chore(deps): update dependency eslint to v9

[renovate]

This PR contains the following updates:

Package	Change	Age	Adoption	Passing	Confidence
eslint (source)	^8.57.0 -> ^9.1.1
eslint (source)	^8.0.0 -> ^8.0.0 || ^9.0.0

---

Release Notes

eslint/eslint (eslint)

v9.1.1

Compare Source

v9.1.0

Compare Source

v9.0.0

Compare Source

---

Configuration

📅 Schedule: Branch creation - "every weekend" in timezone Asia/Shanghai, Automerge - At any time (no schedule defined).

🚦 Automerge: Enabled.

♻ Rebasing: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox.

🔕 Ignore: Close this PR and you won't be reminded about these updates again.

---

• If you want to rebase/retry this PR, check this box

---

This PR has been generated by Mend Renovate. View repository job log here.

[codecov]

Codecov Report

All modified and coverable lines are covered by tests ✅

Project coverage is 96.29%. Comparing base (47b7cd6) to head (e2de169).

Additional details and impacted files

@@           Coverage Diff           @@
##             main    #1168   +/-   ##
=======================================
  Coverage   96.29%   96.29%           
=======================================
  Files          21       21           
  Lines         189      189           
  Branches       17       17           
=======================================
  Hits          182      182           
+ Misses          7        5    -2     
- Partials        0        2    +2     

☔ View full report in Codecov by Sentry.
📢 Have feedback on the report? Share it here.

[pull-request-quantifier-deprecated]

This PR has 632 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

---

Quantification details

Label      : Extra Large
Size       : +314 -318
Percentile : 87.73%

Total files changed: 6

Change summary by file extension:
.json : +5 -5
.yaml : +309 -313

Change counts above are quantified counts, based on the PullRequestQuantifier customizations.

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a
balance between between PR complexity and PR review overhead. PRs within the
optimal size (typical small, or medium sized PRs) mean:

• Fast and predictable releases to production:
  • Optimal size changes are more likely to be reviewed faster with fewer
    iterations.
  • Similarity in low PR complexity drives similar review times.
• Review quality is likely higher as complexity is lower:
  • Bugs are more likely to be detected.
  • Code inconsistencies are more likely to be detected.
• Knowledge sharing is improved within the participants:
  • Small portions can be assimilated better.
• Better engineering practices are exercised:
  • Solving big problems by dividing them in well contained, smaller problems.
  • Exercising separation of concerns within the code changes.

What can I do to optimize my changes

• Use the PullRequestQuantifier to quantify your PR accurately
  • Create a context profile for your repo using the context generator
  • Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
  • Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
  • Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
• Change your engineering behaviors
  • For PRs that fall outside of the desired spectrum, review the details and check if:
    • Your PR could be split in smaller, self-contained PRs instead
    • Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

• One line was added: +1 -0
• One line was deleted: +0 -1
• One line was modified: +1 -1 (git diff doesn't know about modified, it will
  interpret that line like one addition plus one deletion)
• Change percentiles: Change characteristics (addition, deletion, modification)
  of this PR in relation to all other PRs within the repository.

---

Was this comment helpful? 👍  :ok_hand:  :thumbsdown: (Email)
Customize PullRequestQuantifier for this repository.

[pull-request-quantifier-deprecated]

This PR has 632 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

---

Quantification details

Label      : Extra Large
Size       : +314 -318
Percentile : 87.73%

Total files changed: 6

Change summary by file extension:
.json : +5 -5
.yaml : +309 -313

Change counts above are quantified counts, based on the PullRequestQuantifier customizations.

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a
balance between between PR complexity and PR review overhead. PRs within the
optimal size (typical small, or medium sized PRs) mean:

• Fast and predictable releases to production:
  • Optimal size changes are more likely to be reviewed faster with fewer
    iterations.
  • Similarity in low PR complexity drives similar review times.
• Review quality is likely higher as complexity is lower:
  • Bugs are more likely to be detected.
  • Code inconsistencies are more likely to be detected.
• Knowledge sharing is improved within the participants:
  • Small portions can be assimilated better.
• Better engineering practices are exercised:
  • Solving big problems by dividing them in well contained, smaller problems.
  • Exercising separation of concerns within the code changes.

What can I do to optimize my changes

• Use the PullRequestQuantifier to quantify your PR accurately
  • Create a context profile for your repo using the context generator
  • Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
  • Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
  • Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
• Change your engineering behaviors
  • For PRs that fall outside of the desired spectrum, review the details and check if:
    • Your PR could be split in smaller, self-contained PRs instead
    • Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

• One line was added: +1 -0
• One line was deleted: +0 -1
• One line was modified: +1 -1 (git diff doesn't know about modified, it will
  interpret that line like one addition plus one deletion)
• Change percentiles: Change characteristics (addition, deletion, modification)
  of this PR in relation to all other PRs within the repository.

---

Was this comment helpful? 👍  :ok_hand:  :thumbsdown: (Email)
Customize PullRequestQuantifier for this repository.

[pull-request-quantifier-deprecated]

This PR has 632 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

---

Quantification details

Label      : Extra Large
Size       : +314 -318
Percentile : 87.73%

Total files changed: 6

Change summary by file extension:
.json : +5 -5
.yaml : +309 -313

Change counts above are quantified counts, based on the PullRequestQuantifier customizations.

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a
balance between between PR complexity and PR review overhead. PRs within the
optimal size (typical small, or medium sized PRs) mean:

• Fast and predictable releases to production:
  • Optimal size changes are more likely to be reviewed faster with fewer
    iterations.
  • Similarity in low PR complexity drives similar review times.
• Review quality is likely higher as complexity is lower:
  • Bugs are more likely to be detected.
  • Code inconsistencies are more likely to be detected.
• Knowledge sharing is improved within the participants:
  • Small portions can be assimilated better.
• Better engineering practices are exercised:
  • Solving big problems by dividing them in well contained, smaller problems.
  • Exercising separation of concerns within the code changes.

What can I do to optimize my changes

• Use the PullRequestQuantifier to quantify your PR accurately
  • Create a context profile for your repo using the context generator
  • Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
  • Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
  • Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
• Change your engineering behaviors
  • For PRs that fall outside of the desired spectrum, review the details and check if:
    • Your PR could be split in smaller, self-contained PRs instead
    • Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

• One line was added: +1 -0
• One line was deleted: +0 -1
• One line was modified: +1 -1 (git diff doesn't know about modified, it will
  interpret that line like one addition plus one deletion)
• Change percentiles: Change characteristics (addition, deletion, modification)
  of this PR in relation to all other PRs within the repository.

---

Was this comment helpful? 👍  :ok_hand:  :thumbsdown: (Email)
Customize PullRequestQuantifier for this repository.

[socket-security]

New and removed dependencies detected. Learn more about Socket for GitHub ↗︎

Package	New capabilities	Transitives	Size	Publisher
npm/@types/semver@7.5.8	None	0	23.3 kB	types
npm/commander@12.0.0	environment, filesystem, shell	0	181 kB	abetomo
npm/confusing-browser-globals@1.0.11	None	0	3.87 kB	iansu
npm/postcss@8.4.38	environment, filesystem	+3	368 kB	ai
npm/prompts@2.4.2	None	+2	203 kB	terkelg
npm/undici@6.14.1	environment, network	0	1.11 MB	matteo.collina

🚮 Removed packages: npm/cross-env@7.0.3, npm/postcss-flexbugs-fixes@5.0.2

View full report↗︎

[pull-request-quantifier-deprecated]

This PR has 632 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

---

Quantification details

Label      : Extra Large
Size       : +314 -318
Percentile : 87.73%

Total files changed: 6

Change summary by file extension:
.json : +5 -5
.yaml : +309 -313

Change counts above are quantified counts, based on the PullRequestQuantifier customizations.

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a
balance between between PR complexity and PR review overhead. PRs within the
optimal size (typical small, or medium sized PRs) mean:

• Fast and predictable releases to production:
  • Optimal size changes are more likely to be reviewed faster with fewer
    iterations.
  • Similarity in low PR complexity drives similar review times.
• Review quality is likely higher as complexity is lower:
  • Bugs are more likely to be detected.
  • Code inconsistencies are more likely to be detected.
• Knowledge sharing is improved within the participants:
  • Small portions can be assimilated better.
• Better engineering practices are exercised:
  • Solving big problems by dividing them in well contained, smaller problems.
  • Exercising separation of concerns within the code changes.

What can I do to optimize my changes

• Use the PullRequestQuantifier to quantify your PR accurately
  • Create a context profile for your repo using the context generator
  • Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
  • Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
  • Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
• Change your engineering behaviors
  • For PRs that fall outside of the desired spectrum, review the details and check if:
    • Your PR could be split in smaller, self-contained PRs instead
    • Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

• One line was added: +1 -0
• One line was deleted: +0 -1
• One line was modified: +1 -1 (git diff doesn't know about modified, it will
  interpret that line like one addition plus one deletion)
• Change percentiles: Change characteristics (addition, deletion, modification)
  of this PR in relation to all other PRs within the repository.

---

Was this comment helpful? 👍  :ok_hand:  :thumbsdown: (Email)
Customize PullRequestQuantifier for this repository.

[pull-request-quantifier-deprecated]

This PR has 632 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

---

Quantification details

Label      : Extra Large
Size       : +314 -318
Percentile : 87.73%

Total files changed: 6

Change summary by file extension:
.json : +5 -5
.yaml : +309 -313

Change counts above are quantified counts, based on the PullRequestQuantifier customizations.

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a
balance between between PR complexity and PR review overhead. PRs within the
optimal size (typical small, or medium sized PRs) mean:

• Fast and predictable releases to production:
  • Optimal size changes are more likely to be reviewed faster with fewer
    iterations.
  • Similarity in low PR complexity drives similar review times.
• Review quality is likely higher as complexity is lower:
  • Bugs are more likely to be detected.
  • Code inconsistencies are more likely to be detected.
• Knowledge sharing is improved within the participants:
  • Small portions can be assimilated better.
• Better engineering practices are exercised:
  • Solving big problems by dividing them in well contained, smaller problems.
  • Exercising separation of concerns within the code changes.

What can I do to optimize my changes

• Use the PullRequestQuantifier to quantify your PR accurately
  • Create a context profile for your repo using the context generator
  • Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
  • Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
  • Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
• Change your engineering behaviors
  • For PRs that fall outside of the desired spectrum, review the details and check if:
    • Your PR could be split in smaller, self-contained PRs instead
    • Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

• One line was added: +1 -0
• One line was deleted: +0 -1
• One line was modified: +1 -1 (git diff doesn't know about modified, it will
  interpret that line like one addition plus one deletion)
• Change percentiles: Change characteristics (addition, deletion, modification)
  of this PR in relation to all other PRs within the repository.

---

Was this comment helpful? 👍  :ok_hand:  :thumbsdown: (Email)
Customize PullRequestQuantifier for this repository.

[pull-request-quantifier-deprecated]

This PR has 632 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

---

Quantification details

Label      : Extra Large
Size       : +314 -318
Percentile : 87.73%

Total files changed: 6

Change summary by file extension:
.json : +5 -5
.yaml : +309 -313

Change counts above are quantified counts, based on the PullRequestQuantifier customizations.

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a
balance between between PR complexity and PR review overhead. PRs within the
optimal size (typical small, or medium sized PRs) mean:

• Fast and predictable releases to production:
  • Optimal size changes are more likely to be reviewed faster with fewer
    iterations.
  • Similarity in low PR complexity drives similar review times.
• Review quality is likely higher as complexity is lower:
  • Bugs are more likely to be detected.
  • Code inconsistencies are more likely to be detected.
• Knowledge sharing is improved within the participants:
  • Small portions can be assimilated better.
• Better engineering practices are exercised:
  • Solving big problems by dividing them in well contained, smaller problems.
  • Exercising separation of concerns within the code changes.

What can I do to optimize my changes

• Use the PullRequestQuantifier to quantify your PR accurately
  • Create a context profile for your repo using the context generator
  • Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
  • Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
  • Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
• Change your engineering behaviors
  • For PRs that fall outside of the desired spectrum, review the details and check if:
    • Your PR could be split in smaller, self-contained PRs instead
    • Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

• One line was added: +1 -0
• One line was deleted: +0 -1
• One line was modified: +1 -1 (git diff doesn't know about modified, it will
  interpret that line like one addition plus one deletion)
• Change percentiles: Change characteristics (addition, deletion, modification)
  of this PR in relation to all other PRs within the repository.

---

Was this comment helpful? 👍  :ok_hand:  :thumbsdown: (Email)
Customize PullRequestQuantifier for this repository.

[pull-request-quantifier-deprecated]

This PR has 632 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

---

Quantification details

Label      : Extra Large
Size       : +314 -318
Percentile : 87.73%

Total files changed: 6

Change summary by file extension:
.json : +5 -5
.yaml : +309 -313

Change counts above are quantified counts, based on the PullRequestQuantifier customizations.

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a
balance between between PR complexity and PR review overhead. PRs within the
optimal size (typical small, or medium sized PRs) mean:

• Fast and predictable releases to production:
  • Optimal size changes are more likely to be reviewed faster with fewer
    iterations.
  • Similarity in low PR complexity drives similar review times.
• Review quality is likely higher as complexity is lower:
  • Bugs are more likely to be detected.
  • Code inconsistencies are more likely to be detected.
• Knowledge sharing is improved within the participants:
  • Small portions can be assimilated better.
• Better engineering practices are exercised:
  • Solving big problems by dividing them in well contained, smaller problems.
  • Exercising separation of concerns within the code changes.

What can I do to optimize my changes

• Use the PullRequestQuantifier to quantify your PR accurately
  • Create a context profile for your repo using the context generator
  • Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
  • Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
  • Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
• Change your engineering behaviors
  • For PRs that fall outside of the desired spectrum, review the details and check if:
    • Your PR could be split in smaller, self-contained PRs instead
    • Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

• One line was added: +1 -0
• One line was deleted: +0 -1
• One line was modified: +1 -1 (git diff doesn't know about modified, it will
  interpret that line like one addition plus one deletion)
• Change percentiles: Change characteristics (addition, deletion, modification)
  of this PR in relation to all other PRs within the repository.

---

Was this comment helpful? 👍  :ok_hand:  :thumbsdown: (Email)
Customize PullRequestQuantifier for this repository.

[socket-security]

👍 Dependency issues cleared. Learn more about Socket for GitHub ↗︎

This PR previously contained dependency changes with security issues that have been resolved, removed, or ignored.

View full report↗︎

[renovate]

Renovate Ignore Notification

Because you closed this PR without merging, Renovate will ignore this update. You will not get PRs for any future 9.x releases. But if you manually upgrade to 9.x then Renovate will re-enable minor and patch updates automatically.

If you accidentally closed this PR, or if you changed your mind: rename this PR to get a fresh replacement PR.