Skip to content

A Software-in-the-Loop simulator for a lane keeping assist system (LKAS) using V-REP to validate the LKAS controller and the lane detection algorithm.

License

Notifications You must be signed in to change notification settings

sajid-mohamed/cppVrepLKAS

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

38 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

imacsLKAS

A software-in-the-loop simulator for lane keeping assist system (LKAS) using Vrep and C++. If you are using this framework please refer to the following paper:

[1] S. Mohamed, S. De, K. Bimpisidis, V, Nathan, D. Goswami, H. Corporaal, and T. Basten, “IMACS: A Framework for Performance Evaluation of Image Approximation in a Closed-loop System,” in: MECO, 2019.

The controller is designed in Matlab and the control matrices \Phi, \Gamma, and control gains K (and F) are copied to the src/LaneDetection_and_Control/lateralcontrol_multiple.cpp file. The LKAS controller is designed as explained in the following papers:

[2] S. Mohamed, A. U. Awan, D. Goswami, T. Basten, "Designing image-based control systems considering workload variations," in: CDC, 2019.
[3] S. Mohamed, D. Zhu, D. Goswami, T. Basten, "Optimising quality-of-control for data-intensive multiprocessor image-based control systems considering workload variations," in: DSD, 2018.

An initial framework using Vrep and Matlab has been presented in:

S. Mohamed, D. Zhu, D. Goswami, T. Basten, "DASA: an open-source design, analysis and simulation framework for automotive image-based control systems," in: MCAA Annual Conference, 2019.

Tested using the following versions. If you would like to use latest versions, you might have to edit the syntax of some functions. Tested with the following versions:

  • OS: Ubuntu 18.04
  • g++ (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
  1. Install dependent libraries
  2. Install OpenCV
  3. Install Eigen
  4. Install VREP
  5. Run IMACS_LKAS

It is suggested that you Fork this repository by clicking the "fork" button in the top right. This lets you have your own working copy.

Clone the forked (or directly this) repository:

git clone https://github.com/sajid-mohamed/cppVrepLKAS.git
cd cppVrepLKAS
pwd

For brevity, $(root)=pwd, i.e. the path to cppVrepLKAS is called as $(root).


Setting up cppVrepLKAS in Linux

1. Installing Dependent libraries

The following libraries might be needed for successful execution.

sudo apt-get install libtinfo-dev
sudo apt-get install libjpeg-dev
sudo apt-get install libtiff5-dev
sudo apt-get install libpng-dev
sudo apt-get install jasper
sudo apt-get install libgtk-3-dev
sudo apt-get install libopenblas-dev
sudo apt-get install -y libavcodec-dev
sudo apt-get install -y libavformat-dev
sudo apt-get install libavutil-dev
sudo apt-get install libswscale-dev
sudo apt-get install valgrind
# For openCV installation
sudo apt-get install cmake
## qt4
sudo apt-get install qt4-qmake
sudo apt-get install libqt4-dev

2. Installing OpenCV

If opencv is already installed, go to step 2.2.

2.1. Quick Install OpenCV from Source Code

For detailed OpenCV installation: follow steps from https://docs.opencv.org/trunk/d7/d9f/tutorial_linux_install.html.

cd $(root)/externalApps
git clone https://github.com/opencv/opencv.git
git clone https://github.com/opencv/opencv_contrib.git

externalApps is a folder already available when you git clone cppVrepLKAS. It might be better to include all the external apps in this folder.

# Building OpenCV from Source Using CMake
cd opencv
mkdir build
cd build
cmake -D CMAKE_BUILD_TYPE=Release -D CMAKE_INSTALL_PREFIX=/usr/local .. -DOPENCV_GENERATE_PKGCONFIG=ON
make
sudo make install

Note the path of opencv*.pc file. This is the PKG_CONFIG_PATH. Typically this should be /usr/lib/pkgconfig. If you are using virtual machine this might be /usr/local/lib/pkgconfig.

In case you have errors with ccache (re-)install ccache as shown in FAQ 11.

If you have issues with java, see FAQ 12 and FAQ 13.

2.2. opencv*.pc should be in the PKG_CONFIG_PATH

Make sure opencv*.pc file is in the /usr/lib/pkgconfig or change the PKG_CONFIG_PATH to point to this file. To change path follow the steps in FAQ 3 or FAQ 4 depending on whether you have sudo rights. Remember the path to your opencv installation as OPENCV_PATH.

To check if opencv*.pc is in the /usr/lib/pkgconfig:

cd /usr/lib/pkgconfig
[ -f /usr/lib/pkgconfig/opencv*.pc ] && echo "File exist"

You could also use dlocate to find the file.

If you cannot find it, you might not have done make install in step 2.1.

If the above does not work, try:

sudo apt-get install libopencv-dev

3. Install eigen

cd $(root)/externalApps
git clone https://gitlab.com/libeigen/eigen.git

The path to eigen is needed later for EIGEN_PATH.

4. Install Vrep (CoppeliaSim)

Download the linux version from https://coppeliarobotics.com/downloads.

The license to CoppeliaSim should be obtained from their website.

If you are in an academic institution, you could simply download the Edu version.

Make sure you copy the downloaded file (e.g. CoppeliaSim_Edu_V4_0_0_Ubuntu18_04.tar.xz) to the $(root)/externalApps folder.

cp CoppeliaSim_Edu_V4_0_0_Ubuntu18_04.tar.xz $(root)/externalApps
cd $(root)/externalApps
mkdir vrep
tar -xvf CoppeliaSim_Edu_V4_0_0_Ubuntu18_04.tar.xz -C vrep --strip-components=1

Generally for local tar file:

tar -xvf FILENAME -C FOLDER --strip-components=1

The --strip-components flag is used when a tar file would naturally expand itself into a folder, let say, like github where it examples to repo-name-master folder. Of course you wouldn’t need the first level folder generated here so --strip-components set to 1 would automatically remove that first folder for you. The larger the number is set the deeper nested folders are removed.

The VREP_PATH is then $(root)/externalApps/vrep.

5. Change hardcoded paths

Please change the paths in the following files to the corresponding paths in your own system.

$(root)/cppVrepLKAS.pro
$(root)/src/LaneDetection_and_Control/lane_detection.cpp
  1. If the external applications vrep, eigen or opencv are installed to another directory than the $(root)/externalApps, change the corresponding OPENCV_PATH, PKG_CONFIG_PATH, EIGEN_PATH, and VREP_PATH in cppVrepLKAS.pro to the corresponding PATH in your system.

To obtain the path, you could run pwd in a terminal opened from the corresponding folder.

  1. Change line 121 of lane_detection.cpp to string out_string = "$(root)/out_imgs";.

How to Run imacsLKAS

cd $(root)
bash run.sh

The steps included in the bash script run.sh are the following:

1. Generate Makefile for imacsLKAS

Generate the Makefile using qmake.

cd $(root)
qmake cppVrepLKAS.pro
make

When you want to run make in $(root) always run qmake cppVrepLKAS.pro first. make clean cleans the files generated by this make.

2. Start a vrep scene

Open a vrep-scene. Vrep needs to be started before running IMACS framework.

cd $VREP_PATH
./coppeliaSim.sh ../../vrep-scenes/SmallBias_report.ttt

If you are using an older version of vrep (coppeliaSim.sh is not found), please use the following command:

./vrep.sh ../../vrep-scenes/EnterCurveTest.ttt

3. Run imacsLKAS (in a new terminal)

cd $(root)
# Usage: ./imacsLKAS {version} {simstep}
# Minimum one argument needed. (default values) ./imacs 1 0.005
./imacsLKAS 1

There might be some dialog windows opening in VREP if you are running it for the first time. This is normal.

You do not have to always close vrep to run imacs again. Just stop simulation in vrep and wait for sometime before executing ./imacsLKAS 1 0.005.

In case you encounter some other errors, you can debug using the following command:

valgrind ./imacsLKAS 1

File Structure

File Name Description
src/cpp_vrep_api/cpp_vrep_framework.cpp Main file; The framework initialisation variables are defined here. The synchronous (lock-step) simulation is also enforced here.
src/cpp_vrep_api/my_vrep_api.cpp Functions needed to setup the VREP API.
src/LaneDetection_and_Control/lane_detection.cpp The image processing (perception) is defined here.
src/LaneDetection_and_Control/lateralcontrol_multiple.cpp The controller is defined here.
include/config.hpp Declarations of the variables in the above two files can be found here.

How to use imacsLKAS

The main file: src/cpp_vrep_api/cpp_vrep_framework.cpp

  • The simulation step time, the total simulation time, the initial wait time, the sampling period(s) and delay(s) are hardcoded in this file.
  • If you want to add additional input arguments for imacsLKAS, you should do this here.

Controller Design: src/LaneDetection_and_Control/lateralcontrol_multiple.cpp

  • The controller matrices are stored in this file. \Phi, \Gamma and K for multiple controllers are stored in the variables m_phi_aug, m_Gamma_aug and m_K2c.
  • The controller currently used is an optimal LQR control for a regulation problem where the objective is for the output to reach zero. If you want to change the type of controller you can edit the function lateralController::compute_steering_angles().

Image Processing: src/LaneDetection_and_Control/lane_detection.cpp

  • This file contains the image processing steps. Currently, we do the steps mentioned in [1]. You should be changing the functions in this file to include your own image processing algorithm.

FAQs

1. When running make in $(IMACSROOT): the following warnings (many) are also observed by us and is normal. We are working on improving this in a later version.

matrix.hpp [-Wreorder]
GivensQR.hpp [-Wreorder]
extApiPlatform.c [-Wunused-result]

2. If you receive the following errors, wait for some time before running the command ./imacsLKAS 1 If that does not work, close and reopen vrep.

$(ROOT)/src/cpp_vrep_api/my_vrep_api.cpp:59: vrepAPI::vrepAPI(): Assertion `m_clientID != -1 && "V-REP must be started: ./vrep.sh ../../vrep-scenes/EnterCurveTest.ttt"' failed.
OpenCV Error: Assertion failed (mv && n > 0) in merge, file /home/om/hd/infra/build_opencv/opencv/modules/core/src/convert.cpp, line 327
terminate called after throwing an instance of 'cv::Exception'
  what():  /home/om/hd/infra/build_opencv/opencv/modules/core/src/convert.cpp:327: error: (-215) mv && n > 0 in function merge

3. Exporting paths permanently with sudo rights

cd
sudo gedit .bash_profile

Add the export path commands in `.bash_profile' as shown below.

export PKG_CONFIG_PATH=$PKG_CONFIG_PATH:/usr/lib/pkgconfig/

Save and close .bash_profile. Then, open .bashrc.

sudo gedit .bashrc

Add the following line at the end of .bashrc.

source ~/.bash_profile

Save and close the file. Now, the paths should be exported everytime you open a terminal.

4. Exporting paths without sudo rights

If you want to export paths permanently, Open a terminal window using Ctrl+Alt+T Run the command

gedit ~/.profile

Add the line(s) to the bottom of this file and save.

export PKG_CONFIG_PATH=/usr/lib/pkgconfig/

Log out and log in again. A safer way is to use quotes. Doing so is necessary if one or more directories in the original PATH contain spaces. E.g.:

export CLANG="$(root)/clang+llvm-9.0.0-x86_64-linux-gnu-ubuntu-18.04/bin/clang"

Alternatively, you can set the paths in paths.sh and then source paths. Do not forget to include export command in the description here.

cd $(IMACSROOT)
source paths.sh

5. The simulation time is hardcoded to 15 in src/cpp_vrep_api/cpp_vrep_framework.cpp. This may result in erroneous behaviour after the simulation exceeds this time.

Change line 43 in src/cpp_vrep_api/cpp_vrep_framework.cpp if you want to simulate for a longer time, i.e. int simulation_time = 100; if you want to logically simulate for 100 sec.

6. How to start a straight road scene?

To start a straight road scene (see vrep-scenes/SmallBias_report.ttt), replace line 7 in run.sh with the following

gnome-terminal -- sh -c 'cd externalApps/vrep; ./coppeliaSim.sh ../../vrep-scenes/SmallBias_report.ttt; exec bash'

7. Points to remember if running the framework using bash run.sh

If you are making changes to the cppVrepLKAS.pro file, you would have to run the command make clean first in the terminal before running bash run.sh.

make clean
bash run.sh

8. Control design: relation of matlab control codes in [1],[2] and [3] to the framework

The lateralcontrol_multiple.cpp has a sample controller implemented.

You are required to adapt the codes according to the control design you choose (especially the lateralController::compute_steering_angles() function). Ideally, you should rewrite the lateralController::compute_steering_angles() function.

Matlab variable Framework equivalent Files to change
phi m_phi_aug src/laneDetection_and_Control/lateralcontrol_multiple.cpp, include/config.hpp:76-83
Gamma m_Gamma_aug src/laneDetection_and_Control/lateralcontrol_multiple.cpp, include/config.hpp:76-83
K m_K2c src/laneDetection_and_Control/lateralcontrol_multiple.cpp, include/config.hpp:76-83
T m_T src/laneDetection_and_Control/lateralcontrol_multiple.cpp, include/config.hpp:76-83
h period_s src/cpp_vrep_api/cpp_vrep_framework.cpp:72
tau delay_s src/cpp_vrep_api/cpp_vrep_framework.cpp:73

9. Some variable descriptions

Variable Description Files to change
simstep Simulation step time: calculated as a greatest common factor between h and tau. A really low value would slow down the simulation. src/cpp_vrep_api/cpp_vrep_framework.cpp:42
simulation_time Total simulation time: total logical time for which you want to run the simulation. src/cpp_vrep_api/cpp_vrep_framework.cpp:43
wait_time Initialisation time for which the controller is inactive. May be needed to achieve required vehicle speed or for getting the initial frame. (set this to 2.5 seconds, if getting errors). src/cpp_vrep_api/cpp_vrep_framework.cpp

10. Implementing pipelining

The current code is for sequential implementation. To enforce pipelining, you have to change src/cpp_vrep_api/cpp_vrep_framework.cpp:123-134. Especially, have an array of control inputs (steering_angle values) and only actuate corresponding to the sampling period.

To implement the pipelining, you would also have to amend src/cpp_vrep_api/cpp_vrep_framework.cpp:129 to send the corresponding steering_angle instead of the latest one. You might also have to edit VrepAPI.sim_delay(time_step) accordingly.

11. Installing ccache

sudo apt install -y ccache
sudo /usr/sbin/update-ccache-symlinks
echo 'export PATH="/usr/lib/ccache:$PATH"' | tee -a ~/.bashrc
source ~/.bashrc && echo $PATH

12. Installing java

You can follow the tutorial here: https://www.digitalocean.com/community/tutorials/how-to-install-java-with-apt-on-ubuntu-18-04.

13. Error: unable to locate *.jar

sudo apt install default-jre
sudo apt install default-jdk
sudo update-alternatives --config javac
sudo update-alternatives --config java

Choose the correct jdk version. jre does not have tools.jar Update the JAVA_HOME path

sudo gedit /etc/environment

At the end of this file, add the following line, making sure to replace the path with your own copied path:

JAVA_HOME="/usr/lib/jvm/java-11-openjdk-amd64/bin/"

Modifying this file will set the JAVA_HOME path for all users on your system. Save the file and exit the editor.

Now reload this file to apply the changes to your current session:

source /etc/environment

If you do not have sudo access, follow the steps in FAQ 4.

About

A Software-in-the-Loop simulator for a lane keeping assist system (LKAS) using V-REP to validate the LKAS controller and the lane detection algorithm.

Topics

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published