v6.8-rc4-scx1 #9
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
scx: Print p->cpus_ptr when dumping scheduler state
…x/kernel/git/joro/iommu Pul iommu fixes from Joerg Roedel: - Make iommu_ops->default_domain work without CONFIG_IOMMU_DMA to fix initialization of FSL-PAMU devices - Fix for Tegra fbdev initialization failure - Fix for a VFIO device unbinding failure on PowerPC * tag 'iommu-fixes-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: powerpc: iommu: Bring back table group release_ownership() call drm/tegra: Do not assume that a NULL domain means no DMA IOMMU iommu: Allow ops->default_domain to work when !CONFIG_IOMMU_DMA
…git/sre/linux-power-supply Pull power supply fix from Sebastian Reichel: - qcom_battmgr: revert broken fix * tag 'for-v6.8-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: Revert "power: supply: qcom_battmgr: Register the power supplies after PDR is up"
…kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - pmbus/mp2975: Fix driver initialization - gigabyte_waterforce: Add missing unlock in error handling path * tag 'hwmon-for-v6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (pmbus/mp2975) Correct comment inside 'mp2975_read_byte_data' hwmon: (pmbus/mp2975) Fix driver initialization for MP2975 device hwmon: gigabyte_waterforce: Fix locking bug in waterforce_get_status()
…l/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of fixes, mostly device-specific ones: - Minor PCM core fix for name strings - ASoC Qualcomm fixes, including DAI support extensions - ASoC AMD platform updates - ASoC Allwinner platform updates - Various ASoC codec fixes for WSA, WCD, ES8326 drivers - Various HD-audio and USB-audio fixes and quirks - A series of fixes for Cirrus CS35L56 codecs" * tag 'sound-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (63 commits) ALSA: usb-audio: Ignore clock selector errors for single connection ALSA: hda/realtek: Enable headset mic on Vaio VJFE-ADL ALSA: hda: cs35l56: Remove unused test stub function ALSA: hda: cs35l56: Firmware file must match the version of preloaded firmware ALSA: hda: cs35l56: Fix filename string field layout ALSA: hda: cs35l56: Fix order of searching for firmware files ASoC: cs35l56: Allow more time for firmware to boot ASoC: cs35l56: Load tunings for the correct speaker models ASoC: cs35l56: Firmware file must match the version of preloaded firmware ASoC: cs35l56: Fix misuse of wm_adsp 'part' string for silicon revision ASoC: cs35l56: Fix for initializing ASP1 mixer registers ALSA: hda: cs35l56: Initialize all ASP1 registers ASoC: cs35l56: Fix default SDW TX mixer registers ASoC: cs35l56: Fix to ensure ASP1 registers match cache ASoC: cs35l56: Remove buggy checks from cs35l56_is_fw_reload_needed() ASoC: cs35l56: Don't add the same register patch multiple times ASoC: cs35l56: cs35l56_component_remove() must clean up wm_adsp ASoC: cs35l56: cs35l56_component_remove() must clear cs35l56->component ASoC: wm_adsp: Don't overwrite fwf_name with the default ASoC: wm_adsp: Fix firmware file search order ...
…kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - a fix for the fix to deal with newer laptops which get confused by the "GET ID" command when probing for PS/2 keyboards - a couple of tweaks to i8042 to handle Clevo NS70PU and Lifebook U728 laptops - a change to bcm5974 to validate that the device has appropriate endpoints - an addition of new product ID to xpad driver to recognize Lenovo Legion Go controllers - a quirk to Goodix controller to deal with extra GPIO described in ACPI tables on some devices. * tag 'input-for-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - add Fujitsu Lifebook U728 to i8042 quirk table Input: i8042 - fix strange behavior of touchpad on Clevo NS70PU Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID Input: atkbd - skip ATKBD_CMD_SETLEDS when skipping ATKBD_CMD_GETID Input: bcm5974 - check endpoint type before starting traffic Input: xpad - add Lenovo Legion Go controllers Input: goodix - accept ACPI resources with gpio_count == 3 && gpio_int_idx == 0
…/drm
Pul drm fixes from Dave Airlie:
"Regular weekly fixes, mostly amdgpu and xe. One nouveau fix is a
better fix for the deadlock and also helps with a sync race we were
seeing.
dma-buf:
- heaps CMA page accounting fix
virtio-gpu:
- fix segment size
xe:
- A crash fix
- A fix for an assert due to missing mem_acces ref
- Only allow a single user-fence per exec / bind.
- Some sparse warning fixes
- Two fixes for compilation failures on various odd combinations of
gcc / arch pointed out on LKML.
- Fix a fragile partial allocation pointed out on LKML.
- A sysfs ABI documentation warning fix
amdgpu:
- Fix reboot issue seen on some 7000 series dGPUs
- Fix client init order for KFD
- Misc display fixes
- USB-C fix
- DCN 3.5 fixes
- Fix issues with GPU scheduler and GPU reset
- GPU firmware loading fix
- Misc fixes
- GC 11.5 fix
- VCN 4.0.5 fix
- IH overflow fix
amdkfd:
- SVM fixes
- Trap handler fix
- Fix device permission lookup
- Properly reserve BO before validating it
nouveau:
- fence/irq lock deadlock fix (second attempt)
- gsp command size fix
* tag 'drm-fixes-2024-02-03' of git://anongit.freedesktop.org/drm/drm: (35 commits)
nouveau: offload fence uevents work to workqueue
nouveau/gsp: use correct size for registry rpc.
drm/amdgpu/pm: Use inline function for IP version check
drm/hwmon: Fix abi doc warnings
drm/xe: Make all GuC ABI shift values unsigned
drm/xe/vm: Subclass userptr vmas
drm/xe: Use LRC prefix rather than CTX prefix in lrc desc defines
drm/xe: Don't use __user error pointers
drm/xe: Annotate mcr_[un]lock()
drm/xe: Only allow 1 ufence per exec / bind IOCTL
drm/xe: Grab mem_access when disabling C6 on skip_guc_pc platforms
drm/xe: Fix crash in trace_dma_fence_init()
drm/amdgpu: Reset IH OVERFLOW_CLEAR bit
drm/amdgpu: remove asymmetrical irq disabling in vcn 4.0.5 suspend
drm/amdgpu: drm/amdgpu: remove golden setting for gfx 11.5.0
drm/amdkfd: reserve the BO before validating it
drm/amdgpu: Fix missing error code in 'gmc_v6/7/8/9_0_hw_init()'
drm/amd/display: Fix buffer overflow in 'get_host_router_total_dp_tunnel_bw()'
drm/amd/display: Add NULL check for kzalloc in 'amdgpu_dm_atomic_commit_tail()'
drm/amd: Don't init MEC2 firmware when it fails to load
...
…rnel/git/pci/pci Pull pci fixes from Bjorn Helgaas: - Fix a potential deadlock that was reintroduced by an ASPM revert merged for v6.8 (Johan Hovold) - Add Manivannan Sadhasivam as PCI Endpoint maintainer (Lorenzo Pieralisi) * tag 'pci-v6.8-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: MAINTAINERS: Add Manivannan Sadhasivam as PCI Endpoint maintainer PCI/ASPM: Fix deadlock when enabling ASPM
…x/kernel/git/gfs2/linux-gfs2 Pull gfs2 revert from Andreas Gruenbacher: "It turns out that the commit to use GL_NOBLOCK flag for non-blocking lookups has several issues, and not all of them have a simple fix" * tag 'gfs2-v6.8-rc2-revert' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: Revert "gfs2: Use GL_NOBLOCK flag for non-blocking lookups"
…el/git/trace/linux-trace Pull tracing and eventfs fixes from Steven Rostedt: - Fix the return code for ring_buffer_poll_wait() It was returing a -EINVAL instead of EPOLLERR. - Zero out the tracefs_inode so that all fields are initialized. The ti->private could have had stale data, but instead of just initializing it to NULL, clear out the entire structure when it is allocated. - Fix a crash in timerlat The hrtimer was initialized at read and not open, but is canceled at close. If the file was opened and never read the close will pass a NULL pointer to hrtime_cancel(). - Rewrite of eventfs. Linus wrote a patch series to remove the dentry references in the eventfs_inode and to use ref counting and more of proper VFS interfaces to make it work. - Add warning to put_ei() if ei is not set to free. That means something is about to free it when it shouldn't. - Restructure the eventfs_inode to make it more compact, and remove the unused llist field. - Remove the fsnotify*() funtions for when the inodes were being created in the lookup code. It doesn't make sense to notify about creation just because something is being looked up. - The inode hard link count was not accurate. It was being updated when a file was looked up. The inodes of directories were updating their parent inode hard link count every time the inode was created. That means if memory reclaim cleaned a stale directory inode and the inode was lookup up again, it would increment the parent inode again as well. Al Viro said to just have all eventfs directories have a hard link count of 1. That tells user space not to trust it. * tag 'trace-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: eventfs: Keep all directory links at 1 eventfs: Remove fsnotify*() functions from lookup() eventfs: Restructure eventfs_inode structure to be more condensed eventfs: Warn if an eventfs_inode is freed without is_freed being set tracing/timerlat: Move hrtimer_init to timerlat_fd open() eventfs: Get rid of dentry pointers without refcounts eventfs: Clean up dentry ops and add revalidate function eventfs: Remove unused d_parent pointer field tracefs: dentry lookup crapectomy tracefs: Avoid using the ei->dentry pointer unnecessarily eventfs: Initialize the tracefs inode properly tracefs: Zero out the tracefs_inode when allocating it ring-buffer: Clean ring_buffer_poll_wait() error return
Function aq_ring_hwts_rx_alloc() maps extra AQ_CFG_RXDS_DEF bytes for PTP HWTS ring but then generic aq_ring_free() does not take this into account. Create and use a specific function to free HWTS ring to fix this issue. Trace: [ 215.351607] ------------[ cut here ]------------ [ 215.351612] DMA-API: atlantic 0000:4b:00.0: device driver frees DMA memory with different size [device address=0x00000000fbdd0000] [map size=34816 bytes] [unmap size=32768 bytes] [ 215.351635] WARNING: CPU: 33 PID: 10759 at kernel/dma/debug.c:988 check_unmap+0xa6f/0x2360 ... [ 215.581176] Call Trace: [ 215.583632] <TASK> [ 215.585745] ? show_trace_log_lvl+0x1c4/0x2df [ 215.590114] ? show_trace_log_lvl+0x1c4/0x2df [ 215.594497] ? debug_dma_free_coherent+0x196/0x210 [ 215.599305] ? check_unmap+0xa6f/0x2360 [ 215.603147] ? __warn+0xca/0x1d0 [ 215.606391] ? check_unmap+0xa6f/0x2360 [ 215.610237] ? report_bug+0x1ef/0x370 [ 215.613921] ? handle_bug+0x3c/0x70 [ 215.617423] ? exc_invalid_op+0x14/0x50 [ 215.621269] ? asm_exc_invalid_op+0x16/0x20 [ 215.625480] ? check_unmap+0xa6f/0x2360 [ 215.629331] ? mark_lock.part.0+0xca/0xa40 [ 215.633445] debug_dma_free_coherent+0x196/0x210 [ 215.638079] ? __pfx_debug_dma_free_coherent+0x10/0x10 [ 215.643242] ? slab_free_freelist_hook+0x11d/0x1d0 [ 215.648060] dma_free_attrs+0x6d/0x130 [ 215.651834] aq_ring_free+0x193/0x290 [atlantic] [ 215.656487] aq_ptp_ring_free+0x67/0x110 [atlantic] ... [ 216.127540] ---[ end trace 6467e5964dd2640b ]--- [ 216.132160] DMA-API: Mapped at: [ 216.132162] debug_dma_alloc_coherent+0x66/0x2f0 [ 216.132165] dma_alloc_attrs+0xf5/0x1b0 [ 216.132168] aq_ring_hwts_rx_alloc+0x150/0x1f0 [atlantic] [ 216.132193] aq_ptp_ring_alloc+0x1bb/0x540 [atlantic] [ 216.132213] aq_nic_init+0x4a1/0x760 [atlantic] Fixes: 94ad945 ("net: aquantia: add PTP rings infrastructure") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20240201094752.883026-1-ivecera@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The udpgro_fwd.sh self-tests are somewhat unstable. There are a few timing constraints the we struggle to meet on very slow environments. Instead of skipping the whole tests in such envs, increase the test resilience WRT very slow hosts: increase the inter-packets timeouts, avoid resetting the counters every second and finally disable reduce the background traffic noise. Tested with: for I in $(seq 1 100); do ./tools/testing/selftests/kselftest_install/run_kselftest.sh \ -t net:udpgro_fwd.sh || exit -1 done in a slow environment. Fixes: a062260 ("selftests: net: add UDP GRO forwarding self-tests") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/f4b6b11064a0d39182a9ae6a853abae3e9b4426a.1706812005.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The setup_ns helper marks the testns global variable as readonly. Later attempts to set such variable are unsuccessful, causing a couple test failures. Avoid completely the variable re-initialization and let the function access the global value. Fixes: e9ce7ed ("selftests: rtnetlink: use setup_ns in bonding test") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/6e7c937c8ff73ca52a21a4a536a13a76ec0173a8.1706812005.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The pmtu.sh test uses a few TCP listener in a problematic way: It hard-codes a constant timeout to wait for the listener starting-up in background. That introduces unneeded latency and on very slow and busy host it can fail. Additionally the test starts again the same listener in the same namespace on the same port, just after the previous connection completed. Fast host can attempt starting the new server before the old one really closed the socket. Address the issues using the wait_local_port_listen helper and explicitly waiting for the background listener process exit. Fixes: 136a1b4 ("selftests: net: test vxlan pmtu exceptions with tcp") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/f8e8f6d44427d8c45e9f6a71ee1a321047452087.1706812005.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using hard-coded constant timeout to wait for some expected event is deemed to fail sooner or later, especially in slow env. Our CI has spotted another of such race: # TEST: ipv6: cleanup of cached exceptions - nexthop objects [FAIL] # can't delete veth device in a timely manner, PMTU dst likely leaked Replace the crude sleep with a loop looking for the expected condition at low interval for a much longer range. Fixes: b3cc4f8 ("selftests: pmtu: add explicit tests for PMTU exceptions cleanup") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/fd5c745e9bb665b724473af6a9373a8c2a62b247.1706812005.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni says: ==================== selftests: net: more fixes Another small bunch of fixes, addressing issues outlined by the netdev CI. The first 2 patches are just rebased. The following 2 are new fixes, for even more problems that surfaced meanwhile. ==================== Link: https://lore.kernel.org/r/cover.1706812005.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For XDP_TX action xdp_buff is converted to xdp_frame. The conversion is done by xdp_convert_buff_to_frame(). The memory type of the resulting xdp_frame depends on the memory type of the xdp_buff. For page pool based xdp_buff it produces xdp_frame with memory type MEM_TYPE_PAGE_POOL. For zero copy XSK pool based xdp_buff it produces xdp_frame with memory type MEM_TYPE_PAGE_ORDER0. tsnep_xdp_xmit_back() is not prepared for that and uses always the page pool buffer type TSNEP_TX_TYPE_XDP_TX. This leads to invalid mappings and the transmission of undefined data. Improve tsnep_xdp_xmit_back() to use the generic buffer type TSNEP_TX_TYPE_XDP_NDO for zero copy XDP_TX. Fixes: 3fc2333 ("tsnep: Add XDP socket zero-copy RX support") Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
If the ICMPv6 error is built from a non-linear skb we get the following splat, BUG: KASAN: slab-out-of-bounds in do_csum+0x220/0x240 Read of size 4 at addr ffff88811d402c80 by task netperf/820 CPU: 0 PID: 820 Comm: netperf Not tainted 6.8.0-rc1+ #543 ... kasan_report+0xd8/0x110 do_csum+0x220/0x240 csum_partial+0xc/0x20 skb_tunnel_check_pmtu+0xeb9/0x3280 vxlan_xmit_one+0x14c2/0x4080 vxlan_xmit+0xf61/0x5c00 dev_hard_start_xmit+0xfb/0x510 __dev_queue_xmit+0x7cd/0x32a0 br_dev_queue_push_xmit+0x39d/0x6a0 Use skb_checksum instead of csum_partial who cannot deal with non-linear SKBs. Fixes: 4cb47a8 ("tunnels: PMTU discovery support for directly bridged IP packets") Signed-off-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
When alloc_scq fails, card->vcs[0] (i.e. vc) should be freed. Otherwise,
in the following call chain:
idt77252_init_one
|-> idt77252_dev_open
|-> open_card_ubr0
|-> alloc_scq [failed]
|-> deinit_card
|-> vfree(card->vcs);
card->vcs is freed and card->vcs[0] is leaked.
Fixes: 1da177e ("Linux-2.6.12-rc2")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When qmem_alloc and pfvf->hw_ops->sq_aq_init fails, sq->sg should be freed to prevent memleak. Fixes: c9c12d3 ("octeontx2-pf: Add support for PTP clock") Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn> Acked-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
…l.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
"Vendor events:
- Intel Alderlake/Sapphire Rapids metric fixes, the CPU type
("cpu_atom", "cpu_core") needs to be used as a prefix to be
considered on a metric formula, detected via one of the 'perf test'
entries.
'perf test' fixes:
- Fix the creation of event selector lists on 'perf test' entries, by
initializing the sample ID flag, which is done by 'perf record', so
this fix affects only the tests, the common case isn't affected
- Make 'perf list' respect debug settings (-v) to fix its 'perf test'
entry
- Fix 'perf script' test when python support isn't enabled
- Special case 'perf script' tests on s390, where only DWARF call
graphs are supported and only on software events
- Make 'perf daemon' signal test less racy
Compiler warnings/errors:
- Remove needless malloc(0) call in 'perf top' that triggers
-Walloc-size
- Fix calloc() argument order to address error introduced in gcc-14
Build:
- Make minimal shellcheck version to v0.6.0, avoiding the build to
fail with older versions
Sync kernel header copies:
- stat.h to pick STATX_MNT_ID_UNIQUE
- msr-index.h to pick IA32_MKTME_KEYID_PARTITIONING
- drm.h to pick DRM_IOCTL_MODE_CLOSEFB
- unistd.h to pick {list,stat}mount,
lsm_{[gs]et_self_attr,list_modules} syscall numbers
- x86 cpufeatures to pick TDX, Zen, APIC MSR fence changes
- x86's mem{cpy,set}_64.S used in 'perf bench'
- Also, without tooling effects: asm-generic/unaligned.h, mount.h,
fcntl.h, kvm headers"
* tag 'perf-tools-fixes-for-v6.8-1-2024-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (21 commits)
perf tools headers: update the asm-generic/unaligned.h copy with the kernel sources
tools include UAPI: Sync linux/mount.h copy with the kernel sources
perf evlist: Fix evlist__new_default() for > 1 core PMU
tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench'
tools headers x86 cpufeatures: Sync with the kernel sources to pick TDX, Zen, APIC MSR fence changes
tools headers UAPI: Sync unistd.h to pick {list,stat}mount, lsm_{[gs]et_self_attr,list_modules} syscall numbers
perf vendor events intel: Alderlake/sapphirerapids metric fixes
tools headers UAPI: Sync kvm headers with the kernel sources
perf tools: Fix calloc() arguments to address error introduced in gcc-14
perf top: Remove needless malloc(0) call that triggers -Walloc-size
perf build: Make minimal shellcheck version to v0.6.0
tools headers UAPI: Update tools's copy of drm.h headers to pick DRM_IOCTL_MODE_CLOSEFB
perf test shell daemon: Make signal test less racy
perf test shell script: Fix test for python being disabled
perf test: Workaround debug output in list test
perf list: Add output file option
perf list: Switch error message to pr_err() to respect debug settings (-v)
perf test: Fix 'perf script' tests on s390
tools headers UAPI: Sync linux/fcntl.h with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources to pick IA32_MKTME_KEYID_PARTITIONING
...
Jonathan reports that CXL CPER events dump an extra generic error
message.
{1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1
{1}[Hardware Error]: event severity: recoverable
{1}[Hardware Error]: Error 0, type: recoverable
{1}[Hardware Error]: section type: unknown, fbcd0a77-c260-417f-85a9-088b1621eba6
{1}[Hardware Error]: section length: 0x90
{1}[Hardware Error]: 00000000: 00000090 00000007 00000000 0d938086 ................
{1}[Hardware Error]: 00000010: 00100000 00000000 00040000 00000000 ................
...
CXL events were rerouted though the CXL subsystem for additional
processing. However, when that work was done it was missed that
cper_estatus_print_section() continued with a generic error message
which is confusing.
Teach CPER print code to ignore printing details of some section types.
Assign the CXL event GUIDs to this set to prevent confusing unknown
prints.
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
CPER events don't have UUIDs. Therefore UUIDs were removed from the records passed to trace events and replaced with hard coded values. As pointed out by Jonathan, the new defines for the UUIDs present a more efficient way to assign UUID in trace records.[1] Replace memcpy's with the use of static data. [1] https://lore.kernel.org/all/20240108132325.00000e9c@Huawei.com/ Suggested-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
…nux/kernel/git/andi.shyti/linux into i2c/for-current Just a maintenance patch that updates the repository where the i2c host and muxes related patches will be collected.
This can be used to implement interlocking against dequeue. e.g, Let's say there is one dsq per CPU and the scheduler can stall if a task is dispatched to a dsq which doesn't intersect with p->cpus_ptr. In the dispatch path, if you do the following: if (bpf_cpumask_test_cpu(target_cpu, p->cpus_ptr)) scx_bpf_dispatch(p, target_dsq, slice, 0); The task can still end up in the wrong dsq because the cpumask can change between bpf_cpumask_test_cpu() and scx_bpf_dispatch(). However, scx_bpf_dispatch(p, target_dsq, slice, 0); if (!bpf_cpumask_test_cpu(target_cpu, p->cpus_ptr)) scx_bpf_dispatch_cancel(); eliminates the race window - either the set_cpumask path sees the task dispatched or the dispatch path sees the updated cpumask. In both cases, the dispatch gets canceled as it should. Note that in schedules which don't implement .dequeue(), depending on the implementation, there can be multiple enqueued instances of the same task. However, as long as the scheduler guarantees that there is at least one dispatch attempt on the task since the last enqueueing and that dispatch attempt interlocks against the dequeue path as above, it's guaranteed to not act upon stale information or miss dispatching an enqueued task. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Andrea Righi <andrea.righi@canonical.com>
…l/git/phy/linux-phy Pull phy driver fixes from Vinod Koul: - TI null pointer dereference - missing erdes mux entry in lan966x driver - Return of error code in renesas driver - Serdes init sequence and register offsets for IPQ drivers * tag 'phy-fixes-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: ti: phy-omap-usb2: Fix NULL pointer dereference for SRP phy: lan966x: Add missing serdes mux entry phy: renesas: rcar-gen3-usb2: Fix returning wrong error code phy: qcom-qmp-usb: fix serdes init sequence for IPQ6018 phy: qcom-qmp-usb: fix register offsets for ipq8074/ipq6018
…ernel/git/vkoul/dmaengine Pull dmaengine fixes from Vinod Koul: "Core: - fix return value of is_slave_direction() for D2D dma Driver fixes for: - Documentaion fixes to resolve warnings for at_hdmac driver - bunch of fsl driver fixes for memory leaks, and useless kfree - TI edma and k3 fixes for packet error and null pointer checks" * tag 'dmaengine-fix-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dmaengine: at_hdmac: add missing kernel-doc style description dmaengine: fix is_slave_direction() return false when DMA_DEV_TO_DEV dmaengine: fsl-qdma: Remove a useless devm_kfree() dmaengine: fsl-qdma: Fix a memory leak related to the queue command DMA dmaengine: fsl-qdma: Fix a memory leak related to the status queue DMA dmaengine: ti: k3-udma: Report short packet errors dmaengine: ti: edma: Add some null pointer checks to the edma_probe dmaengine: fsl-dpaa2-qdma: Fix the size of dma pools dmaengine: at_hdmac: fix some kernel-doc warnings
…nel/git/wsa/linux Pull i2c fixlet from Wolfram Sang: "MAINTAINERS update to point people to the new tree for i2c host driver changes" * tag 'i2c-for-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: MAINTAINERS: Update i2c host drivers repository
…git/gregkh/usb Pull USB driver fixes from Greg KH: "Here are a bunch of small USB driver fixes for 6.8-rc3. Included in here are: - new usb-serial driver ids - new dwc3 driver id added - typec driver change revert - ncm gadget driver endian bugfix - xhci bugfixes for a number of reported issues - usb hub bugfix for alternate settings - ulpi driver debugfs memory leak fix - chipidea driver bugfix - usb gadget driver fixes All of these have been in linux-next for a while with no reported issues" * tag 'usb-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits) USB: serial: option: add Fibocom FM101-GL variant USB: serial: qcserial: add new usb-id for Dell Wireless DW5826e USB: serial: cp210x: add ID for IMST iM871A-USB usb: typec: tcpm: fix the PD disabled case usb: ucsi_acpi: Quirk to ack a connector change ack cmd usb: ucsi_acpi: Fix command completion handling usb: ucsi: Add missing ppm_lock usb: ulpi: Fix debugfs directory leak Revert "usb: typec: tcpm: fix cc role at port reset" usb: gadget: pch_udc: fix an Excess kernel-doc warning usb: f_mass_storage: forbid async queue when shutdown happen USB: hub: check for alternate port before enabling A_ALT_HNP_SUPPORT usb: chipidea: core: handle power lost in workqueue usb: dwc3: gadget: Fix NULL pointer dereference in dwc3_gadget_suspend usb: dwc3: pci: add support for the Intel Arrow Lake-H usb: core: Prevent null pointer dereference in update_port_device_state xhci: handle isoc Babble and Buffer Overrun events properly xhci: process isoc TD properly when there was a transaction error mid TD. xhci: fix off by one check when adding a secondary interrupter. xhci: fix possible null pointer dereference at secondary interrupter removal ...
…git/gregkh/tty Pull tty and serial driver fixes from Greg KH: "Here are some small tty and serial driver fixes for 6.8-rc3 that resolve a number of reported issues. Included in here are: - rs485 flag definition fix that affected the user/kernel abi in -rc1 - max310x driver fixes - 8250_pci1xxxx driver off-by-one fix - uart_tiocmget locking race fix All of these have been in linux-next for over a week with no reported issues" * tag 'tty-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: max310x: prevent infinite while() loop in port startup serial: max310x: fail probe if clock crystal is unstable serial: max310x: improve crystal stable clock detection serial: max310x: set default value when reading clock ready bit serial: core: Fix atomicity violation in uart_tiocmget serial: 8250_pci1xxxx: fix off by one in pci1xxxx_process_read_data() tty: serial: Fix bit order in RS485 flag definitions
When a tcon is marked for need_reconnect, the intention is to have it reconnected. This change adjusts tcon->status in cifs_tree_connect when need_reconnect is set. Also, this change has a minor correction in resetting need_reconnect on success. It makes sure that it is done with tc_lock held. Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Based on our implementation of multichannel, it is entirely possible that a server struct may not be found in any channel of an SMB session. In such cases, we should be prepared to move on and search for the server struct in the next session. Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
When a user tries to use the "sec=krb5p" mount parameter to encrypt
data on connection to a server (when authenticating with Kerberos), we
indicate that it is not supported, but do not note the equivalent
recommended mount parameter ("sec=krb5,seal") which turns on encryption
for that mount (and uses Kerberos for auth). Update the warning message.
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We've had issues with gcc and 'asm goto' before, and we created a 'asm_volatile_goto()' macro for that in the past: see commits 3f0116c ("compiler/gcc4: Add quirk for 'asm goto' miscompilation bug") and a9f1803 ("compiler/gcc4: Make quirk for asm_volatile_goto() unconditional"). Then, much later, we ended up removing the workaround in commit 43c249e ("compiler-gcc.h: remove ancient workaround for gcc PR 58670") because we no longer supported building the kernel with the affected gcc versions, but we left the macro uses around. Now, Sean Christopherson reports a new version of a very similar problem, which is fixed by re-applying that ancient workaround. But the problem in question is limited to only the 'asm goto with outputs' cases, so instead of re-introducing the old workaround as-is, let's rename and limit the workaround to just that much less common case. It looks like there are at least two separate issues that all hit in this area: (a) some versions of gcc don't mark the asm goto as 'volatile' when it has outputs: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98619 https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110420 which is easy to work around by just adding the 'volatile' by hand. (b) Internal compiler errors: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110422 which are worked around by adding the extra empty 'asm' as a barrier, as in the original workaround. but the problem Sean sees may be a third thing since it involves bad code generation (not an ICE) even with the manually added 'volatile'. but the same old workaround works for this case, even if this feels a bit like voodoo programming and may only be hiding the issue. Reported-and-tested-by: Sean Christopherson <seanjc@google.com> Link: https://lore.kernel.org/all/20240208220604.140859-1-seanjc@google.com/ Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Uros Bizjak <ubizjak@gmail.com> Cc: Jakub Jelinek <jakub@redhat.com> Cc: Andrew Pinski <quic_apinski@quicinc.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
…p/linux-ntfs3 Pull ntfs3 fixes from Konstantin Komarov: "Fixed: - size update for compressed file - some logic errors, overflows - memory leak - some code was refactored Added: - implement super_operations::shutdown Improved: - alternative boot processing - reduced stack usage" * tag 'ntfs3_for_6.8' of https://github.com/Paragon-Software-Group/linux-ntfs3: (28 commits) fs/ntfs3: Slightly simplify ntfs_inode_printk() fs/ntfs3: Add ioctl operation for directories (FITRIM) fs/ntfs3: Fix oob in ntfs_listxattr fs/ntfs3: Fix an NULL dereference bug fs/ntfs3: Update inode->i_size after success write into compressed file fs/ntfs3: Fixed overflow check in mi_enum_attr() fs/ntfs3: Correct function is_rst_area_valid fs/ntfs3: Use i_size_read and i_size_write fs/ntfs3: Prevent generic message "attempt to access beyond end of device" fs/ntfs3: use non-movable memory for ntfs3 MFT buffer cache fs/ntfs3: Use kvfree to free memory allocated by kvmalloc fs/ntfs3: Disable ATTR_LIST_ENTRY size check fs/ntfs3: Fix c/mtime typo fs/ntfs3: Add NULL ptr dereference checking at the end of attr_allocate_frame() fs/ntfs3: Add and fix comments fs/ntfs3: ntfs3_forced_shutdown use int instead of bool fs/ntfs3: Implement super_operations::shutdown fs/ntfs3: Drop suid and sgid bits as a part of fpunch fs/ntfs3: Add file_modified fs/ntfs3: Correct use bh_read ...
Pull ceph fixes from Ilya Dryomov: "Some fscrypt-related fixups (sparse reads are used only for encrypted files) and two cap handling fixes from Xiubo and Rishabh" * tag 'ceph-for-6.8-rc4' of https://github.com/ceph/ceph-client: ceph: always check dir caps asynchronously ceph: prevent use-after-free in encode_cap_msg() ceph: always set initial i_blkbits to CEPH_FSCRYPT_BLOCK_SHIFT libceph: just wait for more data to be available on the socket libceph: rename read_sparse_msg_*() to read_partial_sparse_msg_*() libceph: fail sparse-read if the data length doesn't match
…cifs-2.6 Pull smb client fixes from Steve French: - reconnect fix - multichannel channel selection fix - minor mount warning fix - reparse point fix - null pointer check improvement * tag '6.8-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: smb3: clarify mount warning cifs: handle cases where multiple sessions share connection cifs: change tcon status when need_reconnect is set on it smb: client: set correct d_type for reparse points under DFS mounts smb3: add missing null server pointer check
…it/jejb/scsi Pull SCSI fixes from James Bottomley: "Three small driver fixes and one core fix. The core fix being a fixup to the one in the last pull request which didn't entirely move checking of scsi_host_busy() out from under the host lock" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: core: Remove the ufshcd_release() in ufshcd_err_handling_prepare() scsi: ufs: core: Fix shift issue in ufshcd_clear_cmd() scsi: lpfc: Use unsigned type for num_sge scsi: core: Move scsi_host_busy() out of host lock if it is for per-command
Pull smb server fixes from Steve French: "Two ksmbd server fixes: - memory leak fix - a minor kernel-doc fix" * tag '6.8-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd: ksmbd: free aux buffer if ksmbd_iov_pin_rsp_read fails ksmbd: Add kernel-doc for ksmbd_extract_sharename() function
…nux/kernel/git/ieee1394/linux1394 Pull firewire fix from Takashi Sakamoto: "A change to accelerate the device detection step in some cases. In the self-identification step after bus-reset, all nodes in the same bus broadcast selfID packet including the value of gap count. The value is related to the cable hops between nodes, and used to calculate the subaction gap and the arbitration reset gap. When each node has the different value of the gap count, the asynchronous communication between them is unreliable, since an asynchronous transaction could be interrupted by another asynchronous transaction before completion. The gap count inconsistency can be resolved by several ways; e.g. the transfer of PHY configuration packet and generation of bus-reset. The current implementation of firewire stack can correctly detect the gap count inconsistency, however the recovery action from the inconsistency tends to be delayed after reading configuration ROM of root node. This results in the long time to probe devices in some combinations of hardware. Here the stack is changed to schedule the action as soon as possible" * tag 'firewire-fixes-6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: core: send bus reset promptly on gap count error
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Update a potentially stale firmware attribute (Maurizio)
- Fixes for the recent verbose error logging (Keith, Chaitanya)
- Protection information payload size fix for passthrough (Francis)
- Fix for a queue freezing issue in virtblk (Yi)
- blk-iocost underflow fix (Tejun)
- blk-wbt task detection fix (Jan)
* tag 'block-6.8-2024-02-10' of git://git.kernel.dk/linux:
virtio-blk: Ensure no requests in virtqueues before deleting vqs.
blk-iocost: Fix an UBSAN shift-out-of-bounds warning
nvme: use ns->head->pi_size instead of t10_pi_tuple structure size
nvme-core: fix comment to reflect right functions
nvme: move passthrough logging attribute to head
blk-wbt: Fix detection of dirty-throttled tasks
nvme-host: fix the updating of the firmware version
…rg/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "21 hotfixes. 12 are cc:stable and the remainder pertain to post-6.7 issues or aren't considered to be needed in earlier kernel versions" * tag 'mm-hotfixes-stable-2024-02-10-11-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits) nilfs2: fix potential bug in end_buffer_async_write mm/damon/sysfs-schemes: fix wrong DAMOS tried regions update timeout setup nilfs2: fix hang in nilfs_lookup_dirty_data_buffers() MAINTAINERS: Leo Yan has moved mm/zswap: don't return LRU_SKIP if we have dropped lru lock fs,hugetlb: fix NULL pointer dereference in hugetlbs_fill_super mailmap: switch email address for John Moon mm: zswap: fix objcg use-after-free in entry destruction mm/madvise: don't forget to leave lazy MMU mode in madvise_cold_or_pageout_pte_range() arch/arm/mm: fix major fault accounting when retrying under per-VMA lock selftests: core: include linux/close_range.h for CLOSE_RANGE_* macros mm/memory-failure: fix crash in split_huge_page_to_list from soft_offline_page mm: memcg: optimize parent iteration in memcg_rstat_updated() nilfs2: fix data corruption in dsync block recovery for small block sizes mm/userfaultfd: UFFDIO_MOVE implementation should use ptep_get() exit: wait_task_zombie: kill the no longer necessary spin_lock_irq(siglock) fs/proc: do_task_stat: use sig->stats_lock to gather the threads/children stats fs/proc: do_task_stat: move thread_group_cputime_adjusted() outside of lock_task_sighand() getrusage: use sig->stats_lock rather than lock_task_sighand() getrusage: move thread_group_cputime_adjusted() outside of lock_task_sighand() ...
…inux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Correct the minimum CPU family for Transmeta Crusoe in Kconfig so
that such hw can boot again
- Do not take into accout XSTATE buffer size info supplied by userspace
when constructing a sigreturn frame
- Switch get_/put_user* to EX_TYPE_UACCESS exception handling when an
MCE is encountered so that it can be properly recovered from instead
of simply panicking
* tag 'x86_urgent_for_v6.8_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/Kconfig: Transmeta Crusoe is CPU family 5, not 6
x86/fpu: Stop relying on userspace for info to fault in xsave buffer
x86/lib: Revert to _ASM_EXTABLE_UA() for {get,put}_user() fixups
…m/linux/kernel/git/tip/tip Pull timer fix from Borislav Petkov: - Make sure a warning is issued when a hrtimer gets queued after the timers have been migrated on the CPU down path and thus said timer will get ignored * tag 'timers_urgent_for_v6.8_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: hrtimer: Report offline hrtimer enqueue
Linux 6.8-rc4
Signed-off-by: David Vernet <void@manifault.com>
htejun
pushed a commit
that referenced
this pull request
Feb 14, 2024
The QXL driver doesn't use any device for DMA mappings or allocations so dev_to_node() will panic inside ttm_device_init() on NUMA systems: general protection fault, probably for non-canonical address 0xdffffc000000007a: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x00000000000003d0-0x00000000000003d7] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.7.0+ #9 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 RIP: 0010:ttm_device_init+0x10e/0x340 Call Trace: qxl_ttm_init+0xaa/0x310 qxl_device_init+0x1071/0x2000 qxl_pci_probe+0x167/0x3f0 local_pci_probe+0xe1/0x1b0 pci_device_probe+0x29d/0x790 really_probe+0x251/0x910 __driver_probe_device+0x1ea/0x390 driver_probe_device+0x4e/0x2e0 __driver_attach+0x1e3/0x600 bus_for_each_dev+0x12d/0x1c0 bus_add_driver+0x25a/0x590 driver_register+0x15c/0x4b0 qxl_pci_driver_init+0x67/0x80 do_one_initcall+0xf5/0x5d0 kernel_init_freeable+0x637/0xb10 kernel_init+0x1c/0x2e0 ret_from_fork+0x48/0x80 ret_from_fork_asm+0x1b/0x30 RIP: 0010:ttm_device_init+0x10e/0x340 Fall back to NUMA_NO_NODE if there is no device for DMA. Found by Linux Verification Center (linuxtesting.org). Fixes: b0a7ce5 ("drm/ttm: Schedule delayed_delete worker closer") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Reviewed-by: Christian König <christian.koenig@amd.com> Reported-by: Steven Rostedt <rostedt@goodmis.org> Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Byte-Lab
pushed a commit
that referenced
this pull request
Feb 26, 2024
A recent change in acp_irq_thread() was meant to address a potential race condition while trying to acquire the hardware semaphore responsible for the synchronization between firmware and host IPC interrupts. This resulted in an improper use of the IPC spinlock, causing normal kernel memory allocations (which may sleep) inside atomic contexts: 1707255557.133976 kernel: BUG: sleeping function called from invalid context at include/linux/sched/mm.h:315 ... 1707255557.134757 kernel: sof_ipc3_rx_msg+0x70/0x130 [snd_sof] 1707255557.134793 kernel: acp_sof_ipc_irq_thread+0x1e0/0x550 [snd_sof_amd_acp] 1707255557.134855 kernel: acp_irq_thread+0xa3/0x130 [snd_sof_amd_acp] 1707255557.134904 kernel: ? irq_thread+0xb5/0x1e0 1707255557.134947 kernel: ? __pfx_irq_thread_fn+0x10/0x10 1707255557.134985 kernel: irq_thread_fn+0x23/0x60 Moreover, there are attempts to lock a mutex from the same atomic context: 1707255557.136357 kernel: ============================= 1707255557.136393 kernel: [ BUG: Invalid wait context ] 1707255557.136413 kernel: 6.8.0-rc3-next-20240206-audio-next #9 Tainted: G W 1707255557.136432 kernel: ----------------------------- 1707255557.136451 kernel: irq/66-AudioDSP/502 is trying to lock: 1707255557.136470 kernel: ffff965152f26af8 (&sb->s_type->i_mutex_key#2){+.+.}-{3:3}, at: start_creating.part.0+0x5f/0x180 ... 1707255557.137429 kernel: start_creating.part.0+0x5f/0x180 1707255557.137457 kernel: __debugfs_create_file+0x61/0x210 1707255557.137475 kernel: snd_sof_debugfs_io_item+0x75/0xc0 [snd_sof] 1707255557.137494 kernel: sof_ipc3_do_rx_work+0x7cf/0x9f0 [snd_sof] 1707255557.137513 kernel: sof_ipc3_rx_msg+0xb3/0x130 [snd_sof] 1707255557.137532 kernel: acp_sof_ipc_irq_thread+0x1e0/0x550 [snd_sof_amd_acp] 1707255557.137551 kernel: acp_irq_thread+0xa3/0x130 [snd_sof_amd_acp] Fix the issues by reducing the lock scope in acp_irq_thread(), so that it guards only the hardware semaphore acquiring attempt. Additionally, restore the initial locking in acp_sof_ipc_irq_thread() to synchronize the handling of immediate replies from DSP core. Fixes: 802134c ("ASoC: SOF: amd: Refactor spinlock_irq(&sdev->ipc_lock) sequence in irq_handler") Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Link: https://lore.kernel.org/r/20240208234315.2182048-1-cristian.ciocaltea@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
Byte-Lab
pushed a commit
that referenced
this pull request
Feb 26, 2024
…lblished(). syzkaller reported a warning [0] in inet_csk_destroy_sock() with no repro. WARN_ON(inet_sk(sk)->inet_num && !inet_csk(sk)->icsk_bind_hash); However, the syzkaller's log hinted that connect() failed just before the warning due to FAULT_INJECTION. [1] When connect() is called for an unbound socket, we search for an available ephemeral port. If a bhash bucket exists for the port, we call __inet_check_established() or __inet6_check_established() to check if the bucket is reusable. If reusable, we add the socket into ehash and set inet_sk(sk)->inet_num. Later, we look up the corresponding bhash2 bucket and try to allocate it if it does not exist. Although it rarely occurs in real use, if the allocation fails, we must revert the changes by check_established(). Otherwise, an unconnected socket could illegally occupy an ehash entry. Note that we do not put tw back into ehash because sk might have already responded to a packet for tw and it would be better to free tw earlier under such memory presure. [0]: WARNING: CPU: 0 PID: 350830 at net/ipv4/inet_connection_sock.c:1193 inet_csk_destroy_sock (net/ipv4/inet_connection_sock.c:1193) Modules linked in: Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:inet_csk_destroy_sock (net/ipv4/inet_connection_sock.c:1193) Code: 41 5c 41 5d 41 5e e9 2d 4a 3d fd e8 28 4a 3d fd 48 89 ef e8 f0 cd 7d ff 5b 5d 41 5c 41 5d 41 5e e9 13 4a 3d fd e8 0e 4a 3d fd <0f> 0b e9 61 fe ff ff e8 02 4a 3d fd 4c 89 e7 be 03 00 00 00 e8 05 RSP: 0018:ffffc9000b21fd38 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000009e78 RCX: ffffffff840bae40 RDX: ffff88806e46c600 RSI: ffffffff840bb012 RDI: ffff88811755cca8 RBP: ffff88811755c880 R08: 0000000000000003 R09: 0000000000000000 R10: 0000000000009e78 R11: 0000000000000000 R12: ffff88811755c8e0 R13: ffff88811755c892 R14: ffff88811755c918 R15: 0000000000000000 FS: 00007f03e5243800(0000) GS:ffff88811ae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32f21000 CR3: 0000000112ffe001 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> ? inet_csk_destroy_sock (net/ipv4/inet_connection_sock.c:1193) dccp_close (net/dccp/proto.c:1078) inet_release (net/ipv4/af_inet.c:434) __sock_release (net/socket.c:660) sock_close (net/socket.c:1423) __fput (fs/file_table.c:377) __fput_sync (fs/file_table.c:462) __x64_sys_close (fs/open.c:1557 fs/open.c:1539 fs/open.c:1539) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129) RIP: 0033:0x7f03e53852bb Code: 03 00 00 00 0f 05 48 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 43 c9 f5 ff 8b 7c 24 0c 41 89 c0 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 89 44 24 0c e8 a1 c9 f5 ff 8b 44 RSP: 002b:00000000005dfba0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003 RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007f03e53852bb RDX: 0000000000000002 RSI: 0000000000000002 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000000 R09: 000000000000167c R10: 0000000008a79680 R11: 0000000000000293 R12: 00007f03e4e43000 R13: 00007f03e4e43170 R14: 00007f03e4e43178 R15: 00007f03e4e43170 </TASK> [1]: FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 0 CPU: 0 PID: 350833 Comm: syz-executor.1 Not tainted 6.7.0-12272-g2121c43f88f5 #9 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:107 (discriminator 1)) should_fail_ex (lib/fault-inject.c:52 lib/fault-inject.c:153) should_failslab (mm/slub.c:3748) kmem_cache_alloc (mm/slub.c:3763 mm/slub.c:3842 mm/slub.c:3867) inet_bind2_bucket_create (net/ipv4/inet_hashtables.c:135) __inet_hash_connect (net/ipv4/inet_hashtables.c:1100) dccp_v4_connect (net/dccp/ipv4.c:116) __inet_stream_connect (net/ipv4/af_inet.c:676) inet_stream_connect (net/ipv4/af_inet.c:747) __sys_connect_file (net/socket.c:2048 (discriminator 2)) __sys_connect (net/socket.c:2065) __x64_sys_connect (net/socket.c:2072) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129) RIP: 0033:0x7f03e5284e5d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48 RSP: 002b:00007f03e4641cc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 00000000004bbf80 RCX: 00007f03e5284e5d RDX: 0000000000000010 RSI: 0000000020000000 RDI: 0000000000000003 RBP: 00000000004bbf80 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 R13: 000000000000000b R14: 00007f03e52e5530 R15: 0000000000000000 </TASK> Reported-by: syzkaller <syzkaller@googlegroups.com> Fixes: 28044fc ("net: Add a bhash2 table hashed by port and address") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Byte-Lab
pushed a commit
that referenced
this pull request
Mar 8, 2024
(1 << idx) of int is not desired when setting bits in unsigned long overflowed_ctrs, use BIT() instead. This panic happens when running 'perf record -e branches' on sophgo sg2042. [ 273.311852] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098 [ 273.320851] Oops [#1] [ 273.323179] Modules linked in: [ 273.326303] CPU: 0 PID: 1475 Comm: perf Not tainted 6.6.0-rc3+ #9 [ 273.332521] Hardware name: Sophgo Mango (DT) [ 273.336878] epc : riscv_pmu_ctr_get_width_mask+0x8/0x62 [ 273.342291] ra : pmu_sbi_ovf_handler+0x2e0/0x34e [ 273.347091] epc : ffffffff80aecd98 ra : ffffffff80aee056 sp : fffffff6e36928b0 [ 273.354454] gp : ffffffff821f82d0 tp : ffffffd90c353200 t0 : 0000002ade4f9978 [ 273.361815] t1 : 0000000000504d55 t2 : ffffffff8016cd8c s0 : fffffff6e3692a70 [ 273.369180] s1 : 0000000000000020 a0 : 0000000000000000 a1 : 00001a8e81800000 [ 273.376540] a2 : 0000003c00070198 a3 : 0000003c00db75a4 a4 : 0000000000000015 [ 273.383901] a5 : ffffffd7ff8804b0 a6 : 0000000000000015 a7 : 000000000000002a [ 273.391327] s2 : 000000000000ffff s3 : 0000000000000000 s4 : ffffffd7ff8803b0 [ 273.398773] s5 : 0000000000504d55 s6 : ffffffd905069800 s7 : ffffffff821fe210 [ 273.406139] s8 : 000000007fffffff s9 : ffffffd7ff8803b0 s10: ffffffd903f29098 [ 273.413660] s11: 0000000080000000 t3 : 0000000000000003 t4 : ffffffff8017a0ca [ 273.421022] t5 : ffffffff8023cfc2 t6 : ffffffd9040780e8 [ 273.426437] status: 0000000200000100 badaddr: 0000000000000098 cause: 000000000000000d [ 273.434512] [<ffffffff80aecd98>] riscv_pmu_ctr_get_width_mask+0x8/0x62 [ 273.441169] [<ffffffff80076bd8>] handle_percpu_devid_irq+0x98/0x1ee [ 273.447562] [<ffffffff80071158>] generic_handle_domain_irq+0x28/0x36 [ 273.454151] [<ffffffff8047a99a>] riscv_intc_irq+0x36/0x4e [ 273.459659] [<ffffffff80c944de>] handle_riscv_irq+0x4a/0x74 [ 273.465442] [<ffffffff80c94c48>] do_irq+0x62/0x92 [ 273.470360] Code: 0420 60a2 6402 5529 0141 8082 0013 0000 0013 0000 (6d5c) b783 [ 273.477921] ---[ end trace 0000000000000000 ]--- [ 273.482630] Kernel panic - not syncing: Fatal exception in interrupt Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Fei Wu <fei2.wu@intel.com> Link: https://lore.kernel.org/r/20240228115425.2613856-1-fei2.wu@intel.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Byte-Lab
pushed a commit
that referenced
this pull request
Mar 28, 2024
…-maps'
Eduard Zingerman says:
====================
libbpf: type suffixes and autocreate flag for struct_ops maps
Tweak struct_ops related APIs to allow the following features:
- specify version suffixes for stuct_ops map types;
- share same BPF program between several map definitions with
different local BTF types, assuming only maps with same
kernel BTF type would be selected for load;
- toggle autocreate flag for struct_ops maps;
- automatically toggle autoload for struct_ops programs referenced
from struct_ops maps, depending on autocreate status of the
corresponding map;
- use SEC("?.struct_ops") and SEC("?.struct_ops.link")
to define struct_ops maps with autocreate == false after object open.
This would allow loading programs like below:
SEC("struct_ops/foo") int BPF_PROG(foo) { ... }
SEC("struct_ops/bar") int BPF_PROG(bar) { ... }
struct bpf_testmod_ops___v1 {
int (*foo)(void);
};
struct bpf_testmod_ops___v2 {
int (*foo)(void);
int (*bar)(void);
};
/* Assume kernel type name to be 'test_ops' */
SEC(".struct_ops.link")
struct test_ops___v1 map_v1 = {
/* Program 'foo' shared by maps with
* different local BTF type
*/
.foo = (void *)foo
};
SEC(".struct_ops.link")
struct test_ops___v2 map_v2 = {
.foo = (void *)foo,
.bar = (void *)bar
};
Assuming the following tweaks are done before loading:
/* to load v1 */
bpf_map__set_autocreate(skel->maps.map_v1, true);
bpf_map__set_autocreate(skel->maps.map_v2, false);
/* to load v2 */
bpf_map__set_autocreate(skel->maps.map_v1, false);
bpf_map__set_autocreate(skel->maps.map_v2, true);
Patch #8 ties autocreate and autoload flags for struct_ops maps and
programs.
Changelog:
- v3 [3] -> v4:
- changes for multiple styling suggestions from Andrii;
- patch #5: libbpf log capture now happens for LIBBPF_INFO and
LIBBPF_WARN messages and does not depend on verbosity flags
(Andrii);
- patch #6: fixed runtime crash caused by conflict with newly added
test case struct_ops_multi_pages;
- patch #7: fixed free of possibly uninitialized pointer (Daniel)
- patch #8: simpler algorithm to detect which programs to autoload
(Andrii);
- patch #9: added assertions for autoload flag after object load
(Andrii);
- patch #12: DATASEC name rewrite in libbpf is now done inplace, no
new strings added to BTF (Andrii);
- patch #14: allow any printable characters in DATASEC names when
kernel validates BTF (Andrii)
- v2 [2] -> v3:
- moved patch #8 logic to be fully done on load
(requested by Andrii in offlist discussion);
- in patch #9 added test case for shadow vars and
autocreate/autoload interaction.
- v1 [1] -> v2:
- fixed memory leak in patch #1 (Kui-Feng);
- improved error messages in patch #2 (Martin, Andrii);
- in bad_struct_ops selftest from patch #6 added .test_2
map member setup (David);
- added utility functions to capture libbpf log from selftests (David)
- in selftests replaced usage of ...__open_and_load by separate
calls to ..._open() and ..._load() (Andrii);
- removed serial_... in selftest definitions (Andrii);
- improved comments in selftest struct_ops_autocreate
from patch #7 (David);
- removed autoload toggling logic incompatible with shadow variables
from bpf_map__set_autocreate(), instead struct_ops programs
autoload property is computed at struct_ops maps load phase,
see patch #8 (Kui-Feng, Martin, Andrii);
- added support for SEC("?.struct_ops") and SEC("?.struct_ops.link")
(Andrii).
[1] https://lore.kernel.org/bpf/20240227204556.17524-1-eddyz87@gmail.com/
[2] https://lore.kernel.org/bpf/20240302011920.15302-1-eddyz87@gmail.com/
[3] https://lore.kernel.org/bpf/20240304225156.24765-1-eddyz87@gmail.com/
====================
Link: https://lore.kernel.org/r/20240306104529.6453-1-eddyz87@gmail.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
htejun
pushed a commit
that referenced
this pull request
Mar 28, 2024
In commit d02c48f ("bpf: Make struct task_struct an RCU-safe type"), bpf_task_acquire() was updated to be KF_RET_NULL. Eishun pointed out that the userland example scheduler no longer loads, and it's because the usersched_task() helper function in scx_example_userland originally used bpf_get_current_task_btf() to avoid having to do a NULL check in the caller, but this no longer works due to bpf_task_acquire() being NULL-able. Let's just remove that weird logic that used bpf_get_current_task_btf(). When bpf_assert() lands, we can just use that to simplify instead. Fixes issue #9 Signed-off-by: David Vernet <void@manifault.com>
htejun
pushed a commit
that referenced
this pull request
Mar 28, 2024
Andrii Nakryiko says: ==================== BPF register bounds logic and testing improvements This patch set adds a big set of manual and auto-generated test cases validating BPF verifier's register bounds tracking and deduction logic. See details in the last patch. We start with building a tester that validates existing <range> vs <scalar> verifier logic for range bounds. To make all this work, BPF verifier's logic needed a bunch of improvements to handle some cases that previously were not covered. This had no implications as to correctness of verifier logic, but it was incomplete enough to cause significant disagreements with alternative implementation of register bounds logic that tests in this patch set implement. So we need BPF verifier logic improvements to make all the tests pass. This is what we do in patches #3 through #9. The end goal of this work, though, is to extend BPF verifier range state tracking such as to allow to derive new range bounds when comparing non-const registers. There is some more investigative work required to investigate and fix existing potential issues with range tracking as part of ALU/ALU64 operations, so <range> x <range> part of v5 patch set ([0]) is dropped until these issues are sorted out. For now, we include preparatory refactorings and clean ups, that set up BPF verifier code base to extend the logic to <range> vs <range> logic in subsequent patch set. Patches #10-#16 perform preliminary refactorings without functionally changing anything. But they do clean up check_cond_jmp_op() logic and generalize a bunch of other pieces in is_branch_taken() logic. [0] https://patchwork.kernel.org/project/netdevbpf/list/?series=797178&state=* v5->v6: - dropped <range> vs <range> patches (original patches #18 through #23) to add more register range sanity checks and fix preexisting issues; - comments improvements, addressing other feedback on first 17 patches (Eduard, Alexei); v4->v5: - added entirety of verifier reg bounds tracking changes, now handling <range> vs <range> cases (Alexei); - added way more comments trying to explain why deductions added are correct, hopefully they are useful and clarify things a bit (Daniel, Shung-Hsi); - added two preliminary selftests fixes necessary for RELEASE=1 build to work again, it keeps breaking. v3->v4: - improvements to reg_bounds tester (progress report, split 32-bit and 64-bit ranges, fix various verbosity output issues, etc); v2->v3: - fix a subtle little-endianness assumption inside parge_reg_state() (CI); v1->v2: - fix compilation when building selftests with llvm-16 toolchain (CI). ==================== Link: https://lore.kernel.org/r/20231102033759.2541186-1-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Byte-Lab
pushed a commit
that referenced
this pull request
Apr 12, 2024
The driver creates /sys/kernel/debug/dri/0/mob_ttm even when the corresponding ttm_resource_manager is not allocated. This leads to a crash when trying to read from this file. Add a check to create mob_ttm, system_mob_ttm, and gmr_ttm debug file only when the corresponding ttm_resource_manager is allocated. crash> bt PID: 3133409 TASK: ffff8fe4834a5000 CPU: 3 COMMAND: "grep" #0 [ffffb954506b3b20] machine_kexec at ffffffffb2a6bec3 #1 [ffffb954506b3b78] __crash_kexec at ffffffffb2bb598a #2 [ffffb954506b3c38] crash_kexec at ffffffffb2bb68c1 #3 [ffffb954506b3c50] oops_end at ffffffffb2a2a9b1 #4 [ffffb954506b3c70] no_context at ffffffffb2a7e913 #5 [ffffb954506b3cc8] __bad_area_nosemaphore at ffffffffb2a7ec8c #6 [ffffb954506b3d10] do_page_fault at ffffffffb2a7f887 #7 [ffffb954506b3d40] page_fault at ffffffffb360116e [exception RIP: ttm_resource_manager_debug+0x11] RIP: ffffffffc04afd11 RSP: ffffb954506b3df0 RFLAGS: 00010246 RAX: ffff8fe41a6d1200 RBX: 0000000000000000 RCX: 0000000000000940 RDX: 0000000000000000 RSI: ffffffffc04b4338 RDI: 0000000000000000 RBP: ffffb954506b3e08 R8: ffff8fee3ffad000 R9: 0000000000000000 R10: ffff8fe41a76a000 R11: 0000000000000001 R12: 00000000ffffffff R13: 0000000000000001 R14: ffff8fe5bb6f3900 R15: ffff8fe41a6d1200 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ffffb954506b3e00] ttm_resource_manager_show at ffffffffc04afde7 [ttm] #9 [ffffb954506b3e30] seq_read at ffffffffb2d8f9f3 RIP: 00007f4c4eda8985 RSP: 00007ffdbba9e9f8 RFLAGS: 00000246 RAX: ffffffffffffffda RBX: 000000000037e000 RCX: 00007f4c4eda8985 RDX: 000000000037e000 RSI: 00007f4c41573000 RDI: 0000000000000003 RBP: 000000000037e000 R8: 0000000000000000 R9: 000000000037fe30 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f4c41573000 R13: 0000000000000003 R14: 00007f4c41572010 R15: 0000000000000003 ORIG_RAX: 0000000000000000 CS: 0033 SS: 002b Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Fixes: af4a25b ("drm/vmwgfx: Add debugfs entries for various ttm resource managers") Cc: <stable@vger.kernel.org> Reviewed-by: Zack Rusin <zack.rusin@broadcom.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240312093551.196609-1-jfalempe@redhat.com
Byte-Lab
pushed a commit
that referenced
this pull request
Apr 12, 2024
Petr Machata says: ==================== selftests: Fixes for kernel CI As discussed on the bi-weekly call on Jan 30, and in mailing around kernel CI effort, some changes are desirable in the suite of forwarding selftests the better to work with the CI tooling. Namely: - The forwarding selftests use a configuration file where names of interfaces are defined and various variables can be overridden. There is also forwarding.config.sample that users can use as a template to refer to when creating the config file. What happens a fair bit is that users either do not know about this at all, or simply forget, and are confused by cryptic failures about interfaces that cannot be created. In patches #1 - #3 have lib.sh just be the single source of truth with regards to which variables exist. That includes the topology variables which were previously only in the sample file, and any "tweak variables", such as what tools to use, sleep times, etc. forwarding.config.sample then becomes just a placeholder with a couple examples. Unless specific HW should be exercised, or specific tools used, the defaults are usually just fine. - Several net/forwarding/ selftests (and one net/ one) cannot be run on veth pairs, they need an actual HW interface to run on. They are generic in the sense that any capable HW should pass them, which is why they have been put to net/forwarding/ as opposed to drivers/net/, but they do not generalize to veth. The fact that these tests are in net/forwarding/, but still complaining when run, is confusing. In patches #4 - #6 move these tests to a new directory drivers/net/hw. - The following patches extend the codebase to handle well test results other than pass and fail. Patch #7 is preparatory. It converts several log_test_skip to XFAIL, so that tests do not spuriously end up returning non-0 when they are not supposed to. In patches #8 - #10, introduce some missing ksft constants, then support having those constants in RET, and then finally in EXIT_STATUS. - The traffic scheduler tests generate a large amount of network traffic to test the behavior of the scheduler. This demands a relatively high-performance computer. On slow machines, such as with a debugging kernel, the test would spuriously fail. It can still be useful to "go through the motions" though, to possibly catch bugs in setup of the scheduler graph and passing packets around. Thus we still want to run the tests, just with lowered demands. To that end, in patches #11 - #12, introduce an environment variable KSFT_MACHINE_SLOW, with obvious meaning. Tests can then make checks more lenient, such as mark failures as XFAIL. A helper, xfail_on_slow, is provided to mark performance-sensitive parts of the selftest. - In patch #13, use a similar mechanism to mark a NH group stats selftest to XFAIL HW stats tests when run on VETH pairs. - All these changes complicate the hitherto straightforward logging and checking logic, so in patch #14, add a selftest that checks this functionality in lib.sh. v1 (vs. an RFC circulated through linux-kselftest): - Patch #9: - Clarify intended usage by s/set_ret/ret_set_ksft_status/, s/nret/ksft_status/ ==================== Link: https://lore.kernel.org/r/cover.1711464583.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Byte-Lab
pushed a commit
that referenced
this pull request
Apr 23, 2024
vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e #3 [fffffe00003fced0] do_nmi at ffffffff8922660d #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #5 [ffffa655314979e8] io_serial_in at ffffffff89792594 #6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 #7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 #8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 #9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 #10 [ffffa65531497ac8] console_unlock at ffffffff89316124 #11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 #12 [ffffa65531497b68] printk at ffffffff89318306 #13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 #14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] #15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] #16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] #17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] #18 [ffffa65531497f10] kthread at ffffffff892d2e72 #19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <lei.chen@smartx.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240415020247.2207781-1-lei.chen@smartx.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
There seems to be an issue with BPF not being able to load the maximal scheduler anymore. It looks like it's not counting the size of the trampoline correctly. Will report to BPF folks.