rxnfc() without initializing. rfs_h.lock is initialized in enic_open(). But ethtool_ops can be called when interface is down. Move enic_rfs_flw_tbl_init to enic_probe. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 18 PID: 1189 Comm: ethtool Not tainted 4.17.0-rc7-devel+ rockchip-linux#27 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 Call Trace: dump_stack+0x85/0xc0 register_lock_class+0x550/0x560 ? __handle_mm_fault+0xa8b/0x1100 __lock_acquire+0x81/0x670 lock_acquire+0xb9/0x1e0 ? enic_get_rxnfc+0x139/0x2b0 [enic] _raw_spin_lock_bh+0x38/0x80 ? enic_get_rxnfc+0x139/0x2b0 [enic] enic_get_rxnfc+0x139/0x2b0 [enic] ethtool_get_rxnfc+0x8d/0x1c0 dev_ethtool+0x16c8/0x2400 ? __mutex_lock+0x64d/0xa00 ? dev_load+0x6a/0x150 dev_ioctl+0x253/0x4b0 sock_do_ioctl+0x9a/0x130 sock_ioctl+0x1af/0x350 do_vfs_ioctl+0x8e/0x670 ? syscall_trace_enter+0x1e2/0x380 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x5a/0x170 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>

Crash dump shows following instructions crash> bt PID: 0 TASK: ffffffffbe412480 CPU: 0 COMMAND: "swapper/0" #0 [ffff891ee0003868] machine_kexec at ffffffffbd063ef1 FireflyTeam#1 [ffff891ee00038c8] __crash_kexec at ffffffffbd12b6f2 FireflyTeam#2 [ffff891ee0003998] crash_kexec at ffffffffbd12c84c FireflyTeam#3 [ffff891ee00039b8] oops_end at ffffffffbd030f0a FireflyTeam#4 [ffff891ee00039e0] no_context at ffffffffbd074643 FireflyTeam#5 [ffff891ee0003a40] __bad_area_nosemaphore at ffffffffbd07496e FireflyTeam#6 [ffff891ee0003a90] bad_area_nosemaphore at ffffffffbd074a64 FireflyTeam#7 [ffff891ee0003aa0] __do_page_fault at ffffffffbd074b0a FireflyTeam#8 [ffff891ee0003b18] do_page_fault at ffffffffbd074fc8 FireflyTeam#9 [ffff891ee0003b50] page_fault at ffffffffbda01925 [exception RIP: qlt_schedule_sess_for_deletion+15] RIP: ffffffffc02e526f RSP: ffff891ee0003c08 RFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffc0307847 RDX: 00000000000020e6 RSI: ffff891edbc377c8 RDI: 0000000000000000 RBP: ffff891ee0003c18 R8: ffffffffc02f0b20 R9: 0000000000000250 R10: 0000000000000258 R11: 000000000000b780 R12: ffff891ed9b43000 R13: 00000000000000f0 R14: 0000000000000006 R15: ffff891edbc377c8 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 FireflyTeam#10 [ffff891ee0003c20] qla2x00_fcport_event_handler at ffffffffc02853d3 [qla2xxx] FireflyTeam#11 [ffff891ee0003cf0] __dta_qla24xx_async_gnl_sp_done_333 at ffffffffc0285a1d [qla2xxx] FireflyTeam#12 [ffff891ee0003de8] qla24xx_process_response_queue at ffffffffc02a2eb5 [qla2xxx] FireflyTeam#13 [ffff891ee0003e88] qla24xx_msix_rsp_q at ffffffffc02a5403 [qla2xxx] FireflyTeam#14 [ffff891ee0003ec0] __handle_irq_event_percpu at ffffffffbd0f4c59 FireflyTeam#15 [ffff891ee0003f10] handle_irq_event_percpu at ffffffffbd0f4e02 FireflyTeam#16 [ffff891ee0003f40] handle_irq_event at ffffffffbd0f4e90 rockchip-linux#17 [ffff891ee0003f68] handle_edge_irq at ffffffffbd0f8984 rockchip-linux#18 [ffff891ee0003f88] handle_irq at ffffffffbd0305d5 rockchip-linux#19 [ffff891ee0003fb8] do_IRQ at ffffffffbda02a18 --- <IRQ stack> --- rockchip-linux#20 [ffffffffbe403d30] ret_from_intr at ffffffffbda0094e [exception RIP: unknown or invalid address] RIP: 000000000000001f RSP: 0000000000000000 RFLAGS: fff3b8c2091ebb3f RAX: ffffbba5a0000200 RBX: 0000be8cdfa8f9fa RCX: 0000000000000018 RDX: 0000000000000101 RSI: 000000000000015d RDI: 0000000000000193 RBP: 0000000000000083 R8: ffffffffbe403e38 R9: 0000000000000002 R10: 0000000000000000 R11: ffffffffbe56b820 R12: ffff891ee001cf00 R13: ffffffffbd11c0a4 R14: ffffffffbe403d60 R15: 0000000000000001 ORIG_RAX: ffff891ee0022ac0 CS: 0000 SS: ffffffffffffffb9 bt: WARNING: possibly bogus exception frame rockchip-linux#21 [ffffffffbe403dd8] cpuidle_enter_state at ffffffffbd67c6fd rockchip-linux#22 [ffffffffbe403e40] cpuidle_enter at ffffffffbd67c907 rockchip-linux#23 [ffffffffbe403e50] call_cpuidle at ffffffffbd0d98f3 rockchip-linux#24 [ffffffffbe403e60] do_idle at ffffffffbd0d9b42 rockchip-linux#25 [ffffffffbe403e98] cpu_startup_entry at ffffffffbd0d9da3 rockchip-linux#26 [ffffffffbe403ec0] rest_init at ffffffffbd81d4aa rockchip-linux#27 [ffffffffbe403ed0] start_kernel at ffffffffbe67d2ca rockchip-linux#28 [ffffffffbe403f28] x86_64_start_reservations at ffffffffbe67c675 rockchip-linux#29 [ffffffffbe403f38] x86_64_start_kernel at ffffffffbe67c6eb rockchip-linux#30 [ffffffffbe403f50] secondary_startup_64 at ffffffffbd0000d5 Fixes: 040036b ("scsi: qla2xxx: Delay loop id allocation at login") Cc: <stable@vger.kernel.org> # v4.17+ Signed-off-by: Chuck Anderson <chuck.anderson@oracle.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

[ Upstream commit 96298f6 ] According to Core Spec Version 5.2 | Vol 3, Part A 6.1.5, the incoming L2CAP_ConfigReq should be handled during OPEN state. The section below shows the btmon trace when running L2CAP/COS/CFD/BV-12-C before and after this change. === Before === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 #22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 #23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 #24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 #25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 #26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 #27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 #28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 #29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 #30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 #31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ...... < ACL Data TX: Handle 256 flags 0x00 dlen 14 #32 L2CAP: Command Reject (0x01) ident 3 len 6 Reason: Invalid CID in request (0x0002) Destination CID: 64 Source CID: 65 > HCI Event: Number of Completed Packets (0x13) plen 5 #33 Num handles: 1 Handle: 256 Count: 1 ... === After === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 #22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 #23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 #24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 #25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 #26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 #27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 #28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 #29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 #30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 #31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ..... < ACL Data TX: Handle 256 flags 0x00 dlen 18 #32 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 < ACL Data TX: Handle 256 flags 0x00 dlen 12 #33 L2CAP: Configure Request (0x04) ident 3 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 #34 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 #35 Num handles: 1 Handle: 256 Count: 1 ... Signed-off-by: Howard Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d5027ca ] Ritesh reported a bug [1] against UML, noting that it crashed on startup. The backtrace shows the following (heavily redacted): (gdb) bt ... rockchip-linux#26 0x0000000060015b5d in sem_init () at ipc/sem.c:268 rockchip-linux#27 0x00007f89906d92f7 in ?? () from /lib/x86_64-linux-gnu/libcom_err.so.2 rockchip-linux#28 0x00007f8990ab8fb2 in call_init (...) at dl-init.c:72 ... rockchip-linux#40 0x00007f89909bf3a6 in nss_load_library (...) at nsswitch.c:359 ... rockchip-linux#44 0x00007f8990895e35 in _nss_compat_getgrnam_r (...) at nss_compat/compat-grp.c:486 rockchip-linux#45 0x00007f8990968b85 in __getgrnam_r [...] rockchip-linux#46 0x00007f89909d6b77 in grantpt [...] rockchip-linux#47 0x00007f8990a9394e in __GI_openpty [...] rockchip-linux#48 0x00000000604a1f65 in openpty_cb (...) at arch/um/os-Linux/sigio.c:407 rockchip-linux#49 0x00000000604a58d0 in start_idle_thread (...) at arch/um/os-Linux/skas/process.c:598 rockchip-linux#50 0x0000000060004a3d in start_uml () at arch/um/kernel/skas/process.c:45 rockchip-linux#51 0x00000000600047b2 in linux_main (...) at arch/um/kernel/um_arch.c:334 rockchip-linux#52 0x000000006000574f in main (...) at arch/um/os-Linux/main.c:144 indicating that the UML function openpty_cb() calls openpty(), which internally calls __getgrnam_r(), which causes the nsswitch machinery to get started. This loads, through lots of indirection that I snipped, the libcom_err.so.2 library, which (in an unknown function, "??") calls sem_init(). Now, of course it wants to get libpthread's sem_init(), since it's linked against libpthread. However, the dynamic linker looks up that symbol against the binary first, and gets the kernel's sem_init(). Hajime Tazaki noted that "objcopy -L" can localize a symbol, so the dynamic linker wouldn't do the lookup this way. I tried, but for some reason that didn't seem to work. Doing the same thing in the linker script instead does seem to work, though I cannot entirely explain - it *also* works if I just add "VERSION { { global: *; }; }" instead, indicating that something else is happening that I don't really understand. It may be that explicitly doing that marks them with some kind of empty version, and that's different from the default. Explicitly marking them with a version breaks kallsyms, so that doesn't seem to be possible. Marking all the symbols as local seems correct, and does seem to address the issue, so do that. Also do it for static link, nsswitch libraries could still be loaded there. [1] https://bugs.debian.org/983379 Reported-by: Ritesh Raj Sarraf <rrs@debian.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com> Tested-By: Ritesh Raj Sarraf <rrs@debian.org> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>

jakob-tsd closed this as completed Jul 26, 2017

newcoderlife mentioned this issue Mar 6, 2019

RK3399 onboard Gigabit wired network card loses response #146

Closed

void285 mentioned this issue Mar 26, 2020

armbian无规律断网 hanwckf/build-beikeyun#7

Closed

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

rk3399: NETDEV WATCHDOG: eth0 (rk_gmac-dwmac): transmit queue 0 timed out #27

rk3399: NETDEV WATCHDOG: eth0 (rk_gmac-dwmac): transmit queue 0 timed out #27

jakob-tsd commented Jul 25, 2017

jakob-tsd commented Jul 26, 2017

wzyy2 commented Jul 26, 2017

jakob-tsd commented Jul 26, 2017

KevanLan commented Jul 26, 2017

jakob-tsd commented Jul 26, 2017

rk3399: NETDEV WATCHDOG: eth0 (rk_gmac-dwmac): transmit queue 0 timed out #27

rk3399: NETDEV WATCHDOG: eth0 (rk_gmac-dwmac): transmit queue 0 timed out #27

Comments

jakob-tsd commented Jul 25, 2017

jakob-tsd commented Jul 26, 2017

wzyy2 commented Jul 26, 2017

jakob-tsd commented Jul 26, 2017

KevanLan commented Jul 26, 2017

jakob-tsd commented Jul 26, 2017