USB 3.0 disconnect hangs USB subsystem #34
Comments
|
I'm facing the same problem, also on mainline kernel. |
|
Randomly seeing additional related issues of unhandled level 3 translation faults : [432893.072550] cat[11190]: unhandled level 3 translation fault (11) at 0x005017 This is after 5 days of uptime, running Motion 4.0.1 application. The USB drive is still responsive, but I can produce a similar failure by running lsusb. I changed to a different USB drive since the original posting. The new drive is a self powered 8TB Seagate Backup Plus. Also, the lsusb does not return anything but "Segmentation fault" The console error reported by lsusb is : |
wzyy2
pushed a commit
that referenced
this issue
Sep 22, 2017
[ Upstream commit bb1107f ] Andrey Konovalov has reported the following warning triggered by the syzkaller fuzzer. WARNING: CPU: 1 PID: 9935 at mm/page_alloc.c:3511 __alloc_pages_nodemask+0x159c/0x1e20 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 9935 Comm: syz-executor0 Not tainted 4.9.0-rc7+ #34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __alloc_pages_slowpath mm/page_alloc.c:3511 __alloc_pages_nodemask+0x159c/0x1e20 mm/page_alloc.c:3781 alloc_pages_current+0x1c7/0x6b0 mm/mempolicy.c:2072 alloc_pages include/linux/gfp.h:469 kmalloc_order+0x1f/0x70 mm/slab_common.c:1015 kmalloc_order_trace+0x1f/0x160 mm/slab_common.c:1026 kmalloc_large include/linux/slab.h:422 __kmalloc+0x210/0x2d0 mm/slub.c:3723 kmalloc include/linux/slab.h:495 ep_write_iter+0x167/0xb50 drivers/usb/gadget/legacy/inode.c:664 new_sync_write fs/read_write.c:499 __vfs_write+0x483/0x760 fs/read_write.c:512 vfs_write+0x170/0x4e0 fs/read_write.c:560 SYSC_write fs/read_write.c:607 SyS_write+0xfb/0x230 fs/read_write.c:599 entry_SYSCALL_64_fastpath+0x1f/0xc2 The issue is caused by a lack of size check for the request size in ep_write_iter which should be fixed. It, however, points to another problem, that SLUB defines KMALLOC_MAX_SIZE too large because the its KMALLOC_SHIFT_MAX is (MAX_ORDER + PAGE_SHIFT) which means that the resulting page allocator request might be MAX_ORDER which is too large (see __alloc_pages_slowpath). The same applies to the SLOB allocator which allows even larger sizes. Make sure that they are capped properly and never request more than MAX_ORDER order. Link: http://lkml.kernel.org/r/20161220130659.16461-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
@wzyy2 does this solve problem with USB3 unable to change link state? It seems that this solves some other problem |
|
No.... It's just auto referenced by github... |
|
OK. Thanks :) Do you have some idea why the usb fails? |
liuqsqq
pushed a commit
to liuqsqq/kernel-rokchip
that referenced
this issue
Jan 20, 2018
commit 0a8fd13 upstream. When checking a new device's descriptors, the USB core does not check for duplicate endpoint addresses. This can cause a problem when the sysfs files for those endpoints are created; trying to create multiple files with the same name will provoke a WARNING: WARNING: CPU: 2 PID: 865 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x8a/0xa0 sysfs: cannot create duplicate filename '/devices/platform/dummy_hcd.0/usb2/2-1/2-1:64.0/ep_05' Kernel panic - not syncing: panic_on_warn set ... CPU: 2 PID: 865 Comm: kworker/2:1 Not tainted 4.9.0-rc7+ rockchip-linux#34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event ffff88006bee64c8 ffffffff81f96b8a ffffffff00000001 1ffff1000d7dcc2c ffffed000d7dcc24 0000000000000001 0000000041b58ab3 ffffffff8598b510 ffffffff81f968f8 ffffffff850fee20 ffffffff85cff020 dffffc0000000000 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff81f96b8a>] dump_stack+0x292/0x398 lib/dump_stack.c:51 [<ffffffff8168c88e>] panic+0x1cb/0x3a9 kernel/panic.c:179 [<ffffffff812b80b4>] __warn+0x1c4/0x1e0 kernel/panic.c:542 [<ffffffff812b8195>] warn_slowpath_fmt+0xc5/0x110 kernel/panic.c:565 [<ffffffff819e70ca>] sysfs_warn_dup+0x8a/0xa0 fs/sysfs/dir.c:30 [<ffffffff819e7308>] sysfs_create_dir_ns+0x178/0x1d0 fs/sysfs/dir.c:59 [< inline >] create_dir lib/kobject.c:71 [<ffffffff81fa1b07>] kobject_add_internal+0x227/0xa60 lib/kobject.c:229 [< inline >] kobject_add_varg lib/kobject.c:366 [<ffffffff81fa2479>] kobject_add+0x139/0x220 lib/kobject.c:411 [<ffffffff82737a63>] device_add+0x353/0x1660 drivers/base/core.c:1088 [<ffffffff82738d8d>] device_register+0x1d/0x20 drivers/base/core.c:1206 [<ffffffff82cb77d3>] usb_create_ep_devs+0x163/0x260 drivers/usb/core/endpoint.c:195 [<ffffffff82c9f27b>] create_intf_ep_devs+0x13b/0x200 drivers/usb/core/message.c:1030 [<ffffffff82ca39d3>] usb_set_configuration+0x1083/0x18d0 drivers/usb/core/message.c:1937 [<ffffffff82cc9e2e>] generic_probe+0x6e/0xe0 drivers/usb/core/generic.c:172 [<ffffffff82caa7fa>] usb_probe_device+0xaa/0xe0 drivers/usb/core/driver.c:263 This patch prevents the problem by checking for duplicate endpoint addresses during enumeration and skipping any duplicates. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kwiboo
referenced
this issue
in Kwiboo/linux-rockchip
Mar 12, 2018
The tunnel socket tunnel->sock (struct sock) is accessed when preparing a new ppp session on a tunnel at pppol2tp_session_init. If the socket is closed by a thread while another is creating a new session, the threads race. In pppol2tp_connect, the tunnel object may be created if the pppol2tp socket is associated with the special session_id 0 and the tunnel socket is looked up using the provided fd. When handling this, pppol2tp_connect cannot sock_hold the tunnel socket to prevent it being destroyed during pppol2tp_connect since this may itself may race with the socket being destroyed. Doing sockfd_lookup in pppol2tp_connect isn't sufficient to prevent tunnel->sock going away either because a given tunnel socket fd may be reused between calls to pppol2tp_connect. Instead, have l2tp_tunnel_create sock_hold the tunnel socket before it does sockfd_put. This ensures that the tunnel's socket is always extant while the tunnel object exists. Hold a ref on the socket until the tunnel is destroyed and ensure that all tunnel destroy paths go through a common function (l2tp_tunnel_delete) since this will do the final sock_put to release the tunnel socket. Since the tunnel's socket is now guaranteed to exist if the tunnel exists, we no longer need to use sockfd_lookup via l2tp_sock_to_tunnel to derive the tunnel from the socket since this is always sk_user_data. Also, sessions no longer sock_hold the tunnel socket since sessions already hold a tunnel ref and the tunnel sock will not be freed until the tunnel is freed. Removing these sock_holds in l2tp_session_register avoids a possible sock leak in the pppol2tp_connect error path if l2tp_session_register succeeds but attaching a ppp channel fails. The pppol2tp_connect error path could have been fixed instead and have the sock ref dropped when the session is freed, but doing a sock_put of the tunnel socket when the session is freed would require a new session_free callback. It is simpler to just remove the sock_hold of the tunnel socket in l2tp_session_register, now that the tunnel socket lifetime is guaranteed. Finally, some init code in l2tp_tunnel_create is reordered to ensure that the new tunnel object's refcount is set and the tunnel socket ref is taken before the tunnel socket destructor callbacks are set. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 0 PID: 4360 Comm: syzbot_19c09769 Not tainted 4.16.0-rc2+ #34 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 RIP: 0010:pppol2tp_session_init+0x1d6/0x500 RSP: 0018:ffff88001377fb40 EFLAGS: 00010212 RAX: dffffc0000000000 RBX: ffff88001636a940 RCX: ffffffff84836c1d RDX: 0000000000000045 RSI: 0000000055976744 RDI: 0000000000000228 RBP: ffff88001377fb60 R08: ffffffff84836bc8 R09: 0000000000000002 R10: ffff88001377fab8 R11: 0000000000000001 R12: 0000000000000000 R13: ffff88001636aac8 R14: ffff8800160f81c0 R15: 1ffff100026eff76 FS: 00007ffb3ea66700(0000) GS:ffff88001a400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020e77000 CR3: 0000000016261000 CR4: 00000000000006f0 Call Trace: pppol2tp_connect+0xd18/0x13c0 ? pppol2tp_session_create+0x170/0x170 ? __might_fault+0x115/0x1d0 ? lock_downgrade+0x860/0x860 ? __might_fault+0xe5/0x1d0 ? security_socket_connect+0x8e/0xc0 SYSC_connect+0x1b6/0x310 ? SYSC_bind+0x280/0x280 ? __do_page_fault+0x5d1/0xca0 ? up_read+0x1f/0x40 ? __do_page_fault+0x3c8/0xca0 SyS_connect+0x29/0x30 ? SyS_accept+0x40/0x40 do_syscall_64+0x1e0/0x730 ? trace_hardirqs_off_thunk+0x1a/0x1c entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x7ffb3e376259 RSP: 002b:00007ffeda4f6508 EFLAGS: 00000202 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000020e77012 RCX: 00007ffb3e376259 RDX: 000000000000002e RSI: 0000000020e77000 RDI: 0000000000000004 RBP: 00007ffeda4f6540 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000400b60 R13: 00007ffeda4f6660 R14: 0000000000000000 R15: 0000000000000000 Code: 80 3d b0 ff 06 02 00 0f 84 07 02 00 00 e8 13 d6 db fc 49 8d bc 24 28 02 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 f a 48 c1 ea 03 <80> 3c 02 00 0f 85 ed 02 00 00 4d 8b a4 24 28 02 00 00 e8 13 16 Fixes: 80d84ef ("l2tp: prevent l2tp_tunnel_delete racing with userspace close") Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
@wzyy2 we still have this problem, it seems that for whatever reason the USB3 PHY is not being properly reset after soft reboot. |
rkchrome
pushed a commit
that referenced
this issue
Jun 11, 2018
commit 2975d5d upstream. Garbage supplied by user will cause to UCMA module provide zero memory size for memcpy(), because it wasn't checked, it will produce unpredictable results in rdma_resolve_addr(). [ 42.873814] BUG: KASAN: null-ptr-deref in rdma_resolve_addr+0xc8/0xfb0 [ 42.874816] Write of size 28 at addr 00000000000000a0 by task resaddr/1044 [ 42.876765] [ 42.876960] CPU: 1 PID: 1044 Comm: resaddr Not tainted 4.16.0-rc1-00057-gaa56a5293d7e #34 [ 42.877840] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 [ 42.879691] Call Trace: [ 42.880236] dump_stack+0x5c/0x77 [ 42.880664] kasan_report+0x163/0x380 [ 42.881354] ? rdma_resolve_addr+0xc8/0xfb0 [ 42.881864] memcpy+0x34/0x50 [ 42.882692] rdma_resolve_addr+0xc8/0xfb0 [ 42.883366] ? deref_stack_reg+0x88/0xd0 [ 42.883856] ? vsnprintf+0x31a/0x770 [ 42.884686] ? rdma_bind_addr+0xc40/0xc40 [ 42.885327] ? num_to_str+0x130/0x130 [ 42.885773] ? deref_stack_reg+0x88/0xd0 [ 42.886217] ? __read_once_size_nocheck.constprop.6+0x10/0x10 [ 42.887698] ? unwind_get_return_address_ptr+0x50/0x50 [ 42.888302] ? replace_slot+0x147/0x170 [ 42.889176] ? delete_node+0x12c/0x340 [ 42.890223] ? __radix_tree_lookup+0xa9/0x160 [ 42.891196] ? ucma_resolve_ip+0xb7/0x110 [ 42.891917] ucma_resolve_ip+0xb7/0x110 [ 42.893003] ? ucma_resolve_addr+0x190/0x190 [ 42.893531] ? _copy_from_user+0x5e/0x90 [ 42.894204] ucma_write+0x174/0x1f0 [ 42.895162] ? ucma_resolve_route+0xf0/0xf0 [ 42.896309] ? dequeue_task_fair+0x67e/0xd90 [ 42.897192] ? put_prev_entity+0x7d/0x170 [ 42.897870] ? ring_buffer_record_is_on+0xd/0x20 [ 42.898439] ? tracing_record_taskinfo_skip+0x20/0x50 [ 42.899686] __vfs_write+0xc4/0x350 [ 42.900142] ? kernel_read+0xa0/0xa0 [ 42.900602] ? firmware_map_remove+0xdf/0xdf [ 42.901135] ? do_task_dead+0x5d/0x60 [ 42.901598] ? do_exit+0xcc6/0x1220 [ 42.902789] ? __fget+0xa8/0xf0 [ 42.903190] vfs_write+0xf7/0x280 [ 42.903600] SyS_write+0xa1/0x120 [ 42.904206] ? SyS_read+0x120/0x120 [ 42.905710] ? compat_start_thread+0x60/0x60 [ 42.906423] ? SyS_read+0x120/0x120 [ 42.908716] do_syscall_64+0xeb/0x250 [ 42.910760] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 42.912735] RIP: 0033:0x7f138b0afe99 [ 42.914734] RSP: 002b:00007f138b799e98 EFLAGS: 00000287 ORIG_RAX: 0000000000000001 [ 42.917134] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f138b0afe99 [ 42.919487] RDX: 000000000000002e RSI: 0000000020000c40 RDI: 0000000000000004 [ 42.922393] RBP: 00007f138b799ec0 R08: 00007f138b79a700 R09: 0000000000000000 [ 42.925266] R10: 00007f138b79a700 R11: 0000000000000287 R12: 00007f138b799fc0 [ 42.927570] R13: 0000000000000000 R14: 00007ffdbae757c0 R15: 00007f138b79a9c0 [ 42.930047] [ 42.932681] Disabling lock debugging due to kernel taint [ 42.934795] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0 [ 42.936939] IP: memcpy_erms+0x6/0x10 [ 42.938864] PGD 80000001bea92067 P4D 80000001bea92067 PUD 1bea96067 PMD 0 [ 42.941576] Oops: 0002 [#1] SMP KASAN PTI [ 42.943952] CPU: 1 PID: 1044 Comm: resaddr Tainted: G B 4.16.0-rc1-00057-gaa56a5293d7e #34 [ 42.946964] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 [ 42.952336] RIP: 0010:memcpy_erms+0x6/0x10 [ 42.954707] RSP: 0018:ffff8801c8b479c8 EFLAGS: 00010286 [ 42.957227] RAX: 00000000000000a0 RBX: ffff8801c8b47ba0 RCX: 000000000000001c [ 42.960543] RDX: 000000000000001c RSI: ffff8801c8b47bbc RDI: 00000000000000a0 [ 42.963867] RBP: ffff8801c8b47b60 R08: 0000000000000000 R09: ffffed0039168ed1 [ 42.967303] R10: 0000000000000001 R11: ffffed0039168ed0 R12: ffff8801c8b47bbc [ 42.970685] R13: 00000000000000a0 R14: 1ffff10039168f4a R15: 0000000000000000 [ 42.973631] FS: 00007f138b79a700(0000) GS:ffff8801e5d00000(0000) knlGS:0000000000000000 [ 42.976831] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 42.979239] CR2: 00000000000000a0 CR3: 00000001be908002 CR4: 00000000003606a0 [ 42.982060] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 42.984877] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 42.988033] Call Trace: [ 42.990487] rdma_resolve_addr+0xc8/0xfb0 [ 42.993202] ? deref_stack_reg+0x88/0xd0 [ 42.996055] ? vsnprintf+0x31a/0x770 [ 42.998707] ? rdma_bind_addr+0xc40/0xc40 [ 43.000985] ? num_to_str+0x130/0x130 [ 43.003410] ? deref_stack_reg+0x88/0xd0 [ 43.006302] ? __read_once_size_nocheck.constprop.6+0x10/0x10 [ 43.008780] ? unwind_get_return_address_ptr+0x50/0x50 [ 43.011178] ? replace_slot+0x147/0x170 [ 43.013517] ? delete_node+0x12c/0x340 [ 43.016019] ? __radix_tree_lookup+0xa9/0x160 [ 43.018755] ? ucma_resolve_ip+0xb7/0x110 [ 43.021270] ucma_resolve_ip+0xb7/0x110 [ 43.023968] ? ucma_resolve_addr+0x190/0x190 [ 43.026312] ? _copy_from_user+0x5e/0x90 [ 43.029384] ucma_write+0x174/0x1f0 [ 43.031861] ? ucma_resolve_route+0xf0/0xf0 [ 43.034782] ? dequeue_task_fair+0x67e/0xd90 [ 43.037483] ? put_prev_entity+0x7d/0x170 [ 43.040215] ? ring_buffer_record_is_on+0xd/0x20 [ 43.042990] ? tracing_record_taskinfo_skip+0x20/0x50 [ 43.045595] __vfs_write+0xc4/0x350 [ 43.048624] ? kernel_read+0xa0/0xa0 [ 43.051604] ? firmware_map_remove+0xdf/0xdf [ 43.055379] ? do_task_dead+0x5d/0x60 [ 43.058000] ? do_exit+0xcc6/0x1220 [ 43.060783] ? __fget+0xa8/0xf0 [ 43.063133] vfs_write+0xf7/0x280 [ 43.065677] SyS_write+0xa1/0x120 [ 43.068647] ? SyS_read+0x120/0x120 [ 43.071179] ? compat_start_thread+0x60/0x60 [ 43.074025] ? SyS_read+0x120/0x120 [ 43.076705] do_syscall_64+0xeb/0x250 [ 43.079006] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 43.081606] RIP: 0033:0x7f138b0afe99 [ 43.083679] RSP: 002b:00007f138b799e98 EFLAGS: 00000287 ORIG_RAX: 0000000000000001 [ 43.086802] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f138b0afe99 [ 43.089989] RDX: 000000000000002e RSI: 0000000020000c40 RDI: 0000000000000004 [ 43.092866] RBP: 00007f138b799ec0 R08: 00007f138b79a700 R09: 0000000000000000 [ 43.096233] R10: 00007f138b79a700 R11: 0000000000000287 R12: 00007f138b799fc0 [ 43.098913] R13: 0000000000000000 R14: 00007ffdbae757c0 R15: 00007f138b79a9c0 [ 43.101809] Code: 90 90 90 90 90 eb 1e 0f 1f 00 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 <f3> a4 c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e 40 38 [ 43.107950] RIP: memcpy_erms+0x6/0x10 RSP: ffff8801c8b479c8 Reported-by: <syzbot+1d8c43206853b369d00c@syzkaller.appspotmail.com> Fixes: 7521663 ("RDMA/cma: Export rdma cm interface to userspace") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
@wzyy2 @keveryang We are still seeing these problems, for example here: ayufan-rock64/linux-build#112 |
|
Might be this one could help: https://e2e.ti.com/support/dsp/c6000_multi-core_dsps/f/639/t/550846?USB-3-port-file-copy-leads-to-kernel-Panic-with-Processor-SDK Can't verify that as I don't know Linux architecture. |
0lvin
pushed a commit
to free-z4u/roc-rk3328-cc-official
that referenced
this issue
Jun 16, 2019
When checking a new device's descriptors, the USB core does not check for duplicate endpoint addresses. This can cause a problem when the sysfs files for those endpoints are created; trying to create multiple files with the same name will provoke a WARNING: WARNING: CPU: 2 PID: 865 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x8a/0xa0 sysfs: cannot create duplicate filename '/devices/platform/dummy_hcd.0/usb2/2-1/2-1:64.0/ep_05' Kernel panic - not syncing: panic_on_warn set ... CPU: 2 PID: 865 Comm: kworker/2:1 Not tainted 4.9.0-rc7+ rockchip-linux#34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event ffff88006bee64c8 ffffffff81f96b8a ffffffff00000001 1ffff1000d7dcc2c ffffed000d7dcc24 0000000000000001 0000000041b58ab3 ffffffff8598b510 ffffffff81f968f8 ffffffff850fee20 ffffffff85cff020 dffffc0000000000 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff81f96b8a>] dump_stack+0x292/0x398 lib/dump_stack.c:51 [<ffffffff8168c88e>] panic+0x1cb/0x3a9 kernel/panic.c:179 [<ffffffff812b80b4>] __warn+0x1c4/0x1e0 kernel/panic.c:542 [<ffffffff812b8195>] warn_slowpath_fmt+0xc5/0x110 kernel/panic.c:565 [<ffffffff819e70ca>] sysfs_warn_dup+0x8a/0xa0 fs/sysfs/dir.c:30 [<ffffffff819e7308>] sysfs_create_dir_ns+0x178/0x1d0 fs/sysfs/dir.c:59 [< inline >] create_dir lib/kobject.c:71 [<ffffffff81fa1b07>] kobject_add_internal+0x227/0xa60 lib/kobject.c:229 [< inline >] kobject_add_varg lib/kobject.c:366 [<ffffffff81fa2479>] kobject_add+0x139/0x220 lib/kobject.c:411 [<ffffffff82737a63>] device_add+0x353/0x1660 drivers/base/core.c:1088 [<ffffffff82738d8d>] device_register+0x1d/0x20 drivers/base/core.c:1206 [<ffffffff82cb77d3>] usb_create_ep_devs+0x163/0x260 drivers/usb/core/endpoint.c:195 [<ffffffff82c9f27b>] create_intf_ep_devs+0x13b/0x200 drivers/usb/core/message.c:1030 [<ffffffff82ca39d3>] usb_set_configuration+0x1083/0x18d0 drivers/usb/core/message.c:1937 [<ffffffff82cc9e2e>] generic_probe+0x6e/0xe0 drivers/usb/core/generic.c:172 [<ffffffff82caa7fa>] usb_probe_device+0xaa/0xe0 drivers/usb/core/driver.c:263 This patch prevents the problem by checking for duplicate endpoint addresses during enumeration and skipping any duplicates. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
0lvin
pushed a commit
to free-z4u/roc-rk3328-cc-official
that referenced
this issue
Jun 16, 2019
Andrey Konovalov has reported the following warning triggered by the syzkaller fuzzer. WARNING: CPU: 1 PID: 9935 at mm/page_alloc.c:3511 __alloc_pages_nodemask+0x159c/0x1e20 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 9935 Comm: syz-executor0 Not tainted 4.9.0-rc7+ rockchip-linux#34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __alloc_pages_slowpath mm/page_alloc.c:3511 __alloc_pages_nodemask+0x159c/0x1e20 mm/page_alloc.c:3781 alloc_pages_current+0x1c7/0x6b0 mm/mempolicy.c:2072 alloc_pages include/linux/gfp.h:469 kmalloc_order+0x1f/0x70 mm/slab_common.c:1015 kmalloc_order_trace+0x1f/0x160 mm/slab_common.c:1026 kmalloc_large include/linux/slab.h:422 __kmalloc+0x210/0x2d0 mm/slub.c:3723 kmalloc include/linux/slab.h:495 ep_write_iter+0x167/0xb50 drivers/usb/gadget/legacy/inode.c:664 new_sync_write fs/read_write.c:499 __vfs_write+0x483/0x760 fs/read_write.c:512 vfs_write+0x170/0x4e0 fs/read_write.c:560 SYSC_write fs/read_write.c:607 SyS_write+0xfb/0x230 fs/read_write.c:599 entry_SYSCALL_64_fastpath+0x1f/0xc2 The issue is caused by a lack of size check for the request size in ep_write_iter which should be fixed. It, however, points to another problem, that SLUB defines KMALLOC_MAX_SIZE too large because the its KMALLOC_SHIFT_MAX is (MAX_ORDER + PAGE_SHIFT) which means that the resulting page allocator request might be MAX_ORDER which is too large (see __alloc_pages_slowpath). The same applies to the SLOB allocator which allows even larger sizes. Make sure that they are capped properly and never request more than MAX_ORDER order. Link: http://lkml.kernel.org/r/20161220130659.16461-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
0lvin
pushed a commit
to free-z4u/roc-rk3328-cc-official
that referenced
this issue
Jul 18, 2019
Both q->mq_kobj and sw queues' kobjects should have been initialized once, instead of doing that each add_disk context. Also this patch removes clearing of ctx in blk_mq_init_cpu_queues() because percpu allocator fills zero to allocated variable. This patch fixes one issue[1] reported from Omar. [1] kernel wearning when doing unbind/bind on one scsi-mq device [ 19.347924] kobject (ffff8800791ea0b8): tried to init an initialized object, something is seriously wrong. [ 19.349781] CPU: 1 PID: 84 Comm: kworker/u8:1 Not tainted 4.10.0-rc7-00210-g53f39eeaa263 rockchip-linux#34 [ 19.350686] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.1-20161122_114906-anatol 04/01/2014 [ 19.350920] Workqueue: events_unbound async_run_entry_fn [ 19.350920] Call Trace: [ 19.350920] dump_stack+0x63/0x83 [ 19.350920] kobject_init+0x77/0x90 [ 19.350920] blk_mq_register_dev+0x40/0x130 [ 19.350920] blk_register_queue+0xb6/0x190 [ 19.350920] device_add_disk+0x1ec/0x4b0 [ 19.350920] sd_probe_async+0x10d/0x1c0 [sd_mod] [ 19.350920] async_run_entry_fn+0x48/0x150 [ 19.350920] process_one_work+0x1d0/0x480 [ 19.350920] worker_thread+0x48/0x4e0 [ 19.350920] kthread+0x101/0x140 [ 19.350920] ? process_one_work+0x480/0x480 [ 19.350920] ? kthread_create_on_node+0x60/0x60 [ 19.350920] ret_from_fork+0x2c/0x40 Cc: Omar Sandoval <osandov@osandov.com> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@fb.com>
0lvin
pushed a commit
to free-z4u/roc-rk3328-cc-official
that referenced
this issue
Aug 3, 2019
Correct these checkpatch.pl warnings: |WARNING: Block comments use * on subsequent lines |rockchip-linux#34: FILE: include/linux/bug.h:34: |+/* Force a compilation error if condition is true, but also produce a |+ result (of value 0 and type size_t), so the expression can be used |WARNING: Block comments use a trailing */ on a separate line |rockchip-linux#36: FILE: include/linux/bug.h:36: |+ aren't permitted). */ Link: http://lkml.kernel.org/r/20170525120316.24473-3-abbotti@mev.co.uk Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Acked-by: Michal Nazarewicz <mina86@mina86.com> Cc: Kees Cook <keescook@chromium.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
0lvin
pushed a commit
to free-z4u/roc-rk3328-cc-official
that referenced
this issue
Aug 26, 2019
This allows MSR[EE]=0 lockups to be detected on an OPAL (bare metal) system similarly to the hcall NMI IPI on pseries guests, when the platform/firmware supports it. This is an example of CPU10 spinning with interrupts hard disabled: Watchdog CPU:32 detected Hard LOCKUP other CPUS:10 Watchdog CPU:10 Hard LOCKUP CPU: 10 PID: 4410 Comm: bash Not tainted 4.13.0-rc7-00074-ge89ce1f89f62-dirty rockchip-linux#34 task: c0000003a82b4400 task.stack: c0000003af55c000 NIP: c0000000000a7b38 LR: c000000000659044 CTR: c0000000000a7b00 REGS: c00000000fd23d80 TRAP: 0100 Not tainted (4.13.0-rc7-00074-ge89ce1f89f62-dirty) MSR: 90000000000c1033 <SF,HV,ME,IR,DR,RI,LE> CR: 28422222 XER: 20000000 CFAR: c0000000000a7b38 SOFTE: 0 GPR00: c000000000659044 c0000003af55fbb0 c000000001072a00 0000000000000078 GPR04: c0000003c81b5c80 c0000003c81cc7e8 9000000000009033 0000000000000000 GPR08: 0000000000000000 c0000000000a7b00 0000000000000001 9000000000001003 GPR12: c0000000000a7b00 c00000000fd83200 0000000010180df8 0000000010189e60 GPR16: 0000000010189ed8 0000000010151270 000000001018bd88 000000001018de78 GPR20: 00000000370a0668 0000000000000001 00000000101645e0 0000000010163c10 GPR24: 00007fffd14d6294 00007fffd14d6290 c000000000fba6f0 0000000000000004 GPR28: c000000000f351d8 0000000000000078 c000000000f4095c 0000000000000000 NIP [c0000000000a7b38] sysrq_handle_xmon+0x38/0x40 LR [c000000000659044] __handle_sysrq+0xe4/0x270 Call Trace: [c0000003af55fbd0] [c000000000659044] __handle_sysrq+0xe4/0x270 [c0000003af55fc70] [c000000000659810] write_sysrq_trigger+0x70/0xa0 [c0000003af55fca0] [c0000000003da650] proc_reg_write+0xb0/0x110 [c0000003af55fcf0] [c0000000003423bc] __vfs_write+0x6c/0x1b0 [c0000003af55fd90] [c000000000344398] vfs_write+0xd8/0x240 [c0000003af55fde0] [c00000000034632c] SyS_write+0x6c/0x110 [c0000003af55fe30] [c00000000000b220] system_call+0x58/0x6c Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Use kernel types for opal_signal_system_reset()] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
0lvin
pushed a commit
to free-z4u/roc-rk3328-cc-official
that referenced
this issue
Sep 14, 2019
Garbage supplied by user will cause to UCMA module provide zero memory size for memcpy(), because it wasn't checked, it will produce unpredictable results in rdma_resolve_addr(). [ 42.873814] BUG: KASAN: null-ptr-deref in rdma_resolve_addr+0xc8/0xfb0 [ 42.874816] Write of size 28 at addr 00000000000000a0 by task resaddr/1044 [ 42.876765] [ 42.876960] CPU: 1 PID: 1044 Comm: resaddr Not tainted 4.16.0-rc1-00057-gaa56a5293d7e rockchip-linux#34 [ 42.877840] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 [ 42.879691] Call Trace: [ 42.880236] dump_stack+0x5c/0x77 [ 42.880664] kasan_report+0x163/0x380 [ 42.881354] ? rdma_resolve_addr+0xc8/0xfb0 [ 42.881864] memcpy+0x34/0x50 [ 42.882692] rdma_resolve_addr+0xc8/0xfb0 [ 42.883366] ? deref_stack_reg+0x88/0xd0 [ 42.883856] ? vsnprintf+0x31a/0x770 [ 42.884686] ? rdma_bind_addr+0xc40/0xc40 [ 42.885327] ? num_to_str+0x130/0x130 [ 42.885773] ? deref_stack_reg+0x88/0xd0 [ 42.886217] ? __read_once_size_nocheck.constprop.6+0x10/0x10 [ 42.887698] ? unwind_get_return_address_ptr+0x50/0x50 [ 42.888302] ? replace_slot+0x147/0x170 [ 42.889176] ? delete_node+0x12c/0x340 [ 42.890223] ? __radix_tree_lookup+0xa9/0x160 [ 42.891196] ? ucma_resolve_ip+0xb7/0x110 [ 42.891917] ucma_resolve_ip+0xb7/0x110 [ 42.893003] ? ucma_resolve_addr+0x190/0x190 [ 42.893531] ? _copy_from_user+0x5e/0x90 [ 42.894204] ucma_write+0x174/0x1f0 [ 42.895162] ? ucma_resolve_route+0xf0/0xf0 [ 42.896309] ? dequeue_task_fair+0x67e/0xd90 [ 42.897192] ? put_prev_entity+0x7d/0x170 [ 42.897870] ? ring_buffer_record_is_on+0xd/0x20 [ 42.898439] ? tracing_record_taskinfo_skip+0x20/0x50 [ 42.899686] __vfs_write+0xc4/0x350 [ 42.900142] ? kernel_read+0xa0/0xa0 [ 42.900602] ? firmware_map_remove+0xdf/0xdf [ 42.901135] ? do_task_dead+0x5d/0x60 [ 42.901598] ? do_exit+0xcc6/0x1220 [ 42.902789] ? __fget+0xa8/0xf0 [ 42.903190] vfs_write+0xf7/0x280 [ 42.903600] SyS_write+0xa1/0x120 [ 42.904206] ? SyS_read+0x120/0x120 [ 42.905710] ? compat_start_thread+0x60/0x60 [ 42.906423] ? SyS_read+0x120/0x120 [ 42.908716] do_syscall_64+0xeb/0x250 [ 42.910760] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 42.912735] RIP: 0033:0x7f138b0afe99 [ 42.914734] RSP: 002b:00007f138b799e98 EFLAGS: 00000287 ORIG_RAX: 0000000000000001 [ 42.917134] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f138b0afe99 [ 42.919487] RDX: 000000000000002e RSI: 0000000020000c40 RDI: 0000000000000004 [ 42.922393] RBP: 00007f138b799ec0 R08: 00007f138b79a700 R09: 0000000000000000 [ 42.925266] R10: 00007f138b79a700 R11: 0000000000000287 R12: 00007f138b799fc0 [ 42.927570] R13: 0000000000000000 R14: 00007ffdbae757c0 R15: 00007f138b79a9c0 [ 42.930047] [ 42.932681] Disabling lock debugging due to kernel taint [ 42.934795] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0 [ 42.936939] IP: memcpy_erms+0x6/0x10 [ 42.938864] PGD 80000001bea92067 P4D 80000001bea92067 PUD 1bea96067 PMD 0 [ 42.941576] Oops: 0002 [FireflyTeam#1] SMP KASAN PTI [ 42.943952] CPU: 1 PID: 1044 Comm: resaddr Tainted: G B 4.16.0-rc1-00057-gaa56a5293d7e rockchip-linux#34 [ 42.946964] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 [ 42.952336] RIP: 0010:memcpy_erms+0x6/0x10 [ 42.954707] RSP: 0018:ffff8801c8b479c8 EFLAGS: 00010286 [ 42.957227] RAX: 00000000000000a0 RBX: ffff8801c8b47ba0 RCX: 000000000000001c [ 42.960543] RDX: 000000000000001c RSI: ffff8801c8b47bbc RDI: 00000000000000a0 [ 42.963867] RBP: ffff8801c8b47b60 R08: 0000000000000000 R09: ffffed0039168ed1 [ 42.967303] R10: 0000000000000001 R11: ffffed0039168ed0 R12: ffff8801c8b47bbc [ 42.970685] R13: 00000000000000a0 R14: 1ffff10039168f4a R15: 0000000000000000 [ 42.973631] FS: 00007f138b79a700(0000) GS:ffff8801e5d00000(0000) knlGS:0000000000000000 [ 42.976831] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 42.979239] CR2: 00000000000000a0 CR3: 00000001be908002 CR4: 00000000003606a0 [ 42.982060] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 42.984877] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 42.988033] Call Trace: [ 42.990487] rdma_resolve_addr+0xc8/0xfb0 [ 42.993202] ? deref_stack_reg+0x88/0xd0 [ 42.996055] ? vsnprintf+0x31a/0x770 [ 42.998707] ? rdma_bind_addr+0xc40/0xc40 [ 43.000985] ? num_to_str+0x130/0x130 [ 43.003410] ? deref_stack_reg+0x88/0xd0 [ 43.006302] ? __read_once_size_nocheck.constprop.6+0x10/0x10 [ 43.008780] ? unwind_get_return_address_ptr+0x50/0x50 [ 43.011178] ? replace_slot+0x147/0x170 [ 43.013517] ? delete_node+0x12c/0x340 [ 43.016019] ? __radix_tree_lookup+0xa9/0x160 [ 43.018755] ? ucma_resolve_ip+0xb7/0x110 [ 43.021270] ucma_resolve_ip+0xb7/0x110 [ 43.023968] ? ucma_resolve_addr+0x190/0x190 [ 43.026312] ? _copy_from_user+0x5e/0x90 [ 43.029384] ucma_write+0x174/0x1f0 [ 43.031861] ? ucma_resolve_route+0xf0/0xf0 [ 43.034782] ? dequeue_task_fair+0x67e/0xd90 [ 43.037483] ? put_prev_entity+0x7d/0x170 [ 43.040215] ? ring_buffer_record_is_on+0xd/0x20 [ 43.042990] ? tracing_record_taskinfo_skip+0x20/0x50 [ 43.045595] __vfs_write+0xc4/0x350 [ 43.048624] ? kernel_read+0xa0/0xa0 [ 43.051604] ? firmware_map_remove+0xdf/0xdf [ 43.055379] ? do_task_dead+0x5d/0x60 [ 43.058000] ? do_exit+0xcc6/0x1220 [ 43.060783] ? __fget+0xa8/0xf0 [ 43.063133] vfs_write+0xf7/0x280 [ 43.065677] SyS_write+0xa1/0x120 [ 43.068647] ? SyS_read+0x120/0x120 [ 43.071179] ? compat_start_thread+0x60/0x60 [ 43.074025] ? SyS_read+0x120/0x120 [ 43.076705] do_syscall_64+0xeb/0x250 [ 43.079006] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 43.081606] RIP: 0033:0x7f138b0afe99 [ 43.083679] RSP: 002b:00007f138b799e98 EFLAGS: 00000287 ORIG_RAX: 0000000000000001 [ 43.086802] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f138b0afe99 [ 43.089989] RDX: 000000000000002e RSI: 0000000020000c40 RDI: 0000000000000004 [ 43.092866] RBP: 00007f138b799ec0 R08: 00007f138b79a700 R09: 0000000000000000 [ 43.096233] R10: 00007f138b79a700 R11: 0000000000000287 R12: 00007f138b799fc0 [ 43.098913] R13: 0000000000000000 R14: 00007ffdbae757c0 R15: 00007f138b79a9c0 [ 43.101809] Code: 90 90 90 90 90 eb 1e 0f 1f 00 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 <f3> a4 c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e 40 38 [ 43.107950] RIP: memcpy_erms+0x6/0x10 RSP: ffff8801c8b479c8 Reported-by: <syzbot+1d8c43206853b369d00c@syzkaller.appspotmail.com> Fixes: 7521663 ("RDMA/cma: Export rdma cm interface to userspace") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
0lvin
pushed a commit
to free-z4u/roc-rk3328-cc-official
that referenced
this issue
Sep 28, 2019
syzbot reported a use-after-free in tls_sk_proto_close Add a boolean value to cleanup a bit this function. BUG: KASAN: use-after-free in tls_sk_proto_close+0x8ab/0x9c0 net/tls/tls_main.c:297 Read of size 1 at addr ffff8801ae40a858 by task syz-executor363/4503 CPU: 0 PID: 4503 Comm: syz-executor363 Not tainted 4.17.0-rc3+ rockchip-linux#34 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:430 tls_sk_proto_close+0x8ab/0x9c0 net/tls/tls_main.c:297 inet_release+0x104/0x1f0 net/ipv4/af_inet.c:427 inet6_release+0x50/0x70 net/ipv6/af_inet6.c:460 sock_release+0x96/0x1b0 net/socket.c:594 sock_close+0x16/0x20 net/socket.c:1149 __fput+0x34d/0x890 fs/file_table.c:209 ____fput+0x15/0x20 fs/file_table.c:243 task_work_run+0x1e4/0x290 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x1aee/0x2730 kernel/exit.c:865 do_group_exit+0x16f/0x430 kernel/exit.c:968 get_signal+0x886/0x1960 kernel/signal.c:2469 do_signal+0x98/0x2040 arch/x86/kernel/signal.c:810 exit_to_usermode_loop+0x28a/0x310 arch/x86/entry/common.c:162 prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline] syscall_return_slowpath arch/x86/entry/common.c:265 [inline] do_syscall_64+0x6ac/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4457b9 RSP: 002b:00007fdf4d766da8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca RAX: fffffffffffffe00 RBX: 00000000006dac3c RCX: 00000000004457b9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000006dac3c RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dac38 R13: 3692738801137283 R14: 6bf92c39443c4c1d R15: 0000000000000006 Allocated by task 4498: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553 kmem_cache_alloc_trace+0x152/0x780 mm/slab.c:3620 kmalloc include/linux/slab.h:512 [inline] kzalloc include/linux/slab.h:701 [inline] create_ctx net/tls/tls_main.c:521 [inline] tls_init+0x1f9/0xb00 net/tls/tls_main.c:633 tcp_set_ulp+0x1bc/0x520 net/ipv4/tcp_ulp.c:153 do_tcp_setsockopt.isra.39+0x44a/0x2600 net/ipv4/tcp.c:2588 tcp_setsockopt+0xc1/0xe0 net/ipv4/tcp.c:2893 sock_common_setsockopt+0x9a/0xe0 net/core/sock.c:3039 __sys_setsockopt+0x1bd/0x390 net/socket.c:1903 __do_sys_setsockopt net/socket.c:1914 [inline] __se_sys_setsockopt net/socket.c:1911 [inline] __x64_sys_setsockopt+0xbe/0x150 net/socket.c:1911 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 4503: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528 __cache_free mm/slab.c:3498 [inline] kfree+0xd9/0x260 mm/slab.c:3813 tls_sw_free_resources+0x2a3/0x360 net/tls/tls_sw.c:1037 tls_sk_proto_close+0x67c/0x9c0 net/tls/tls_main.c:288 inet_release+0x104/0x1f0 net/ipv4/af_inet.c:427 inet6_release+0x50/0x70 net/ipv6/af_inet6.c:460 sock_release+0x96/0x1b0 net/socket.c:594 sock_close+0x16/0x20 net/socket.c:1149 __fput+0x34d/0x890 fs/file_table.c:209 ____fput+0x15/0x20 fs/file_table.c:243 task_work_run+0x1e4/0x290 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x1aee/0x2730 kernel/exit.c:865 do_group_exit+0x16f/0x430 kernel/exit.c:968 get_signal+0x886/0x1960 kernel/signal.c:2469 do_signal+0x98/0x2040 arch/x86/kernel/signal.c:810 exit_to_usermode_loop+0x28a/0x310 arch/x86/entry/common.c:162 prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline] syscall_return_slowpath arch/x86/entry/common.c:265 [inline] do_syscall_64+0x6ac/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8801ae40a800 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 88 bytes inside of 256-byte region [ffff8801ae40a800, ffff8801ae40a900) The buggy address belongs to the page: page:ffffea0006b90280 count:1 mapcount:0 mapping:ffff8801ae40a080 index:0x0 flags: 0x2fffc0000000100(slab) raw: 02fffc0000000100 ffff8801ae40a080 0000000000000000 000000010000000c raw: ffffea0006bea9e0 ffffea0006bc94a0 ffff8801da8007c0 0000000000000000 page dumped because: kasan: bad access detected Fixes: dd0bed1 ("tls: support for Inline tls record") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Atul Gupta <atul.gupta@chelsio.com> Cc: Steve Wise <swise@opengridcomputing.com> Cc: Ilya Lesokhin <ilyal@mellanox.com> Cc: Aviad Yehezkel <aviadye@mellanox.com> Cc: Dave Watson <davejwatson@fb.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
0lvin
pushed a commit
to free-z4u/roc-rk3328-cc-official
that referenced
this issue
Sep 28, 2019
Do not perform the rfkill cleanup routine when (asus->driver->wlan_ctrl_by_user && ashs_present()) is true, since nothing is registered with the rfkill subsystem in that case. Doing so leads to the following kernel NULL pointer dereference: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 PGD 1a3aa8067 PUD 1a3b3d067 PMD 0 Oops: 0002 [FireflyTeam#1] PREEMPT SMP Modules linked in: bnep ccm binfmt_misc uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core hid_a4tech videodev x86_pkg_temp_thermal intel_powerclamp coretemp ath3k btusb btrtl btintel bluetooth kvm_intel snd_hda_codec_hdmi kvm snd_hda_codec_realtek snd_hda_codec_generic irqbypass crc32c_intel arc4 i915 snd_hda_intel snd_hda_codec ath9k ath9k_common ath9k_hw ath i2c_algo_bit snd_hwdep mac80211 ghash_clmulni_intel snd_hda_core snd_pcm snd_timer cfg80211 ehci_pci xhci_pci drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm xhci_hcd ehci_hcd asus_nb_wmi(-) asus_wmi sparse_keymap r8169 rfkill mxm_wmi serio_raw snd mii mei_me lpc_ich i2c_i801 video soundcore mei i2c_smbus wmi i2c_core mfd_core CPU: 3 PID: 3275 Comm: modprobe Not tainted 4.9.34-gentoo rockchip-linux#34 Hardware name: ASUSTeK COMPUTER INC. K56CM/K56CM, BIOS K56CM.206 08/21/2012 task: ffff8801a639ba00 task.stack: ffffc900014cc000 RIP: 0010:[<ffffffff816c7348>] [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 RSP: 0018:ffffc900014cfce0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8801a54315b0 RCX: 00000000c0000100 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8801a54315b4 RBP: ffffc900014cfd30 R08: 0000000000000000 R09: 0000000000000002 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801a54315b4 R13: ffff8801a639ba00 R14: 00000000ffffffff R15: ffff8801a54315b8 FS: 00007faa254fb700(0000) GS:ffff8801aef80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001a3b1b000 CR4: 00000000001406e0 Stack: ffff8801a54315b8 0000000000000000 ffffffff814733ae ffffc900014cfd28 ffffffff8146a28c ffff8801a54315b0 0000000000000000 ffff8801a54315b0 ffff8801a66f3820 0000000000000000 ffffc900014cfd48 ffffffff816c73e7 Call Trace: [<ffffffff814733ae>] ? acpi_ut_release_mutex+0x5d/0x61 [<ffffffff8146a28c>] ? acpi_ns_get_node+0x49/0x52 [<ffffffff816c73e7>] mutex_lock+0x17/0x30 [<ffffffffa00a3bb4>] asus_rfkill_hotplug+0x24/0x1a0 [asus_wmi] [<ffffffffa00a4421>] asus_wmi_rfkill_exit+0x61/0x150 [asus_wmi] [<ffffffffa00a49f1>] asus_wmi_remove+0x61/0xb0 [asus_wmi] [<ffffffff814a5128>] platform_drv_remove+0x28/0x40 [<ffffffff814a2901>] __device_release_driver+0xa1/0x160 [<ffffffff814a29e3>] device_release_driver+0x23/0x30 [<ffffffff814a1ffd>] bus_remove_device+0xfd/0x170 [<ffffffff8149e5a9>] device_del+0x139/0x270 [<ffffffff814a5028>] platform_device_del+0x28/0x90 [<ffffffff814a50a2>] platform_device_unregister+0x12/0x30 [<ffffffffa00a4209>] asus_wmi_unregister_driver+0x19/0x30 [asus_wmi] [<ffffffffa00da0ea>] asus_nb_wmi_exit+0x10/0xf26 [asus_nb_wmi] [<ffffffff8110c692>] SyS_delete_module+0x192/0x270 [<ffffffff810022b2>] ? exit_to_usermode_loop+0x92/0xa0 [<ffffffff816ca560>] entry_SYSCALL_64_fastpath+0x13/0x94 Code: e8 5e 30 00 00 8b 03 83 f8 01 0f 84 93 00 00 00 48 8b 43 10 4c 8d 7b 08 48 89 63 10 41 be ff ff ff ff 4c 89 3c 24 48 89 44 24 08 <48> 89 20 4c 89 6c 24 10 eb 1d 4c 89 e7 49 c7 45 08 02 00 00 00 RIP [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 RSP <ffffc900014cfce0> CR2: 0000000000000000 ---[ end trace 8d484233fa7cb512 ]--- note: modprobe[3275] exited with preempt_count 2 https://bugzilla.kernel.org/show_bug.cgi?id=196467 Reported-by: red.f0xyz@gmail.com Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
0lvin
pushed a commit
to free-z4u/roc-rk3328-cc-official
that referenced
this issue
Oct 12, 2019
gpiochip_set_cascaded_irqchip() is passed 'parent_irq' as an argument and then the address of that argument is assigned to the gpio chips gpio_irq_chip 'parents' pointer shortly thereafter. This can't ever work, because we've just assigned some stack address to a pointer that we plan to dereference later in gpiochip_irq_map(). I ran into this issue with the KASAN report below when gpiochip_irq_map() tried to setup the parent irq with a total junk pointer for the 'parents' array. BUG: KASAN: stack-out-of-bounds in gpiochip_irq_map+0x228/0x248 Read of size 4 at addr ffffffc0dde472e0 by task swapper/0/1 CPU: 7 PID: 1 Comm: swapper/0 Not tainted 4.14.72 rockchip-linux#34 Call trace: [<ffffff9008093638>] dump_backtrace+0x0/0x718 [<ffffff9008093da4>] show_stack+0x20/0x2c [<ffffff90096b9224>] __dump_stack+0x20/0x28 [<ffffff90096b91c8>] dump_stack+0x80/0xbc [<ffffff900845a350>] print_address_description+0x70/0x238 [<ffffff900845a8e4>] kasan_report+0x1cc/0x260 [<ffffff900845aa14>] __asan_report_load4_noabort+0x2c/0x38 [<ffffff900897e098>] gpiochip_irq_map+0x228/0x248 [<ffffff900820cc08>] irq_domain_associate+0x114/0x2ec [<ffffff900820d13c>] irq_create_mapping+0x120/0x234 [<ffffff900820da78>] irq_create_fwspec_mapping+0x4c8/0x88c [<ffffff900820e2d8>] irq_create_of_mapping+0x180/0x210 [<ffffff900917114c>] of_irq_get+0x138/0x198 [<ffffff9008dc70ac>] spi_drv_probe+0x94/0x178 [<ffffff9008ca5168>] driver_probe_device+0x51c/0x824 [<ffffff9008ca6538>] __device_attach_driver+0x148/0x20c [<ffffff9008ca14cc>] bus_for_each_drv+0x120/0x188 [<ffffff9008ca570c>] __device_attach+0x19c/0x2dc [<ffffff9008ca586c>] device_initial_probe+0x20/0x2c [<ffffff9008ca18bc>] bus_probe_device+0x80/0x154 [<ffffff9008c9b9b4>] device_add+0x9b8/0xbdc [<ffffff9008dc7640>] spi_add_device+0x1b8/0x380 [<ffffff9008dcbaf0>] spi_register_controller+0x111c/0x1378 [<ffffff9008dd6b10>] spi_geni_probe+0x4dc/0x6f8 [<ffffff9008cab058>] platform_drv_probe+0xdc/0x130 [<ffffff9008ca5168>] driver_probe_device+0x51c/0x824 [<ffffff9008ca59cc>] __driver_attach+0x100/0x194 [<ffffff9008ca0ea8>] bus_for_each_dev+0x104/0x16c [<ffffff9008ca58c0>] driver_attach+0x48/0x54 [<ffffff9008ca1edc>] bus_add_driver+0x274/0x498 [<ffffff9008ca8448>] driver_register+0x1ac/0x230 [<ffffff9008caaf6c>] __platform_driver_register+0xcc/0xdc [<ffffff9009c4b33c>] spi_geni_driver_init+0x1c/0x24 [<ffffff9008084cb8>] do_one_initcall+0x240/0x3dc [<ffffff9009c017d0>] kernel_init_freeable+0x378/0x468 [<ffffff90096e8240>] kernel_init+0x14/0x110 [<ffffff9008086fcc>] ret_from_fork+0x10/0x18 The buggy address belongs to the page: page:ffffffbf037791c0 count:0 mapcount:0 mapping: (null) index:0x0 flags: 0x4000000000000000() raw: 4000000000000000 0000000000000000 0000000000000000 00000000ffffffff raw: ffffffbf037791e0 ffffffbf037791e0 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffffc0dde47180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffffc0dde47200: f1 f1 f1 f1 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f2 f2 >ffffffc0dde47280: f2 f2 00 00 00 00 00 00 00 00 00 00 f3 f3 f3 f3 ^ ffffffc0dde47300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffffc0dde47380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Let's leave around one unsigned int in the gpio_irq_chip struct for the single parent irq case and repoint the 'parents' array at it. This way code is left mostly intact to setup parents and we waste an extra few bytes per structure of which there should be only a handful in a system. Cc: Evan Green <evgreen@chromium.org> Cc: Thierry Reding <treding@nvidia.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Fixes: e0d8972 ("gpio: Implement tighter IRQ chip integration") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
rkchrome
pushed a commit
that referenced
this issue
Oct 10, 2020
[ Upstream commit 96298f6 ] According to Core Spec Version 5.2 | Vol 3, Part A 6.1.5, the incoming L2CAP_ConfigReq should be handled during OPEN state. The section below shows the btmon trace when running L2CAP/COS/CFD/BV-12-C before and after this change. === Before === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 #22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 #23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 #24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 #25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 #26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 #27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 #28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 #29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 #30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 #31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ...... < ACL Data TX: Handle 256 flags 0x00 dlen 14 #32 L2CAP: Command Reject (0x01) ident 3 len 6 Reason: Invalid CID in request (0x0002) Destination CID: 64 Source CID: 65 > HCI Event: Number of Completed Packets (0x13) plen 5 #33 Num handles: 1 Handle: 256 Count: 1 ... === After === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 #22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 #23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 #24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 #25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 #26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 #27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 #28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 #29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 #30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 #31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ..... < ACL Data TX: Handle 256 flags 0x00 dlen 18 #32 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 < ACL Data TX: Handle 256 flags 0x00 dlen 12 #33 L2CAP: Configure Request (0x04) ident 3 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 #34 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 #35 Num handles: 1 Handle: 256 Count: 1 ... Signed-off-by: Howard Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
First saw this with xenial-minimal-rock64-0.4.17-85-arm64.img. Next tried jessie-minimal-rock64-0.5.7-101-arm64.img, and seeing same basic issue. After disconnecting USB 3.0 HD from USB 3.0 port, any attempt to interface with USB causes timeout and kernel panic.
Using rock64 4GB, booting from 4GB SD Card. Connected a USB 3.0 external disk drive (already formatted w/ 2 linux partitions). Drive is a Seagate 2TB 2.5" Hybrid drive, in a bus powered JMicron based external housing.
Mounted both partitions under /media/sda1 & /media/sda3. Did 'ls -ahl' on both mounts. Then unmounted both partitions, and verified with "mount". Next unplugged USB drive.
The jessie image console output at disconnect was :
[ 873.393783] usb usb5-port1: Cannot enable. Maybe the USB cable is bad?
[ 873.394805] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[ 873.395754] usb usb5-port1: cannot disable (err = -32)
[ 875.910788] usb usb5-port1: Cannot enable. Maybe the USB cable is bad?
[ 875.911801] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[ 875.912735] usb usb5-port1: cannot disable (err = -32)
[ 878.426774] usb usb5-port1: Cannot enable. Maybe the USB cable is bad?
[ 878.427787] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[ 878.428729] usb usb5-port1: cannot disable (err = -32)
[ 880.943791] usb usb5-port1: Cannot enable. Maybe the USB cable is bad?
[ 880.944809] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[ 880.945741] usb usb5-port1: cannot disable (err = -32)
[ 880.946543] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[ 880.947492] usb usb5-port1: cannot disable (err = -32)
[ 880.948328] scsi host0: uas_post_reset: alloc streams error -19 after reset
[ 880.952607] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Awhile later, tried to do a lsusb, and it hung. Then kernel panic was next :
(attached as text file, since form is messing with content)
kernelpanic.txt
The text was updated successfully, but these errors were encountered: