ScioSense ENS210

Arduino library for the ENS210 temperature & humidity sensor with I2C interface from ScioSense It is based on a library written by Maarten Pennings. Thanks for all the work. https://github.com/maarten-pennings/ENS210

⚠️ This library is deprecated and no longer maintained. Kindly refer to its successor: ens21x-arduino.

Introduction

This project is an Arduino library. It implements a driver with examples for the ENS210. The ENS210 chip is a digital temperature & humidity sensor with an I2C interface.

The driver in this Arduino library is based on the code supplied by Sciosense, the manufacturer of the chip.

Note that the ENS210 requires a supply voltage of 1.71V .. 3.60V.

Links

The ENS210 is made by Sciosense.

• The datasheet and further documents regading the ENS210 can be downloaded here https://www.sciosense.com/products/relative-humidity-and-temperature-sensors/ens210-relative-humidity-and-temperature-sensor/

Prerequisites

It is assumed that

• The Arduino IDE has been installed. If not, refer to "Install the Arduino Desktop IDE" on the Arduino site.
• The library directory is at its default location. For me, that is C:\Users\sciosense\Documents\Arduino\libraries.

Installation

Installation steps

• Visit the project page for the Arduino CCS811 library.
• Click the green button Clone or download on the right side.
• From the pop-up choose Download ZIP.
• In Arduino IDE, select Sketch > Include Library > Manage Libraries ... and browse to the just downloaded ZIP file.
• When the IDE is ready this README.md should be located at e.g. C:\Users\sciosense\Documents\Arduino\libraries\ScioSense_ENS210\README.md.

Build an example

To build an example sketch

• (Re)start Arduino.
• Open File > Example > Examples from Custom Libraries > ENS210 > ENS210basic.
• Make sure Tools > Board lists the correct board.
• Select Sketch > Verify/Compile.

ScioSense is a Joint Venture of ams AG