Skip to content

Commit

Permalink
greyed out pin is still used #4086
Browse files Browse the repository at this point in the history 
at least some progress
  • Loading branch information
rusefillc committed May 26, 2022
1 parent 07c50cf commit 3cf3618
Showing 1 changed file with 10 additions and 10 deletions.
20 changes: 10 additions & 10 deletions firmware/tunerstudio/rusefi.input
View file
Expand Up @@ -2015,10 +2015,10 @@ cmd_set_engine_type_default = "@@TS_IO_TEST_COMMAND_char@@\x00\x31\x00\x00"
field = "Invert Secondary", invertSecondaryTriggerSignal, { triggerInputPins2 != 0 && (@@TRIGGER_TYPE_WITH_SECOND_WHEEL@@) }
field = "#VVT or Cam for 60/2 goes below"
field = "#If your engine has no exhaust cam sensor, use intake cam inputs"
field = "Cam sensor bank 1 intake", camInputs1, { vvtMode1 != @@vvt_mode_e_VVT_INACTIVE@@ }
field = "Cam sensor bank 1 exhaust", camInputs2, { vvtMode2 != @@vvt_mode_e_VVT_INACTIVE@@ && camInputs1 != 0 }
field = "Cam sensor bank 2 intake", camInputs3, { vvtMode1 != @@vvt_mode_e_VVT_INACTIVE@@ && camInputs1 != 0 }
field = "Cam sensor bank 2 exhaust", camInputs4, { vvtMode2 != @@vvt_mode_e_VVT_INACTIVE@@ && camInputs2 != 0 }
field = "Cam sensor bank 1 intake", camInputs1, { camInputs1 != 0 || (vvtMode1 != @@vvt_mode_e_VVT_INACTIVE@@ ) }
field = "Cam sensor bank 1 exhaust", camInputs2, { camInputs2 != 0 || (vvtMode2 != @@vvt_mode_e_VVT_INACTIVE@@ && camInputs1 != 0 ) }
field = "Cam sensor bank 2 intake", camInputs3, { camInputs3 != 0 || (vvtMode1 != @@vvt_mode_e_VVT_INACTIVE@@ && camInputs1 != 0 ) }
field = "Cam sensor bank 2 exhaust", camInputs4, { camInputs4 != 0 || (vvtMode2 != @@vvt_mode_e_VVT_INACTIVE@@ && camInputs2 != 0 ) }
field = "Invert cam inputs", invertCamVVTSignal, { camInputs1 != 0 }
panel = triggerInputComparator @@if_ts_show_trigger_comparator

Expand Down Expand Up @@ -2481,8 +2481,8 @@ cmd_set_engine_type_default = "@@TS_IO_TEST_COMMAND_char@@\x00\x31\x00\x00"
field = "GPS TX", gps_tx_pin @@if_ts_show_gps
field = "CAN RX pin", canRxPin @@if_ts_show_can_pins
field = "CAN TX pin", canTxPin @@if_ts_show_can_pins
field = "SPI1 MOSI", spi1mosiPin, {is_enabled_spi_1 == 1} @@if_ts_show_spi
field = "SPI1 MISO", spi1misoPin, {is_enabled_spi_1 == 1} @@if_ts_show_spi
field = "SPI1 MOSI", spi1mosiPin, { spi1mosiPin != 0 || is_enabled_spi_1 == 1} @@if_ts_show_spi
field = "SPI1 MISO", spi1misoPin, { spi1misoPin != 0 || is_enabled_spi_1 == 1} @@if_ts_show_spi
field = "SPI1 SCK", spi1sckPin, {is_enabled_spi_1 == 1} @@if_ts_show_spi
field = "SPI2 MOSI", spi2mosiPin, {is_enabled_spi_2 == 1} @@if_ts_show_spi
field = "SPI2 MISO", spi2misoPin, {is_enabled_spi_2 == 1} @@if_ts_show_spi
Expand Down Expand Up @@ -3138,7 +3138,7 @@ cmd_set_engine_type_default = "@@TS_IO_TEST_COMMAND_char@@\x00\x31\x00\x00"
dialog = startStopDialog, "Start/Stop Button"
field = "Start/Stop Button Pin", startStopButtonPin
field = "Start/Stop Button Mode", startStopButtonMode
field = "Starter Control", starterControlPin, {startStopButtonPin != 0}
field = "Starter Control", starterControlPin, { starterControlPin != 0 || startStopButtonPin != 0}
field = "Start cranking maximum time", startCrankingDuration, {startStopButtonPin != 0}

dialog = energySystems, "Battery and Alternator Settings", yAxis
Expand Down Expand Up @@ -3515,7 +3515,7 @@ dialog = tcuControls, "Transmission Settings"
dialog = boostDialog, ""
field = "Enable", isBoostControlEnabled
field = "Control Mode", boostType, { isBoostControlEnabled }
field = "Output", boostControlPin, { isBoostControlEnabled }
field = "Output", boostControlPin, { boostControlPin != 0 || isBoostControlEnabled }
field = "Output Mode", boostControlPinMode, { isBoostControlEnabled }
field = "Frequency", boostPwmFrequency, { isBoostControlEnabled }
field = "Safe duty cycle", boostControlSafeDutyCycle, { isBoostControlEnabled }
Expand Down Expand Up @@ -3798,7 +3798,7 @@ dialog = tcuControls, "Transmission Settings"
field = "Enable Launch Control", launchControlEnabled
field = "Activation Mode", launchActivationMode

field = "Launch Button", launchActivatePin, {launchActivationMode == @@launchActivationMode_e_SWITCH_INPUT_LAUNCH@@ && launchControlEnabled == 1}
field = "Launch Button", launchActivatePin, { launchActivatePin != 0 || (launchActivationMode == @@launchActivationMode_e_SWITCH_INPUT_LAUNCH@@ && launchControlEnabled == 1)}
field = "Launch Button inverted", launchActivateInverted
field = "Launch Button mode", launchActivatePinMode, {launchActivationMode == @@launchActivationMode_e_SWITCH_INPUT_LAUNCH@@ && launchControlEnabled == 1}

Expand Down Expand Up @@ -3836,7 +3836,7 @@ dialog = tcuControls, "Transmission Settings"
dialog = antiLag, "AntiLag Settings NOT WORKING"
field = "Enable AntiLag", antiLagEnabled
field = "Activation Mode", antiLagActivationMode, {antiLagEnabled == 1}
field = "Switch Input", antiLagActivatePin, {antiLagActivationMode == 1 && antiLagEnabled == 1}
field = "Switch Input", antiLagActivatePin, {antiLagActivatePin != 0 || ( antiLagActivationMode == 1 && antiLagEnabled == 1 ) }


dialog = coastingFuelCutControl, "Coasting Fuel Cutoff Settings"
Expand Down

0 comments on commit 3cf3618

Please sign in to comment.