test failed, to rerun pass `--lib`

The process 'cross' failed with exit code 101

The operation was canceled.

The operation was canceled.

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1.0.6. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1.0.6, Swatinem/rust-cache@v1.3.0, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

field `buffer` is never read

field `hts_format` is never read

the type `hts_sys::bam1_t` does not permit being left uninitialized

`rust-htslib` (lib) generated 3 warnings

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

warning: the type `hts_sys::bam1_t` does not permit being left uninitialized --> src/bam/record.rs:128:42 | 128 | let mut inner = unsafe { MaybeUninit::uninit().assume_init() }; | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | | | this code causes undefined behavior when executed | help: use `MaybeUninit<T>` instead, and only call `assume_init` after initialization is done | = note: integers must be initialized = note: `#[warn(invalid_value)]` on by default

warning: usage of an `Arc` that is not `Send` or `Sync` --> src/tpool.rs:33:26 | 33 | let handle = Arc::new(RefCell::new(inner)); | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | = note: the trait `Send` is not implemented for `RefCell<InnerThreadPool>` = note: the trait `Sync` is not implemented for `RefCell<InnerThreadPool>` = note: required for `Arc<RefCell<InnerThreadPool>>` to implement `Send` and `Sync` = help: consider using an `Rc` instead or wrapping the inner type with a `Mutex` = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#arc_with_non_send_sync = note: `#[warn(clippy::arc_with_non_send_sync)]` on by default

warning: unneeded `return` statement --> src/bgzf/mod.rs:235:9 | 235 | return Ok(ffi::CString::new(write_string).unwrap()); | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return help: remove `return` | 235 - return Ok(ffi::CString::new(write_string).unwrap()); 235 + Ok(ffi::CString::new(write_string).unwrap()) |

warning: redundant closure --> src/bcf/record.rs:1471:22 | 1471 | .map(|s| trim_slice(s)) | ^^^^^^^^^^^^^^^^^ help: replace the closure with the function itself: `trim_slice` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_closure

warning: redundant closure --> src/bcf/record.rs:1448:22 | 1448 | .map(|s| trim_slice(s)) | ^^^^^^^^^^^^^^^^^ help: replace the closure with the function itself: `trim_slice` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_closure = note: `#[warn(clippy::redundant_closure)]` on by default

warning: very complex type used. Consider factoring parts into `type` definitions --> src/bcf/record.rs:1329:32 | 1329 | pub fn string(mut self) -> Result<Option<BufferBacked<'b, Vec<&'b [u8]>, B>>> { | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#type_complexity = note: `#[warn(clippy::type_complexity)]` on by default

warning: dereferencing a tuple pattern where every element takes a reference --> src/bcf/record.rs:1196:13 | 1196 | let &Genotype(ref alleles) = self; | ^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrowed_reference = note: `#[warn(clippy::needless_borrowed_reference)]` on by default help: try removing the `&` and `ref` parts | 1196 - let &Genotype(ref alleles) = self; 1196 + let Genotype(alleles) = self; |

warning: returning the result of a `let` binding from a block --> src/bcf/record.rs:1097:13 | 1096 | let inner = htslib::bcf_dup(self.inner); | ---------------------------------------- unnecessary `let` binding 1097 | inner | ^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#let_and_return = note: `#[warn(clippy::let_and_return)]` on by default help: return the expression directly | 1096 ~ 1097 ~ htslib::bcf_dup(self.inner) |

warning: casting raw pointers to the same type and constness is unnecessary (`*mut libc::c_void` -> `*mut libc::c_void`) --> src/bcf/record.rs:126:26 | 126 | ::libc::free(self.inner as *mut ::libc::c_void); | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `self.inner` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast

warning: you should consider adding a `Default` implementation for `Buffer` --> src/bcf/record.rs:115:5 | 115 | / pub fn new() -> Self { 116 | | Buffer { 117 | | inner: ptr::null_mut(), 118 | | len: 0, 119 | | } 120 | | } | |_____^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#new_without_default = note: `#[warn(clippy::new_without_default)]` on by default help: try adding this | 114 + impl Default for Buffer { 115 + fn default() -> Self { 116 + Self::new() 117 + } 118 + } |

warning: casting raw pointers to the same type and constness is unnecessary (`*mut i32` -> `*mut i32`) --> src/bcf/header.rs:120:17 | 120 | imap.as_mut_ptr() as *mut i32, | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `imap.as_mut_ptr()` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast

warning: casting raw pointers to the same type and constness is unnecessary (`*const *mut i8` -> `*const *mut i8`) --> src/bcf/header.rs:119:17 | 119 | name_pointers.as_ptr() as *const *mut c_char, | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `name_pointers.as_ptr()` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast

warning: this expression creates a reference which is immediately dereferenced by the compiler --> src/bam/mod.rs:1289:32 | 1289 | match self.reader.read(&mut record) { | ^^^^^^^^^^^ help: change this to: `record` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrow = note: `#[warn(clippy::needless_borrow)]` on by default

warning: casting to the same type is unnecessary (`usize` -> `usize`) --> src/bam/mod.rs:1123:17 | 1123 | ((l_text + 1) as usize).try_into().unwrap(), | ^^^^^^^^^^^^^^^^^^^^^^^ help: try: `(l_text + 1)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast

warning: unneeded `return` statement --> src/bam/record.rs:2447:9 | 2447 | return Some(Ok(data)); | ^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return help: remove `return` | 2447 - return Some(Ok(data)); 2447 + Some(Ok(data)) |

warning: unneeded `return` statement --> src/bam/record.rs:2413:9 | 2413 | return self.mod_state.query_type(code); | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return help: remove `return` | 2413 - return self.mod_state.query_type(code); 2413 + self.mod_state.query_type(code) |

warning: this lifetime isn't used in the function definition --> src/bam/record.rs:2412:23 | 2412 | pub fn query_type<'a>(&self, code: i32) -> Result<BaseModificationMetadata> { | ^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#extra_unused_lifetimes

warning: the following explicit lifetimes could be elided: 'a --> src/bam/record.rs:2400:12 | 2400 | fn new<'a>(r: &'a Record) -> Result<BaseModificationsIter<'a>> { | ^^ ^^ ^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_lifetimes help: elide the lifetimes | 2400 - fn new<'a>(r: &'a Record) -> Result<BaseModificationsIter<'a>> { 2400 + fn new(r: &Record) -> Result<BaseModificationsIter<'_>> { |

warning: unneeded `return` statement --> src/bam/record.rs:2387:23 | 2387 | Err(e) => return Some(Err(e)), | ^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return help: remove `return` | 2387 | Err(e) => Some(Err(e)), | ~~~~~~~~~~~~

warning: unneeded `return` statement --> src/bam/record.rs:2384:21 | 2384 | return Some(Ok(data)); | ^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return help: remove `return` | 2384 - return Some(Ok(data)); 2384 + Some(Ok(data)) |

warning: unneeded `return` statement --> src/bam/record.rs:2381:21 | 2381 | return None; | ^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return help: remove `return` | 2381 - return None; 2381 + None |

warning: unneeded `return` statement --> src/bam/record.rs:2364:9 | 2364 | return self.mod_state.query_type(code); | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return help: remove `return` | 2364 - return self.mod_state.query_type(code); 2364 + self.mod_state.query_type(code) |

warning: this lifetime isn't used in the function definition --> src/bam/record.rs:2363:23 | 2363 | pub fn query_type<'a>(&self, code: i32) -> Result<BaseModificationMetadata> { | ^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#extra_unused_lifetimes

warning: the following explicit lifetimes could be elided: 'a --> src/bam/record.rs:2354:12 | 2354 | fn new<'a>(r: &'a Record) -> Result<BaseModificationsPositionIter<'a>> { | ^^ ^^ ^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_lifetimes help: elide the lifetimes | 2354 - fn new<'a>(r: &'a Record) -> Result<BaseModificationsPositionIter<'a>> { 2354 + fn new(r: &Record) -> Result<BaseModificationsPositionIter<'_>> { |

warning: unneeded `return` statement --> src/bam/record.rs:2329:17 | 2329 | / return Ok(BaseModificationMetadata { 2330 | | strand, 2331 | | implicit, 2332 | | canonical, 2333 | | }); | |__________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return help: remove `return` | 2329 ~ Ok(BaseModificationMetadata { 2330 + strand, 2331 + implicit, 2332 + canonical, 2333 ~ }) |

warning: unneeded `return` statement --> src/bam/record.rs:2327:17 | 2327 | return Err(Error::BamBaseModificationTypeNotFound); | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return help: remove `return` | 2327 - return Err(Error::BamBaseModificationTypeNotFound); 2327 + Err(Error::BamBaseModificationTypeNotFound) |

warning: this lifetime isn't used in the function definition --> src/bam/record.rs:2313:23 | 2313 | pub fn query_type<'a>(&self, code: i32) -> Result<BaseModificationMetadata> { | ^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#extra_unused_lifetimes = note: `#[warn(clippy::extra_unused_lifetimes)]` on by default

warning: unneeded `return` statement --> src/bam/record.rs:2288:13 | 2288 | return Ok(ret as usize); | ^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return help: remove `return` | 2288 - return Ok(ret as usize); 2288 + Ok(ret as usize) |

warning: unneeded `return` statement --> src/bam/record.rs:2260:9 | 2260 | return Ok(bm); | ^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return = note: `#[warn(clippy::needless_return)]` on by default help: remove `return` | 2260 - return Ok(bm); 2260 + Ok(bm) |

warning: the following explicit lifetimes could be elided: 'a --> src/bam/record.rs:2236:12 | 2236 | fn new<'a>(r: &'a Record) -> Result<BaseModificationState<'a>> { | ^^ ^^ ^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_lifetimes = note: `#[warn(clippy::needless_lifetimes)]` on by default help: elide the lifetimes | 2236 - fn new<'a>(r: &'a Record) -> Result<BaseModificationState<'a>> { 2236 + fn new(r: &Record) -> Result<BaseModificationState<'_>> { |

warning: unsafe function's docs miss `# Safety` section --> src/bam/record.rs:1619:5 | 1619 | pub unsafe fn decoded_base_unchecked(&self, i: usize) -> u8 { | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#missing_safety_doc

warning: unsafe function's docs miss `# Safety` section --> src/bam/record.rs:1611:5 | 1611 | pub unsafe fn encoded_base_unchecked(&self, i: usize) -> u8 { | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#missing_safety_doc = note: `#[warn(clippy::missing_safety_doc)]` on by default

warning: casting raw pointers to the same type and constness is unnecessary (`*mut u8` -> `*mut u8`) --> src/bam/record.rs:816:21 | 816 | [v].as_mut_ptr() as *mut u8, | ^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `[v].as_mut_ptr()` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast

warning: casting raw pointers to the same type and constness is unnecessary (`*mut u8` -> `*mut u8`) --> src/bam/record.rs:802:21 | 802 | [v].as_mut_ptr() as *mut u8, | ^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `[v].as_mut_ptr()` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast = note: `#[warn(clippy::unnecessary_cast)]` on by default

warning: this item has comments with 4 forward slashes (`////`). These look like doc comments, but they aren't --> src/bam/ext.rs:1:1 | 1 | / //// Copyright 2019 Johannes Köster and Florian Finkernagel. 2 | | // Licensed under the MIT license (http://opensource.org/licenses/MIT) 3 | | // This file may not be copied, modified, or distributed 4 | | // except according to those terms. ... | 7 | | 8 | | use crate::bam; | |_ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#four_forward_slashes = note: `#[warn(clippy::four_forward_slashes)]` on by default help: make this a doc comment by removing one `/` | 1 + /// Copyright 2019 Johannes Köster and Florian Finkernagel. |

warning: field `hts_format` is never read --> src/tbx/mod.rs:94:5 | 87 | pub struct Reader { | ------ field in this struct ... 94 | hts_format: htslib::htsExactFormat, | ^^^^^^^^^^ | = note: `Reader` has a derived impl for the trait `Debug`, but this is intentionally ignored during dead code analysis

warning: field `buffer` is never read --> src/bcf/record.rs:134:5 | 132 | pub struct BufferBacked<'a, T: 'a + fmt::Debug, B: Borrow<Buffer> + 'a> { | ------------ field in this struct 133 | value: T, 134 | buffer: B, | ^^^^^^ | = note: `BufferBacked` has a derived impl for the trait `Debug`, but this is intentionally ignored during dead code analysis = note: `#[warn(dead_code)]` on by default

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1.0.6, actions-rs/clippy-check@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1.0.6, Swatinem/rust-cache@v1.3.0, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

field `buffer` is never read

field `hts_format` is never read

the type `hts_sys::bam1_t` does not permit being left uninitialized

`rust-htslib` (lib) generated 3 warnings

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1.0.6, Swatinem/rust-cache@v1.3.0, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

field `buffer` is never read

field `hts_format` is never read

the type `hts_sys::bam1_t` does not permit being left uninitialized

`rust-htslib` (lib) generated 3 warnings

the following packages contain code that will be rejected by a future version of Rust: bindgen v0.53.3

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1.0.6, Swatinem/rust-cache@v1.3.0, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1.0.6, Swatinem/rust-cache@v1.3.0, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1.0.6, actions-rs/cargo@v1.0.1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1.0.6, actions-rs/cargo@v1.0.1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1.0.6, actions-rs/cargo@v1.0.1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1.0.6, Swatinem/rust-cache@v1.3.0, actions-rs/tarpaulin@v0.1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/